PLZ FAST Scientific knowledge is both long lasting and always _______.

changing
non-observable
permanent
untestable

Answers

Answer 1
The answer is changing

Related Questions

partes son de un estadio de futbol

Answers

Las dos líneas más largas del terreno de juego se denominarán líneas de banda. Las dos más cortas se llamarán líneas de meta. El terreno de juego será rectangular y la longitud de las líneas de banda deberá ser mayor que las de las líneas de meta. La longitud de la línea de banda debe tener como mínimo 90 metros y como máximo 120 metros. La anchura de la línea de meta debe de tener como mínimo 45 metros y como máximo de 90 metros. Todas las líneas del terreno de juego deberán se líneas continuas y tener la misma anchura, como máximo 12 cm., menos las líneas de meta que deben tener la misma anchura que los postes y larguero de la portería. Todas las líneas que delimitan al campo forma parte del terreno de juego. El terreno de juego puede ser de tierra, césped natural ó césped artificial de color verde según las normas del reglamento de la competición. El terreno de juego está dividido en dos partes iguales por una línea que unirá los puntos medios de las dos líneas de banda. El centro del campo estará marcado con un punto situado en la mitad de la línea media que divide las dos partes iguales del campo, tomando este punto como centro, haremos circulo de un radio de 9,15 metros. También se puede poner un banderín en cada extremo de la línea de media, a una distancia mínima de 1 m al exterior de la línea de banda.

please help me fast ​

Answers

Answer:

pressure is force per unit length

Answer:

SI unit of displacement is meter

A student wants to draw a model of an atom. Which statement describes how to find the number of neutrons to include in the model?

A. Add the atomic number and the mass number.

B. Subtract the atomic number from the mass number.

C. Subtract the number of electrons from the number of protons.

D. Ads the number of electrons to the number of protons.​


Anything helps.

Answers

pretty sure it would be B

A student walks to the right, 25-m along the C Hall in 15-s. They turn around and walk 15-m to the left in 8.0-s. What is the average speed and the average velocity? (V represents average speed and ΔV represents average velocity)


Answers

For the student that walks to the right 25 m in 15 s and then turns and walks to the left 15 m in 8.0 s, we have:

1. The average speed is 1.74 m.

2. The average velocity is 1.42 m.

1. The average speed is an scalar wich is given by:

[tex] V = \frac{d_{t}}{t_{t}} [/tex]

Where:

[tex]d_{t}[/tex]: is the total distance

[tex]t_{t}[/tex]: is the total time

The total distance and the total time can be calculated as follows:

[tex]d_{t} = d_{1} + d_{2} = 25 m + 15 m = 40 m [/tex]

[tex] t_{t} = t_{1} + t_{2} = 15 s + 8.0 s = 23 s [/tex]

Since V is a scalar, the direction of motion is not important to calculate the final value.

Then, the average speed is:

[tex] V = \frac{d_{t}}{t_{t}} =\frac{40 m}{23 s} = 1.74 m/s [/tex]

2. The average velocity is a vector, so the direction of motion is important here. This ΔV can be calculated with the following equation:

[tex] \Delta V = \frac{\Delta x}{\Delta t} = \frac{x_{f} - x_{i}}{t_{f} - t_{i}} [/tex]

Where:

x: is the displacement  

f: is for final and i: is for initial

Hence, the average velocity is:

[tex] \Delta V = \frac{x_{f} - x_{i}}{t_{f} - t_{i}} = \frac{15 m - 25 m}{8.0 s - 15 s} = 1.42 m/s [/tex]

You can find more about average speed and average velocity here: https://brainly.com/question/12322912?referrer=searchResults

I hope it helps you!

A student conducts an experiment to test how the temperature affects the amount of sugar that can dissolve in water. In the experiment, she uses 100 milliliters of water in each trial and stirs for five minutes each time.

What is the independent variable in this experiment?

A. the amount of water

B. the temperature of the water

C. the amount of sugar

Answers

B. The temperature of the water.

The independent variable is the variable that is changed to affect the dependent variable. In this instance, the temperature of the water is being changed to affect the amount of sugar that dissolves.

