The turbines in a hydroelectric plant are fed by water falling from a 50 m height. Assuming 91% efficiency for conversion of potential to electrical endrgy, and 8% loss of the resulting power in transmission, what is the mass flow rate of water required to power a 200 W light bulb? ​

Answers

Answer 1

From  the information given;

the height of the water stream = 50 mthe efficiency of conversion from potential energy to electrical energy is  91%loss of power transmission = 8%

To determine the mass flow rate, let's start by understanding some concepts and parameters.

The power is known to be the energy per unit of time. Mathematically, it can be written as:

[tex]\mathbf{Power = \dfrac{Energy}{Time}}[/tex]

[tex]\mathbf{P =\dfrac{E_p}{time}}[/tex]

[tex]\mathbf{P =\dfrac{m\times g\times z}{time}}[/tex]

where;

[tex]\mathbf{E_p}[/tex] is the potential energy of the streamm = mass flow rateg = acceleration under gravityz = height

Thus;

[tex]\mathbf{E_p}[/tex] = m × 9.81 m/s² × 50 m

[tex]\mathbf{E_p}[/tex] = m × 490.5 (m²/s²)

Recall that:

The power P = 200 W, and;the conversion of the P.E = 91% = 0.91

[tex]\mathbf{E_p}[/tex] = 0.91 × 490.5m (m²/s²)

[tex]\mathbf{E_p}[/tex] = 446.355m (m²/s²)

Since the resulting power transmission is said to be 8%

Then;

the loss in the power transmission (P) = 100% - 8% ×  446.355m (m²/s²)

the loss in the power transmission (P) = 92%  ×  446.355m (m²/s²)

the loss in the power transmission (P) = 0.92  ×  446.355m (m²/s²)

the loss in the power transmission (P) =  410.65m (m²/s²)

Finally;

P = 410.65m (m²/s²)

[tex]\mathbf{P = 410.65 \times m (\dfrac{m^2}{s^2})}[/tex]

replacing the values, we have:

[tex]\mathbf{200 = 410.65 \times m (\dfrac{m^2}{s^2})}[/tex]

[tex]\mathbf{m = \dfrac{200 watt}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]

[tex]\mathbf{m = \dfrac{200 \dfrac{J}{s}}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]

since 1 J/s = 1 kgm²/s²)

Then:

[tex]\mathbf{m = \dfrac{200 \dfrac{\dfrac{kg\times m^2}{s^2}}{s}}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]

[tex]\mathbf{m = \dfrac{200 \ {kg}}{410.65 \ s}}[/tex]

mass flow rate of the water (m) = 0.487 kg/s

Therefore, we can conclude that the mass flow rate of the water required to power a 200 W bulb light is 0.487 kg/s

Learn more about the hydroelectric plant here:

https://brainly.com/question/2635539?referrer=searchResults


Related Questions

A hydrocarbon contains only the elements____?

Answers

Explanation:

elements are carbons and hydrogen

Answer:

Carbon and Hydrogen.

Explanation:

It’s in the name Hydro (H) Carbon (C)

Which technique is best suited to each application?

a. In the second week of a four week biochemistry experiement, you have 50 fractions collected from a gel filtration column to determine which fractions contain lactate dehydrogenase. You are given only 400 uL of 0.100 mg/mL lactate dehydrogenase to prepare your calibration curve. 96-well microplate
b. Your environmental lab has 2000 samples to be analyzed for trace ammonia by next week. discrete analyzer.
c. Twenty water samples must be analyzed for Cl-, NH3, PO3-, and So during each work shift. flow injection analysis colorimeter.
d. Your professor heard you will be hiking the Appalachian Trail next summer. She asks you to collect 100-mL water samples from the ten streams with the highest concentration of phosphate.

Answers

Answer:

a. discrete analyzer

b. 96 well microplate

c. flow injection analysis

d. colorimeter

Explanation:

96 well microplates are instruments designed for sample collection and throughput screening. If an environment lab has collected 2000 samples then 96 well microplate is best suited application. Discrete analyzer is automated chemical analyzer which performs test on samples kept in discrete cells. Flow injection analysis is approach used for chemical analysis. It injects a plug of sample into a flowing carrier stream. Colorimeter is a device which measures absorbance of wavelength of light by a specific solution.

