Someone please helpppp!

Answer:

cell membrane.

Explanation:

A cell can be defined as the fundamental or basic functional, structural and smallest unit of life for all living organisms. Some living organisms are unicellular while others are multicellular in nature.

A unicellular organism refers to a living organism that possess a single-cell while a multicellular organism has many (multiple) cells.

Generally, cells have the ability to independently replicate themselves. In a cell, the "workers" that perform various functions or tasks for the survival of the living organism are referred to as organelles. Some examples of cell organelles found in all living organisms such as trees, birds, and bacteria include; nucleus, cytoplasm, cell membrane, golgi apparatus, mitochondria, lysosomes, ribosomes, chromosomes, endoplasmic reticulum, vesicles, etc.

Cell membrane is the wall of a cell in living organisms and it typically functions as a door and window in a house by controlling what leaves and enters the cell at any given time. Also, the cell membrane opens selectively and as such it would only open at certain times and to certain chemical changes or signals.

This ultimately implies that, the part of an animal cell that is like the doors and windows in Martha's house is the cell membrane.

Answer:

give the guy above brainlist

he did a very good job.

Explanation:

Answer:

5

Explanation:

The light intensity may be defined as the strength of the light or the magnitude of its brightness that a source of light can produce.

The light threshold is the minimum intensity of the light that our eye can detect and the ability to adapt to darkness.

In the context, Daniel wishes to find if can notice the difference in the intensity of the light when he add 5 candles to the set of 50 candles.

He noticed that when he added 5 candles, he could notice the difference in the intensity and when he added less than 5 candles to the set of 50 candles he could not detect.

Thus, the difference threshold for Daniel to detect the change in the intensity of the light is 5 candles.

Answer:

A

Explanation:

Answer:

90 A

Explanation:

Applying,

P = VI.............. Equation 1

Where P = Power, V = Supply voltage, I = current.

Make I the subject of the equation

I = P/V.............. Equation 2

From the question,

Assuming the Voltage of the main electric supply is 120 V

Given: P = 10.8 kW = 10800 W, V = 120 V (household voltage)

Substitute these values into equation 2

I = 10800/120

I = 90 A

Answer: Artificial Selection

Explanation: Artificial Selection is described as the identification of desirable traits in both plants and animals, then enhance them, so that those traits can be manifested in future generations.

This is the scope behind cross breeding of plants and animals and this have largely been used in agricultural sector to improve input (such as disease-resistant seeds) and other biotechnological settings.

Darwin's described artificial selection as the human form of natural selection.

Answer:

A simple machine is a device that multiply an applied force by the use of the mechanical advantage built into the machine. Therefore, a simple machine changes the direction in which the applied force acts or the magnitude of the applied force, or both in order to do work

A retractable measuring tape is a device used for length measurement such that the direction of the applied force is reversed during retraction, while the magnitude of the output force is constant and dependent on the coil in the measuring

Therefore, the measuring tape does not have a constant mechanical advantage or act as a force multiplier, and therefore;

It is not a simple machine

Explanation:

Answer:

Ohm's law verifies that current directly varies with voltage, when resistance increases, current current decreases.

When temperature increases, the electrons gain more average kinetic energy increases and current increases as well.

In the same situation, resistance also increases because atoms of a component vibrate at higher amplitudes about their mean positions hence reducing the free path of electrons. This increases resistance, hence ohms law violated or disobeyed.

This generates the temperature coefficient of resistance

Answer:

Supongo que queremos determinar la carga de la carga de prueba.

Sabemos que la fuerza culombiana entre dos cargas q₁ y q₂, separadas por una distancia R, está dada por:

[tex]F = k_c*\frac{|q_1*q_2|}{R^2}[/tex]

Aislandolo para una de las cargas, obtenemos:

[tex]\frac{F*R^2}{kc*|q_1|} =|q_2|[/tex]

En este caso sabemos:

fuerza atractiva, por lo que los signos de las cargas son opuestos.

q₁  = 5 mC

R = 35cm

F = 1.5 N

Kc = 9*10^9 N*m^2/C^2

Un primer paso, seria reescribir todos los valores en las mismas unidades.

