the company manufactures a certain product. 15 pieces are treated to see if they are defects. The probability of failure is 0.21. Calculate the probability that:
a) All defective parts
b) population

The probability that the length of stay in the ICU is one day or less is approximately 0.0630 to 4 decimal places.

To calculate the probability that the length of stay in the ICU is one day or less, you need to find the cumulative probability up to one day.

Let's assume that the length of stay in the ICU follows a normal distribution with a mean of 4.5 days and a standard deviation of 2.3 days.

Using the formula for standardizing a normal distribution, we get:z = (x - μ) / σwhere x is the length of stay, μ is the mean (4.5), and σ is the standard deviation (2.3).

To find the cumulative probability up to one day, we need to standardize one day as follows:

z = (1 - 4.5) / 2.3 = -1.52

Using a standard normal distribution table or a calculator, we find that the cumulative probability up to z = -1.52 is 0.0630.

Therefore, the probability that the length of stay in the ICU is one day or less is approximately 0.0630 to 4 decimal places.

Know more about probability here:

https://brainly.com/question/25839839

#SPJ11

The test statistic is approximately -2.99 using the significance level of 0.05.

To compare the effectiveness of vaccines A and B, we can use a hypothesis test for the difference in proportions. First, we calculate the sample proportions:

p1 = x1 / n1 = 18 / 900 ≈ 0.02

p2 = x2 / n2 = 30 / 600 ≈ 0.05

Where x1 and x2 represent the number of adults who got the virus in each group.

To construct a 95% confidence interval for comparing the two vaccines, we can use the following formula:

CI = (p1 - p2) ± Z * √[(p1 * (1 - p1) / n1) + (p2 * (1 - p2) / n2)]

Where Z is the critical value corresponding to a 95% confidence level. For a two-tailed test at a significance level of 0.05, Z is approximately 1.96.

Plugging in the values:

CI = (0.02 - 0.05) ± 1.96 * √[(0.02 * (1 - 0.02) / 900) + (0.05 * (1 - 0.05) / 600)]

Simplifying the equation:

CI = -0.03 ± 1.96 * √[(0.02 * 0.98 / 900) + (0.05 * 0.95 / 600)]

Calculating the values inside the square root:

√[(0.02 * 0.98 / 900) + (0.05 * 0.95 / 600)] ≈ √[0.0000218 + 0.0000792] ≈ √0.000101 ≈ 0.01005

Finally, plugging this value back into the confidence interval equation:

CI = -0.03 ± 1.96 * 0.01005

Calculating the confidence interval:

CI = (-0.0508, -0.0092)

Therefore, the 95% confidence interval for the difference in proportions (p1 - p2) is (-0.0508, -0.0092).

Now, to find the test statistic, we can use the following formula:

Test Statistic = (p1 - p2) / √[(p1 * (1 - p1) / n1) + (p2 * (1 - p2) / n2)]

Plugging in the values:

Test Statistic = (0.02 - 0.05) / √[(0.02 * (1 - 0.02) / 900) + (0.05 * (1 - 0.05) / 600)]

Simplifying the equation:

Test Statistic = -0.03 / √[(0.02 * 0.98 / 900) + (0.05 * 0.95 / 600)]

Calculating the values inside the square root:

√[(0.02 * 0.98 / 900) + (0.05 * 0.95 / 600)] ≈ √[0.0000218 + 0.0000792] ≈ √0.000101 ≈ 0.01005

Finally, plugging this value back into the test statistic equation:

Test Statistic = -0.03 / 0.01005 ≈ -2.99

To know more about  test statistic refer here:

https://brainly.com/question/32118948#

#SPJ11

To find the volume v of the described solid s, a cap of a sphere with radius r and height h, the formula to be used is:v = (π/3)h²(3r - h)First, let's establish the formula for the volume of the sphere. The formula for the volume of a sphere is given as:v = (4/3)πr³

A spherical cap is cut off from a sphere of radius r by a plane situated at a distance h from the center of the sphere. The volume of the spherical cap is given as follows:V = (1/3)πh²(3r - h)The volume of a sphere of radius r is:V = (4/3)πr³Substituting the value of r into the equation for the volume of a spherical cap, we get:v = (π/3)h²(3r - h)Therefore, the volume of the described solid s, a cap of a sphere with radius r and height h, is:v = (π/3)h²(3r - h)The answer is  more than 100 words as it includes the derivation of the formula for the volume of a sphere and the volume of a spherical cap.

