Answer:
1. When electric voltage is applied, an electric field within the metal triggers the movement of the electrons, making them shift from one end to another end of the conductor. Electrons will move toward the positive side.
2. Well, if you think about it logically, the Heisenberg Uncertainty Principle basically means that it's impossible to predict both exactly what the electron will do or exactly where the electron will be found. In other words, when you know where the electron is going, you don't know where it is.
Pls answer my question to the best of your ability down the bottom of yours. Thankyou! :)
Earth’s magnetic field is generated by a conducting fluid in its core. Explain why this is a theory.
Answer:
It's not a theory, The magnetic pull is from the core of the earth and pulls you down. example: I can jump and fall, Why? because of the core of the earth of me going p and then down. Why do you think that space doesn't have gravity? It's because it doesn't have a core, There are no planets that pull you down enough like earth.
The water gained 900 J of energy, what was the energy change of the metal?
Answer:
it lost 900J of energy I will assume and that would mean the change in energy is -900J
Explanation:
Order the following atoms from smallest to largest atomic radius: C, N, P
Answer:
N, C, P
Explanation:
What is “rounding down”?
Answer:
if the number is 4 or less than you can round down but if it's 5 or more round up
Explanation:
It makes the number simpler by making it smaller. Ex. 34 would round down to 30, 43 would round down to 40
Match each atomic particle with the correct charge.
1. proton neutral
2. neutron positive
3. electron negative
The proton is a postitive charge, therefore, being 1 (proton) matched to positive. Whilst neutron (2) is matched to neutral. Thus electron (3) is matched to negative.
what kind of chemical bond is established in hydrochloric acid?
Answer and Explanation:
HCl, also known as hydrochloric acid, has a covalent bond. The hydrogen (H) atom shares an electron with the chlorine (Cl) to form the bond.
SOMEONE HELP PLEASE!
Answer:
The nose consists of the visible external nose and the internal nasal cavity. The nasal septum divides the nasal cavity into right and left sides. Air enters two openings, the external nares (nostrils; singular, naris), and passes into the vestibule and through passages called meatuses. The bony walls of the meatuses, called concha, are formed by facial bones (the inferior nasal concha and the ethmoid bone). From the meatuses, air then funnels into two (left and right) internal nares. Hair, mucus, blood capillaries, and cilia that line the nasal cavity filter, moisten, warm, and eliminate debris from the passing air.
The pharynx (throat) consists of the following three regions, listed in order through which incoming air passes:
The nasopharynx receives the incoming air from the two internal nares. The two auditory tubes that equalize air pressure in the middle ear also enter here. The pharyngeal tonsil (adenoid) lies at the back of the nasopharynx.
The oropharyrnx receives air from the nasopharynx and food from the oral cavity. The palatine and lingual tonsils are located here.
The laryngopharynx passes food to the esophagus and air to the larynx.
The larynx receives air from the laryngopharynx. It consists of several pieces of cartilage that are joined by membranes and ligaments, shown in Figure 2:
The epiglottis, the first piece of cartilage of the larynx, is a flexible flap that covers the glottis, the upper region of the larynx, during swallowing to prevent the entrance of food.
The thyroid cartilage protects the front of the larynx. A forward projection of this cartilage appears as the Adam's apple (anatomically known as the laryngeal prominence).
The paired arytenoid cartilages in the rear are horizontally attached to the thyroid cartilage in the front by folds of mucous membranes. The upper vestibular folds (false vocal cords) contain muscle fibers that bring the folds together and allow the breath to be held during periods of muscular pressure on the thoracic cavity (straining while defecating or lifting a heavy object, for example). The lower vocal folds (true vocal cords) contain elastic ligaments that vibrate when skeletal muscles move them into the path of outgoing air. Various sounds, including speech, are produced in this manner.
The cricoid cartilage, the paired cuneiform cartilages, and the paired corniculate cartilages are the remaining cartilages supporting the larynx.
The trachea (windpipe) is a flexible tube, 10 to 12 cm (4 inches) long and 2.5 cm (1 inch) in diameter (Figure 2).
The mucosa is the inner layer of the trachea. It contains mucus‐producing goblet cells and pseudostratified ciliated epithelium. The movement of the cilia sweeps debris away from the lungs toward the pharynx.
The submucosa is a layer of areolar connective tissue that surrounds the mucosa.
