Answer:
I think it would be Yellow
A wave in which particles of matter vibrate at right angles to the direction
the wave travels is called a(n) wave.
Enter the answer
Check It
Answer:
it will transverse wave I think it will help you
Can someone help
Me out pls if your good at chemistry
why do stars appear to be bigger in the night?
Answer: in the daytime the sun is out so the stars are not visible becuase the suns reflection! At night When you gaze at the constellations, every star produces an image that's the same size, but your retina isn't sensitive enough to respond to the outer parts of those images except for the brighter stars — which therefore look bigger than the fainter ones.
Explanation:
This is what I found on goog.le a while ago now it might actually help if I’m wrong I apologiz, I hope this was your quistion!
What are the homologous series?
Explanation:
Homologous series are the series belonging to a series of aliphatic organic compounds that differ only by the addition of a CH2 group
Hope it will help :)❤
A model that describes the formation, ______________, and reformation of rocks.
3. A property of acids is that they taste sour. A
property of bases is that they feel slippery. Would
you use either of these properties to identify an
unknown substance? Why or why not?
Explanation:
Touching or tasting these unknown substances could be lethal or cause severe burns to your skin, so it is advisable to use other methods to identify substances.
Hellppppppppplplllppp
Answer:
the third one because oceans don't affect the weather
Explanation:
Apollo 11 made a ______ landing.
Answer:
Apollo 11 made a capsule landing
Explanation:
Answer: i don’t know what type of landing you mean
Explanation:
They did a lunar landing then reentry and then capsule landing.
Which element below would most likely gain 3 electrons?
Answer:
Lithium
Explanation:
Pls predict and balance the following Chemical equations 30points (5 per question)
Will mark Brainliest
1. Na2(SO4) (aq) + Ba(NO3)2(aq) -->
2. Na(NO3)(aq) + NH4Cl(aq) -->
4. ZnCl2 (aq) + K (SO4) (aq) -->
5. ZnCl2 (aq) + Na2S (aq) -->
6. Na(C2H3O2) (aq) + Ag(NO3) (aq) -->
Answer:
1. Na2SO4 + Ba(NO3)2 → NaNO3 + BaSO4
2. NaNO3 + NH4Cl → NaCl + NH4NO3
4. Sorry, I don't know
5. Refer to the attachment..
6. NaC2H3O2(aq) + AgNO3(aq) = NaNO3(aq) + AgC2H3O2
Hope it can help you and please mark me as a brainlist...[tex] \huge{\blue{Thank \: you}}[/tex]
a compound has hydrogen ion and nitrate ion in solutionstate what is the name of that compound
Answer:
This compound is HNO2
Explanation:
HNO2 ----> H+ + NO2
When metals and non metals combine in fixed proportion then a chemical compound is formed So, the compound that will be formed from hydrogen ion and nitrate ion is Hydrogen nitrate.
What is chemical formula?
Chemical formula is a formula where cation and anion combine to form a molecule in fixed proportion. Metals combine in form of cation and non metals combine in form of anion.
Cation is the species that give electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral, the charge over cation and anion is also called oxidation state.
Therefore, the compound that will be formed from hydrogen ion and nitrate ion is Hydrogen nitrate.
To learn more about Chemical formula, here:
https://brainly.com/question/28522480
#SPJ2
How do you calculate the percent composition of an element in a compound
Answer:
Percent composition is calculated from a molecular formula by dividing the mass of a single element in one mole of a compound by the mass of one mole of the entire compound. This value is presented as a percentage.
Explanation:
What can you determine about an element if you only know its group number on the periodic table?
