Answer:
Following are the description of the given nodes:
Explanation:
The Multiple Access frequency - division facilitates control by granting every node a fixed time slot. Also, every slot seems to be identical in width. Its whole channel bandwidth is often used in every channel node. Compared to FDMA it takes more time.
Time slot=3 frames for all the above scenario
In the first point, It is reserved the node 1, and as well as 3 frames were also transmitted 1. In the second point, It is reserved the node 2, and as well as 3 frames are transmitted. In the third point, It is reserved 3 nodes, and as well as 3 frames were transmitted. In the fourth point, It is reserved 4 slots and the transmit 3 frames. In the fifth point, It stores the slot 1 and the transmit 3 frames. In the sixth point, It stores the slot 2 and the transmit 1 frame. In the seventh point, It stores the slot 3 and the transmit 3 frames. In the Eight points, It stores the slot 3 and the transmit 2 frames.Time interval = number of frames in first slot Time to send 1 frame number of images
[tex]= 8 \times 3 \times 1 \\\\ = 8 \times 3 \\\\= 24 \ seconds[/tex]
3. Which of the following is called address operator?
a)*
b) &
c).
d) %
Answer:
The Ampersand Symbol (Option B)
Explanation:
A 'address of operator' specifies that a given value that is read needs to be stored at the address of 'x'.
The address operator is represented by the ampersand symbol. ( & )
Hope this helps.
Develop a CPP program to test is an array conforms heap ordered binary tree. This program read data from cin (console) and gives an error if the last item entered violates the heap condition. Use will enter at most 7 numbers. Example runs and comments (after // ) are below. Your program does not print any comments. An output similar to Exp-3 and Exp-4 is expected.
Exp-1:
Enter a number: 65
Enter a number: 56 // this is first item (root,[1]) in the heap three. it does not violate any other item. So, no // this is third [3] number, should be less than or equal to its root ([1])
Enter a number: 45 // this is fourth number, should be less than or equal to its root ([2])
Enter a number: 61 // this is fifth number, should be less than or equal to its root ([2]). It is not, 61 > 55. The 61 violated the heap.
Exp-2:
Enter a number: 100
Enter a number: 95 1/ 95 < 100, OK
Enter a number: 76 // 76 < 100, OK
Enter a number: 58 // 58 < 95, OK
Enter a number: 66 1/ 66 < 95, OK
Enter a number: 58 // 58 < 76, OK
Enter a number: 66 // 66 < 76, OK
Exp-3:
Enter a number: -15
Enter a number: -5
-5 violated the heap.
Exp-4:
Enter a number: 45
Enter a number: 0
Enter a number: 55
55 violated the heap.
Answer:
Following are the code to this question:
#include<iostream>//import header file
using namespace std;
int main()//defining main method
{
int ar[7];//defining 1_D array that stores value
int i,x=0,l1=1,j; //defining integer variable
for(i=0;i<7;i++)//defining for loop for input value from user ends
{
cout<<"Enter a Number: ";//print message
cin>>ar[i];//input value in array
if(l1<=2 && i>0)//using if block that checks the array values
{
x++;//increment the value of x by 1
}
if(l1>2 && i>0)//using if block that checks the array values
{
l1=l1-2;//using l1 variable that decrases the l1 value by 2
}
j=i-x;//using j variable that holds the index of the root of the subtree
if(i>0 && ar[j]>ar[i])// use if block that checks heap condition
{
l1++; //increment the value of l1 variable
}
if(i>0 && ar[j]<ar[i])// using the if block that violate the heap rule
{
cout<<ar[i]<<" "<<"Violate the heap";//print message with value
break;//using break keyword
}
}
return 0;
}
Output:
1)
Enter a Number: -15
Enter a Number: -5
-5 Violate the heap
2)
Enter a Number: 45
Enter a Number: 0
Enter a Number: 55
55 Violate the heap
Explanation:
In the above-given C++ language code, an array "ar" and other integer variables " i,x,l1, j" is declared, in which "i" variable used in the loop for input values from the user end.In this loop two, if block is defined, that checks the array values and in the first, if the block it will increment the value of x, and in the second if the block, it will decrease the l1 value by 2.In the next step, j variable is used that is the index of the root of the subtree. In the next step, another if block is used, that checks heap condition, that increment the value of l1 variable. In the, if block it violate the heap rule and print its values.Show using a cross-product construction that the class of regular languages is closed under set difference. You do not need an inductive proof, but you should convincingly explain why your construction works.
