Programming Exercise 11 in Chapter 8 explains how to add large integers using arrays. However, in that exercise, the program could add only integers of, at most, 20 digits. This chapter explains how to work with dynamic integers. Design a class named largeIntegers such that an object of this class can store an integer of any number of digits. Add operations to add, subtract, multiply, and compare integers stored in two objects. Also add constructors to properly initialize objects and functions to set, retrieve, and print the values of objects. Write a program to test your class.
Answers
Answer:
Explanation:
The following is written in Java. It creates a class called largeIntegers that creates objects of the built-in BigInteger class to handle operations on very large numbers. The class contains the add, subtract, multiply, compare, toString methods as well as the getter and setter method for the BigInteger. A test class has been provided and the output can be seen in the attached picture below where two numbers are created and added together. Due to technical difficulties, I have added the code as a txt file below.
Related Questions
Choose the word that matches each definition. 1. IP Address 2. Server 3. Port Each term is only used once._____________ a number used within a computer to identify a specific process ____________ a numerical reference to a particular device in a network ___________ a computer that handles requests and returns data to other computers in a network
Answers
Port a number used within a computer to identify a specific process.
IP Address a numerical reference to a particular device in a network.
Server a computer that handles requests and returns data to other computers in a network.
Explanation:A port number is a number used to uniquely identify a particular process, application or program on a computer. From the networking parlance, it is a logical address that uniquely identifies a process, protocol or application communicating with other process, protocol or application over a network. For example;
i. a file transfer protocol (FTP) could use a port number of 20 or 21.
ii. a simple mail transfer protocol (SMTP) could use a port number of 25
Internet Protocol (IP) address is a numerical reference or label assigned to a particular device in a network which helps to uniquely identify the device on the network. IP addresses (version 4) are expressed as a group of four numbers separated by a dot. For example, an IP address may look like this: 192.168.0.90
A server is a computer that receives requests from other computers, processes these requests and returns some data to the other computers in a network. In reality, these servers and the computers they serve can actually be some applications or programs. Servers provide resources, data, services or programs to other computers over a network.
Answer:
IP address: an Internet Protocol (IP) address is a numerical reference to a particular device in a network
port: a number used within a computer to identify a specific process
server: a computer that handles requests and returns data to other computers in a network
Explanation:
edge 2022
help please I would really appreciate
Answers
Answer:
the answer is address bar
Answer:
This is called an address bar
Explanation:
It tells your computer where to send the data and what website you are trying to communicate with.
:)
Identify the error and write correct HTML program 5 Cyber Bullying Tips<\head>Don't Respond Talk to a trusted adult <|html>
Answers
Answer:
<html>
<head> Cyber Bullying Tips </head>
<body>
Don't Respond, Talk to a trusted adult
</body>
</html>
define client and.server
Answers
Answer:
Client-server model is a model is a distributed application structure that partitions
tasks or workloads between the providers of a resource or service, called servers, and service requesters, called clients.
Recently mobile phones have been used to pay for goods in stores and supermarkets. One method
of payment involves holding the phone close to a reader in the store.
Discuss the advantages and disadvantages of this method of payment compared with other methods
of credit/debit card transactions.
Answers
Answer on https://pastebin.com/raw/nHzXvbPP
Why does brainly always say, "We're sorry, but we are not able to complete your registration at this time"?! Now I cant view any answers to any questions!
Answers
Answer and Explanation:
It's very likely a network issue. You could do a hard refresh on your browser or brainly app. Simply clear your application's cache or your browser data or cache and then try again. You could also try re-installing your app. If this doesn't work, please reach out to the Brainly customer support team for help.
what type of computer system can be found in the computer lab at school?
A. mini
B. micro
C. Mainframe
D. super
Answers
Answer:
B: micro
Explanations
a small computer that contains a microprocessor as its central processor.
In terms of technology, wich of the four devices is the most recent?
a. keyboard
b. joystick
c. scanner
d. camera
Answers
They consider the typewriter a keyboard…late 1800’s
Scanner (1957)
Camera (late 1800)
Why is computer called information processing maching???
Answers
☆ Since, the computer accepts raw data as input and converts into information by means of data processing, it is called information processing machine (IPM).
HOPE IT HELPS ❣️
Answer:
Since, the computer accepts raw data as input and converts into information by means of data processing, it is called information processing machine or IPM.