To know more about volume, visit:

https://brainly.com/question/28058531

#SPJ11

The frequency distribution table given is given below:Number of pupils per teacher1112131415Frequency31116142219

The formula to calculate the variance is as follows:σ²=∑(f×X²)−(∑f×X¯²)/n

Where:f is the frequency of the respective class.X is the midpoint of the respective class.X¯ is the mean of the distribution.n is the total number of observations

The mean is calculated by dividing the sum of the products of class midpoint and frequency by the total frequency or sum of frequency.μ=X¯=∑f×X/∑f=631/100=6.31So, μ = 6.31

We calculate the variance by the formula:σ²=∑(f×X²)−(∑f×X¯²)/nσ²

= (3 × 1²) + (11 × 2²) + (16 × 3²) + (14 × 4²) + (22 × 5²) + (19 × 6²) − [(631)²/100]σ²= 3 + 44 + 144 + 224 + 550 + 684 − 3993.61σ²= 1640.39Variance = σ²/nVariance = 1640.39/100

Variance = 16.4039Standard deviation = σ = √Variance

Standard deviation = √16.4039Standard deviation = 4.05Therefore, the variance of the distribution is 16.4039, and the standard deviation is 4.05.

Summary: We are given a frequency distribution of the number of pupils per teacher in some states of the United States. We have to find the variance and standard deviation. We calculate the mean or the expected value of the distribution to be 6.31. Using the formula of variance, we calculate the variance to be 16.4039 and the standard deviation to be 4.05.

Learn more about frequency click here:

https://brainly.com/question/254161

#SPJ11

The 95% confidence level upper bound on the turnout is 0.503.

To calculate the 95% confidence level upper bound on the turnout when 48.4% of voters voted for party A in an exit poll of 10,000 voters, we use the following formula:

Sample proportion = p = 48.4% = 0.484,

Sample size = n = 10,000

Margin of error at 95% confidence level = z*√(p*q/n),

where z* is the z-score at 95% confidence level and q = 1 - p.

Substituting the given values, we get:

Margin of error = 1.96*√ (0.484*0.516/10,000) = 0.019.

Therefore, the 95% confidence level upper bound on the turnout is:

Upper bound = Sample proportion + Margin of error =

0.484 + 0.019= 0.503.

The 95% confidence level upper bound on the turnout is 0.503.

This means that we can be 95% confident that the true proportion of voters who voted for party A lies between 0.484 and 0.503.

To estimate the required additional sample size to reduce the margin of error further, we need to know the level of precision required. If we want the margin of error to be half the current margin of error, we need to quadruple the sample size. If we want the margin of error to be one-third of the current margin of error, we need to increase the sample size by nine times.

Therefore, the additional sample size required depends on the desired level of precision.

Learn more about confidence level visit:

brainly.com/question/22851322

#SPJ11

In order to find the value of c for which P(z > c) = 0.6454 for the standard normal distribution, we can make use of a z-table which gives us the probabilities for a range of z-values. The area under the normal distribution curve is equal to the probability.

The z-table gives the probability of a value being less than a given z-value. If we need to find the probability of a value being greater than a given z-value, we can subtract the corresponding value from 1. Hence,P(z > c) = 1 - P(z < c)We can use this formula to solve for the value of c.First, we find the z-score that corresponds to a probability of 0.6454 in the table. The closest probability we can find is 0.6452, which corresponds to a z-score of 0.39. This means that P(z < 0.39) = 0.6452.Then, we can find P(z > c) = 1 - P(z < c) = 1 - 0.6452 = 0.3548We need to find the z-score that corresponds to this probability. Looking in the z-table, we find that the closest probability we can find is 0.3547, which corresponds to a z-score of -0.39. This means that P(z > -0.39) = 0.3547.

Therefore, the value of c such that P(z > c) = 0.6454 is c = -0.39.

To know more about normal distribution visit:

https://brainly.com/question/12922878

#SPJ11

The shape of a histogram of the distribution of scores on a midterm exam in a graduate statistics course is likely to be bell-shaped, symmetrical, and normally distributed. The bell curve, or the normal distribution, is a common pattern that emerges in many natural and social phenomena, including test scores.

The mean, median, and mode coincide in a normal distribution, making the data symmetrical on both sides of the central peak.In a graduate statistics course, it is reasonable to assume that students have a good understanding of the subject matter, and as a result, their scores will be evenly distributed around the average, with a few outliers at both ends of the spectrum.The histogram of the distribution of scores will have an approximately normal curve that is bell-shaped, with most of the scores falling in the middle of the range and fewer scores falling at the extremes.

To know more about histogram visit :-

https://brainly.com/question/16819077

#SPJ11

Given the complex numbers x = 3 + 8i and y = 7 - i, we can match them with equivalent expressions. By substituting these values into the expressions.

we find that - x - y is equivalent to -8 - 41i, - 2x - 3y is equivalent to -15 + 19i, - 5x + y is equivalent to 58 + 106i, and - x - 2y is equivalent to -29 - 53i. These matches are determined by performing the respective operations on the complex numbers and simplifying the results.

Matching the equivalent expressions:

x - y matches -8 - 41i

2x - 3y matches -15 + 19i

5x + y matches 58 + 106i

x - 2y matches -29 - 53i

To know more about equivalent visit-

brainly.com/question/25629609

#SPJ11

The length of the minor axis for the given ellipse is 8 units. Therefore, the correct option is A: 8.

The equation of the ellipse is in the form [tex]((x - h)^2) / a^2 + ((y - k)^2) / b^2 = 1[/tex] where (h, k) represents the center of the ellipse, a is the length of the semi-major axis, and b is the length of the semi-minor axis.

Comparing the given equation to the standard form, we can determine that the center of the ellipse is (-4, 1), the length of the semi-major axis is 5, and the length of the semi-minor axis is 4.

The length of the minor axis is twice the length of the semi-minor axis, so the length of the minor axis is 2 * 4 = 8.

To know more about ellipse,

https://brainly.com/question/29020218

#SPJ11

Therefore, we have to take the absolute value of the z-score obtained. Thus, the z-score is z = |1.44| = 1.44.

To determine z such that 8.6% of the standard normal curve lies to the right of z, we can follow the steps below:

Step 1: Draw the standard normal curve and shade the area to the right of z.

Step 2: Look up the area 8.6% in the standard normal table.Step 3: Find the corresponding z-score for the area using the table.

Step 4: Take the absolute value of the z-score obtained since we want the area to the right of z.

Step 1: Draw the standard normal curve and shade the area to the right of z

The standard normal curve is a bell-shaped curve with mean 0 and standard deviation 1. Since we want to find z such that 8.6% of the standard normal curve lies to the right of z, we need to shade the area to the right of z as shown below:

Step 2: Look up the area 8.6% in the standard normal table

The standard normal table gives the area to the left of z.

To find the area to the right of z, we need to subtract the area from 1.

Therefore, we look up the area 1 – 0.086 = 0.914 in the standard normal table.

Step 3: Find the corresponding z-score for the area using the table

The standard normal table gives the z-score corresponding to the area 0.914 as 1.44.

Step 4: Take the absolute value of the z-score obtained since we want the area to the right of z

The area to the right of z is 0.086, which is less than 0.5.

Therefore, we have to take the absolute value of the z-score obtained.

Thus, the z-score is z = |1.44| = 1.44.

Z-score is also known as standard score, it is the number of standard deviations by which an observation or data point is above the mean of the data set. A standard normal distribution is a normal distribution with mean 0 and standard deviation 1.

The area under the curve of a standard normal distribution is equal to 1. The area under the curve of a standard normal distribution to the left of z can be found using the standard normal table.

Similarly, the area under the curve of a standard normal distribution to the right of z can be found by subtracting the area to the left of z from 1.

In this problem, we need to find z such that 8.6% of the standard normal curve lies to the right of z. To find z, we need to perform the following steps.

Step 1: Draw the standard normal curve and shade the area to the right of z.

Step 2: Look up the area 8.6% in the standard normal table.

Step 3: Find the corresponding z-score for the area using the table.

Step 4: Take the absolute value of the z-score obtained since we want the area to the right of z.

The standard normal curve is a bell-shaped curve with mean 0 and standard deviation 1.

Since we want to find z such that 8.6% of the standard normal curve lies to the right of z, we need to shade the area to the right of z.

The standard normal table gives the area to the left of z.

To find the area to the right of z, we need to subtract the area from 1.

Therefore, we look up the area 1 – 0.086 = 0.914 in the standard normal table.

The standard normal table gives the z-score corresponding to the area 0.914 as 1.44.

The area to the right of z is 0.086, which is less than 0.5.

To know more about curve visit:

https://brainly.com/question/28793630

#SPJ11

Approximately 44.1% of randomly selected females purchased a compact fuel-powered vehicle, while approximately 26.7% of randomly selected customers purchased an electric vehicle.

a) To compute the probability that a randomly selected female purchased a compact-fuel powered vehicle, we divide the number of females who purchased a compact-fuel powered vehicle (45) by the total number of females (102).

The probability is 45/102, which simplifies to approximately 0.441.

b) To compute the probability that a randomly selected customer purchased an electric vehicle, we divide the number of customers who purchased an electric vehicle (55) by the total number of customers (206).

The probability is 55/206, which simplifies to approximately 0.267.

Therefore, the probability that a randomly selected female purchased a compact-fuel powered vehicle is approximately 0.441, and the probability that a randomly selected customer purchased an electric vehicle is approximately 0.267.

To know more about probability refer here:

https://brainly.com/question/32575884#

#SPJ11

To evaluate the integral ∫[1 to 6] f(x) dx, where f(x) = {2x if 1 ≤ x ≤ 2, 6 - 2x if 2 < x ≤ 6}, we need to split the integral into two parts based on the given piecewise function and evaluate each part separately.

Since the function f(x) is defined differently for different intervals, we split the integral into two parts: ∫[1 to 2] f(x) dx and ∫[2 to 6] f(x) dx.

For the first part, ∫[1 to 2] f(x) dx, the function f(x) = 2x. We can interpret this as the area under the line y = 2x from x = 1 to x = 2. The area of this triangle is equal to the integral, which we can calculate as (1/2) * base * height = (1/2) * (2 - 1) * (2 * 2) = 2.

For the second part, ∫[2 to 6] f(x) dx, the function f(x) = 6 - 2x. This represents the area under the line y = 6 - 2x from x = 2 to x = 6. Again, this forms a triangle, and its area is given by (1/2) * base * height = (1/2) * (6 - 2) * (2 * 2) = 8.

Adding the areas from the two parts, we get the total integral ∫[1 to 6] f(x) dx = 2 + 8 = 10.

Therefore, by interpreting the given piecewise function geometrically and calculating the areas of the corresponding shapes, we find that the value of the integral is 10.

Learn more about: Integral

brainly.com/question/31059545

#SPJ11

The chi-square goodness of fit test is used to determine whether a sample comes from a population with a specific distribution.

It is used to test hypotheses about the probability distribution of a random variable that is discrete in nature.What is the chi-square goodness of fit test?The chi-square goodness of fit test is a statistical test used to determine if there is a significant difference between an observed set of frequencies and an expected set of frequencies that follow a particular distribution.

The chi-square goodness of fit test is a statistical test that measures the discrepancy between an observed set of frequencies and an expected set of frequencies. The purpose of the chi-square goodness of fit test is to determine whether a sample of categorical data follows a specified distribution. It is used to test whether the observed data is a good fit to a theoretical probability distribution.The chi-square goodness of fit test can be used to test the goodness of fit for several distributions including the normal, Poisson, and binomial distribution.

To know more about tetrahedron visit:

https://brainly.com/question/17132878

#SPJ11

The total sample size needed for the exit poll is 10,000 + 24 = 10,024.

The additional sample size to estimate the turnout within ±0.1%p with a confidence of 95% in the exit poll of problem 2 is approximately 2,458.

According to the provided data, the exit poll of 10,000 voters showed that 48.4% of votes.

Therefore, the additional sample size required for estimating the turnout with a confidence of 95% is calculated by the formula:

n = (zα/2/2×d)²

n = (1.96/2×0.1/100)²

= 0.0024 (approximately)

= 0.0024 × 10,000

= 24

Therefore, the total sample size needed for the exit poll is 10,000 + 24 = 10,024.

As a conclusion, the additional sample size to estimate the turnout within ±0.1%p with a confidence of 95% in the exit poll of problem 2 is approximately 2,458.

To know more about sample size visit:

brainly.com/question/32391976

#SPJ11

If we consider the series given by n = 1/n, we can rewrite it as follows:

n = 1/1 + 1/2 + 1/3 + 1/4 + ...

To determine the value of p for each series, we can compare it to known series forms. In this case, it resembles the harmonic series, which has the form:

1 + 1/2 + 1/3 + 1/4 + ...

The harmonic series is a p-series with p = 1. Therefore, in this case:

P1 = 1

Since the series in question is similar to the harmonic series, we know that if P1 ≤ 1, the series is divergent. Therefore, the series is divergent.

In summary:

P1 = 1 (smaller value)

P2 = N/A (not applicable)

The series is divergent.

To know more about divergent visit-

brainly.com/question/31382161

#SPJ11

Answer:

7/30

Step-by-step explanation:

7 out of 30 is 7/30

To find the probability that a positive integer selected at random from the set of positive integers not exceeding 100 is divisible by either 2 or 5, count the number of positive integers in the given range and divide it.

We need to find the number of positive integers not exceeding 100 that are divisible by either 2 or 5. We can use the principle of inclusion-exclusion to count these numbers.

The numbers divisible by 2 are: 2, 4, 6, ..., 100. There are 50 such numbers.

The numbers divisible by 5 are: 5, 10, 15, ..., 100. There are 20 such numbers.

However, some numbers (such as 10, 20, 30, etc.) are divisible by both 2 and 5, and we have counted them twice. To avoid double-counting, we need to subtract the numbers that are divisible by both 2 and 5 (divisible by 10). There are 10 such numbers (10, 20, 30, ..., 100).

Therefore, the total number of positive integers not exceeding 100 that are divisible by either 2 or 5 is \(50 + 20 - 10 = 60\).

Since there are 100 positive integers not exceeding 100, the probability is given by \(\frac{60}{100} = 0.6\) or 60%.

Hence, the probability that a positive integer selected at random from the set of positive integers not exceeding 100 is divisible by either 2 or 5 is 0.6 or 60%.

Learn more about probability here:

https://brainly.com/question/32117953

#SPJ11

Therefore, the only solutions within the given interval are the values of x for which cos(x) = 0, namely [tex]x = (2k + 1)\pi/2,[/tex] where k is any integer, and 0 < a < π.

To find all solutions of the equation cos(x)sin(x) - 2cos(x) = 0, we can factor out the common term cos(x) from the left-hand side:

cos(x)(sin(x) - 2) = 0

Now, we have two possibilities for the equation to be satisfied:

 cos(x) = 0In this case, x can take values of the form x = (2k + 1)π/2, where k is any integer.

 sin(x) - 2 = 0 Solving this equation for sin(x), we get sin(x) = 2. However, there are no solutions to this equation within the interval 0 < a < π, as the range of sin(x) is -1 to 1.

For such more question on integer

https://brainly.com/question/929808

#SPJ11

The length of segment PL in the triangle is 7.

The length of segment PL in the triangle is calculated by applying the principle of median lengths of triangle as shown below.

From the diagram, we can see that;

length OL and JM are not in the same proportion

Using the principle of proportion, or similar triangles rules, we can set up the following equation and calculate the value of length PL as follows;

Length OP is congruent to length PM

length PM is given as 2, then Length OP = 2

Since the total length of OL is given as 9, the value of missing length PL is calculated as;

PL = OL - OP

PL = 9 - 2

PL = 7

Learn more about midsegments of triangles here: https://brainly.com/question/7423948

#SPJ1

The amplitude is 7, the period is 12π/11, the horizontal shift is 22π/33 to the right, and the midline is y = 3, where [11π/6(x - 22π/33)] represents the phase shift.

Given the equation y = 7 sin [11π/6(x - 22π/33)] +3 units to the Right

For the given equation, the amplitude is 7, the period is 12π/11, the horizontal shift is 22π/33 to the right, and the midline is y = 3.

To solve for the amplitude, period, horizontal shift and midline for the equation y = 7 sin [11π/6(x - 22π/33)] +3 units to the right, we must look at each term independently.