Hyaline cartilage forms 16 to 20 C‐shaped rings that wrap around the submucosa. The rigid rings prevent the trachea from collapsing during inspiration.
The adventitia is the outermost layer of the trachea. It consists of areolar connective tissue.
The primary bronchi are two tubes that branch from the trachea to the left and right lungs.
Inside the lungs, each primary bronchus divides repeatedly into branches of smaller diameters, forming secondary (lobar) bronchi, tertiary (segmental) bronchi, and numerous orders of bronchioles (1 mm or less in diameter), including terminal bronchioles (0.5 mm in diameter) and microscopic respiratory bronchioles. The wall of the primary bronchi is constructed like the trachea, but as the branches of the tree get smaller, the cartilaginous rings and the mucosa are replaced by smooth muscle.
Alveolar ducts are the final branches of the bronchial tree. Each alveolar duct has enlarged, bubblelike swellings along its length. Each swelling is called an alveolus. Some adjacent alveoli are connected by alveolar pores.
The respiratory membrane consists of the alveolar and capillary walls. Gas exchange occurs across this membrane. Characteristics of this membrane follow:
Type I cells are thin, squamous epithelial cells that constitute the primary cell type of the alveolar wall. Oxygen diffusion occurs across these cells.
Type II cells are cuboidal epithelial cells that are interspersed among the type I cells. Type II cells secrete pulmonary surfactant (a phospholipid bound to a protein) that reduces the surface tension of the moisture that covers the alveolar walls. A reduction in surface tension permits oxygen to diffuse more easily into the moisture. A lower surface tension also prevents the moisture on opposite walls of an alveolus or alveolar duct from cohering and causing the minute airway to collapse.
Alveolar macrophage cells (dust cells) wander among the other cells of the alveolar wall, removing debris and microorganisms.
Why do mammals require lungs? Provide 3 reasons.
Which is an example of radiation?
O Troy's hand is burned when he touches hot wax.
O Earth is heated by energy from the Sun.
O Ahot dog is held over a fire and gets warm.
O Water is boiled in a pot on a stove burner.
The statement which is considered to be a good example of radiation is: B. Earth is heated by energy from the Sun.
The types of heat transfer.In Science, there are three (3) main types of heat transfer and these include:
ConductionConvectionRadiationWhat is radiation?Radiation can be defined as the transmission (transfer) of energy in the form of waves particles through a material medium or space. Thus, radiation is a type of heat transfer which causes a person on Earth that is sitting under the Sun to feel warm.
Read more on heat here: brainly.com/question/12072129
14 steps decay series
instructions for #4-5, balance each equation after substituting symbols and formulas for words, remembering to include abbreviations for the physical state.
For subscripts, just make sure the number is in the right location in the compound formula.
4. Iodine crystals react with chlorine gas to form solid iodine trichloride.
5. Solid sodium bicarbonate reacts with hydrochloric acid [HCl (aq)] to produce aqueous sodium chloride, water, and carbon dioxide gas.
Answer:
Ok:
Explanation:
4.
[tex]I_2_{(s)} + 3Cl_2_{(g)} => 2ICl_3{(s)}[/tex]
5.
[tex]NaHCO_3_{(s)} + HCl_{(aq)} => NaCl_{(aq)} + H_2O_{(l)} + CO_2_{(g)[/tex]
27.2Pb(NO3)2 --> 2Pb0 + 4NO2 + O2
O A. Synthesis
B. Single displacement
C. Decomposition
D. Combustion
pls help science
Which description properly describes the plant structures involved in photosynthesis?
Stomata take in water, sunlight, and carbon dioxide and release oxygen.
Phloem transports water, stomata take in carbon dioxide, and chlorophyll absorbs sunlight.
Xylem takes in water, sunlight, and carbon dioxide and releases oxygen.
Stomata take in carbon dioxide and release oxygen.
Answer:
Stomata take in water, sunlight, and carbon dioxide and release oxygen.
Explanation:
Photosynthesis collects and absorbs sunlight and converts the sunlight into sugars (glycose), then the plant stores the sugar and uses it.
Of the three types of plate boundaries, which type is most likely to be associated
with pulling or tension forces?
transform
convergent
divergent
Shonda’s car gets an average of LaTeX: 27 miles per gallon. Gas costs $LaTeX: 2.25 per gallon and she drives LaTeX: 892 miles to get from Baltimore, MD to Orlando, FL. What are the conversion factors she could use to calculate the cost of gas to get from Baltimore to Orlando? How much will she spend on gas?