Explanation:
Hadoop is : open source software framework designed for distributing data-processing over inexpensive computers. data mining platform designed for storing and analyzing big data produced by web communications and transactions. high-speed platform used to analyze large data sets pre-configured hardware-software system designed for analyzing big data. NoSQL database technology that stores both data and procedures acting on the data as object
Answers
Answer: open-source software framework designed for distributing data-processing over inexpensive computers.
Explanation:
Hadoop refers to the collection of open-source software utilities which are important in facilitating the use of a network of several computers to solve big data.
It provides huge storage for different kinds of data, and the ability to handle concurrent tasks virtually. Therefore, the correct option is "open-source software framework designed for distributing data-processing over inexpensive computers".
Realiza una tabla acerca de los escenarios de usos más comunes de Excel.
Answers
Answer:
Microsoft Excel es una hoja de cálculo producida por Microsoft. La aplicación es ampliamente utilizada en empresas e instituciones, así como por usuarios domésticos. Su uso principal es realizar cálculos (por ejemplo, gastos) compilados en forma tabular. Para este uso, se aplican numerosas funciones matemáticas, financieras y de base de datos disponibles en el programa. La duplicación semiautomática de las fórmulas creadas con el uso de diferentes variantes de direccionamiento (direccionamiento relativo, direccionamiento absoluto, direccionamiento mixto) también es de gran importancia. Microsoft Excel también se utiliza para crear muchos tipos de gráficos, útiles, entre otros, en física, matemáticas y economía. También incluye un sistema para la elaboración de informes utilizando el llamado tablas dinámicas, utilizadas en la realización de análisis comerciales.
Edhesive lesson practice 8.3, question 5
Answers
Answer:
3
Explanation:
Following are the correct python code to find the length of the given parameter value.
Python code to find length:print(len("stuff"))#printing length
Output:
please find the attached file.
Program Explanation:
In the given python code a print method is used inside this a "len" method is used that accepts a string value in the parameter.Python has a built-in function called len(). It determines an object's length. A character length of a text string is returned by LEN.
Find out more about the length method here:
brainly.com/question/13527881
Which headphones are a better option, the HyperX Cloud Stinger or the Logitech G432
Answers
Answer:
The Logitech ones.
Explanation:
Surprisingly I've used all 3 of them and the Logitech ones are the one with not only the best sound quality. And the mic isn't horrible either.
Select the three reasons that the gaming industry is set to grow.
A) more colleges offering jobs in game design
B) a decrease in the average age of gamers
C) an expanding market on mobile phones
D) expanding markets in Asia
E) new accessories that will attract more players
Answers
Answer:
expanding markets in Asia, new accessories that will attract more players, an expanding market on mobile phones
Explanation:
A programmer for a weather website needs to display the proportion of days with freezing temperatures in a given month.
Their algorithm will operate on a list of temperatures for each day in the month. It must keep track of how many temperatures are below or equal to 32. Once it's done processing the list, it must display the ratio of freezing days over total days.
Which of these correctly expresses that algorithm in pseudocode?
A.
numFreezing ← 0
numDays ← 0
FOR EACH temp IN temps {
IF (temp ≤ 32) {
numFreezing ← numFreezing + 1
}
numDays ← numDays + 1
DISPLAY(numFreezing/numDays)
}
B.
numFreezing ← 0
numDays ← 0
FOR EACH temp IN temps {
IF (temp ≤ 32) {
numFreezing ← numFreezing + 1
}
numDays ← numDays + 1
}
DISPLAY(numFreezing/numDays)
C.
numFreezing ← 0
numDays ← 0
FOR EACH temp IN temps {
IF (temp < 32) {
numFreezing ← numFreezing + 1
}
numDays ← numDays + 1
}
DISPLAY(numFreezing/numDays)
D.
numFreezing ← 0
numDays ← 0
FOR EACH temp IN temps {
IF (temp ≤ 32) {
numFreezing ← numFreezing + 1
numDays ← numDays + 1
}
}
DISPLAY(numFreezing/numDays)
Answers
Answer:
B.