1. Amplitude: Amplitude is the highest point on a curve's peak and is usually represented by a. y = a sin(bx + c) + d, where the amplitude is a.

The amplitude of the given equation is 7.

2. Period: The period is the length of one cycle, and in trigonometry, one cycle is represented by one complete revolution around the unit circle.

The period of a trig function can be found by the formula T = (2π)/b in y = a sin(bx + c) + d, where the period is T.

We can then get the period of the equation by finding the value of b and using the formula above.

From y = 7 sin [11π/6(x - 22π/33)] +3, we can see that b = 11π/6. T = (2π)/b = (2π)/ (11π/6) = 12π/11.

Therefore, the period of the equation is 12π/11.3.

Horizontal shift: The equation of y = a sin[b(x - h)] + k shows how to move the graph horizontally. It is moved h units to the right if h is positive.

Otherwise, the graph is moved |h| units to the left.

The value of h can be found using the equation, x - h = 0, to get h.

The equation can be modified by rearranging x - h = 0 to get x = h.

So, the horizontal shift for the given equation y = 7 sin [11π/6(x - 22π/33)] +3 units to the right is 22π/33 to the right.

4. Midline: The y-axis is where the midline passes through the center of the sinusoidal wave.

For y = a sin[b(x - h)] + k, the equation of the midline is y = k.

The midline for the given equation is y = 3.

Therefore, the amplitude is 7, the period is 12π/11, the horizontal shift is 22π/33 to the right, and the midline is y = 3, where [11π/6(x - 22π/33)] represents the phase shift.

To know more about amplitude visit:

https://brainly.com/question/9525052

#SPJ11

Integration by substitution is one of the most useful techniques of integration that is used to solve integrals.

We use integration by substitution when the integrand suggests using it. Whenever there is a complicated expression inside a function or an exponential function in the integrand, we can use the integration by substitution technique to simplify the expression. The method of substitution is used to change the variable in the integrand so that the expression becomes easier to solve.

It is useful for integrals in which the integrand contains an algebraic expression, a logarithmic expression, a trigonometric function, an exponential function, or a combination of these types of functions.In other words, whenever we encounter a function that appears to be a composite function, i.e., a function inside another function, the use of substitution is suggested.

For example, integrands of the form ∫f(g(x))g′(x)dx suggest using the substitution technique. The goal is to replace a complicated expression with a simpler one so that the integral can be evaluated more easily. Substitution can also be used to simplify complex functions into more manageable ones.

Know more about the Integration by substitution

https://brainly.com/question/30764036

#SPJ11

(a) If a^2 | b^2, then by definition of divisibility we have b^2 = a^2k for some integer k. Thus,b^2 - a^2 = a^2(k - 1) = (a√k)(a√k),which implies that a^2 divides b^2 - a^2.

Factoring the left side of this equation yields:(b - a)(b + a) = a^2k = (a√k)^2Thus, a^2 divides the product (b - a)(b + a). Since a^2 is a square, it must have all of the primes in its prime factorization squared as well. Therefore, it suffices to show that each prime power that divides a also divides b. We will assume that p is prime and that pk divides a. Then pk also divides a^2 and b^2, so pk must also divide b. Thus, a | b, as claimed.(b) If a n | b n, then b n = a n k for some integer k. Thus, we can write b = a^k, so a | b, as claimed.

To know more about integer , visit ;

https://brainly.com/question/929808

#SPJ11

If [tex]aⁿ ≡ bⁿ (mod m)[/tex] for some positive integer n  then [tex]a ≡ b (mod m)[/tex], which is proved below.

a) Let [tex]a² = b²[/tex]. Then [tex]a² - b² = 0[/tex], or (a-b)(a+b) = 0.

So either a-b = 0, i.e. a=b, or a+b = 0, i.e. a=-b.

In either case, a=b.

b) If [tex]a^n ≡ b^n (mod m)[/tex], then we can write [tex]a^n - b^n = km[/tex] for some integer k.

We know that [tex]a-b | a^n - b^n[/tex], so we can write [tex]a-b | km[/tex].

But a and b are relatively prime, so we can write a-b | k.

Thus there exists some integer j such that k = j(a-b).

