Question 16 During a rocket launch, the action force is considered the force of explosion from the burning fuel and expanding gases. Which of the following would be considered the reaction force? ​

Answer:

The total distance covered is 3 km and the displacement is 2.24 km.

Explanation:

For the total distance covered by Anthony, we just add all of the distances.

1 km (going east) + 1 km (going east again) + 1 km (going south) = 3 km

Hence, the his total distance covered when he went to the pizza place is 3 km.

Solving for the displacement is a different matter. We cannot just add all of the distances. From analysis of the problem, Anthony traveled and formed a right triangle. He traveled 1 km east twice, making it 2 km east in total, then he traveled 1 km south.

When dealing with a right triangle with 2 sides given (for this problem the two sides are the 2 km east and the 1 km south), we use the Pythagorean Theorem.

Solution:

c² = a² + b²  (Pythagorean Theorem)

c will be the longest side of the right triangle

a and b will be the other sides of the right triangle

c = √ (a² + b²)

c = √ (2² km + 1² km)

c = √5 km

c = 2.2361 km ≈ 2.24 km

Therefore, the displacement of Anthony is 2.24 km.

Read more about right triangle here:

brainly.ph/question/2449553

Know more about Pythagorean Theorem here:

brainly.ph/question/77971

Answer: The sound will increase in pitch.

Explanation:

According to the Doppler Effect, sounds will increase in pitch as they are nearing the listener, and then decrease in pitch as the sound moves further away. This is because when sound waves travel a shorter distance, the waves are more compact (higher frequency), producing a higher pitch. The further a listener is from the sound, the lower the pitch because the sound waves are more spread apart (lower frequency).

The maximum power delivered by the power supply is 0.81W.

An RL Series Circuit is one that has an inductance L coil and a resistance R connected in series with each other. when the current element I flowing in the circuit is crossed by a supply voltage (V).

A series configuration of an inductor and a resistor is known as an LR circuit. A voltage source, such as a battery, and a switch are connected to this circuit. Here, the wire that makes up an inductor's coil has a DC resistance, or R.

Maximum power is delivered when current in circuit is maximum.

Maximum current is obtained after long time when inductor is shorted.

Maximum current is I = 9V/100

Maximum powder = VI = (9v)(9v)/100

Maximum power delivered= 0.81W.

To know more about lr circuit visit:

https://brainly.com/question/29438184

#SPJ4

A surface wave is a combination of a transverse wave and a longitudinal wave

A surface wave is a mechanical wave that propagates along the interface between differing media. A surface wave is made up of transverse and longitudinal wave

A transverse wave is a wave in which particles of the medium move up and down perpendicular to the direction of the wave. A longitudinal wave is a wave in which particles of the medium move parallel to the direction of the wave.

Surface waves usually have larger amplitudes and longer wavelengths than body waves, and they travel more slowly than body waves do.

learn more about surface wave from

https://brainly.com/question/16948312

#SPJ1

Loudness increases by 10 dB for every dB increase in sound intensity. A 40-decibel light rainstorm is 100 times louder than a whisper, whereas a 30-decibel "silent" room is 10 times louder than a 20-decibel whisper. Loud noises can be harmful.

A 10 dB rise results in a two-fold increase in volume. The loudness will therefore rise by nearly 8 times with a 30 dB increase (from 20 dB to 50 dB).

Decibels are measured on a logarithmic scale using a power of ten, which might be perplexing. For those of you without advanced math degrees, this simply implies that the sound intensity doubles for every 10 decibel rise.

learn more about Decibels refer

https://brainly.com/question/28375244

#SPJ4

Answer:

A wave is a disturbance that moves along a medium from one end to the other. If one watches an ocean wave moving along the medium (the ocean water), one can observe that the crest of the wave is moving from one location to another over a given interval of time. The crest is observed to cover distance. The speed of an object refers to how fast an object is moving and is usually expressed as the distance traveled per time of travel. In the case of a wave, the speed is the distance traveled by a given point on the wave (such as a crest) in a given interval of time. In equation form,If the crest of an ocean wave moves a distance of 20 meters in 10 seconds, then the speed of the ocean wave is 2.0 m/s. On the other hand, if the crest of an ocean wave moves a distance of 25 meters in 10 seconds (the same amount of time), then the speed of this ocean wave is 2.5 m/s. The faster wave travels a greater distance in the same amount of time.