What is the molarity of a solution containing 150 g of zinc sulfate (ZnSO4) per liter?

Answers

Answer:

0.93 M

Step-by-step Explanation:

First, we have to calculate the molar mass (MM) of ZnSO₄ by using the molar mass of each chemical element:

MM(ZnSO₄) = 65.4 g/mol Zn + 32 g/mol S + (16 g/mol x 4) = 161.4 g/mol

Then, we divide the mass of ZnSO₄ into its molar mass to obtain the number of moles:

moles ZnSO₄ = mass/MM = 150 g/(161.4 g/mol)= 0.93 mol

Since the molarity of a solution expresses the number of moles of solute per liter of solution, we calculate the molarity (M) as follows:

M = moles ZnSO₄/1 L =  0.93 mol/1 L = 0.93 M

A 2.584 g sample of a compound containing only carbon, hydrogen, and oxygen is burned in an excess of dioxygen, producing 5.874 g CO2 and 2.404 g H2O. What mass of oxygen is contained in the original sample?a. 0.7119 g.b. 0.8463 g.c. 0.29168 g.d. 0.1793 g.e. 0.6230 g.

Answers

Answer:

a. 0.7119 g

Explanation:

To solve this question we need to know that all carbon of the compound will react producing CO2 and all Hydrogen producing H2O.

Thus, we can find the mass of C and the mass of H and by difference regard to the 2.584g of the compound we can find the mass of oxygen as follows:

Moles CO2 = Moles C -Molar mass: 44.01g/mol-

5.874g CO2 * (1mol/44.01g) = 0.1335 moles CO2 = 0.1335 moles C

Mass C -Molar mass: 12.01g/mol-:

0.1335 moles C * (12.01g /mol) = 1.6030g C

Moles H2O -Molar mass: 18.01g/mol-

2.404gH2O * (1mol / 18.01g) = 0.1335 moles H2O * (2mol H / 1mol H2O) = 0.267 moles H

Mass H -Molar mass: 1g/mol-

0.267 moles H * (1g/mol) = 0.2670g H

Mass Oxygen =

Mass O = 2.584g compound - 1.6030g C - 0.2670g H

Mass O = 0.714g O ≈

a. 0.7119 g

Sobre ações relacionadas ao aquecimento global, assinale somente as alternativas corretas:
a) ( x) As ações humanas não influenciam no aumento da temperatura do planeta.
b) ( ) As mudanças climáticas são intensificadas pela emissão de gases das atividades humanas.
c) ( ) A queima de combustíveis fósseis e de florestas são as principais ações humanas que liberam gases que intensificam o efeito estufa.
d) ( ) O efeito estufa é um fenômeno natural.
e) ( ) Se as águas dos oceanos ficarem mais quentes, os furacões não terão tanta força.

Answers

Answer:

123456788012346778901234567890

Assuming tea leaves contain 5.0% caffeine by weight what is the maximum weight of caffeine you could isolate from 10.g of tea leaves? Show your work.

Answers

Answer:

0.50 g Caffeine

Explanation:

Step 1: Given data

Concentration of caffeine by weight in tea leaves: 5.0%

Mass of tea leaves: 10. g

Step 2: Calculate the maximum weight of caffeine that can be isolated

The concentration of caffeine by weight in tea leaves is 5.0%, that is, there are 5.0 g of caffeine per 100 g of tea leaves. The maximum weight of caffeine in 10. g of tea leaves is:

10. g Tea leaves × 5.0 g Caffeine/100 g Tea leaves = 0.50 g Caffeine

Leaming Task 1:
Distinguish the process as spontaneous or non-spontaneous process. Write S it spontaneous and NSi non-spontaneous
on the bionk.
1. Melling ofice
2 Ruisting of ton
3. Marble going down the spiral.
4. Going up the
& Keeping the food fresh from spolage​

Answers

Solution :

Spontaneous Process

A spontaneous process is defined as the process that occurs without the help of any external aid or inputs. A spontaneous process is a natural process which occurs naturally in the environment.

Non Spontaneous process

A non spontaneous process is a process which does not occur naturally. Some inputs are provided for the process to occur. Energy from external source is applied into the process to start the process.