Answer:
The class definition for Javascript:
var Class = {
arguments of the class object are initialized here;
}
This class definition for Python:
class "class_name"( object ):
def __init__(self, arguments are passed are and initialized after the closing parenthesis)
Explanation:
Object-oriented programming languages are vital tools in creating data structures that are meant to be changeable, unindexed but directly accessible knowing the key value, and has unique membership.
This clearly is an adoption of the set data structure rule in creating a data structure blueprint that can be instantiated anytime in the code.
If the processor has 32 address lines in its address bus; i.e. 32-bit address range, what is its address space or range; i.e. what is the smallest and largest address that can be represented
Answer:
The answer is "0 to 4294967295"
Explanation:
Given bit:
32 bits
Calculating smallest and largest bits:
In any processor, it works only on the 0 and 1 bit and it also stores 0 and 1 values. so, the smallest address in bit value is= 0 and the largest bit value can be defined as follows:
largest address value in bits:
[tex]\Longrightarrow 2^{32}-1\\\\\Longrightarrow 4294967296 -1\\\\\Longrightarrow 4294967295\\\\[/tex]
smallest address= 0
largest address = 4294967295
Internet radio probably uses UDP because it is a connection-less protocol and streaming media typically does not require an established connection.
a. True
b. False
Answer:
True
Explanation:
Please mark me as the brainiest
what are three ways to add receipts to quick books on line receipt capture?
Answer:
1) Forward the receipt by email to a special receipt capture email
2) You can scan, or take a picture of the receipt and upload it using the QuickBooks mobile app.
3) You can also drag and drop the image, or upload it into QuickBooks Online receipt center.
Explanation:
1) Th first process is simply done using the email address
2) On the app, tap the Menu bar with icon ≡. Next, tap Receipt snap., and then
tap on the Receipt Camera. Yo can then snap a photo of your receipt, and tap on 'Use this photo.' Tap on done.
3) This method can be done by simply navigating on the company's website.
What is resource Management in Wireless Communication ? Explain its Advantages?
Answer:
Resource management is the system level transmission cellular networks and wireless communication.
Explanation:
Wireless communication is the process to continue to the address for faster response time,to the resource management.
Transmission is the provided by that more utilization and wireless resources available,and to discovered data.
Wireless communication system to demand the larger bandwidth and transmission using development to the system.
Wireless communication resources management the larger bandwidth and reliable transmission consumed all the system layer.
Resource management techniques tool are used in a preliminary concepts or mathematical tools,and average limited power battery.
Resource management are they necessary mathematical and fundamental tools are used in wireless communication.
Wireless communication in the provide that wireless industry in a wireless communication.
mplement the function fileSum. fileSum is passed in a name of a file. This function should open the file, sum all of the integers within this file, close the file, and then return the sum.If the file does not exist, this function should output an error message and then call the exit function to exit the program with an error value of 1.Please Use This Code Template To Answer the Question#include #include #include //needed for exit functionusing namespace std;// Place fileSum prototype (declaration) hereint main() {string filename;cout << "Enter the name of the input file: ";cin >> filename;cout << "Sum: " << fileSum(filename) << endl;return 0;}// Place fileSum implementation here
Answer:
Which sentence best matches the context of the word reticent as it is used in the following example?
We could talk about anything for hours. However, the moment I brought up dating, he was extremely reticent about his personal life.
Explanation:
Which sentence best matches the context of the word reticent as it is used in the following example?
We could talk about anything for hours. However, the moment I brought up dating, he was extremely reticent about his personal life.
What will be displayed after the following code executes? mystr = 'yes' yourstr = 'no' mystr += yourstr * 2 print(mystr)
Answer:
yesnono
Explanation:
mystr = 'yes'
yourstr = 'no'
mystr += yourstr * 2
mystr = "yes"yourstr * 2 = "no"+"no"yes + no+noyesnonoWhile the Internet can be a great resource, the information is not always reliable, as anyone can post information. Select one: True False
Answer: True
Explanation: Because anyone can post something and it can be non reliable
Which of the factors below is NOT a cause of online disinhibition?
O Anonymity
O Lack of nonverbal cues
Lack of tone of voice
Smartphones
Answer:
Lack of tone of voice
Explanation:
Remember, online disinhibition refers to the tendency of people to feel open in communication via the internet than on face to face conversations.
A lack of tone voice isn't categorized as a direct cause of online disinhibition because an individual can actually express himself using his tone of voice online. However, online disinhibition is caused by people's desire to be anonymous; their use of smartphones, and a lack of nonverbal cues.
what makes''emerging technologies'' happen and what impact will they have on individuals,society,and environment
Answer:
Please refer to the below for answer.
Explanation:
Emerging technology is a term given to the development of new technologies or improvement on existing technologies that are expected to be available in the nearest future.
Examples of emerging technologies includes but not limited to block chain, internet of things, robotics, cognitive science, artificial intelligence (AI) etc.
One of the reasons that makes emerging technology happen is the quest to improving on existing knowledge. People want to further advance their knowledge in terms of coming up with newest technologies that would make task faster and better and also address human issues. For instance, manufacturing companies make use of robotics,design, construction, and machines(robots) that perform simple repetitive tasks which ordinarily should be done by humans.
Other reasons that makes emerging technology happens are economic benefit, consumer demand and human needs, social betterment, the global community and response to social problems.
Impact that emerging technology will have on;
• Individuals. The positive effect of emerging technology is that it will create more free time for individuals in a family. Individuals can now stay connected, capture memories, access information through internet of things.
• Society. Emerging technology will enable people to have access to modern day health care services that would prevent, operate, train and improving medical conditions of people in the society.
• Environment. Before now, there have been global complains on pollution especially on vehicles and emission from industries. However, emerging technology will be addressing this negative impact of pollution from vehicles as cars that are currently being produced does not use petrol which causes pollution.
what makes ''emerging technologies'' happen is the necessity for it, the need for it in the society.
The impact they will have on individuals ,society,and environment is that it will improve areas of life such as communication, Transportation, Agriculture.
What is Emerging technologies?Emerging technologies can be regarded as the technologies in which their development as will as practical applications are not yet realized.
Learn more about Emerging technologies at:
https://brainly.com/question/25110079
which programming paradigm do programmers follow to write code for event driven applications? a. object oriented programming. b. functional c. nonprocedural. d. procedural
Answer:
D) Procedural
Explanation:
Answer:
Object-Oriented Programming
Explanation:
When you start your computer then which component works first?
A __________ infrastructure is made available to the general public or a large industrygroup and is owned by an organization selling cloud services.
a. community cloud
b. hybrid cloud
c. public cloud
d. private cloud
[tex]\Huge{\fbox{\red{Answer:}}}[/tex]
A public cloud infrastructure is made available to the general public or a large industrygroup and is owned by an organization selling cloud services.
[tex]<font color=orange>[/tex]
a. community cloud
b. hybrid cloud
c. public cloud ✔
d. private cloud
Review the given requirements using the checklist and discover possible problems with them. The following requirements are for a library system which is an interactive system providing access to a large document database and which allows the automated ordering and electronic delivery of documents to local and remote end-users. Some requirements for this system are: Req. 1 The user interface shall be html. Users shall access the system via standard web browsers such as Netscape and Internet Explorer. Req. 2 The system shall primarily an end-user system. Users shall use the system within the constraints of the permissions assigned by the administrator to identify, locate, order and receive documents. Req. 3 Users shall communicate with the system mainly via the html interface. Req. 4 User shall provide input to the system via the html interface. Req. 5 The system shall give output to the user via the html interface, email and print. The print output shall mainly be documents.
Answer:
Redundancy
Req. 1 and Req. 3 are seemed to say the same thing. We need to remove the first sentence in Req. 1
Conflict and understandability
Req. 1 states that access is through web browser while Req. 4 states that access is via html. We have to re-write the Req. 3 to make it clear that users do not actually have to write directly html to communicate with the system.
Completeness
Req. 5 states that print out will “mainly” be documents. What else might be printed? What other inputs will be produced?
Either remove mainly or clarify other print out.
What version of html or web browser is assumed in Req. 1 and Req. 3?
Explanation:
GIVING BRANLIEST IFFF CORRECT James uses a database to track his school football team. Which feature in a database allows James to list only the players that didn't play in the last game? Title Filter Search Sort
Answer:
filter
Explanation:
the filter feature allows him to fetch data that only meets a certain criteria(those who didn't play in the last game)
The FILTER feature in a database allows James to list on the players that did not play in the game.
What is the filter feature in EXCEL?The FILTER feature in Excel is used to clear out a number of statistics primarily based totally on the standards which you specify. The feature belongs to the class of Dynamic Arrays functions.
The end result is an array of values that mechanically spills into a number cells, beginning from the Cells wherein you input a formula.
Thus, The FILTER feature in a database allows James to list on the players that did not play in the game.
Learn more about FILTER feature here:
https://brainly.com/question/11866402
#SPJ2
A text file has been transferred from a Windows system to a Unix system, leaving it with the wrong line termination. This mistake can be corrected by
Answer:
Text to ASCII Transfer
Explanation:
Write an INSERT statement that adds this row to the Categories table:
CategoryName: Brass
Code the INSERT statement so SQL Server automatically generates the value for the CategoryID column.
Answer:
INSERT INTO categories (CategoryName)
VALUES ('Brass Code');
Explanation:
The SQL refers to the Structured Query Language in which the data is to be designed and maintained that occurred in the relational database management system i.e it is to be used for maintaining and query the database
Now the INSERT statement should be written as follows
INSERT INTO categories (CategoryName)
VALUES ('Brass Code');
when an object is passed as a non-reference pointer parametor to a method, modifiying the members of that object from
Answer:
"this" keyword representing the class object itself.
Explanation:
Object-oriented programming concept emphasizes on using blueprints representing the structure of a data collection type to continuously create an instance of that data structure. The instance of that object is called a class object. It is used in database management systems to populate the database.
Functions defined in the class objects are called methods and are used specifically by the class instance to modify the data content of the class object defined.
When a member of a class is referenced in the class, it can be accessed with the "this" keyword. At an instance of the class object, the variable holding the object should be called to get the class content because of the "this" keyword binding the instance of the object to the method.
In which type of hacking does the user block access from legitimate users without actually accessing the attacked system?
Complete Question:
In which type of hacking does the user block access from legitimate users without actually accessing the attacked system?
Group of answer choices
a. Denial of service
b. Web attack
c. Session hijacking
d. None of the above
Answer:
a. Denial of service
Explanation:
Denial of service (DOS) is a type of hacking in which the user (hacker) blocks access from legitimate users without actually accessing the attacked system.
It is a type of cyber attack in which the user (an attacker or hacker) makes a system or network inaccessible to the legitimate end users temporarily or indefinitely by flooding their system with unsolicited traffic and invalid authentication requests.
A denial of service is synonymous to a shop having a single entry point being crowded by a group of people seeking into entry into the shop, thereby preventing the legitimate customers (users) from exercising their franchise.
Under a DOS attack, the system or network gets stuck while trying to locate the invalid return address that sent the authentication requests, thus disrupting and closing the connection. Some examples of a denial of service attack are ping of death, smurf attack, email bomb, ping flood, etc.
Why operating system is pivotal in teaching and learning
Answer:
Without it learning and teaching cannot take place.
Explanation:
It is worthy to note that an operating system enables a computer install and run (lunch) computer programs. In a teaching environment that involves the use of computers, sending lessons to students; would mean that they have software programs that can successfully open this lessons.
In summary, an operating system is indeed pivotal in teaching and learning.
what are 3 important reasons to reconcile bank and credit card accounts at set dates?
Answer:
To verify transactions have the correct date assigned to them.
To verify that an account balance is within its credit limit.
To verify that all transactions have been recorded for the period.
Explanation:
Write a program that reads the input.txt file character by character and writes the content of the input file to output.txt with capitalize each word (it means upper case the first letter of a word and lowercase remaining letters of the word)
Answer:
def case_convertfile( file_name):
with open(" new_file","x") as file:
file.close( )
with open("file_name", "r") as txt_file:
while True:
word = txt_file.readline( )
word_split= word.split(" ")
for word in word_split:
upper_case = word.uppercase( )
file= open("new_file","w+")
file= open("new_file","a+")
file.write(upper_case)
txt_file.close( )
file.close( )
Explanation:
This python function would open an existing file with read privilege and a new file with write and append privileges read and capitalize the content of the old file and store it in the new file.
What command would you use to place the cursor in row 10 and column 15 on the screen or in a terminal window
Answer:
tput cup 10 15
Explanation:
tput is a command for command line environments in Linux distributions. tput can be used to manipulate color, text color, move the cursor and generally make the command line environment alot more readable and appealing to humans. The tput cup 10 15 is used to move the cursor 10 rows down and 15 characters right in the terminal
2- (8 point) Write a program using the instructions below. Assume that integers are stored in 4 bytes. a) Define an array of type int called apples with five elements, and initialize the elements to the even integers from 2 to 10. b) Define a pointer aPtr that points to a variable of type int. c) Print the elements of array values using a for statement. d) Write two separate statements that assign the starting address of the array to pointer variable aPtr. e) What physical address is aPtr pointing to? f) Print the elements of array values using pointer/offset notation. g) What address is referenced by aPtr + 3? What value is stored at that location? h) Assuming aPtr points to apples[4], what address is referenced by aPtr -= 4? What value is stored at that location?
Answer:
a)
int apples [5] = {2, 4, 6, 8, 10};
b)
int *aPtr //this is the pointer to int
Another way to attach a pointer to a an int variable that already exists:
int * aPtr;
int var;
aPtr = &var;
c)
for (int i = 0; i < size; i++){
cout << values[i] << endl; }
d)
aPtr = values;
aPtr = &values[0];
both the statements are equivalent
e)
If its referring to the part d) then the address is:
cout<<aPtr;
f)
for (int i = 0; i < size; ++i) {
cout<<*(vPtr + i)<<endl; }
g)
cout << (aPtr + 3) << endl; // address referenced by aPtr + 3
cout << *(aPtr + 3) << endl; // value stored at that location
This value stored at location is 8
h)
aPtr = &apples[4];
aPtr -= 4;
cout<<aPtr<<endl;
cout<<*aPtr<<endl;
Explanation:
a)
int apples [5] = {2, 4, 6, 8, 10};
In this statement the array names is apples, the size of the array is specified in square brackets. so the size is 5. The type of array apples is int this means it can store integer elements. The values or elements of the array apples are even integers from 2 to 10. So the elements of array are:
apples[0] = 2
apples[1] = 4
apples[2] = 6
apples[3] = 8
apples[4] = 10
b)
In this statement int *aPtr
The int* here is used to make the pointer aPtr points to integer object. Data type the pointer is pointing to is int. The asterisk symbol used with in makes this variable aPtr a pointer.
If there already exists an int type variable i.e. var and we want the pointer to point to that variable then declare an int type pointer aPtr and aPtr = &var; assigns the address of variable var to aPtr.
int * aPtr;
int var;
aPtr = &var;
c)
The complete program is:
int size= 5;
int values[size] = {2,4,6,8,10};
for (int i = 0; i < size; i++){
cout << values[i] << endl; }
The size of array is 5. The name of array is values. The elements of array are 2,4,6,8,10.
To print each element of the values array using array subscript notation, the variable i is initialized to 0, because array index starts at 0. The cout statement inside body of loop prints the element at 0-th index i.e. the first element of values array at first iteration. Then i is incremented by 1 each time the loop iterates, and this loop continues to execute until the value of i get greater of equal to the size i.e. 5 of values array.
