The 52-g arrow is launched so that it hits and embeds in a 1.50 kg block. The block hangs from strings. After the arrow joins the block, they swing up so that they are 0.47 m higher than the block's starting point. How fast was the arrow moving before it joined the block? What mechanical work must you do to lift a uniform log that is 3.1 m long and has a mass of 100 kg from the horizontal to a vertical position?

Answer:

the required solution is; x(t) = 0.675sin( 2.222t )

Explanation:

Given the data in the question;

Using both Newton's and Hooke's law;

m[tex]x^{ff[/tex] + k[tex]x[/tex] = 0, [tex]x[/tex](0) = 0, [tex]x^f[/tex](0) = 1.5

given that mass m = 9 kg

[tex]x[/tex] = 1.8 m

k is F / x

hence

k = F / x

given that, F = 80 N

we substitute

k = 80 / 1.8

k = 44.44

so

m[tex]x^{ff[/tex] + k[tex]x[/tex] = 0,

we input

9[tex]x^{ff[/tex] + 44.44[tex]x[/tex] = 0,

[tex]x^{ff[/tex] + 4.9377[tex]x[/tex] = 0

so auxiliary equation is,

r² + 4.9377 = 0

r² = -4.9377

r = √-4.9377

r = ±2.222i

hence, the solution will  be;

x(t) = A×cos( 2.222t ) + B×sin( 2.222t )

⇒ [tex]x^t[/tex](t) = -2.222Asin( 2.222t ) + 2.222Bcos( 2.222t )

using initial conditions

x(0) = 0

⇒ 0 = A

[tex]x^t[/tex](t) = 1.5

1.5 = 2.222B

so

B = 1.5 / 2.222 = 0.675

Hence, the required solution is; x(t) = 0.675sin( 2.222t )

Answer:

The ball moves from lowest to highest point:

W = M g h = 3 * 9.8 * 4 = 118 J

This is work done "against" gravity so work done by gravity is -118 J

The tension of the string does no work because the tension does not

move thru any distance   W = T * x = 0 because the length of the string is fixed.

Answer:

V = k Q / R       potential at distance R for a charge Q

R = k Q / V

R = 9 * 10E9 * 15 * 10E-9 / 30 = 9 * 15 / 30 = 4.5 m

Note: Our equation says that if R if infinite then V must be zero.

Answer:

thus the coulomb force is F – 8.19x10-8N. this is also an attractive force, although it is traditionally shown as positive since gravitational force is always attractive. the ratio of the magnitude of the electrostatic force to gravitational force in this case is,thus,FFG – 2.27x1039 F F G – 2.27x 10 39.

Answer:

The initial angular speed of the CD is equal to 14.73 rad/s.

Explanation:

Given that,

Angular displacement, [tex]\theta=12\ rad[/tex]

Final angular speed, [tex]\omega_f=17\ rad/s[/tex]

The acceleration of the CD,[tex]\alpha =3\ rad/s^2[/tex]

We need to find the initial angular speed of the CD. Using third equation of kinematics to find it such that,

[tex]\omega_f^2=\omega_i^2+2\alpha \theta\\\\\omega_i^2=\omega_f^2-2\alpha \theta[/tex]

Put all the values,

[tex]\omega_i^2=(17)^2-2\times 3\times 12\\\\\omega_i=\sqrt{217}\\\\\omega_i=14.73\ rad/s[/tex]

So, the initial angular speed of the CD is equal to 14.73 rad/s.

Answer:

Force = Mass × Acceleration

[tex]{ \tt{force = 2250 \times 4.3}} \\ = { \tt{9675 \: newtons}}[/tex]

Answer:

Explanation:

When a falcon is hovering, the force of up thrust is balanced by the weight.

When it begins to fall towards the ground, the weight acts downwards, kinetic friction is upwards, drag is upwards, normal force is upwards, thrust is upwards.