The following processes are :

1. Melling of ice   ---- Spontaneous

2 Rusting of iron  --- Spontaneous

3. Marble going down the spiral.   --- spontaneous

4. Going up the hill  ---- Non spontaneous

5. Keeping the food fresh from spoilage​  --- Non spontaneous

The following list of properties is most descriptive of a(n) ______________. Low melting point, non-conductor of electric current. Group of answer choices

Answers

Answer:

This question is incomplete

Explanation:

This question is incomplete but the completed question is below;

"The following list of properties is most descriptive of a(n) ______

1. High melting point, conductor of electricity when dissolved in water

2. Low melting point, non-conductor of electric current

3. Malleable, ductile, insoluble in water.

The choices for all 3 are: a) metallic solid b) molecular solid c) ionic solid d) all of these e) none of these f) more than one of these"

1. Ionic solid: Ionic solids are solids that have ionic/electrovalent bonds holding it's constituent molecules together. These bonds are strong bonds that involve the transfer of electrons from one constituent atom (the metal) to another constituent atom (the nonmetal). This strong bond causes the solid to have a high melting and boiling point. Also, when dissolved in water, the constituent atoms (involved in the electron transfer) dissociate to form ions (become charged) and thus easily carry electric charges (i.e conduct electricity).

Examples are Sodium Chloride and Potassium Iodide

2. Molecular solids: These are solids whose constituent molecules are held together by a weak bond/force known as Van der Waal forces. This forces are easily broken down when subjected to heat and thus the molecular solids have a low melting point. Also, these solids do not have carriers of heat or electric charges in them and are thus non-conductors of electric current.

Examples are Ice (frozen water) and sucrose

3. Metallic solids: These of solids made from constituent metal atoms only. The nuclei of these constituent metal atoms have the ability to move past one another without disrupting there metallic bonding; it is for this reason they are malleable and ductile. There constituent atoms however do not dissociate in water and are thus insoluble in water.

Examples are aluminium and copper crystal.


Plastic is a polymer
-True
-False

Answers

TRUE

Explanation:

*not sure about this answer

True I believe

Hope I’m right sorry if I’m not

In aqueous solution the Ni2" ion forms a complex with four ammonia molecules. Write the formation constant expression for the equilibrium between the hydrated metal ion and the aqueous complex. Under that, write the balanced chemical equation for the first step in the formation of the complex K,=________.

Answers

Answer:

The correct equation is "[tex]\frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]".

Explanation:

According to the question,

Throughout an aqueous solution, [tex]Ni^{2+}[/tex] exist as [tex][Ni(H_2O)_4]^{2+}[/tex]

So,

⇒ [tex][Ni(H_2O)_4]^{2+} + 4NH_3 \rightleftharpoons [Ni(NH_3)_4]^{2+} + H_2O[/tex]

⇒ [tex]K_f = \frac{[Ni(NH_3)_4]^{2+}}{[Ni(H_2O)_4^{2+}] [NH_3]^4}[/tex]

Here, we have excluded [tex][H_2O][/tex] as concentration of water will be const.

Now,

This formation of [tex][Ni(NH_3)_4]^{2+}[/tex] proceeds via several steps,

Step 1:

⇒ [tex][Ni(H_2O)_4]^{2+}+NH_3 \rightleftharpoons [Ni(H_2O)_3 (NH_3)]^{2+} + H_2O[/tex]

⇒ [tex]K_1 = \frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]

How many atoms are in protons

Answers

Answer:

the number of protons in a atom is unique to each element

Explanation:

protons are about 99.86% as massive neutrons. The number of protons in a atom is unique to each element .For example carbon atoms have six protons in an atom is referred to as the atomic number of that element

2) If a brick has a length of 13.77 cm, a width of 8.50 cm, and a height of 5.12 cm:
a) What is the volume of the brick?
b) If the brick has a mass of 895.3 g, what is its density?

Answers

Answer:

a. 599 cm³

b. 1.49 g/cm³

Explanation:

A. Volume

Volume is the amount of space an object occupies. Since this is a brick, the object is a rectangular prism. The formula for the volume of a rectangular prism is the product of length, width, and height.