Explanation:
The correct Pseudocode for this scenario would be B. This code makes two variables for the number of total days (numDays) and number of freezing days (numFreezing). Then it loops through the entire data set and checks if each temp is less than or equal to 32 degrees. If it is, it adds it to numFreezing, if it is not then it skips this step, but still adds 1 to the total number of days after each loop. Once the entire loop is done it prints out the ratio, unlike answer A which prints out the ratio for every iteration of the loop.
numFreezing ← 0
numDays ← 0
FOR EACH temp IN temps {
IF (temp ≤ 32) {
numFreezing ← numFreezing + 1
}
numDays ← numDays + 1
}
DISPLAY(numFreezing/numDays)
Nina visited an area that receives a large amount of precipitation during all twelve months and is typically warm year round. The area also has a large variety of organism diversity. What biome did Nina most likely visit?
Answers
Answer: Rainforest
Explanation:
A rainforest is an area that typically has tall, green trees and also has a high amount of rainfall. Rainforest can be found in the wet tropical uplands and lowlands. The largest rainforests can be seen in the Amazon River Basin.
Since the area visited by Nina has a large amount of precipitation during all twelve months, typically warm year round and has a large variety of organism diversity, then the biome thatcNina most likely visited is the rainforest.
3 Negative ways of using the Internet
Answers
Answer:
1. It rots the mind of children
2. It's to too addicting
3. can show bad things.
Explanation:
2. Gambling (playing games where you win money)
3. Identity theft, hacking.
When visiting or learning about other places, what new things have you experienced? Choose all that apply.
food and drink
music and art
languages
values and ideas
technology
Answers
Answer:
All of these answers
Explanation:
list any three positive impacts of computer technology in our society?
Answers
Answer:
nWhich statement about the origins of the American population is true?
A most Americans descend from people who first populated this continent about 20,000 years ago
b about 98 percent of Americans live in this country due to the waves of Irish and German people who came in mid 1800s
c immigration expander the American population before 1806 ,bur has no significantly contributed to it since then
d the vast majority. of Americans ms either descended from immigrats or are immigrants themselves
Explanation:
sjsikskakakakakkakznxjduwjawjieieiwiwiwiwiwiw idek computer mouse laptopdhsjsjsjsjjsjs
Recently mobile phones have been used to pay for goods in stores and supermarkets.
One methodof payment involves holding the phone close to a reader in the store.Discuss the advantages and disadvantages of this method of payment compared with other methods of credit/debit card transactions.
Answers
Answer:
The advantages of using mobile phones to pay for goods in stores are;
1) The ability to pay for goods and/or services without having to carry a physical wallet, thereby making payments faster, more convenient, and safer as the contents of a money wallet or purse cannot be seen
2) The generation of security codes for each transactions, the use of PIN input and finger sprint scanning for payment, ensures access to payment authorization is limited and requires definitive authentication and that payment transactions will not need to be scrutinized by merchants to detect fraudulent transactions
3) Paying with the mobile phone increases privacy as the card used for payment will be known only to the person doing the payment, thereby a person can use a credit card with low limit without displaying them
The disadvantages of using mobile phones to pay for goods in stores includes;
1) The possibility of breach in security of the mobile phone during payment. Sensitive information of the mobile phone can be collected during payment and then used in other places without the permission of the owner of the phone
2) Mobile phone payment may not be suitable to people who prefer card or cash payment
3) The different mobile phone payment applications and platforms are not entirely compatible and can lead to payment challenges
Explanation:
describe the uses of computer in different fileds? please help me
Answers
Answer:
Computers are used to perform several industrial tasks. They are used to design products, control manufacturing processes, control inventory, manage projects, and so on. Computers are used to control and manage different manufacturing systems and continuous running of the industry.
1 punto
María tiene una empresa de mercancia
seca, dicha empresa brinda su servicio de
ventas de estas mercancías al por mayor y
menor para su clientela. ¿De qué tipo de
Comercio hablamos en este ejemplo?: *
Answers
Answer:
Retailing.
Explanation:
La venta al por menor o retailing es el suministro de bienes físicos a los consumidores para uso personal, sea en pequeña o grandes cantidades, siempre que esté destinado a consumidores finales. Es un sector que consta de diferentes ramas (como la industria alimentaria, la industria de la moda, la industria del mobiliario para el hogar, etc.). El comercio minorista es el último eslabón de la cadena de suministro que va desde el fabricante hasta el consumidor.