Answer:

[tex]T=3*10^-3 N/m[/tex]

Explanation:

From the question we are told that:

Radius :

[tex]R_1=4=>0.04\\\\R_2=6=>0.06[/tex]

Work [tex]W=1.5 * 10^{-4}[/tex]

Generally the equation for Work done  is mathematically given by

[tex]W=TdA[/tex]

Where

[tex]dA=A_2-A_1\\\\dA=(2 \pi r_2^2)(2 \pi r_1^2)[/tex]

[tex]dA=8 \pi*(r_2^2-r_1^2)\\\\dA=8*3.142*(0.06^2-0.04^2)[/tex]

[tex]dA=0.050m^2[/tex]

Therefore

[tex]W=TdA[/tex]

[tex]T=\frac{1.5 * 10^{-4}}{0.05m^2}[/tex]

[tex]T=3*10^-3 N/m[/tex]

Answer:

ωf = 8.8 rad/s

v = 2.2 m/s

Explanation:

We will use the third equation of motion to find the maximum angular velocity of the wheel:

[tex]2\alpha \theta = \omega_f^2 -\omega_I^2[/tex]

where,

α = angular acceleration = 6 rad/s²

θ = angular displacemnt = 1 rev = 2π rad

ωf = max. final angular velocity = ?

ωi = initial angular velocity = 1.5 rad/s

Therefore,

[tex]2(6\ rad/s^2)(2\pi\ rad)=\omega_f^2-(1.5\ rad/s)^2\\\omega_f^2=75.4\ rad/s^2+2.25\ rad/s^2\\\omega_f = \sqrt{77.65\ rad/s^2}[/tex]

ωf = 8.8 rad/s

Now, for linear velocity:

v = rω = (0.25 m)(8.8 rad/s)

v = 2.2 m/s

Answer:

Option D. ²²²₉₀Th

Explanation:

Let the unknown be ⁿₘZ. Thus, the equation becomes:

²²⁶₉₂U —> ⁴₂He + ⁿₘZ

Next, we shall determine n, m and Z. This can be obtained as follow:

For n:

226 = 4 + n

Collect like terms

226 – 4 = n

222 = n

n = 222

For m:

92 = 2 + m

Collect like terms

92 – 2 = m

90 = m

m = 90

For Z:

ⁿₘZ => ²²²₉₀Z => ²²²₉₀Th

Therefore, the complete equation becomes:

²²⁶₉₂U —> ⁴₂He + ⁿₘZ

²²⁶₉₂U —> ⁴₂He + ²²²₉₀Th

Thus, the unknown is ²²²₉₀Th

Answer:

1.Emitted primarily through the burning of fossil fuels (oil, natural gas, and coal), solid waste, and trees and wood products. Changes in land use also play a role. Deforestation and soil degradation add carbon dioxide to the atmosphere, while forest regrowth takes it out of the atmosphere.

2.Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

3.Untreated, heat exhaustion can lead to heatstroke, a life-threatening condition that occurs when your core body temperature reaches 104 F (40 C) or higher. Heatstroke requires immediate medical attention to prevent permanent damage to your brain and other vital organs that can result in death.

4.The loss of solar energy in passing through the atmospheric layers is called the atmospheric deflection. ... The longer the path traversed, the greater the amount of radiant energy depleted. Various processes whereby heat energy is lost through the atmosphere are known as scattering, diffusion, absorption, and reflection.

5.Geothermal energy is renewable because the Earth has retained a huge amount of the heat energy that was generated during formation of the planet. In addition, heat is continuously produced by decay of radioactive elements within the Earth. The amount of heat within the Earth, and the amount that is lost though natural processes (e.g. volcanic activity, conduction/radiation to the atmosphere), are much, much more than the amount of heat lost through geothermal energy production. At any one geothermal field, however, the temperature of the geothermal reservoir or the fluid levels/fluid pressure in the reservoir may decrease over time as fluids are produced and energy is extracted. Produced fluids can be re-injected to maintain pressures, although this may further cool down the reservoir if care is not taken. Over time, it is commonly necessary to drill additional wells in order to maintain energy production as temperatures and/or reservoir fluid pressures decline.