A. The total number of protons and neutrons
B. The number of protons
C. The total number of electrons
D. The number of valance elctrons
Answer:
c
Explanation:
the rate of effusion of co2 gas through a porous barrier is observed to be 9.31x 10^-4 mol/h. under the same conditions, the rate of effusion of N2 gas would be _______ mol/h
Answer:
[tex]1.167\times 10^{-3}\ \text{mol/h}[/tex]
Explanation:
[tex]R_1[/tex] = Rate of diffusion of [tex]CO_2[/tex] = [tex]9.31\times 10^{-4}\ \text{mol/h}[/tex]
[tex]R_2[/tex] = Rate of diffusion of [tex]N_2[/tex]
[tex]M_1[/tex] = Molar mass of [tex]CO_2[/tex] = 44.01 g/mol
[tex]M_2[/tex] = Molar mass of [tex]N_2[/tex] = 28.0134 g/mol
From Graham's law we have the relation
[tex]\dfrac{R_1}{R_2}=\sqrt{\dfrac{M_2}{M_1}}\\\Rightarrow R_2=\dfrac{R_1}{\sqrt{\dfrac{M_2}{M_1}}}\\\Rightarrow R_2=\dfrac{9.31\times 10^{-4}}{\sqrt{\dfrac{28.0134}{44.01}}}\\\Rightarrow R_2=1.167\times 10^{-3}\ \text{mol/h}[/tex]
The rate of effusion of the [tex]N_2[/tex] gas would be [tex]1.167\times 10^{-3}\ \text{mol/h}[/tex].
84 pt =_____ qt
5.0 gal =_____ L
Answer:
84 pt =__50.4399___ qt
5.0 gal =___18.9271__ L
Explanation:
Have A Wonderful Day!!
Answer: 84 pints = 42 quarts
5.9 gallons = 1.89271
Explanation:
Star A and star B are the same distance away from earth. From earth, star A seems brighter than star B. Which star has the highest absolute brightness?
Answer:
Star B
Explanation:
Star B, this is because, usually in the discussions about stars, the more luminous star or say, the brighter star usually is the one that possesses the smaller absolute brightness.
That being said, succinctly put, if we have two stars A and star B, if star A is brighter than star B, then star A has a lower absolute brightness. Also, if star B is less brighter than star A, then it has the higher absolute brightness.
Answer:
STAR B
Explanation:
For work to be done on an object:
*
The work input must be equal to the work output
The energy input must be equal to the energy output
Only a force must be applied, moving the object is not required
The object has to move a distance when a force is applied to it
Answer:
The object has to move a distance when a force is applied to it
Explanation:
For work to be done on a body the force applied must move the body through a particular distance.
Work done = Force x distance
If no distance is moved by the force, no work is done.
Also, the angle between the force and the distance must be 0 to do the maximum work on the body.
I traveled for 0.5 hr at 80 km/h. How far did I travel?
Answer:
[tex]Distance = 40km[/tex]
Explanation:
Given
[tex]Speed = 80km/hr[/tex]
[tex]Time = 0.5hr[/tex]
Required
Determine the distance covered
Distance is calculated as:
[tex]Distance = Speed * Time[/tex]
Substitute values for Speed and Time
[tex]Distance = 80km/hr * 0.5hr[/tex]
[tex]Distance = 80km * 0.5[/tex]
[tex]Distance = 40km[/tex]
Hence, you travelled 40km
The chemical equation below shows the photosynthesis reaction.
6CO2 + 6H2O → C6H12O6 + 6O2
A reaction uses 528 g of CO2. How many grams of water are used in this reaction?
Answer:
12
Explanation:
what volume (in L) of ethane (C2H6) will be required to produce 42.5 L of carbon dioxide in the reaction below?
2C2H6(g)+7O2(g)->4CO2(g)+6H2O(g)
Answer:
21.25
Explanation:
hurry please Which of the following is a compound?
CO2
Ne
O2
P4
Answer:
p4
Explanation:
- Is energy absorbed or released by a material during the phase change from a solid to a liquid?
A)Absorbed
B)Released
Answer:
A) Abosrbed
Explanation:
The change is endothermic, meaning the material absorbs energy when it changes its phase from a solid to a liqiud.
Turning on your X-Box is an example of___ energy turning into ___ energy.
A.electrical,nuclear
B.nuclear,sound
C.electrical,light
D.electrical,chemical
Answer:
electrical --> light
Explanation:
Which products would form if chlorine gas was bubbled through a solution of sodium bromide?
a. Na and BrCl
b. Na snd BrCl2
c. Na and Br2
d. Na(cl)2 and Br2
Answer:
NaCl and Br2
Explanation:
Edge 2020
Answer:
The Answer is C: Na and Br3
Explanation:
Sulphur is found in many forms in the nature. S2, S6 and Ss being some of them. What can we say
will certainly be common among these forms of sulphur?