Sabiendo que:

100cm = 1m

R = 35cm = (35/100) m = 0.35m

Y sabiendo que:

1mc = 1*10^(-6) C

Entonces:

q₁  = 5 mC = 5*1*10^(-6) C = 5*10^(-6) C

Ahora podemos reemplazar esos valores en la ecuación de la fuerza, para obtener el valor de la otra carga:

[tex]\frac{15N*(0.35m)^2}{(9*10^9 N*m^2/C^2)*5*10^{-6}C} =|q_2| = 4.08*10^{-5} C[/tex]

Y recordar que las cargas tienen signo opuesto, entonces la carga de la carga de prueba es:

q₂ = -4.08*10^-5 C

Answer:

5.2 s

Explanation:

From the question given above, the following data were obtained:

Velocity = 7.5 m/s

Displacement = 39 m up

Time =?

The time taken for the cable cab to get to 39 m can be obtained as follow:

Velocity = Displacement / Time

7.5 = 39 / time

Cross multiply

7.5 × time = 39

Divide both side by 7.5

Time = 39 / 7.5

Time = 5.2 s

Thus, the time taken for the cable cab to get to 39 m up is 5.2 s

Answer:

F = 124 N

Explanation:

Given that,

The mass of bicycle and the rider, m = 12 kg + 50 kg = 62 kg

Acceleration of system, a = 2 m/s²

We need to find the force required to accelerate the system. We know that,

Net force, F = ma

Put all the values,

F = 62 kg × 2 m/s²

F = 124 N

So, the required force is equal to 124 N.

Answer:

-0.75 m

Explanation:

The displacement of the girl is given by x = x₀cosωt where x₀ = maximum displacement of swing = 1.5 m, ω = angular frequency = π/3 rad/s and t = time of swing = 4 s

Substituting the values of the variables into the equation, we have

x = x₀cosωt

x = (1.5 m)cos(π/3 rad/s × 4 s)

x = (1.5 m)cos(2π/3)

x = (1.5 m)cos120°

x = 1.5 m × -0.5

x = -0.75 m

So, the girl is 0.75 m to the left of the equilibrium position 4 seconds into the motion.

Answer:

The net magnetic field ta the center of square is[tex]1.36\times10^{-4} T[/tex].

Explanation:

Current, I = 12 A , side ,a = 10 cm =  0.1 m

Let the magnetic field due to the one side is B.

The magnetic field is given by

[tex]B = \frac{\mu o}{4\pi}\times \frac{I}{r}\times \left (Sin A +Sin B \right )\\\\B = 10^{-7}\times \frac{12}{0.05}\times \left ( sin 45 + sin 45 \right )\\\\B = 3.4\times 10^{-5} T[/tex]

Net magnetic field at the center of the square is

B' = 4 B

[tex]B'= 4\times 3.4\times 10^{-5}\\\\B' = 1.36\times10^{-4} T[/tex]

Answer:

12.0 Volt

Explanation:

Step 1: Given data

Resistance of the ohmic dipole (R): 100 Ohm

Intensity of current (I): 120 mA (0.120 A)

Step 2: Calculate the voltage (V) across this chemical dipole

To calculate the voltage across the ohmic dipole, we will use Ohm's law.

I = V/R

V = I × R

V = 0.120 A × 100 Ohm = 12.0 V

Answer:

D.

[tex]impulse = force \times time \\ = 60 \times 10 \times 20 \\ = 12000 \: kgm {s}^{ - 1} [/tex]

Option C: 60 mass of child/kg & 10 time / s

hope this helps :)

Answer:

ml tayo 1v1 durugin kita

Explanation:

ano takot ml 1v1

Answer:

Time = 80.91 seconds

Explanation:

Given the following data;

Velocity = 5.50 m/s.

Distance = 445 meters

To find the time;

Velocity can be defined as the rate of change in displacement (distance) with time. Velocity is a vector quantity and as such it has both magnitude and direction.

Mathematically, velocity is given by the equation;

[tex]Velocity = \frac{distance}{time}[/tex]

Substituting into the formula, we have;

5.5 = 445/time

Time = 445/5.5

Time = 80.91 seconds

Answer:

Since it us the resistance that causes the power output, it might be intuitive to think that more resistance produces more power but as P=I^2 * R one actually needs high current and low resistqnce. That means 75 W has lower resistance and higher current.