Explanation:

Answer:170

Explanation: 0.50

can also be written as

1

2

.

0.50

seconds is half of a second.

if the wave travels

340

m

every second, it will travel half of that distance in

0.50

seconds.

340

⋅

1

2

=

340

2

=

170

in half of a second, the wave will have travelled

170

metres away from its source.

Answer:

105N

Explanation:

force = mass x acceleration

force without the 25N = 40 x 2

= 80N

On top of this, he has to counteract the 25N so the actual force is 80N + 25N which is 105N

The rotation curve for this galaxy look like for raddi larger than 5kpc is angular velocity.

Angular velocity is the speed at which the angle between 2 bodies changed whenever an object rotated or revolvers around an axis. This displacements is depicted in the images by the angle firmed by a line on one body andar a line on the other.

Angular velocity can be defined as the Speed at which an item rotates or revolvers around an axis. The Greeks letter Omega (occasionally ) stands for angular velocity. The SI unit for angular velocity is radians per second because it is the expressed as an angle per unit of times.

Orbital speed increase with radius beacuse it is directly proportional to radius  

Since V=wr

So on increasing with radius orbital speed also increases.

So here w is angular velocity.

To know more about angular velocity click-

https://brainly.com/question/20432894

#SPJ4

The speed of the wave is determined as 18 m/s.

option D is the correct answer.

The speed of the wave is the rate of change of wave's displacement with time.

The speed of the wave is calculated by applying the formula relating speed, wavelength and frequency of the wave as shown below.

v = fλ

where;

The frequency of the wave is calculated as follows;

f = 1 / T

where;

The period of a wave is the time taken for the wave to complete one cycle.

In the picture given, 3 cycles of the wave = 0.5 s

1 cycle of the wave = ?

= 0.5 s / 3

= 0.16667 s

f = 1 / T

f = 1 / 0.16667

f = 6 Hz

The speed of the wave is calculated as follows;

v = fλ

v = 6 Hz  x  3 m

v = 18 m/s

Learn more about speed of wave here: https://brainly.com/question/2142871

#SPJ1

Answer: 1.57

Explanation:

absolute refractive index = [tex]\frac{speed of light in air}{speed of light in a medium}[/tex]

[tex]= > \frac{3 * 10^{8} }{1.91* 10^{8} } \\= > 1.57[/tex]

0 miles

Explanation:

delta displacment=position end-position beginning

The displacement of Adaline if she walks 2.0 miles north to school from her house. After school, she walks 2.0 miles south from the school to her house is zero miles so, option A is correct.

The overall modification of an object's location and direction of motion is referred to as displacement. Since displacement considers both the amount of the changing location and the direction of the motion, it is known as a vector quantity. There may be zero, positive, or negative displacement.

Given:

Adaline walks 2.0 miles north to school from her house. After school, she walks 2.0 miles south from the school to her house,

Calculate the displacement as shown below,

Displacement = Distance from house to school + Distance from school to house,

Displacement = 2 + (-2)  (North direction is taken as positive and south direction is taken as negative)

Displacement = 0 miles

To know more about displacement:

https://brainly.com/question/11934397

#SPJ2

-1.17 is the average acceleration when a hockey puck is hit on a frozen lake and starts moving with a speed of 13.20 m/s. Perfectly,5.6 s later, its speed is 6.60 m/s.

Given:

Now, to find the average acceleration we use the following formula;

Acceleration, [tex]a_{avg}[/tex] =[tex]\frac{v^{final}-v^{initial} }{time}[/tex]

⇒[tex]a_{avg}[/tex]=6.60-13.20/5.6 = -1.17m/[tex]s^{2}[/tex]

Hence, -1.17 is the average acceleration when a hockey puck is hit on a frozen lake and starts moving with a speed of 13.20 m/s. Perfectly, 5.6 s later, its speed is 6.60 m/s.

To know more about acceleration visit

https://brainly.com/question/9095533

#SPJ4



The resultant of the force that acts in opposite directions is 7 N.

We know that the resultant force is the force that has the same effect in magnitude and direction as two or more forces that is acting together. We have to note that the force that is actinmg on an object is a vector quantity. The implication of this is that the magnitude and the direction of the forces that are acting on the body is very important.

By the use of the law of vectors we can be able to write in the case of the question that we have here, we can see that the forces are acting in the opposite directions. The implication of this is that we would have to subtract the forces so as obtain the resultant force.

We have to note that when we have opposite forces, one is said to be positive and the other negative and the resultant force can be found by subtraction. As such the resultant force can be obtained from;

Let the +B force be 12 N

Let the -B force be 5N

12 N - 5 N = 7 N

Learn more about resultant force:https://brainly.com/question/16380983

#SPJ1

Answer:

a=25/24 m/s^2

Explanation:

I’m going to assume you mean the final velocity is 25m/s.

v^2=u^2+2as

625=0+2a300

a=25/24 m/s^2 or 1.0416^_ (period 1) ^m

Answer:

The answer is D. moving at a constant rate.
Explanation:
I've had this question before.

In the position-time graph, the horizontal line segment indicates that the object is not moving and is at rest. Therefore, option (B) is correct.

The position vs time graph on which the instantaneous position of a particle is plotted on the y-axis and the time is plotted on the x-axis is called the Position-Time graph.

In the position vs time graph always take an independent variable on the x-axis and dependent variables must be plotted on the y-axis. Through mathematical function, the dependent variable will be dependent on the independent variable.

In the case of the Kinematic equation of uniform acceleration, the position can be defined as a dependent variable and time will be the fundamental independent variable.

The case of the horizontal line in the position vs. time graph indicates that the position of the object is not changing with time so it is at rest.

Learn more about position vs. time graph, here:

https://brainly.com/question/11290682

#SPJ2

The star Sirius is indeed brighter but our Sun appears to be brighter because it is closer to us.

The intrinsic luminosity of Sirius is exactly 25.4 times more than the sun but if we compare the distances of these stars, Sirius is 8.6 light years away from us and the Sun is just 8 light minutes away from us. This marks the obvious reason why our Sun appears more bright.

Even mathematically, it can be justified as the apparent brightness of any luminous object depends on the inverse square of the distance of that luminous object. Therefore the sun's light energy dominates our sky and we can't see any traces of Sirius from the earth.

Learn more about the star Sirius on

https://brainly.com/question/15851246?referrer=searchResults

#SPJ4

Two planets are identical, except planet x has an atmosphere of mostly nitrogen and planet y has an atmosphere of mostly carbon dioxide therefore what we can determine about the planets is that x is Earth while y is Venus.

This is referred to as the envelope of gases surrounding the earth or another planet and it makes life possible by providing different organisms with air to breathe

In the atmosphere of the planet Venus there is a high concentration of carbon dioxide as it is made up of  it is made of 96.5% of CO₂ and a 3% of nitrogen.

On the other hand in the atmosphere of the planet Earth, there is a high concentration of nitrogen which is about 78% and is therefore the reason why they were chosen as the correct choices.

Read more about Atmosphere here https://brainly.com/question/24925283

#SPJ1

Answer:

C.) The United States would become less dependent on energies that emit greenhouse gases.

Explanation:

If nuclear energy increased, it would occupy a larger piece of the pie chart.  The prompt states that the usage of non-fossil fuel-based forms of energy would remain constant.  This condition means that nuclear energy would decrease the percentage of fossil fuel-based energy used.  Energy production through the use of fossil fuels necessarily produces greenhouse gases such as CO2.  An increase in nuclear energy would mean a corresponding decrease in dependence on greenhouse gas-producing fossil fuels.

It is a well-known fact that often applying force does not cause a change in the condition of motion. For instance, even if you use all of your force, a hefty box could not budge at all. Again, attempting to push a wall has no noticeable effect.

Because you pushed against the wall, but the wall pushed back against you with an equal and opposite force, you slide in the opposite direction (away from the wall).

Therefore, There are just two forces at work: friction and gravitation. Yes, the frictional force's magnitude must match the weight. Given that it is parallel to the wall, the friction is in the vertical direction (which is vertical)

Learn more about force here:

https://brainly.com/question/14309730

#SPJ1

The nuclear force between two charged particles is attractive, but Coulomb repulsion prevents two charged particles from getting close enough to interact. (K= 170 keV.)

We consider the value of the initial kinetic energy K that each deuteron must possess in order for them to come to rest when their surfaces meet to be the height of the Coulomb barrier.

if r is a deuteron's radius, then by the law of conservation of energy, we get,

2K=1/4πϵo. e²/2r

putting values, we get

K= 1/4πϵo. e²/4r=9x10^9x1.6x10^-19/4x2.1x10^-15=2.75x10^-14 J = 170 keV.

J is the potential energy. Divide it by the electron charge, or 1.6 x 1019C, to convert it to eV. Consequently, the 360keV potential barrier height for a head-on collision of two deuterons. In this work,

5 feet, 6 inches, or 66 inches, is the height of a human. 2.54 centimeters make up one inch (cm). Therefore, to convert your height from inches to centimeters, just multiply it by 2.54. The metric equivalent of a person who is 5 feet, 6 inches tall in this instance is 167.64 cm (66 x 2.54).

Learn more about coulomb here:

https://brainly.com/question/15167088

#SPJ4

Answer: Kinetic energy is the energy an object has because of its motion

(if it needs to be a one worded answer than just type motion)

The potential energy of an object depends on its mass and its height.

The law of conservation of energy states that energy can be neither created nor destroyed, but it can change its form.

Answer:Kinetic energy is the energy an object has because of its motion. If we want to accelerate an object, then we must apply a force. Applying a force requires us to do work.

As expressed by the equation, potential energy depends upon the mass and the height of the object. Any increase in these two quantities will lead to an increase in the amount of potential energy possessed by the object.

The law of conservation of energy states that energy can neither be created nor destroyed - only converted from one form of energy to another. This means that a system always has the same amount of energy, unless it's added from the outside.

The object takes to move is 0.409s.

Calculaiton:

time period T = 4 s

Angular speed ω = 2π/T= 1.57 rad/s

SHM equation

x = A sin ωt

6 = 10 sin(1.57t)

sin(1.57t) = 0.6

1.57 t = 0.6435

t= 0.409s.

The amplitude of a periodic variable is a measure of its change over one period. The amplitude of an aperiodic signal is its magnitude relative to a reference value. Amplitude has various definitions, all of which are functions of the magnitude of the difference between extreme values ​​of a variable. It refers to the maximum displacement from equilibrium exhibited by a body in periodic motion.

Learn more about The amplitude here:- https://brainly.com/question/3613222

#SPJ4

The work done by the hamster-wheel system is 0.0625 J.

The work done by a system or on a system is a measure of the energy input used to do useful work such as moving an object a given distance when force is applied.

Work done is defined as the product of the force applied and the distance moved by the force applied in the direction of the applied force.

Mathematically;

The unit of the applied force is Newton; the unit of the distance moved is in meters and the unit of measurement of work done is Joules.

The work done by the hamster-wheel system is given below:

Force of the hamster = mass * acceleration due to gravity

Force on hamster = 25/ 1000 * 10

Force = 0.25 N

Distance = 25.0 cm or 0.25 m

Work done = 0.25 * 0.25

Work done = 0.0625 J

Learn more about work done at: https://brainly.com/question/26152883

#SPJ1

All the tools of communication such as the drum, telegraph et cetra were used for emergency communication.

We know that communication has to do with the art of sending and receiving information between two people who may or may not be at the same place. We know that the dissemination of information is a very important aspect of life and we have always tried to invent means of communication especially at times when we have an emergency situation that needs a kind of an immediate remedy.

We can see that all the kinds of communication gadgets that have been show here are all from a period that is far behind the kind of civilization that we have to day and the kind of thge communication gadgets that are quite available to the people that are around today.

However, all the tools shown could be used to send information in times of emergency.

Learn more about communication:https://brainly.com/question/14288895

#SPJ1

Answer:

While on the earth, any object with a mass of 0.77 kg weighs 7.546 newtons (1.698 pounds).

On the moon, the same 0.77-kg object would weigh 1.232 newtons (0.277 pound)

Explanation:

Answer:

Explanation:

One possible safety restraint or device for a motorcycle 4-wheeler or go-kart could be a roll cage. A roll cage is a structure that surrounds the driver and is designed to protect them in the event of a rollover or collision.

The roll cage would be made of strong, lightweight material such as steel or aluminum tubing. It would be attached to the frame of the 4-wheeler or go-kart and would extend upward to surround the driver's head and shoulders. The roll cage would also have additional bracing to provide additional support and protection in the event of a collision.

In the event of a rollover or collision, the roll cage would help to distribute the forces of the impact evenly around the driver, protecting them from the full force of the collision. The additional bracing would also help to prevent the roll cage from collapsing or deforming, providing additional protection for the driver.

In addition to the roll cage, the driver could also wear a safety harness or seat belt to help keep them securely attached to the vehicle and prevent them from being thrown out in the event of a collision. This would provide additional protection against the forces of a collision.

Answer:

128.8Km/h

Explanation:

S=d/t

 =64.4/0.5

 =128.8

The poison was most likely found was B)arsenic

What is poisioning?

Poisoning is defined as harm or death brought on by ingesting, inhaling, touching, injecting, or ingesting different medications, chemicals, venoms, or gases. Many chemicals, including pharmaceuticals and carbon monoxide, become dangerous only when they are consumed in large quantities. While some cleaners only cause harm when consumed, others also release hazardous vapors or fumes.

When large doses of arsenic are ingested or inhaled, arsenic poisoning, also known as arsenicosis, occurs. Gray, silver, or white in hue, arsenic is a form of carcinogen. For humans, arsenic is exceedingly dangerous. Because it has no taste or odor, arsenic is particularly hazardous because you can be exposed to it covertly. After death, the toxin leaves residues on the body.

Hence the poison was most likely found was B)arsenic

To know more about poisoning from the given link

https://brainly.com/question/15093396

#SPJ1

The velocity of vehicles after the collision is 15.82m/sec if car mass is 1.4 × 10³kg and truck mass is 2×10³kg

We know that we need to conserve the momentum of watermelon in a certain direction. Also,we know that initial momentum of watermelon is zero,it means that according to law of conservation of momentum final momentum should be zero.

We know that momentum =mass × velocity

So,initial momentum of car is =1.4 × 10³kg × 37km/hr

Similarly,,initial momentum of truck=2×10³kg × 35km/hr

Now,it is given that both vehicles lock together,so total mass of both vehicles is =1.4 × 10³kg +  2×10³kg=3.4 ×10³kg

Assume final velocity of both vehicle is v

So,following the law of conservation,we get

=>1.4 × 10³kg × 37 + 2×10³kg × 35 = 3.4 ×10³ ×v

=>51.8 ×10³ + 2×10³=3.4×10³ ×v

=>53.8 ×10³ kg-m/sec = 3.4×10³ ×v

=>v = 53.8/3.4

=>v=15.82m/sec

Hence,final velocity of both vehicle after collision is 15.82m/sec.

To know more about velocity,visit here:

https://brainly.com/question/18084516

#SPJ4

The work done by the dog is 0.81J.

Work done is a measure of energy expended in moving an object; most commonly calculated by multiplying the force by the distance.

It is said that no work is done if the object does not move.

The work done on an object is the amount of energy transferred to an object through work.

According to this question, a dog lifts a 0.75 kg bone straight up through a distance of 0.11 m. The force applied to break the bone must be calculated first as follows:

Force = mass × acceleration

Force = 0.75kg × 9.8m/s²

Force = 7.35N

Work done = 7.35N × 0.11m = 0.81J

Therefore, 0.81J is the work done by the dog.

Learn more about work done at: https://brainly.com/question/2750803

#SPJ1