Sophia is putting together a training manual for her new batch of employees.Which of the following features can she use to add a document title at the top of each page?
A) Heading style
B) Page margin
C) References
D) Header and Footer

Answer:

thanks for your question

Answer:

The security principle being referred to here is:

Resource Encapsulation.

Explanation:

Resource Encapsulation is one of the cybersecurity first principles.  It allows access or manipulation of the class data as intended by the designer. The cybersecurity first principles are the basic or foundational propositions that define the qualities of a system that can contribute to cybersecurity.  Other cybersecurity first principles, which are applied during system design, include domain separation, process isolation, modularization, abstraction, least principle, layering, data hiding, simplicity, and minimization.

Apple OSX is not a computer application.

The information regarding the computer application is as follows:

Therefore we can conclude that Apple OSX is not a computer application.

Learn more about the computer here: brainly.com/question/24504878

a computer works on input processing output device true

Answer:

a computer works on input processing output device. True

Explanation:

God bless you.

Answer:

Explanation:

A computer that is easy to operate is called User Friendly

Answer:

A computer is an electronic device that accept raw data and instructions and process it to give meaningful results.

Answer:

Gantt charts

Explanation:

Gantt charts control all aspects of your project plan from scheduling to assigning tasks and even monitoring progress. A Gantt chart shows your tasks across a timeline and puts them in phases for better organization.

This is true for most modern computers

Answer:

Managed devices

Explanation:

hope it helps u

The properties and origin of the Cartesian product as stated in the paragraph

is true, and the correct option is option;

a. True

The reason why the above option is correct is stated as follows;

In set theory, the Cartesian product of two number sets such as set A and set

B which can be denoted as lists of numbers is represented as A×B and is the

set of all ordered pair or points (a, b), with a being located in A and b located

in the set B, which can be expressed as follows;

[tex]\left[\begin{array}{c}A&x&y\\z\end{array}\right] \left[\begin{array}{ccc}B(1&2&3)\\\mathbf{(x, 1)&\mathbf{(x, 2)}&\mathbf{(x, 3)}\\\mathbf{(y, 1)}&\mathbf{(y, 2)}&\mathbf{(y, 3)}\\\mathbf{(z, 1)}&\mathbf{(z, 2)}&\mathbf{(z, 3)}\end{array}\right]}[/tex]

The name Cartesian product is derived from the name of the philosopher,

scientist and mathematician Rene Descartes due to the concept being

originated from his analytical geometry formulations

Therefore, the statement is true

Learn more about cartesian product here:

https://brainly.com/question/13266753

The inside attacker should be a non-intentional threat actor that represents the most common threat.

The following information related to the inside attacker is:

Therefore we can conclude that The inside attacker should be a non-intentional threat actor that represents the most common threat.

Learn more about the threat here: brainly.com/question/3275422

Answer:

answer would be D. I do customer service and would never give information over the phone always give a solution

In order to resolve this problem correctly, you should: D. reset the password and have her check her email account to verify she has the information.

Cybersecurity can be defined as a group of preventive practice that are adopted for the protection of computers, software applications (programs), servers, networks, and data from unauthorized access, attack, potential theft, or damage, through the use of the following;

For web assistance, the security standard and policy which must be adopted to enhance data integrity, secure (protect) data and mitigate any unauthorized access or usage of a user's sensitive information such as username and password, by a hacker, is to ensure the information is shared discreetly with the user but not over the phone (call).

In this context, the most appropriate thing to do would be resetting the password and have the customer check her email account to verify she has the information.

Read more: https://brainly.com/question/24112967

Answer:

Explanation:

The following program is written in Java. It is a function that takes in the two parameters, combines them as a String, turns the combined String back into an integer, and uses a series of IF statements to check the parameters and determine which season it belongs to. Then it prints the season to the screen. The code has been tested with the example provided in the question and the output can be seen in the attached image below.

class Brainly {

   public static void main(String[] args) {

       getSeason(4, 65);

       getSeason(4, 11);

   }

   public static void getSeason(int month, int day) {

       String combined = String.valueOf(month) + String.valueOf(day);

       int combinedInt = Integer.parseInt(combined);

       if ((month > 0 && month < 12) && (day > 0 && day < 31)) {

           if ((combinedInt >= 320) && (combinedInt <= 620)) {

               System.out.println("The Season is Spring");

           } else if ((combinedInt >= 621) && (combinedInt <= 921)) {

               System.out.println("The Season is Summer");

           } else if ((combinedInt >= 922) && (combinedInt <= 1220)) {

               System.out.println("The season is Autumn");

           } else {

               System.out.println("The Season is Winter");

           }

       } else {

           System.out.println("Invalid date");

       }

   }

}

Answer:

A

Explanation:

Answer:

1.