[tex]V= l *w*h[/tex]

The brick's length (l) is 13.77 centimeters, the width (w) is 8.50 centimeters, and the height (h) is 5.12 centimeters. Substitute these values into the formula.

[tex]V= 13.77 \ cm * 8.50 \ cm * 5.12 \ cm[/tex]

Multiply the numbers together.

[tex]V= 117.045 \ cm^ 2* 5.12 \ cm[/tex]

[tex]V= 599.2704 \ cm^3[/tex]

The original measurements have at least 3 significant figures, so our answer must have 3. For the number we calculated, that is the ones place. The 2 in the tenths place tells us to leave the 9 in the ones place.

[tex]V \approx 599 \ cm^3[/tex]

[tex]\bold {The \ volume \ of \ the \ brick \ is \ approximately \ 599 \ cubic \ centimeters}}[/tex]

2. Density

Density is the amount of matter in a specified space. The formula for density is mass over volume.

[tex]d= \frac{m}{v}[/tex]

The mass of the brick is 895.3 grams and we just found the volume to be 599.2704 cubic centimeters. Substitute the values into the formula.

[tex]d= \frac{895.3 \ g}{599 \ cm^3}[/tex]

Divide.

[tex]d= 1.494657763 \ g/cm^3[/tex]

Round to three significant figures. For the number we calculated, that is the hundredth place. The 4 in the thousandth place tells us to leave the 9 in the hundredth place.

[tex]d \approx 1.49 \ g/cm^3[/tex]

[tex]\bold {The \ density\ of \ the \ brick \ is \ approximately \ 1.49 \ grams /cubic \ centimeters}}[/tex]

Ethylene glycol (C2H6O2) is mixed with water to make auto engine coolants. How many grams of C2H6O2 are in 5.00 L of a 6.00 M aqueous solution

Answers

Answer:

1860g.

Explanation:

It is known that the molar mass of C2H6O2 is 62.08 g/mol.,

Now to  solve for the number of moles of solute, one must multiply both

sides by the volume:

moles of solute = (6.00 M)(5.00 L) = 30.0 mol

Notice since the definition of molarity is mol/L, the

product M × L gives mol, a unit of amount.

Use the molar  mass of C3H8O3, one can convert mol to g:

Mass m =30 mol × 62.08 g/mol

m = 1860g.

Hence, there are 1,860 g of C2H6O2 in the specified amount of

engine coolant.

which molecule has 9 carbon atoms

Answers

Answer:

c9h8o2

Explanation:

The molecule which has 9 carbon atom is [tex]C_{9} H_{8} O[/tex](cinnamaldehyde).

What is molecule?

 More than one atoms make up a molecule. If they have more than one atom, atoms could be the same for example, an oxygen molecule contains two oxygen atoms) as well as different (for example, a hydrogen molecule contains two hydrogen atoms.

What is cinnamaldehyde?

Cinnamaldehyde is a kind of organic chemical with the formula C6H5CH=CHCHO and the formula C6H5CH=CHCHO. It's mostly the trans isomer that's found in nature.

It is known that the number of carbon atom is 9 hence molecule will be cinnamaldehyde

To know more about cinnamaldehyde and molecule.

https://brainly.com/question/14897941

#SPJ2

If a 520 mg sample of technetium-99 is used for diagnostic procedure, how much of Tc-99 remains after 30.0h? Half life of Tc-99 is 6.0 hours.

Answers

16.25 mg
I have attached an image of the half life formula.
In this problem, N0 would be 520, since that is the initial amount.
t = 30.0 Hours
t 1/2 = 6.0 hours
Now plug everything into the equation. You get 16.25 mg. No


0.28 M Ca(NO3)2
Express your answer using two significant figures.

Answers

Answer:

Mass=Moles × RFM

Mass= 0.28M× 164

Mass= 45.92 grammes

Which acid or base (along with its corresponding salt) should be used to generate a buffer solution with pH around 3.5

Answers

Answer:

Formic acid

Sodium formiate

Explanation:

To determine acid or base that can generate a buffer solution with pH around 3.5, we have to think in the acid whose pKa = pH.

Although we have to also think in buffer capacity, a measure which can cause a change of 1 pH unit in 1 L of solution.

Buffer capacity does not only depend on the concentration of its components but also of the relationship between that concentrations.

When pH = pKa, buffer capacity is maximum which means that the concentration of conjugated species is the same and the ability to oppose pH changes is maximum.

One example with pH = pKa or nearly if:

COOH⁻  + Na⁺ →  NaCOOH

HCOOH  +  H₂O  →  COOH⁻  + H₃O⁺     Ka: 1.8×10⁻⁴

pKa = 3.74

You need to produce a buffer solution that has a pH of 5.50. You already have a solution that contains 10 mmol (millimoles) of acetic acid. How many millimoles of acetate (the conjugate base of acetic acid) will you need to add to this solution?

Answers

Answer:

56.9 mmoles of acetate are required in this buffer

Explanation:

To solve this, we can think in the Henderson Hasselbach equation:

pH = pKa + log ([CH₃COO⁻] / [CH₃COOH])

To make the buffer we know:

CH₃COOH  +  H₂O  ⇄   CH₃COO⁻  +  H₃O⁺     Ka

We know that Ka from acetic acid is: 1.8×10⁻⁵

pKa = - log Ka

pKa = 4.74

We replace data:

5.5 = 4.74 + log ([acetate] / 10 mmol)

5.5 - 4.74 = log ([acetate] / 10 mmol)

0.755 = log ([acetate] / 10 mmol)

10⁰'⁷⁵⁵ = ([acetate] / 10 mmol)

5.69 = ([acetate] / 10 mmol)

5.69 . 10 = [acetate] → 56.9 mmoles

What is the molecular geometry of CIO3F as predicted by the VSEPR model?

Multiple Choice
trigonal pyramidal
square planar
square pyramidal
tetrahedral
octahedral

Answers

Explanation:

since there are no lone pairs on the central atom, the shape will be tetrahedral

What type of intermolecular force exist between H2O and Br2

Answers

Answer:

welcome to mobile legends

Explanation:

ml ka muna maya kana mag module

Write a balanced half-reaction for the reduction of liquid water to gaseous hydrogen in basic aqueous solution. Be sure to add physical state symbols where appropriate.

Answers

Answer:

2 H₂O(l) + 2 e⁻ ⇒ H₂(g) + 2 OH⁻(aq)

Explanation:

Let's consider the unbalanced half-reaction for the reduction of liquid water to gaseous hydrogen in basic aqueous solution.

H₂O(l) ⇒ H₂(g)

First, we will perform the mass balance. We will balance oxygen atoms by multiplying H₂O by 2 and adding 2 OH⁻ to the right side.

2 H₂O(l) ⇒ H₂(g) + 2 OH⁻(aq)

Then, we perform the charge balance by adding 2 electrons to the left side.

2 H₂O(l) + 2 e⁻ ⇒ H₂(g) + 2 OH⁻(aq)

Explain the term global warming​

Answers

Answer: A gradual increase in the overall temperature of the earth's atmosphere generally attributed to the greenhouse effect caused by increased levels of carbon dioxide, chlorofluorocarbons, and other pollutants.

Explanation:

A ligand is a molecule or ion that acts as a

Answers

Answer:

Lewis base/electron pair donors

Explanation:

Ligands are ions or neutral molecules which bond together with a central ion. They act as election pair donors, also known as Lewis bases, while the central ion they are connected to acts as the acceptor.

Therefore, a ligand is a molecule or ion that acts as a Lewis base/electron pair donors

Carbonic anhydrase is strongly inhibited by the drug acetazolamide, which is used as a diuretic (i.e., to increase the production of urine) and to lower excessively high pressure in the eye (due to accumulation of intraocular fluid) in glaucoma.

a. True
b. False

Answers

Answer:

a. True

Explanation:

There is strong inhibition of Carbon Anhydrase by Aceta-zolamide Carbonic Anhydrase. The drug acetazolamide is used as diuretic which increase the urine production in human body. It lowers pressure in eye in glaucoma.


3. At 35 C, a sample of gas has a volume of 256 ml and a pressure of 720.torr. What would the volume
be if the temperature were changed to 22 C and the pressure to 1.25 atmospheres

Answers

Answer:

The volume will be 185.83 mL.