The output is:
2
4
6
8
10
d)
aPtr = values;
This statement assigns the first element in values array to pointer aPtr. Here values is the address of the first element of the array.
aPtr = &values[0];
In this statement &values[0] is the starting address of the array values to which is assigned to aPtr. Note that the values[0] is the first element of the array values.
e)
Since &values[0] is the starting address of the array values to which is assigned to aPtr. So this address is the physical address of the starting of the array. If referring to the part d) then use this statement to print physical address is aPtr pointing to
cout<<aPtr;
This is basically the starting address of the array values to which is assigned to aPtr.
The output:
0x7fff697e1810
f)
i variable represents offset and corresponds directly to the array index.
name of the pointer i.e. vPtr references the array
So the statement (vPtr + i) means pointer vPtr that references to array values plus the offset i array index that is to be referenced. This statement gives the address of i-th element of values array. In order to get the value of the i-th element of values array, dereference operator * is used. It returns an ith value equivalent to the address the vPtr + i is pointing to. So the output is:
2
3
6
8
10
g)
values[0] is stored at 1002500
aPtr + 3 refers to values[3],
An integer is 4 bytes long,
So the address that is referenced by aPtr + 3 is
1002500 + 3 * 4 = 1002512
values[3] is basically the element of values array at 3rd index which is the 4th element of the array so the value stored at that referred location is 8.
h)
Given that aPtr points to apples[4], so the address stored in aPtr is
1002500 + 4 * 4 = 1002516
aPtr -= 4 is equivalent to aPtr = aPtr - 4
The above statement decrements aPtr by 4 elements of apples array, so the new value is:
1002516 - 4 * 4 = 1002500
This is the address of first element of apples array i.e 2.
Now
cout<<aPtr<<endl; statement prints the address referenced by aPtr -= 4 which is 1002500
cout<<*aPtr<<endl; statement prints the value is stored at that location which is 2.
A direct-mapped cache holds 64KB of useful data (not including tag or control bits). Assuming that the block size is 32-byte and the address is 32-bit, find the number of bits needed for tag, index, and byte select fields of the address.
Answer:
A) Number of bits for byte = 6 bits
B) number of bits for index = 17 bits
C) number of bits for tag = 15 bits
Explanation:
Given data :
cache size = 64 kB
block size = 32 -byte
block address = 32 -bit
number of blocks in cache memory
cache size / block size = 64 kb / 32 b = 2^11 hence the number of blocks in cache memory = 11 bits = block offset
A) Number of bits for byte
[tex]log _{2} (6)^2[/tex] = 6 bits
B) number of bits for index
block offset + byte number
= 11 + 6 = 17 bits
c ) number of bits for tag
= 32 - number of bits for index
= 32 - 17 = 15 bits
In which situation would it be appropriate to update the motherboard drivers to fix a problem with video?
Answer:
you may need to do this if you need to play video game that may need you to update drivers
it would be appropriate to update the motherboard drivers to fix a problem with video while playing video game.
What is motherboard?A motherboard is called as the main printed circuit board (PCB) in a computer or laptop. The motherboard is the backbone of processing in PCs.
All components and external peripherals connect through the motherboard.
Thus, the situation in which it is needed to update the motherboard drivers to fix a problem is while playing video game.
Learn more about motherboard.
https://brainly.com/question/15058737
#SPJ2
What will be assigned to the variable s_string after the following code executes? special = '1357 Country Ln.' s_string = special[ :4] Group of answer choices
Answer:
s_string = 1357
Explanation:
character: index
1: 0
3: 1
5: 2
7: 3
: 4
C: 5
o: 6
u: 7
n: 8
t: 9
r: 10
y: 11
: 12
L: 13
n: 14
. : 15
s_tring = special[:4]
s_tring = special[0] + special[1] + special[2] + special[3]
s_string = 1357
3. How many bytes of storage space would be required to store a 400-page novel in which each page contains 3500 characters if ASCII were used? How many bytes would be required if Unicode were used? Represent the answer in MB
Answer:
A total of 79.3mb will be needed