Which is an example of an exothermic process?
A.
splitting of water molecule
B.
formation of glucose from carbon dioxide
C.
condensation of steam
D.
cooking of an egg
E.
evaporation of water

Answers

Answer:

i think answer is c

Explanation:

as formation water from steam condensed release heat

else all need heat

what objects has large volume and small mass

Answers

Answer:

A hot air balloon

It is normal to feel a sharp pain or pop when lifting heavy weights. Question 5 options: True False

Answers

Answer:false

Explanation:because it means you're pushing yourself too much and you need to use smaller weights

Kepler's Laws of Motion explain why ________.

Answers

Answer:

Kepler's three laws of planetary motion can be stated as follows: (1) All planets move about the Sun in elliptical orbits, having the Sun as one of the foci. ... (3) The squares of the sidereal periods (of revolution) of the planets are directly proportional to the cubes of their mean distances from the Sun.

If ball A rolls off a 50 cm high table at the same instant that ball B rolls off a 75 cm high table, which will hit the ground first?

Answers

ball a

Explanation,

Hope it helps

a crane gradually lifts a car with a mass of 1000kg at constant speed to height of 5cm. Calculate the potential energy of the car at that height.​

Answers

Answer:

490.5

Explanation:

Formula

U = mgh

= 1000 x 9.81 x 0.05m

= 490.5

please someone derive 3rd equation of motion u- v= 2sa​

Answers

We know

[tex]\\ \sf\longmapsto a=\dfrac{dv}{dt}[/tex]

[tex]\\ \sf\longmapsto a=\dfrac{dv}{dx}.\dfrac{dx}{dt}[/tex]

[tex]\\ \sf\longmapsto a=v\dfrac{dv}{dx}[/tex]

[tex]\\ \sf\longmapsto adx=vdv[/tex]

Integrate

[tex]\\ \sf\longmapsto a{\displaystyle{\int}^x_{x_0}}dx=\displaystyle{\int}_u^v vdv[/tex]

[tex]\\ \sf\longmapsto a(x-x_0)=\dfrac{v^2-u^2}{2}[/tex]

Here

x-x_0=s

[tex]\\ \sf\longmapsto v^2-u^2=2as[/tex]

8. A girl is padaling her blcycle at a velocily of 0.10 km/min. How far will she travel in two hours?

Answers

Explanation:

2 h = 120 min

v = 0.1 km/m

distance = v × t

= .1 × 120

= 12 km

explain the various aspects of few medical based profession​

Answers

Answer:

doctor,health assistant , dentist, psychotherapist , nurse ,etc

A wheelbarrow of mass 20 kg accelerates from rest and reaches speed of 10m/S2 in 5 seconds.its force?​

Answers

Answer:

[tex]\boxed {\boxed {\sf 40 \ Newtons}}[/tex]

Explanation:

We are asked to find the force of a wheelbarrow. According to Newton's Second Law of Motion, force is the product of mass and acceleration.

[tex]F= \ m \times a[/tex]

1. Calculate Acceleration

The mass of the wheelbarrow is 20 kilograms. We are not given the acceleration, so we must calculate it using the following formula.

[tex]a= \frac{v_f-v_i}{t}[/tex]

The wheelbarrow starts at rest or 0 meters per second (initial velocity) and accelerates to reach 10 meters per second (final velocity) in 5 seconds (time).

[tex]v_f=[/tex]10 m/s [tex]v_i=[/tex]0 m/s t= 5 s

Substitute these values into the formula.

[tex]a= \frac{ 10 \ m/s-0 \ m/s}{5 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{10 \ m/s}{5 \ s}[/tex]

Divide.

[tex]a= 2 \ m/s/s[/tex]

[tex]a= 2 \ m/s^2[/tex]

2. Calculate Force

Now we know the mass and acceleration of the wheelbarrow

m= 20 kg a= 2 m/s²

Substitute the values into the force formula.

[tex]F= 20 \ kg \times 2 \ m/s^2[/tex]

[tex]F= 40 \ kg*m/s^2[/tex]

Convert the units. 1 kilogram meter per square second is equal to 1 Newton, so our answer of 40 kilogram meters per square second is equal to 40 Newtons.

[tex]F= 40 \ N[/tex]

Answer:

40 N

Explanation:

We know that

F = ma

and

a = (v - u)/t

So,

F = m(v - u)/t

F = 20(10 - 0)/5

F = 20(10/5)

F = 20(2)

F = 40 N

show that vector a + vector b = vector b + vector a.