A folder has been shared with other users and set to read-only. What does this mean for users?
Users can only read the name of the shared folder.
Users cannot add new folders or files.
Users can read and edit files.
Users can add new files but not new folders.
Answers
Answer:
It means that users can only read or, depending on that platform, read and edit files in the folder
Full from of Computer
: )
Answers
Answer:
COMPUTER full form or meaning is Common Operating Machine Purposely used for Technological and Educational research.
Explanation:
In you question, it isn't from! it is form(;
Some people think that Computer's full form is Common Operating Machine Purposely Used for Technological and Educational Research.
But actually computer is not a full form type word. It is made from the word "compute" which means "calculate". Computer means something that computes or calculates, because initial computers were used for calculating only.
An input value has to be greater than 18 and less than 65 if a driving license is to be approved for issue. What type of input checking is appropriate?
Answers
Answer:
You should use an "if" statement to check whether the number is greater than 18 or less than 65.
Explanation:
You usually use "if" statements whenever you want to compare a number to another. Keep in mind that "if" statements are not only used for comparison!
Select three advantages of cloud computing.
A) large amount of storage capacity
B) no Internet access required
C) great flexibility
D) enhanced security
E) easily managed
Answers
Answer:
easily managed, large amount of storage capacity, great flexibility
Explanation:
Can someone please type a code that makes a house in python and turtle graphics i need help
Answers
Answer:
import turtle
turtle.speed(2)
#shape
turtle.forward(100)
turtle.left(90)
turtle.forward(100)
turtle.left(45)
turtle.forward(100)
turtle.left(90)
turtle.forward(100)
turtle.left(45)
turtle.forward(100)
turtle.left(90)
turtle.forward(100)
#door
turtle.left(90)
turtle.forward(50)
turtle.left(90)
turtle.forward(25)
turtle.left(90)
turtle.forward(50)
#windows
turtle.penup()
turtle.right(90)
turtle.forward(20)
turtle.right(90)
turtle.forward(20)
turtle.pendown()
turtle.forward(25)
turtle.left(90)
turtle.forward(40)
turtle.left(90)
turtle.forward(25)
turtle.left(90)
turtle.forward(40)
Explanation:
:)
Describa las etapas del arranque de viruta
Answers
Answer:
Las virutas son partículas que se eliminan mecánicamente de una pieza de trabajo mecanizada. En el contexto de la tecnología de fabricación, especialmente el mecanizado, el término se refiere principalmente a virutas de metal; En principio, sin embargo, las virutas se crean en todo tipo de mecanizado de cuerpos sólidos. Las astillas de madera son el resultado de la carpintería. Cuando se mecanizan plásticos, se crean virutas, así como cuando se mecanizan materiales minerales, cristalinos o amorfos como el vidrio, que a menudo se realiza mediante esmerilado.
Which option is not available in the Presenter view of a presentation?
Answers
Group of answer choices.
A. Next Slide Preview
B. Pen/Laser Pointer tools
C. Open Slide Show
D. Navigation Controls
Answer:
C. Open Slide Show
Explanation:
PowerPoint application can be defined as a software application or program designed and developed by Microsoft, to avail users the ability to create various slides containing textual and multimedia informations that can be used during a presentation.
Some of the features available on Microsoft PowerPoint are narrations, transition effects, custom slideshows, animation effects, formatting options etc.
Basically, the views that are available on the Microsoft PowerPoint application includes;
1. Slide Sorter.
2. Notes Page.
3. Reading Pane.
4. Presenter view.
Presenter view avails the user an ability to use two monitors to display his or her presentation. Thus, one of the monitors displays the notes-free presentation to your audience while the other monitor lets you view the presentation with notes that you have added to the slides, as well as the navigation and presentation tools.
Furthermore, the Presenter view was developed by Microsoft Inc. to have the following options;
I. Next Slide Preview.
II. Pen/Laser Pointer tools.
III. Navigation Controls.
However, Open Slide Show is an option which is not available in the Presenter view of a presentation.
You are going to create multiple functions that will take in the appropriate measurements as parameters and calculate the area of the specific shape.
The following shapes must be included:
Square, Triangle, Circle, and Trapezoid
Feel free to add on more shapes if you want!!
Answers
Answer:
circle
Explanation:
Answer:
circle
Explanation:
