Sebastián se encuentra en una parada de trenes. El tren n° 15 pasa sin detenerse a una velocidad de 35 km/h. Si situamos el sistema de referencia en Sebastián, ¿el tren n° 15 está en reposo o en movimiento?

Answers

Answer 1

Answer:

the train is moving relative to the boy

Explanation:

When the train is on the road, it moves with respect to the Earth at a speed of 35 km / h. When we arrive at the station we change the reference system from the ground to the boy who is in the station, therefore the speed of the train can change

               v ’= v + u

where v is the speed of the train with respect to the boy, v is the speed with respect to the ground and u the speed of the boy with respect to the ground

In general, the people in the station are still, that is, their speed with respect to the ground is zero, consequently the speed of the train does not change.

The correct answer is that the train is moving relative to the boy.


Related Questions


If Bulb B burns
out, what happens?
A Bulb A and C will stay lit.

Answers

Answer: C

Explanation:

Since bulb B is burnt out, the wires can't transfer to bulb A, so that's why bulb A will burn out.

If I get it wrong, sorry. Im still learning.

How Do Manometers Work? steps by steps

Answers

Explanation:

A manometer is a device that measures air pressure using a container with a "U"-shaped tube open at one or both ends. In a closed manometer, a sample of gas is introduced into one end, which is then capped. ... This pressure represents the positive or negative difference between the gas pressure and atmospheric pressure

Answer:

I hope this helps

In the manometer, one end connects to a gas-tight seal to test the pressure source.

2. In addition, the other end of the tube is left open to the atmosphere and it will be subjected to the pressure of approximately 1 atmosphere (atm).

3. Besides, the test pressure is greater than the pressure of 1 atm (atmosphere) the liquid in the column will be forced down by the pressure.

4. Furthermore, it will cause the liquid of the reference column to rise by an equal amount.

-8. A vessel is filled with a 20cm of water. When an irregular body of mass 800gm is immersed the volume of water is increased to 60cm3. What is the density of irregular shaped body? ​

Answers

Answer:

13.33 g/cm3

Explanation:

density = mass/volume

mass of irregular body = 800 grams

new volume = 60 cube cm

= density = 800/60  = 13.333 g/cm3

A converging lens of focal length 20cm, forms a real image twice the size of the object. Calculate:
i) the power of the lens;
ii) the position of the image.

Answers

Answer:

Solition given:

focal length(f)=20cm

size of image(v)=2x

size of object(u)=x

we have

power of lens= reciprocal to focal length=1/20=0.05/cm

ii.

the position of the image is beyond C.

Explanation:

See the attachment !!!!!!!

If the force on a spring is 2 N and it stretched 0.5 m, what is the spring constant?
O A. 2 N/m
OB. 0.2 N/m
OC. 0.4 N/m
OD. 4 N/m

Answers

It solved by the Hooke's law states F=kx

answer is

0.4n/m

A 210 Ohm resistor uses 9.28 W of
power. How much current flows
through the resistor?
(Unit = A)

Answers

Resistance=R=210OhmPower=9.28W=P

Current=I

[tex]\boxed{\sf P=I^2R}[/tex]

[tex]\\ \sf\longmapsto I^2=\dfrac{P}{R}[/tex]

[tex]\\ \sf\longmapsto I^2=\dfrac{9.28}{210}[/tex]

[tex]\\ \sf\longmapsto I^2\approx0.04[/tex]

[tex]\\ \sf\longmapsto I\approx\sqrt{0.04}[/tex]

[tex]\\ \sf\longmapsto I\approx\sqrt{\dfrac{4}{100}}[/tex]

[tex]\\ \sf\longmapsto I\approx\dfrac{\sqrt{4}}{\sqrt{100}}[/tex]

[tex]\\ \sf\longmapsto I\approx\dfrac{2}{10}[/tex]

[tex]\\ \sf\longmapsto I\approx0.2A[/tex]

7. Describe about the difficultites that would arise due to lack of non-uniformity in measurement. ​

Answers

Answer:

Many difficulties would arise if there was a lack of uniformity in the measurement of various weights and measures between business, industry, individuals and countries. The biggest implications for a lack of uniformity are in health and safety, equity and sustainability.

Explanation:

palike nlng po

John walked a distance of 900 meters in 10 minutes what was his average speed in kilomerters per hour

Answers

Answer:

5.4

Explanation:

900/10=90 and 90(60)=5400 meters. 5400/100=5.4

3.7 kg of a saturated water vapor at 0.4 MPa is isothermally cooled until it is a saturated liquid. Calculate the amount of heat rejected during this process in MJ. (Report your answer in 3 decimal places.)

Answers

Answer:

7.894 MJ

Explanation:

Given that:

The mass of the saturated water vapor = 3.7 kg

The pressure of the saturated water vapor = 0.4 MPa

From saturated properties of steam tables when the pressure is at 0.4 Mpa

The enthalpy in (kJ/kg);

hf = 604.7 kJ/kg

hg = 2738.1 kJ/kg

The rejected heat during this process is:

Q = m(hg - hf)

Q = 3.7(2738.1 - 604.7) kJ/kg

Q = 3.7(2133.4) kJ/kg

Q = 7893.58 kJ/kg

Q = 7.894 MJ

The question is given in the picture below.... please help me and mention all the steps..​

Answers

Answer:

a)water is turning into ice it is changing it's state from liquid to solid

b)B to C  ice is melting and it  is changing  it's state from solid to liquid

C to D water is boiling and it is changing it's state from liquid to vapours(steam)

c) temperature

At A 0

At B 0

At C 100

At D 100

Explanation: The temperature will remain 0 degrees Celsius until all the ice becomes water and the temperature will remain 100 degrees Celsius until all the  water changes into steam.

A race car sits on the starting line on a racetrack. when the race starts, the car's tires exert a force on the track. According to newton's third law of motion, what causes the car to accelerate forward?
A. the track surface exerts a force that is larger and in the same direction as the force exerted by th tires.
B. a normal force that is equal in a magnitude to gravity pushes up on the car
C. the force of friction between the car tires and the track pulls the car forward
D. the track exerts a force that is equal and in the opposite direction as the force exerted by the tires

Answers

Answer:

D. the track exerts a force that is equal and in the opposite direction as the force exerted by the tires

Explanation:

Newton's third law of motion states that for every action, there is an equal and opposite reaction. This speaks of equality in magnitude of force applied but in an opposite direction to one another.

According to this reaction, a car's tires exert a force on the track, this means that in accordance to Newton's third law, the track must exert an equal but opposite force on the car's tires. This causes the car to accelerate forward.

what will happen to the gravition force between two bodies if the distance between them is halved keeping their masses constant​

Answers

Answer:

The new force will be 4times the original

What is the purpose of the lab the importance of the topic and the question you are trying to answer?

Answers

perpose of lab is to store apparatus and do some experiment

Helps someone to know the exert lengh of something

The image shows a landform created by Earth’s forces.

A dip in a mountain range between two plates.

Which describes this landform?

anticline
shearing
syncline
tension

Answers

The term that best describes the landform "dip in a mountain range" is C. Syncline.

Syncline is a term to refer to a fold of the Earth's crust caused by the tectonic effects of the earth's dynamics. A synclinal fold is characterized by being a concave fold, that is, in the shape of a U.

According to the above, answers A, B and D are not correct options because they refer to different shapes of the Earth. Therefore, the landform shown is syncline.

Learn more at: https://brainly.com/question/17137827

Answer: C

Explanation: E2022

An observer measures a 100 Hz Doppler shift as an ambulance goes by. At rest, the frequency of the ambulance's siren is 2,000 Hz. What is the speed of the ambulance?

Answers

The change in the frequency of the sound, due to the relative motion of the source of sound and the observer, is determined by the Doppler's Effect.

The speed of the ambulance (source) is "6517 m/s"

The equation of Doppler's Effect is given as follows:

[tex]f_o = \frac{v+v_o}{v+v_s}f_s[/tex]

where,

[tex]f_o\\[/tex] = frequency of sound measure by observer  = 100 Hz

v = speed of sound = 343 m/s

[tex]v_o[/tex] = speed of observer = 0 m/s

[tex]v_s[/tex] = speed of ambulance (source) = ?

[tex]f_s[/tex] = actual frequency = 2000 Hz

Therefore, using the values, we get:

[tex]100\ Hz = \frac{343\ m/s + 0\ m/s}{343\ m/s + v_s}(2000\ Hz)\\\\(100\ Hz)(343\ m/s + v_s) = (343\ m/s)(2000\ Hz)\\\\v_s = \frac{686000\ Hz.m/s - 34300\ Hz.m/s}{100\ Hz}[/tex]

v_s = 6517 m/s

Learn more about Doppler's Effect here:

https://brainly.com/question/1330077?referrer=searchResults

If we aim a radio telescope at a distant spiral arm of the Milky Way Galaxy, we will probably observe a 21-cm line. If we point a large optical telescope at this same region, we will probably not be able to detect the neutral hydrogen that gives rise to the 21-cm radio signal. Why not

Answers

Answer:

Because of the interstellar dust and interior location of the solar system.

Explanation:

We will probably not be able to detect the neutral hydrogen that gives rise to the 21-cm radio signal if we point a large optical telescope to the region because, the interstellar dust obscures the location of the spiral arm of the Milky way galaxy and this makes neutral hydrogen that gives rise to the 21-cm radio signal difficult to detect.

Also, the interior location of the solar system also makes the neutral hydrogen that gives rise to the 21-cm radio signal difficult to detect.

So, the interstellar dust and the interior location of the solar system makes it difficult to detect the neutral hydrogen that gives rise to the 21-cm radio signal with a large optical telescope.

how does the siphon work​

Answers

Answer:

A simple siphon raises water over a crest and discharges it at a lower level.It works coninueasly due to pull of gravity.

Explanation:

Siphons are tubes which draw fluid over the rim of a tank to a lower point. After an initial pressure change to initiate the flow, siphons operate continuously due to the pull of gravity.

Working:

A simple siphon raises water over a crest and discharges it at a lower level. As water flows through a siphon, energy due to pressure and elevation is either lost to pipe friction or converted to velocity energy.

physics as a subject involves measurement and estimation,giving examples of everyday life situations, explain the meaning and what is done in each case​

Answers

Answer:

57

Explanation:

the hydrometer with the density of liquid to be 800 kg metre per square is the volume of the submerged part of the hydrometer is 5 into 10 to the power minus 5 calculate the mass of the hydrometer​

Answers

Answer:

Mass = 0.04 Kg

Explanation:

Given the following data;

Density = 800 kg/m³

Volume = 5 * 10^{-5} m³

To find the mass of the object;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex] Density = \frac {mass}{volume} [/tex]

Making mass the subject of formula, we have;

[tex] Mass = density * volume [/tex]

Substituting the values into the formula, we have;

[tex] Mass = 800 * 5 * 10^{-5} [/tex]

Mass = 0.04 Kg

In isoelectric focusing gel electrophoresis a. there is a pH gradient that parallels the electric field gradient b. particular care must be taken to ensure the same pH along the length of the gel c. the electric current is allowed to fluctuate d. the electric circuits of the apparatus must be very well insulated

Answers

Answer:

a. there is a pH gradient that parallels the electric field gradient.

Explanation:

Gel electrophoresis is a technique used to separate DNA fragments according to their size. DNA samples are loaded in the wells and then electric current is applied to pull the DNA fragments out from the gel. Isoelectric gel electrophoresis is a process in which negatively charged DNA fragments are separated from the gel.

A stone is thrown vertically upwards with an initial velocity of 20m/s. Find the maximum height it reaches and the time taken by it to reach the height (g=10m/s).​

Answers

Answer:

20m in 2 secs

Explanation:

t=2s

s=20m

hence the maximum height reached by stone is 20m in 2 s

Describe the laws of liquid pressure and explain the term fluid. (Please try to give the correct answer 'coz it's urgent!)​

Answers

Answer:

The laws of liquid pressure are: ... The liquid pressure at a point inside the liquid is same in all directions. The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid. The pressure of liquid at same depth is different for different liquids

Answer:

The laws of liquid pressure:

The pressure that is inside the liquid rises with the intensity from the surface of a liquid.

The term fluid:

Fluid is basically liquid and a substance that is known to have no certain shape. The opposite of the term fluid would be solid.

the mass of earth is 6*10^24 and of mars is 6*10^23 and gravitational force is 6.67*10^16 ,find the distance between their centres.​

Answers

Answer:

6× 10¹⁰ metres

Explanation:

F=(G×M1×M2)/r²

(6.67×10¹⁶)=((6.67×10^-11)(6×10²⁴)(6×10²³))/r²

r²=3.6×10²¹

Therefore r=6×10¹⁰ metres

is iron and copper brittle​

Answers

Answer:

no

Explanation:

they are metal and there property is strong and hard

Q010) A well in which the water rises on its own to a level above its aquifer Group of answer choices is the result of pressure within a confined aquifer that creates a potentiometric surface. is called an ordinary well. always pushes water higher than the ground surface. cannot be used for commercial or public use, as the water is under too much pressure.

Answers

Answer:

The result of pressure within a confined aquifer that creates a potentiometric surface

Explanation:

There are conditions under the Earth's surface, where porous rock layers are tilted and also have a confining, less porous, rock layer about the their boundary, forming a confined aquifer. The existing pressure in the aquifer is therefore confined within the water and the porous  rock layer, such that drilling into the pressurized aquifer leads to the water rising under the pressure existing in the aquifer, to a potentiometric surface which is above the actual underground level of the aquifer

Which choice shows the correct sequence of features formed by continued wave erosion?