6.Floods, Floodplains, and Flood-Prone Areas. ... Flooding is a result of heavy or continuous rainfall exceeding the absorptive capacity of soil and the flow capacity of rivers, streams, and coastal areas. This causes a watercourse to overflow its banks onto adjacent lands.

The environmental concerns associated with the production of electricity are the release of greenhouse gases, the release of gases that cause acid rain, the release of excess heat, the flooding of land, and the depletion of geothermal energy so, option C is correct.

The presence or movement of charged particles is electricity. The movement of electrons through a circuit is known as an electric current. The accumulation of electrons on an insulator causes static electricity.

Mostly released when solid trash, trees, and wood products are burned, along with fossil fuels (coal, gas, and oil).

Land use changes also have an impact. Carbon dioxide is released into the atmosphere by deforestation and soil erosion, while it is removed from it by forest regeneration.

To know more about electricity:

https://brainly.com/question/29812640

#SPJ2

Answer:

[tex]\omega=109.67\ rad/s[/tex]

Explanation:

Given that,

The speed of the ball, u = 34 m/s

The ball is 0.310 m from the elbow joint.

We need to find the angular velocity (in rad/s) of the forearm.

We know that,

[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{34}{0.31}\\\\\omega=109.67\ rad/s[/tex]

So, the required angular velocity of the forearm is 109.67 rad/s.

Answer:

c). Easier setup

Explanation:

As per the question, 'easier setup' cannot be characterized as the advantage of using Access because it comprises of plenty of steps that must be followed in the sequential order to establishing a database or carrying transactions based on time. However, there are plenty of advantages of using Microsoft access like 'enhanced and increased storage of data,' 'hassle free database systems,' 'easy importing of data,' 'highly economical,' 'capability to allow multiple users,' 'extra features for reporting,' and much more. Hence, option c is the correct answer.

Complete Question

The barometer of a mountain hiker reads 980 mbars at the beginning of a hiking trip and 790 mbars at the end. Neglecting the effect of altitude on local gravitational acceleration, determine the vertical distance climbed. Assume an average air density of 1.20kg/m^2

Answer:

[tex]h=1614m[/tex]

Explanation:

From the question we are told that:

Initial Pressure [tex]P_1=980mbar=>98000Pa[/tex]

Final Pressure [tex]P_2=790mbar=>79000Pa[/tex]

Density [tex]\rho=1.20kg/m^2[/tex]

Generally the equation for Height climbed is mathematically given by

[tex]h=\frac{P_1-P_2}{\rho*g}[/tex]

[tex]h=\frac{P_1-P_2}{1.20*9.81}[/tex]

[tex]h=1614m[/tex]

Answer:

BFSkinner enfatizó la importancia de   creía en la importancia de desarrollar la psicología experimental y dejar atrás el psicoanálisis y las teorías acerca de la mente basadas en el simple sentido común.

Explanation:

Answer:

Mass, M = 1000 kg

Speed, v = 90 km/h = 25 m/s

time, t = 6 sec.

Distance:

[tex]{ \tt{distance = speed \times time }} \\ { \tt{distance = 25 \times 6}} \\ { \tt{distance = 150 \: m}}[/tex]

Force:

[tex]{ \tt{force = mass \times acceleration}} \\ { \bf{but \: for \: acceleration : }} \\ from \: second \: equation \: of \: motion : \\ { \bf{s = ut + \frac{1}{2} {at}^{2} }} \\ \\ { \tt{150 = (0 \times 6) + ( \frac{1}{2} \times a \times {6}^{2} ) }} \\ \\ { \tt{acceleration = 8.33 \: {ms}^{ - 2} }} \\ \\ { \tt{force = 1000 \times 8.33}} \\ { \tt{force = 8333.3 \: newtons}}[/tex]

Answer:

α = 1930.2 rad/s²

Explanation:

The angular acceleration can be found by using the third equation of motion:

[tex]2\alpha \theta=\omega_f^2-\omega_i^2[/tex]

where,

α = angular acceleration = ?

θ = angular displacement = (1500 rev)(2π rad/1 rev) = 9424.78 rad

ωf = final angular speed = 0 rad/s

ωi = initial angular speed = (960 rev/s)(2π rad/1 rev) = 6031.87 rad/s

Therefore,

[tex]2\alpha(9424.78\ rad) = (0\ rad/s)^2-(6031.87\ rad/s)^2\\\\\alpha = -\frac{(6031.87\ rad/s)^2}{(2)(9424.78\ rad)}[/tex]

α = - 1930.2 rad/s²

negative sign shows deceleration

Answer:

13.3 pounds.

Explanation:

For a spring of constant K, with an attached object of mass M, the period can be written as:

T = 2*π*√(M/K)

Where π = 3.14

First, we know that the period is 4 seconds, then we have:

4s = (2*π)*√(M/K)

We know that if the mass is reduced by 10lb, the period becomes 2s.

Then the new mass of the object will be: (M - 10lb)

Then the period equation becomes:

2s = (2*π)*√((M-10lb)/K)

So we have two equations:

4s = (2*π)*√(M/K)

2s = (2*π)*√((M-10lb)/K)

We want to solve this for M.

First, we need to isolate K in one of the equations.

Let's isolate K in the first one:

4s = (2*π)*√(M/K)

(4s/2*π) = √(M/K)

(2s/π)^2 = M/K

K = M/(2s/π)^2 = M*(π/2s)^2

Now we can replace it in the other equation.

2s = (2*π)*√((M-10lb)/K)

First, let's simplify the equation:

2s/(2*π) = √((M-10lb)/K)

1s/π =  √((M-10lb)/K)

(1s/π)^2 =  ((M-10lb)/K

K*(1s/π)^2 = M - 10lb

Now we can use the equation: K =  M*(π/2s)^2

then we get:

K*(1s/π)^2 = M - 10lb

(M*(π/2s)^2)*(1s/π)^2 = M - 10lb

M/4 = M - 10lb

10lb = M - M/4

10lb = (3/4)*M

10lb*(4/3) = M

13.3 lb = M

Answer:

True

Explanation:

This is because of the point where the forces are applied by our muscles and

the angle they have about the bones. Take for example the  diagram I uploaded.

If we do a free body diagram and a sum of torques, we would get that:

[tex]F_{muscle}sin \theta r1 - mg r2 = 0[/tex]

In this case, mg is the same in magnitude as the force made by the hand to hold the ball, so:

[tex]F_{muscle}sin \theta r_{1} - F_{hand} r_{2} = 0[/tex]

If we solve the equation for the force of the muscle we would get that:

[tex]F_{muscle}=\frac{F_{hand}r_{2}}{r_{1}sin \theta}[/tex]

Since r2 is greater than r1 and the sin function can only return values that are less than 1, this means that the force of the muscle is much greater than the force used by the hand to hold the weight.

Let's use some standard values to prove this, let's say that r1=10cm, r2=35cm and theta=60 degrees. When inputing the values into the equation we get:

[tex]F_{muscle}=\frac{F_{hand}(35cm)}{(10cm)sin (60^{o})}[/tex]

which yields:

[tex]F_{muscle}=4.04 F_{hand}[/tex]

so in this example, the force made by the muscle is 4 times as big as the force exerted by the hand.

[tex]4.4×10^{-7}\:\text{m}[/tex]

Explanation:

The minimum energy needed to kick out an electron from a metal's surface is when the energy of the incident radiation is equal to the metal's work function [tex]\phi[/tex]:

[tex]E = h\nu - \phi = \dfrac{hc}{\lambda} - \phi = 0[/tex]

or

[tex]\dfrac{hc}{\lambda} = \phi[/tex]

Solving for the wavelength [tex]\lambda[/tex],

[tex]\lambda = \dfrac{hc}{\phi}[/tex]

[tex]\:\:\:\:\:=\dfrac{(6.62×10^{-34}\:\text{J-s})(3.0×10^8\:\text{m/s})}{4.5×10^{-19}\:\text{J}}[/tex]

[tex]\:\:\:\:\:= 4.4×10^{-7}\:\text{m}[/tex]

Note that as the radiation's wavelength increases, its energy decreases. So a radiation whose wavelength is longer than this maximum will lose its ability to kick out an electron from this metal.

The maximum wavelength, in nm, of light that can eject an electron from the metal, given the data is 441.73 nm.

To find the wavelength, the given values are,

Energy (E) = 4.50×10¯¹⁹ J

The distance between two consecutive crests and troughs is called the wavelength of a wave.

Here, for the wavelength,

Energy (E) = 4.50×10¯¹⁹ J

Planck's constant (h) = 6.626×10¯³⁴ Js

Speed of light (v) = 3×10⁸ m/s

The wavelength of the light can be obtained as illustrated below:

E = hv / λ

Cross multiply λ,

E × λ = hv

Divide both sides by E,

λ = hv / E

Substituting all the values,

λ = (6.626×10¯³⁴ × 3×10⁸) / 4.50×10¯¹⁹

λ = 0.000000441733 m

λ = 441.73nm

λ - The maximum wavelength of light.

Thus, the wavelength of the light that can eject an electron from the metal is 441.73 nm

Learn more about wavelength,

https://brainly.com/question/13047641

#SPJ2

Answer:

a) The energy efficiency of the out-of-condition professor is 9.082 %.

b) The food calories needed by the well-conditioned athlete is 181.644 kilocalories.

Explanation:

a) The energy efficiency of the food metabolization ([tex]\eta[/tex]), no unit, is defined by following formula:

[tex]\eta = \frac{W}{E}\times 100\,\%[/tex] (1)

Where:

[tex]W[/tex] - Useful work, in joules.

[tex]E[/tex] - Food energy, in joules.

If we know that [tex]W = 1.90\times 10^{5}\,J[/tex] and [tex]E = 2.092\times 10^{6}\,J[/tex], the energy efficiency of the food metabolization is:

[tex]\eta = \frac{1.90\times 10^{5}\,J}{2.092\times 10^{6}\,J} \times 100\,\%[/tex]

[tex]\eta = 9.082\,\%[/tex]

The energy efficiency of the out-of-condition professor is 9.082 %.

b) If we know that [tex]W = 1.90\times 10^{5}\,J[/tex] and [tex]\eta = 25\,\%[/tex], then the quantity of food energy is:

[tex]E = \frac{W}{\eta}\times 100\,\%[/tex]

[tex]E = 1.90\times 10^{5}\,J\times \frac{100\,\%}{25\,\%}[/tex]

[tex]E = 7.60\times 10^{5}\,J[/tex]

[tex]E = 181.644\,kcal[/tex]

The food calories needed by the well-conditioned athlete is 181.644 kilocalories.

Answer:

b. approaches zero.

Explanation:

The phenomenon is known as length contraction.

Length contraction is a result of Einstein's special theory of relativity. This theory states that an observer in an inertial frame of reference will observe a decrease in the length of any moving object placed at another inertial frame of reference.

let the length of the train = L

Let the length observed when the train is in motion = L₀

Apply Einstein's special theory of relativity;

[tex]L_0 = L \times \sqrt{1 - \frac{v^2}{c^2} } \\\\where;\\\\v \ is \ the \ velocity \ of \ the \ train\\\\c \ is \ the \ speed \ of \ light\\\\[/tex]

from the equation above, when v = 0, the length observed is equal to the initial length of the train. (L₀ = L)

As the velocity of the train (v) approaches the speed of light (c), the length of the train observed (L₀) becomes smaller than the initial length of the train (L).  (L₀ < L)

Eventually, when v equals c, we will have a square root of zero (0), and the length observed will become zero.  (L₀ = 0)

Thus, the length of this object, as measured by a stationary observer approaches zero

I guess that we want to find how much money you get each week.