190.190.190.190

Class B

Number of octets in the network part of the address: 2

Number of octets in the host part of the address: 2

Network number: 190.190.0.0/16

Network broadcast address: 190.190.255.255

2.

200.1.1.1

Class C

Number of octets in the network part of the address: 3

Number of octets in the host part of the address: 1

Network number: 200.1.1.0/24

Network broadcast address: 200.1.1.255

Explanation:

Answer:

false

Explanation:

My teacher quized me on this

Answer:

vxxgxfufjdfhgffghgfghgffh

Answer:

The program in Python is as follows:

current_price = int(input("Current Price: "))

last_price = int(input("Last Month Price: "))

change = current_price - last_price

mortgage = (current_price * 0.051) / 12

print('Change: {:.2f} '.format(change))

print('Mortgage: {:.2f}'.format(mortgage))

Explanation:

This gets input for current price

current_price = int(input("Current Price: "))

This gets input for last month price

last_price = int(input("Last Month Price: "))

This calculates the price change

change = current_price - last_price

This calculates the mortgage

mortgage = (current_price * 0.051) / 12

This prints the calculated change

print('Change: {:.2f} '.format(change))

This prints the calculated monthly mortgage

print('Mortgage: {:.2f}'.format(mortgage))

Answer:

current_price = int(input())

last_months_price = int(input())

change = current_price - last_months_price

mortgage = current_price * 0.051 / 12

print('This house is $', end= '')

print(current_price, end= '. ')

print('The change is $', end= '')

print(change, end= ' ')

print('since last month.')

print('The estimated monthly mortgage is $', end= '')

print(mortgage, end='0.\n')

Answer:

Hence the correct option is 2nd option. all integer exceptions.

Explanation:

A catch block that expects an integer argument will catch all integer exceptions.

Answer:

Direct memory access (DMA) is a process that allows an input/output (I/O) device to send or receive data directly to or from the main memory, bypassing the CPU to speed up memory operations and this process is managed by a chip known as a DMA controller (DMAC).

Explanation:

A defined portion of memory is used to send data directly from a peripheral to the motherboard without involving the microprocessor, so that the process does not interfere with overall computer operation.

In older computers, four DMA channels were numbered 0, 1, 2 and 3. When the 16-bit industry standard architecture (ISA) expansion bus was introduced, channels 5, 6 and 7 were added.

ISA was a computer bus standard for IBM-compatible computers, allowing a device to initiate transactions (bus mastering) at a quicker speed. The ISA DMA controller has 8 DMA channels, each one of which associated with a 16-bit address and count registers.

ISA has since been replaced by accelerated graphics port (AGP) and peripheral component interconnect (PCI) expansion cards, which are much faster. Each DMA transfers approximately 2 MB of data per second.

A computer's system resource tools are used for communication between hardware and software. The four types of system resources are:

DMA channels are used to communicate data between the peripheral device and the system memory. All four system resources rely on certain lines on a bus. Some lines on the bus are used for IRQs, some for addresses (the I/O addresses and the memory address) and some for DMA channels.

A DMA channel enables a device to transfer data without exposing the CPU to a work overload. Without the DMA channels, the CPU copies every piece of data using a peripheral bus from the I/O device. Using a peripheral bus occupies the CPU during the read/write process and does not allow other work to be performed until the operation is completed.

With DMA, the CPU can process other tasks while data transfer is being performed. The transfer of data is first initiated by the CPU. The data block can be transferred to and from memory by the DMAC in three ways.

In burst mode, the system bus is released only after the data transfer is completed. In cycle stealing mode, during the transfer of data between the DMA channel and I/O device, the system bus is relinquished for a few clock cycles so that the CPU can perform other tasks. When the data transfer is complete, the CPU receives an interrupt request from the DMA controller. In transparent mode, the DMAC can take charge of the system bus only when it is not required by the processor.

However, using a DMA controller might cause cache coherency problems. The data stored in RAM accessed by the DMA controller may not be updated with the correct cache data if the CPU is using external memory.

Solutions include flushing cache lines before starting outgoing DMA transfers, or performing a cache invalidation on incoming DMA transfers when external writes are signaled to the cache controller.

Answer:

See explanation

Explanation:

DMA [tex]\to[/tex] Direct Memory Access.