Answers

Answer:

Wave-cut cliff, sea arch, sea stacks

Explanation:

The effect of a wave erosion is made obvious by the structures formed by the wave action.

The high areas of land adjacent to the incoming wave develop the early features or the formation of wave action, which includes the wave-cut cliff

The continuous undercutting of the cliff by the wave results in the formation of the wave cut platform

The effect of the wave further on a cliff, results in the formation of a sea arch and finally a sea stack

Therefore, the correct sequence is the wave-cut cliff, sea arch, sea stacks

a load of 800 newton is lifted by an effort of 200 Newton. if the load is placed at a distance of 10 cm from the fulcrum. what will be the effort distance ?​

Answers

Answer:

40 cm

Explanation:

We are given that

Load=800 N

Effort=200 N

Load  distance=10 cm

We have to find the effort distance.

We know that

[tex]load\times load\;distance=Effort\times effort\;distance[/tex]

Using the formula

[tex]800\times 10=200\times effort\;distance[/tex]

Effort distance=[tex]\frac{800\times 10}{200}[/tex]

Effort distance=[tex]\frac{8000}{200}[/tex]

Effort distance=40 cm

Hence,  the effort distance will be 40 cm.

7. A thin wire was wound 30 times closely over a boiling tube. The total length of the windings as measured was found to be 6.3mm. Determine the diameter of the wire .​

Answers

Answer:

Diameter of wire = 0.00021 meters

Explanation:

Given the following data;

Number of windings = 30

Length of windings = 6.3 mm to meters = 0.0063 meters

To find the diameter of the wire, we would use this mathematical expression;

Length of windings = number of windings * diameter of wire

Substituting the values into the expression, we have;

0.0063 = 30 * diameter of wire

Diameter of wire = 0.0063/30

Diameter of wire = 0.00021 meters

A car is traveling at 36km/h when it accelerates and after 2 seconds the car reaches a speed of 54km/h. Calculate the speed of the car in 2s?

Answers

Answer:18km





Answer:18km

54-36=18

Explain how a submarine
floats on the water surface
and dives down into water.

Answers

Answer:

A submarine uses tanks that are filled with compressed air and when it is needed the air is released and takes on water which increase the density making it sink but when the water is pushed out the sub marine density is decreased making it float

Other Questions
When Dunkin Donuts decided to expand into the international markets of India, Japan, and Argentina, management realized that there would be significant differences in the standards of living, credit, buying power, and income distribution in those countries. Dunkin Donuts is currently examining the ____ forces in its environmental analysis. Find the coefficient of x^4 in the expansion of (x9)^8Please I need help!! 2.The height of a kicked football can be represented by the polynomial - 16+ + 22t+3, where tis the time in seconds. Find the factored form of the polynomial.-5A) (8t + 3)(-2t + 1)OB) (-8t+ 3)(2t+ 1)8OC) (8t+ 1)(-2t + 3)OD) (-8t + 1)(2t+ 3) if government expenditure on goods and services increase by $100 billion, then aggregate demand _____ if the multiplier exists according to the keynesian model Pls pls pls help me Explain what effects the Norwegian prison experience might have on the community when offenders are released back into the community. If you wanted to test your hypothesis, how would you study and measure those effects? What is constitution Which of the following entries could be considered as an adjusting entry? Group of answer choices Debit to Cash and Credit to Revenues Debit to Cash and Credit to Liabilities Credit to Cash and Debit to Expenses Debit to Expenses and Credit to Liabilities What is the equation, In factored form, of the quadratic function shown in the graph? A. AB. CC. DD. BHELLLP GUYS!!! Determine the measure of Methanal is the simplest aldehyde, with one carbon atom. Draw the structural model for methanal (using C and H). There are 18 girls in a class and the ratio of the number of girls and boys in the class is 3:2. Find the number of boys. Translate this sentence into an equation.The product of Rhonda's height and 4 is 52.Use the variable r to represent Rhonda's height. Global institutions are needed to _____. Multiple choice question. shift economic power away from national governments prevent firms from offshoring their production activities stabilize and monitor the global marketplace promote the raising of barriers to cross-trade and investment What is the solution to |x + 2| < 1? Find the value of y in the equation y=-4x+9 when x=-3 What is the answer to this question Please help solve this problem. The grange began as _____.a) an economic protestb) support for labor unionsc) a social and educational movementd) a political party that pushed for social reforms