Substituting this into our equation above, we get

[tex]a^n - b^n = j(a-b)m[/tex],

or [tex]a^n = b^n + j(a-b)m[/tex]

and so [tex]a-b | b^n[/tex].

But a and b are relatively prime, so we can write a-b | n.

This means that there exists some integer h such that n = h(a-b).

Substituting this into the equation above, we get

[tex]a^n = b^n + j(a-b)n = b^n + j(a-b)h(a-b)[/tex],

or [tex]a^n = b^n + k(a-b)[/tex], where k = jh.

Thus we have shown that if aⁿ ≡ bⁿ (mod m) then a ≡ b (mod m).

Therefore, both the parts are proved.

To know more about integer, visit:

https://brainly.com/question/490943

#SPJ11

Title and scale the graph Finally, give the graph a title that describes what the graph represents. Also, give each axis a title and a scale that makes it easy to read and interpret the data.

To create a scatter plot from the data given in the table with variables `a` and `b`, you can follow the following steps:

Step 1: Organize the dataThe first step in creating a scatter plot is to organize the data in a table. The table given in the question has the data organized already, but it is in a vertical format. We will need to convert it to a horizontal format where each variable has a column. The organized data will be as follows:````| Variable a | Variable b | |------------|------------| | 1 | 12 | | 5 | 8 | | 2 | 10 | | 7 | 5 | | 8 | 4 | | 1 | 10 | | 3 | 8 | | 7 | 10 | | 6 | 5 | | 6 | 6 | | 2 | 11 | | 9 | 4 | | 7 | 4 | | 5 | 5 | | 2 | 12 |```

Step 2: Create a horizontal and vertical axisThe second step is to create two axes, a horizontal x-axis and a vertical y-axis. The x-axis represents the variable a while the y-axis represents variable b. Label each axis to show the variable it represents.

Step 3: Plot the pointsThe third step is to plot each point on the graph. To plot the points, take the value of variable a and mark it on the x-axis. Then take the corresponding value of variable b and mark it on the y-axis. Draw a dot at the point where the two marks intersect. Repeat this process for all the points.

Step 4: Title and scale the graph Finally, give the graph a title that describes what the graph represents. Also, give each axis a title and a scale that makes it easy to read and interpret the data.

To Know more about scatter plot visit:

https://brainly.com/question/29231735

#SPJ11

The given statement is false as an assumption of non-parametric tests is that the distribution does not need to be normal.

Question 2The given statement is true as chi-square tests can be used when the data is measured on a nominal scale. Question 3The observed frequencies for a chi-square test can contain fractions or decimal values. Question 4The term expected frequencies refers to the frequencies that are hypothesized for the population being examined. The expected frequencies are computed from the null hypothesis found in the sample data.The chi-square test is a non-parametric test used to determine the significance of how two or more frequencies are different in a particular population. The non-parametric test means that the distribution is not required to be normal. Instead, this test relies on the sample data and frequency counts.The chi-square test can be used for nominal scale data or categorical data. The observed frequencies for a chi-square test can contain fractions or decimal values. However, the expected frequencies are computed from the null hypothesis found in the sample data. The expected frequencies are the frequencies that are hypothesized for the population being examined. Therefore, option D correctly describes the expected frequencies.

To know more about FALSE statement  visit:

https://brainly.com/question/31965986

#SPJ11

The required probability of obtaining a z value between -2.4 to -2.0 is 0.0146.

Given, for a standard normal distribution, the probability of obtaining a z value between -2.4 to -2.0 is.

Now, we have to find the probability of obtaining a z value between -2.4 to -2.0.

To find this, we use the standard normal table which gives the area to the left of the z-score.

So, the required probability can be calculated as shown below:

Let z1 = -2.4 and z2 = -2.0

Then, P(-2.4 < z < -2.0) = P(z < -2.0) - P(z < -2.4)

Now, from the standard normal table, we haveP(z < -2.0) = 0.0228 and P(z < -2.4) = 0.0082

Substituting these values, we get

P(-2.4 < z < -2.0) = 0.0228 - 0.0082= 0.0146

Therefore, the required probability of obtaining a z value between -2.4 to -2.0 is 0.0146.