The peripherals of a computer system are always in need to communicate with the main memory; it is the duty of the DMA to allow these peripherals to transfer data to and from the memory.

The first step is that the processor starts the DMA controller, then the peripheral is prepared to send or receive the data; lastly, the DMA sends signal when the peripheral is ready to carry out its operation.

If I'm understanding the question correctly, you are looking for an integer b (b ≠ 0, b ≠ 1) such that

[tex]34_b = 22_{10}[/tex]

In other words, you're solving for b such that

3×b ¹ + 4×b ⁰ = 22

or

3b + 4 = 22

Solving this is trivial:

3b + 4 = 22

3b = 18

b = 6

So we have

34₆ = 22₁₀

D. digital

Explanation:

I hope it helps you

Answer:

The OSI Model (Open Systems Interconnection Model) is a conceptual framework used to describe the functions of a networking system. The OSI model characterizes computing functions into a universal set of rules and requirements in order to support interoperability between different products and software.

Answer:

Now, it has been a while since I have written any sort of pseudocode. So please take this answer with a grain of salt. Essentially pseudocode is a methodology used by programmers to represent the implementation of an algorithm.

create a variable(userInput) that stores the input value.

create a variable(celsius) that takes userInput and applies the Fahrenheit to Celsius formula to it

Fahrenheit to Celsius algorithm is (userInput - 32) * (5/9)

Actual python code:

def main():

   userInput = int(input("Fahrenheit to Celsius: "))

   celsius = (userInput - 32) * (5/9)

   print(str(celsius))

main()

Explanation:

I hope this helped :) If it didn't tell me what went wrong so I can make sure not to make that mistake again on any question.    

Answer:

Testing that super user (SYSADMIN) access is limited to only appropriate personnel.

Explanation:

A test for logical access at an organization being audited would include testing that super user (SYSADMIN) access is limited to only appropriate personnel.

Answer and Explanation:

In C programming language:

char fun(int*a, int*b){

printf("enter two integers: ");

scanf("%d%d",a,b);

int e;

printf("please enter a character: ");

e=getchar();

return e;

}

int main(int argc, char *argv[]) {

int d;

int f;

int g;

fun();

printf("%d%d%d", d, f, g);

}

We have declared a function fun type char above and called it in main. Note how he use the getchar function in c which reads the next available character(after the user inputs with printf()) and returns it as an integer. We then return the variable e holding the integer value as char fun() return value.

Answer:

Code:

import java.util.*;  

public class Greetings  

{  

   public static void main(String[] args)  

   {        

       Scanner s = new Scanner(System.in);  

       System.out.println(getGreetings(s));  

   }  

   private static String getGreetings(Scanner console)  

   {          

   System.out.print("Please enter your first name: ");  

   String firstName=console.next();    

   char firstChar=firstName.toUpperCase().charAt(0);  

   System.out.print("Please enter your last name: ");  

   String lastName=console.next();    

   lastName=lastName.toUpperCase().charAt(0)+lastName.substring(1, lastName.length());  

   System.out.print("Please enter your year of birth: ");  

   int year=console.nextInt();  

   int age=getCurrentYear()-year;  

   return "Greetings, "+firstChar+". "+lastName+"! You are about "+age+" years old.";  

   }  

   private static int getCurrentYear()  

   {  

       return Calendar.getInstance().get(Calendar.YEAR);  

   }  

}

Output:-

Answer:

import pandas as pd

def load_data():

df = pd.read_csv("airline-safety.csv')

num_rows = df.shape[0]

num_cols = df.shape[1]

return df, num_rows, num_cols

Explanation:

Using the pandas python package.

We import the package using the import keyword as pd and we call the pandas methods using the dot(.) notation

pd.read_csv reads the csv data into df variable.

To access the shape of the data which is returned as an array in the format[number of rows, number of columns]

That is ; a data frame with a shape value of [10, 10] has 10 rows and 10 columns.

To access the value of arrays we use square brackets. With values starting with an index of 0 and so on.

The row value is assigned to the variable num_rows and column value assigned to num_cols

Answer

Medical Training

From operating MRI equipment to performing complex surgeries, AR tech holds the potential to boost the depth and effectiveness of medical training in many areas. Students at the Cleveland Clinic at Case Western Reserve University, for example, will now learn anatomy utilizing an AR headset allowing them to delve into the human body in an interactive 3D format.

it is also use in retail ,. Repair & Maintenance,Design & Modeling,Business Logistics etc

Answer:

no sé jejejejeje

lslsl

lonsinet

ko