Answers

Recall that vector addition can be visually represented by the head-to-tail method. This means that the head of one vector is glued to the tail of the other vector, to point us directly to the target vector we're after. Think of it like following instructions on a map.

A visual example is shown below. There are two pathways to arrive at the c = a+b vector. The patheway on the right is a+b while the path on the left is b+a. The order doesn't matter since we arrive at the same destination.

-------------------------------------

Here's an algebraic approach without the need of a drawing.

Consider that vectors a and b are defined like so

a = <p,q>

b = <r,s>

where p,q,r,s are real numbers. They define the coordinates of the two vectors.

Adding vectors a and b gets us

a+b = <p,q>+<r,s> = <p+r,q+s>

We add the corresponding coordinates. Since p+r is the same as r+p, we can say,

b+a = <r,s>+<p,q> = <r+p,s+q> = <p+r,s+q> = a+b

Therefore, a+b = b+a. Again, this all relies on the fact that addition of scalar numbers can be done in any order. So by extension, vector addition can be done in any order. This applies to multiple vectors and not just two of them.

A stream of electrically charged particles flowing from the sun is called the
a. Van Allen belt.
b. magnetosphere.
c. solar wind.
d. magnetic field.

Answers

Answer:

solar wind

Explanation:

the sun's atmosphere is made of hydrogen which itself made subatomic particle. These particle are constantly boiling off the sun and streaming outward at very speed. So, the sun's magnetic field and particles are called solar wind.

Answer:

c

Explanation:

Solar wind

What does the term "heat capacity" refer to? Question 2 options: The amount of heat energy needed to raise the temperature of a unit mass of a material one degree A ratio of the amount of heat a material will absorb to the amount of heat it immediately releases The amount of heat that must be applied to a solid to convert it to a liquid The amount of heat that a liquid can absorb until the particles speed up enough to become a gas

Answers

Answer:

Heat capacity is the ratio of the amount of heat energy transferred to an object to the resulting increase in its temperature. Molar heat capacity is a measure of the amount of heat necessary to raise the temperature of one mole of a pure substance by one degree K.

Explanation:

hope this helps <3

What is an alpha particle?


a complete helium atom
a complete helium atom, ,

the nucleus of a beta particle
the nucleus of a beta particle

a rogue valence electron
, , a rogue valence electron

two protons and two neutrons

Answers

Answer:

two protons and two neutrons

it's the answer. hope it helps

Alpha particles have two protons and two neutrons. Therefore, option (D) is correct.

What is an alpha particle?

Alpha particles can be defined as positively charged particles released from the decay of several radioactive materials. The mass of the Alpha particle is because of the presence of two protons and two neutrons. Therefore, the Alpha particles nucleus is very similar to the nucleus of the Helium atom and are denoted by the Greek alphabet α.

An alpha particle or ray is also known as doubly ionized helium nuclei (He²⁺). The alpha particle's mass is equal to 6.64 × 10⁻²⁷ Kg. Alpha particles are generally generated during the standard radioactive decay of atomic nuclei.

Alpha particles contains the kinetic energy of 5MeV and a speed of 5 % of that of the speed of light. They are also formed in high-energy particle accelerators and are highly ionized particles with low penetration depth compared to other particles.

Learn more about alpha particles, here:

brainly.com/question/2288334

#SPJ5

please help please please please

Answers

The answer is plants

Would talking to plants positively or negative affect how they grow?

Answers

Answer:

u go to vanguard? in 6th grade

Answer:

is it correct ? sorry of it is incorrec

Explain an experiment you could run to test the Big Bang theory, including the design and execution, and any observations you can make of the world around you related to the scientific theory. And explain how the observations support of refute the theory!!! Will mark branliest

Answers

The  big bang theory or great expansion explains the formation of the universe from a point with very high density where matter and space were created, it can be observed in an experiment

The Big Bang theory that can be adapted with some home experiments, specifically the expansion can be measured using an experiment with inflating balloons.

Materials

deflated balloons

marker

thread

measuring tape

Description of the experiment

The stars or galaxies are marked repeatedly with an initial separation and this distance is measured by a thread the length and the thread with a meter, this is used as measured by the fact that the surface is curved.