(A) They will exhibit same physical properties
(B) They will exhibit same chemical properties
(C) Sulphur atoms in each will be identical
(D) All of the above
Answer:
What can be said about these common forms of sulphur is that;
(B) They will exhibit same chemical properties
Explanation:
Allotropy is the property of an element to exist in two or more forms in the same physical state
Allotropes have several similar chemical properties but differ in their physical properties, such as the white, pale yellow to totally colorless diamond and the gray graphite
Sulphur can exist in several allotropic forms, and carbon is the only element that has more allotropes than sulphur
The sulphur allotropes includes S₂, S₆, and S₅ have similar chemical properties but different physical properties.
The correct option is;
What can be said about these common forms of sulphur is that they have the same chemical properties
why can mosquitos stand on water?
A-The mosquito is able to walk on the water due to the attraction between multiple water molecules, creating surface tension.
B-The mosquito is able to walk on the water due to the attraction between water molecules and other non-water molecules, creating surface tension.
Answer:
Mosquitos can stand on water because;
A. The mosquito is able to walk on the water due to the attraction between multiple water molecules, creating surface tension
Explanation:
Surface Tension is the surface property of a liquid which is due to the cohesive forces of attraction between its molecules, that enables it to withstand an external shearing force
The molecules in a liquid maintain a cohesive force between adjacent molecules that keeps all the molecules together such that the liquid has a defined volume
On the surface of the liquid, the cohesive forces between the molecules are shared by only between the adjacent molecules and molecules which are under the surface, and therefore, the attraction is much stronger such that the surface of the liquid is in tension, which is called the surface tension of the liquid
Therefore, the mosquito is able to walk on the water due to the attraction between multiple water molecules, creating surface tension.
In an electrically neutral atom of any element, there are equal numbers of
A. Protons and neurons.
B. electrons and procons.
C. electrons and neurrons.
D. atomic number and atomia mess. 5
Answer:
B. electrons and protons.
Explanation:
In an electrically neutral atom of any element, there are equal number of protons and electrons in the atom.
Protons are the positively charged particles in an atom.
Electrons are the negatively charged particles within the atom.
When the number of protons and electrons are the same or equal, the atom is neutral.
But when there is an imbalance, an ion results.
4. Calculate the molar mass of Fe2(SO4)3. Then calculate the mass of iron(III) sulfate of 4.05X1023 formula units. Answer: __269g Fe2(SO4)3_
Answer:
399.88 [tex]\frac{4.05*10^{23} }{6.022*10^{23} }[/tex] =269
Explanation:
399.88 is the molar mass of iron(III) sulfate.
The mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.
Mass from formula unitsTo calculate the molar mass of Fe2(SO4)3, we need to determine the atomic masses of the individual elements involved and multiply them by their respective subscripts:
Fe: 55.845 g/mol (atomic mass of iron)S: 32.06 g/mol (atomic mass of sulfur)O: 16.00 g/mol (atomic mass of oxygen)Fe2(SO4)3 consists of 2 iron atoms, 3 sulfur atoms, and 12 oxygen atoms:
Molar mass of Fe2(SO4)3 = (2 * 55.845) + (3 * 32.06) + (12 * 16.00) = 159.69 g/mol
To calculate the mass of 4.05 × 10^23 formula units of Fe2(SO4)3, we can use the molar mass:
Mass = (4.05 × 10^23) * (159.69 g/mol) = 6.48 × 10^25 g
Rounded to two decimal places, the mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.
More on formula units can be found here: https://brainly.com/question/33740227
#SPJ6
help me please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A sample of methane gas collcted t a pressure of 0.0884 atm and a temperature of 6.00 C is found to occupy a volume of 26.5 L. How many moles of CH4 gas are in the sample? ____ mol
Answer:
0.1mole
Explanation:
Given parameters:
Pressure = 0.0884atm
Temperature = 6°C = 6 + 273 = 279K
Volume occupied = 26.5L
Unknown:
Number of moles = ?
Solution:
To solve this problem, we are going to use the ideal gas equation:
PV = nRT
P is the pressure
V is the volume
n is the number of moles
R is the gas constant = 0.082atmLmol⁻¹k⁻¹
T is the temperature.
Insert the parameters and solve for n;
0.084 x 26.5 = n x 0.082 x 279
n = 0.1mole