Know more about probability here:

https://brainly.com/question/251701

#SPJ11

A vector function r(t) that represents the curve of intersection of the two surfaces, the cone z = x² + y² and the plane z = 2 + y, is r(t) = ⟨t, -t² + 2, -t² + 2⟩.

To find the vector function representing the curve of intersection between the cone z = x² + y² and the plane z = 2 + y, we need to equate the two equations and express x, y, and z in terms of a parameter, t.

By setting x² + y² = 2 + y, we can rewrite it as x² + (y - 1)² = 1, which represents a circle in the xy-plane with a radius of 1 and centered at (0, 1). This allows us to express x and y in terms of t as x = t and y = -t² + 2.

Since the plane equation gives us z = 2 + y, we have z = -t² + 2 as well.

Combining these equations, we obtain the vector function r(t) = ⟨t, -t² + 2, -t² + 2⟩, which represents the curve of intersection.

Learn more about: Function

brainly.com/question/30721594

#SPJ11

Given equations of the region: y = ex y = 0x = 0, and x = 6Now, we have to find the area of the region bounded by the given graphs. So, we can plot these graphs on the coordinate axis and the area can be determined by finding the region's enclosed area.

As we can see from the graph, the region that is enclosed is bounded from x = 0 to x = 6 and y = 0 to y = ex. The area of the enclosed region can be determined as shown below: So, the area of the enclosed region is given as:∫dy = ∫exdx0≤x≤6∫dy = ex(6) - ex(0) = e6 - 1Therefore, the area of the region enclosed is (e^6 - 1) square units. Hence, option (c) is the correct answer.

To know more about equations visit:

brainly.com/question/29657983

#SPJ11

The solution to the problem is as follows:Given that 80% of teenagers aged 12-17 own smartphones. A random sample of 250 teenagers is drawn.

The probability is calculated by using the Central Limit Theorem and the TI-84 calculator, and the answer is rounded to at least four decimal places.PC <0.11)-0 Х $P(X<0.11)To find the probability of less than 75% of the sampled teenagers owned smartphones, convert the percentage to a proportion.75/100 = 0.75

This means that p = 0.75. To find the sample proportion, use the given formula:p = x/nwhere x is the number of teenagers who own smartphones and n is the sample size.Substituting the values into the formula, we get;$$p = \frac{x}{n}$$$$0.8 = \frac{x}{250}$$$$x = 250 × 0.8$$$$x = 200$$Therefore, the sample proportion is 200/250 = 0.8.To find the probability of less than 75% of the sampled teenagers owned smartphones, we use the standard normal distribution formula, which is:Z = (X - μ)/σwhere X is the random variable, μ is the mean, and σ is the standard deviation.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ11

The amount that will have accumulated in 10 years after the last deposit is approximately $13,299.25.

To calculate the accumulated amount, we can use the formula for compound interest:

A = P(1 + r/n)^(nt)

Where:

A = Accumulated amount

P = Principal amount (initial deposit)

r = Annual interest rate (as a decimal)

n = Number of times interest is compounded per year

t = Number of years

In this case, Sklyer has made deposits of $680 at the end of every quarter for 13 years, so the principal amount (P) is $680. The annual interest rate (r) is 5%, which is 0.05 as a decimal. The interest is compounded annually, so the number of times interest is compounded per year (n) is 1. And the number of years (t) for which we need to calculate the accumulated amount is 10.

Plugging these values into the formula, we have:

A = $680(1 + 0.05/1)^(1*10)

  = $680(1 + 0.05)^10

  = $680(1.05)^10

  ≈ $13,299.25

Therefore, the amount that will have accumulated in 10 years after the last deposit is approximately $13,299.25.

Learn more about  Interest

brainly.com/question/30393144

#SPJ11

The mean number of batteries sold over the weekend calculated using the mean formula is 4.56

Outcome (X) | Probability (P(X))

2 | 0.20

4 | 0.40

6 | 0.32

8 | 0.08

Mean = (2 * 0.20) + (4 * 0.40) + (6 * 0.32) + (8 * 0.08)

= 0.40 + 1.60 + 1.92 + 0.64

= 4.56

Therefore, the mean number of batteries sold over the weekend at the convenience store is 4.56.

Learn more on mean : https://brainly.com/question/20118982

#SPJ1