We know that the job pays $8.60 per hour.

We know that you work 20 hours per week.

Then the gross pay (the total money that you earn) in a week is 20 times $8.60, or:

20*$8.60 = $172.

Now we know that your employer witholds:

10% + 7.65% + 5% = 22.65%

Then your employer withholds 22.65% of your gross pay.

if the 100% of your gross pay is $172

Then the 22.65% will be:

(22.65%/100%)*$172 = 0.2265*$172 = $38.96

This means that your employer withholds $38.96 of your weekly gross pay.

Then each week you get:

$172 - $38.96 = $133.04

If you want to learn more, you can read:

https://brainly.com/question/6692050

The height of the motorcycle daredevil when it reaches the landing ramp is 4.93 m.

Since the ramp is a 33.0° ramp and the motorcycle daredevil jumps off with a speed of 20.3 m/s, the motorcycle dare devil has a horizontal component of speed u = 20.3cos33.0° m/s and a vertical component of speed v = 20.3sin33.0° m/s.

Now, since the other ramp is d = 28.0 m away, it takes the time it takes the motorcycle dare devil to reach it is t.

Considering motion in the horizontal direction, d = ut.

Thus, t = d/u

= 28.0 m/20.3cos33.0° m/s

= 28.0 m/(20.3 × 0.8387) m/s

= 28.0 m/17.025 m/s

= 1.645 s

Let h be the height of the motorcycle daredevil when it reaches the landing ramp in time, t.

Considering the vertical motion and using h = vt - 1/2gt² where v = vertical velocity of motorcycle daredevil = 20.3sin33.0°, t = time taken to reach landing ramp = 1.645 s and g = acceleration due to gravity = 9.8 m/s² (Note that there is a negative in front of g since it is directed downwards)

So, substituting the values of the variables into the equation, we have

h = vt - 1/2gt²

h = 20.3sin33.0° m/s × 1.645 s - 1/2 × 9.8 m/s² × (1.645 s)²  

h = 20.3 × 0.5446 m/s × 1.645 s - 1/2 × 9.8 m/s² × 2.706025 s²

h = 18.187 m - 1/2 × 26.519 m

h = 18.187 m - 13.26 m

h = 4.927

h ≅ 4.93 m

So, the height of the motorcycle daredevil when it reaches the landing ramp is 4.93 m.

Learn more about ramps here:

https://brainly.com/question/20113308

Answer:

49 N

Explanation:

Given,

Mass ( m ) = 50 kg

To find : Weight ( W ) = ?

Take the value of acceleration due to gravity as 9.8 m/s^2

Formula : -

W = mg

W = 50 x 9.8

W = 49 N

Answer:

log T = 3.72 to 3.77

Explanation:

Temperature range is

T = 5200 to 5900

Take the log

So,

log T = log 5200 to log 5900

log T = 3.72 to 3.77

Answer:

kinetic and static

Explanation:

hope it helps! ^w^

Answer:

Resistance, R = 0.02 Ohms

Explanation:

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

V = IR

Where;

V is the voltage or potential difference.

I is the current.

R is the resistance.

From the attachment, we would pick the following values on the graph of current against voltage;

Voltage, V = 0.5 V

Current = 25 A

To find resistance;

R = V/I

R = 0.5/2.5

Resistance, R = 0.02 Ohms

Note:

Resistance (R) is the inverse of slope i.e change in current with respect to change in voltage.