The balloon is inflated and measurements of the separation are made, observing that as the volume of the balloon increases (time increase) the separation of the galaxies increases

The increase in distance is explained by the Big Bang theory or great expansion.

There is also astronomical evidence:

* The redshift of the hydrogen spectral lines that is explained by the Dopler effect, which is a move away from objects

* Background radiation in the microwave range that comes from everywhere and would be the residue of a large initial explosion.

Read more about at:

https://brainly.com/question/18297161

Suzy drives 10 miles north then drives 24 miles west. What is her total distance traveled?

Answers

Answer:

34

Explanation:

what is the unit of work ?​

Answers

Answer:

a joule is the unit of work

Explanation:

A cheetah has an average velocity of 70 mph. If a cheetah was chasing a water Buffalo for 23 miles, how long was the cheetah chasing its prey

Answers

Answer:

t=distance ÷ speed

23÷70

t=0.33 sec

1. °C= (°F-32) X 5/9. what will be the answer?
2. °F= 9/5 (°C)+32
3. °K= °C+273
4. D= m/V

Answers

Answer:

F=9/5(°C)+32

Explanation:

Let's take an example

Take 100°C.

[tex]\\ \sf\longmapsto \dfrac{9}{5}(100)+32[/tex]

[tex]\\ \sf\longmapsto 9(20)+32[/tex]

[tex]\\ \sf\longmapsto 180+32[/tex]

[tex]\\ \sf\longmapsto 212°F[/tex]

2. CHARLES MANSON WAS DIAGNOSED WITH
PERSONALITY DISORDER.
10 points
(A)NARCISSISTIC
(B) BIPOLAR
(C)ANTI-SOCIAL
(D)BORDERLINE
O Other

Answers

Answer:

The answer is C. anti social

Explanation:

Hope that helps!

<3
A person weighing 600 N gets on an elevator, The elevator lifts the person 6 min
10 seconds, How much power was used?
600 W
360 W
3600 W
60 w

Answers

Answer:

Itś 360 W

Explanation:

took the test

please someone help me with the questions. I asked earlier Thank you.​

Answers

Answer:

Mark me as brainliest as i need it ..

I will answer your questions

a) If the mass of the car is doubled (by adding passengers and cargo) by what factor must the
force change so the car can make the turn? (2 pts)

Answers

Let Mass be m

F=ma

If its doubled then

[tex]\\ \sf\longmapsto F=2ma[/tex]

Hence force also needs to be doubled.

Other Questions
Is 15/0 just 15? Thank you! Simplify 2.5 (16/2-2.3) - 2 Write down three powers of federal, provincial and local units of governance having according to our constitutional provision PLEASE HELP MEEEEEE 2. If you were writing about the Civil War, which would be the secondary source?A. a Civil War soldier's memoirB. a chapter in a history book about the Civil WarC. an old photograph of a Union soldier An equation is shown below: 5(2x - 8) + 15 = -15 Write the steps you will use to solve the equation and explain each step. 1. Is each of the following statements true or false? Correct any that are false.a. A mole of one substance has the same number of atoms as a mole of any other substance b. The theoretical yield for a reaction is based on the balanced chemical equation c. A limiting reactant problem is being stated when the available quantity of one of the reactants is given in moles d. The empirical and molecular formulas of a compound are always different. Translate this sentence into an equation.42 is the product of Mai's height and 3.Use the variable m to represent Mai's height. physical strength to lift heavy equipment and machinery what carrer is this1 radio 2 god3car spiliest 4 radoioligest She is very skilled __________ I am not surprised that she was offered the job.. Therefore; therefore, therefore,. Therefore, Write a verbal expression for each algebraic expression.(c - 2)d(2 + 5)p _________ is included in the study of Human geography.A.landforms B.the planets in the solar system C.ecosystems D.culture pls answer correctly!n - 6m = 8solve for n 1. If you were writing a movie review, which would be the primary media source?A. the movie you are reviewingB. reviews of the movie written by film criticsc. a synopsis of the movie written by its director critics How many feet? Thank you for your time. If x + 4:8 = 30:4 find the value of x How many district are there in ? 1.Family As income is more than twice that of Family B, yet Family B has more equity, or positive value, on the things that they own. How do you account for the difference? Sources of revenue for each level of government are clearly specified to ensure ________ Hi! help here thanks What was an advantage of investing in a venture through a joint-stock company?