Now you may think that making the resistance very low, one gets the most power. Not so, as the circuit has wires, power source etc. All the have their resistance. In theory one gets the maximum power over a resistor when the resistor is half of the total resistance of the circuit. This in practice would be inefficient as one would lose half of the total power elsewhere. In practice circuits have fuses that limit the current and one gets the maximum power at the current the fuse is rated to. So if there is 20 A fuse, the maximum power is 2400 W and the corresponding resistance 6 ohm.

Answer:

Diana and that

Explanation:

muyayyano

Answer:

nice calculations!

Explanation:

Answer: hello your question lacks some data attached below is the missing data

answer : T - mg = ma[tex]_{c}[/tex]

Explanation:

Given that the vine has a fixed end and Tarzan's path is circular

At Tarzans lowest point the point can be expressed as shown below.

It can be expressed as : T - mg = ma[tex]_{c}[/tex]

Answer:

Explanation:

F = ma and

[tex]a=\frac{v}{t}[/tex]

We have F, we have m, but in order to solve for v, we need a.

30.0 = 3.00a so

a = 10.0 m/s/s. Plug that in for a in the second equation and solve for v:

[tex]10.0=\frac{v}{3.00}[/tex] so

v = 10.0(3.00) so

v = 30.0 m/s

The star is bigger than our sun. The correct option is 1.

The flow chart of the life cycle of a star indicates that the star starts as a nebula, which is a cloud of gas and dust. The nebula can collapse due to gravitational forces and form a protostar. The protostar can then continue to contract and heat up until it reaches a temperature and density at which nuclear fusion can occur, leading to the star entering the main sequence phase.

The size of a star is determined by its mass, and the more massive a star is, the bigger it will be. Based on this information, we can infer that if a star follows the life cycle shown in the flow chart, starting from a nebula and eventually reaching the main sequence, it must be at least as massive as our sun or even more massive, since only stars with sufficient mass can become main sequence stars.

To learn about the heliocentric model of the Solar System click:

https://brainly.com/question/12075871

#SPJ2

Answer:

Total momentum of both is 16250 kgm/s

Answer:

1. The reason why nichrome wire is used in a heater is due to the properties of nichrome which makes it a material of choice for heating application including;

i) The cost of manufacture of nichrome is low

ii) Nichrome has both high mechanical and creep strength, and therefore is suitable for installation and use in a wide setting

iii) Nichrome has a high resistance to electron flow, making it a good electrical heating element

iv) Nichrome has a high resistance to oxidation, such that it can be reused several times as a heater

v) The high ductility of nichrome allows it to be stretched and drawn around different vessels with contents to which heat is to be supplied

2. Copper wire is not used in heaters because according to Joule's law, the heat produced from the flow of electric current, 'I', through a material having a resistance, 'R', for a time, 't', is proportional to I²·R·t, and copper has a very low resistance, 'R', to the flow of electric current, and therefore, will not produce sufficient heat required at a given current level

Explanation:

Answer:

the answer from my side is both vertical and horizontal

Answer:

Entirely horizontal

Explanation:

The ball begins the movement with horizontal and vertical velocity, but it is subject to the gravity acceleration, that will break the movement. When it achieves the top of the path, is when the vertical velocity go to 0 and begin to grow in the opposite direction, so in the very top of the path, the velocity is entirely horizontal

Answer:

The answer is C because they have to be close to be able to interact

Answer:

C. where the electric field lines are closest together 

Explanation:

Answer:

[tex] |B| = \sqrt{ {B _{x} }^{2} + {B _{y} }^{2} } \\ = \sqrt{ {7}^{2} + {5}^{2} } \\ = \sqrt{74} \\ = 8.6[/tex]

[tex]let \: the \: angle \: be \: \theta \\ \tan(\theta) = \frac{B _{y} }{B _{x} } \\ \tan( \theta) = \frac{ - 5}{7} \\ \theta = { \tan }^{ - 1} ( \frac{ - 5}{7} ) \\ = 35.5 \degree[/tex]