The conversion factors she could use to calculate the cost of gas : 33.037 gallon from Baltimore to Orlando
She will spend $74.33 on gas
Further explanationGiven
Shonda’s car : 27 miles per gallon
Gas cost = $ 2.25/gallon
Distance Baltimore to Orlando = 892 miles
Required
Cost of gas
Solution
Total gallon needed to get from Baltimore to Orlando :
892 miles : 27 miles/gallon = 33.037 gallon
Cost of gas :
33.037 gallon x $2.25/gallon = $74.33
8. __H2 + __O2-> __H2O
9. __K2SO4 + __H2-> __H2SO4 + __K
10. __NO2 + __H2O-> __HNO3 + __NO
Anser:
Explanation:
hope this helps
If you find a chemical in the lab and are unsure of
its identity, what is the best way to find out what it
is?
Answer:
C. read the label on the container
Explanation:
What information is found in an SDS? Check all that apply.
A. the identification of the chemical
C. the chemical and physical properties of the substance
D. the first-aid measures to take if an accident occurs involving the chemical
Answer:
C
Explanation:
just did it
Hotter objects have _______________________ particles, while cooler objects have _______________________ particles.
Hope this helps
Hotter objects have faster particles, and cooler objects have slower particles.
As the first five elements in Group 14 are considered in order from top to bottom, there are changes in both the
A
electronegativity values and number of first shell electrons
B
electronegativity values and atomic radii
C
number of valence shell electrons and number of first shell electrons
D
number of valence shell electrons and atomic radii
Answer:
A
Explanation:
beacause in both the electronegativity values and number of first she'll electrons
In group 14 from top to bottom there are changes in both the electronegativity values and atomic radii changes.
What are groups?Groups in the periodic table are the columns in which elements are present which all are having same number of valence electrons.
On moving top to bottom in the 14th group of the periodic table:
Atomic size of the elements increases and electronegativity decreases.Number of electrons in the first shell of all elements will be same and in the outer most shell is also same.Hence electronegativity values and atomic radii changes.
To know more about groups of periodic table, visit the below link:
https://brainly.com/question/1645905
#SPJ2
How many moles of chlorine atoms are in 6.3 × 1023 chlorine molecules?
Answer:
(6.3x10^23)/(6.02x10^23) = 1.047 mol Cl
The number of moles of the chlorine atoms in the 6.022 × 10²³ molecules of chlorine is equal to 2.10 mol.
What is Avogadro's number?Avogadro’s number can be used to express the number of entities in one mole of any substance and these units can be atoms, molecules, ions, electrons, or protons, depending upon the kind of chemical reaction or reactant and product.
The Avogadro’s constant has a numerical value approximately equal to 6.022× 10²³ mol⁻¹.
Given, the number of molecules of chlorine = 6.3× 10²³
As the one chlorine mole has chlorine atoms = 2
The number of moles of chlorine molecules in 6.3× 10²³ will be :
= 6.3× 10²³/ 6.022× 10²³ = 1.05 moles
One mole of chlorine molecules has Cl atoms = 2 moles
1.05 moles of chlorine molecules have Cl atoms = 2 × 1.05 = 2.10 mol
Therefore, the number of moles of Chlorine atoms is equal to 2.10.
Learn more about Avogadro's number, here:
brainly.com/question/11907018
#SPJ2
What conversion factors
determine the number of
molecules from the number of
moles of a compound?
Answer: Avogrado's number, or 6.022 x 10^23
Explanation:
To convert from moles to atoms, multiply the molar amount by Avogadro's number. To convert from atoms to moles, divide the atom amount by Avogadro's number (or multiply by its reciprocal).
PLEASE HELPPP!!!!!! ASAP!!!!
Which of the following best describes cations? Question 19 options: A) They're negatively charged because they lost an electron. B) They're positively charged because they gained an electron. C) They're positively charged because the number of electrons remained the same. D) They're positively charged because they lost an electron.
Answer:D
Explanation:trust me bro
Answer:
D
Explanation: I took the test
WILL GIVE BRAINIEST is C6H1005 + O2 → CO2 + H2O balanced?
Answer:
No! The balanced equation is given below:
C₆H₁₀O₅ + 6O₂ —> 6CO₂ + 5H₂O
Explanation:
C₆H₁₀O₅ + O₂ —> CO₂ + H₂O
The equation above is not balanced. It can be balance as illustrated below:
C₆H₁₀O₅ + O₂ —> CO₂ + H₂O
There are 6 atoms of C on the left side and 1 at the right side. It can be balance by 6 in front of CO₂ as illustrated below:
C₆H₁₀O₅ + O₂ —> 6CO₂ + H₂O
There are 10 atoms of H on the left side and 2 atoms on right side. It can be balance by 5 in front of H₂O as illustrated below:
C₆H₁₀O₅ + O₂ —> 6CO₂ + 5H₂O
There are a total of 7 atoms of O on the left side and a total of 17 atoms on the right side. It can be balance by 6 in front of O₂ as illustrated below:
C₆H₁₀O₅ + 6O₂ —> 6CO₂ + 5H₂O
Now, the equation is balanced.
Select the correct answer from each drop-down menu.
Researchers stationed at different areas on a mountain and in a tunnel midway through the mountain boiled water at the same time. Even though the water at every station was at the same temperature, the pot at the top of the mountain started boiling before the others. Why?
Water boils when the vapor pressure is
the atmospheric pressure. The atmospheric pressure
at the top of the mountain.
Water boils when the vapour pressure is least the atmospheric pressure.
The atmospheric pressure is equal at the top of the mountain.
What is atmospheric pressure?The air around you has weight, and it presses against everything it touches. That pressure is called atmospheric pressure, or air pressure. It is the force exerted on a surface by the air above it as gravity pulls it to Earth.
As we go up in altitude the air pressure becomes less. When the pressure decreases, it takes less energy to get the water molecules to escape the surface. So the temperature is less than it would be at sea level.
Air pressure is higher or greater at the bottom of a mountain. This is because the height of the air above that level is thicker than at the top.
Pressure is given by the equation, P=rho*g*h, where rho is the air density, g is the gravity value and h is the thickness of the air layer on top of the level where we are considering the pressure.
Therefore, as we can see, at the bottom of the mountain, the thickness h of air is greater, and so is the pressure.
Hence, water boils when the vapour pressure is least the atmospheric pressure and the atmospheric pressure is equal at the top of the mountain.
Learn more about the atmospheric pressure here:
https://brainly.com/question/11484577
#SPJ2
name two reactions which are endothermic in nature..
Melting ice cubes. Melting solid salts. Evaporating liquid water
Answer:
ham nahi jante hai be happy
Identify the following as a chemical (C) or physical property (P):
1. blue color ______
2. melting point ______
3. density ______
4. reacts with water ______
5. flammability (burns) ______
6. solubility (dissolves) ______
7. boiling point ______
8. luster ______
Answer: 1. Phys 2. Phys 3. Phys 4. Chem 5. Chem 6. Phys 7. Phys 8. Phys
Explanation:
According to the concept of physical and chemical property ,reaction with water and flammability are chemical properties while rest are physical properties.
What are chemical properties?These properties are defined as those properties which become evident during or after a chemical reaction after the identity of the substance is changed during chemical reaction.
These properties cannot be determined externally just by viewing the substance ,these change immensely after a substance undergoes a chemical change.These are used for identification of unknown substances and for building up chemical classifications.
The major chemical properties are flammability,toxicity,reactivity,acidity and heat of combustion.For a chemical property to be apparent , it is necessary that the structure of the substance is altered.
Learn more about chemical properties,here:
https://brainly.com/question/5186976
#SPJ2
A molecule forms when
A. 2 or more atoms are bonded covalently.
B. 2 or more atoms are bonded ionically.
C. 2 or more atoms transfer electrons to a nonmetal.
Write the ionic equation, including state symbols, for the reaction between zinc and iron(II) sulfate
Answer:
Fe (s) + Cu^2+ (aq) + SO4^2- (aq) --> Cu (s) + Fe^2+ (aq) + SO4^2- (aq)
Explanation:
which one of the following groups are decomposers a. algae b. protist c. fungi d. green plants e. photosynthetic bacteria
Answer:c
Explanation:
What is the conversion for 5 g + 3.3 mL =
Answer:
9 g/ml
Explanation:
5 + 3.3 = 8.5
But you should use sig figs.
5 has no tenths, hundredths, and etc.
Therefore the 8.5 rounds up to 9
So the answer is 9.