Explanation:

Gay-Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. Gay-Lussac's law can be expressed mathematically as follows:

[tex]\frac{P}{T} =k[/tex]

Where P = pressure, T = temperature, k = Constant

Boyle's law says that the volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure. Boyle's law is expressed mathematically as:

P*V=k

Where P = pressure, V = volume, k = Constant

Finally, Charles's Law consists of the relationship that exists between the volume and the temperature of a certain quantity of ideal gas, which is kept at a constant pressure. For a given sum of gas at a constant pressure, as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases because the temperature is directly related to the energy of the movement of the gas molecules. .

In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:

[tex]\frac{V}{T} =k[/tex]

Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:

[tex]\frac{P*V}{T} =k[/tex]

Studying two different states, an initial state 1 and a final state 2, it is satisfied:

[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]

In this case:

P1= 720 torr V1= 256 mLT1= 35 C= 308 K (being 0 C= 273 K)P2= 1.25 atm= 950 torr (being 1 atm= 760 torr)V2= ?T2= 22 C= 295 K

Replacing:

[tex]\frac{720 torr*256 mL}{308 K} =\frac{950 torr*V2}{295 K}[/tex]

Solving:

[tex]V2= \frac{295K}{950 torr} *\frac{720 torr*256 mL}{308 K}[/tex]

V2= 185.83 mL

The volume will be 185.83 mL.

net ionic equation for 2AgF(aq) + k2S = Ag2S (s) + 2KF(aq)

Answers

Answer:

The net ionic equation shows the actual reaction more clearly and closer to reality because it writes soluble ionic compounds as the ions and then cancel the spectator ions not involved in the chemical reaction . The net ionic equation results shows the actual chemical reaction taking place.

The net ionic equation for for 2AgF(aq) + k₂S = Ag₂S (s) + 2KF(aq) will be; 2 Ag⁺(aq) + S²⁻(aq) → Ag₂S(s).

To write the net ionic equation for the reaction, we first need to write the balanced molecular equation and then convert it into the ionic equation before finally identifying the net ionic equation.

Write the balanced molecular equation:

2 AgF(aq) + K₂S(aq) → Ag₂S(s) + 2 KF(aq)

In this reaction, silver fluoride (AgF) reacts with potassium sulfide (K₂S) to produce silver sulfide (Ag₂S) and potassium fluoride (KF).

Write the complete ionic equation:

In the complete ionic equation, we separate all the aqueous species (dissociated ions) into their individual ions. Only the solid (s) and gas (g) compounds remain unchanged.

2 Ag⁺(aq) + 2 F⁻(aq) + 2 K⁺(aq) + S²⁻(aq) → Ag₂S(s) + 2 K⁺(aq) + 2 F⁻(aq)

Identify the spectator ions and then write the net ionic equation:

The spectator ions are the ions that do not participate in the actual chemical reaction and remain the same on both sides of the equation. In this reaction, the potassium ions (K⁺) and fluoride ions (F⁻) are spectator ions because they appear on both sides of the equation unchanged.

Net ionic equation:

2 Ag⁺(aq) + S²⁻(aq) → Ag₂S(s)

The net ionic equation shows only the species that actively participate in the chemical reaction. In this case, the silver ions (Ag⁺) and sulfide ions (S²⁻) are the ones involved in forming the silver sulfide (Ag₂S) precipitate.

To know more about net ionic equation here

https://brainly.com/question/34257815

#SPJ3

--The given question is incomplete, the complete question is

"Write the net ionic equation for this reaction. 2AgF(aq) + k₂S = Ag₂S (s) + 2KF(aq)."--

A gas occupies a volume of 202 ml at a pressure of 505 torr. To what pressure must the gas be subject in order to change the volume to 65.0 ml

Answers

Answer:

1569 torr

Explanation:

Assuming ideal behaviour and constant temperature, we can solve this problem by using Boyle's law, which states:

V₁P₁ = V₂P₂

Where in this case:

V₁ = 202 mLP₁ = 505 torrV₂ = 65.0 mLP₂ = ?

We input the data given by the problem:

202 mL * 505 torr = 65.0 mL * P₂

And solve for P₂:

P₂ = 1569 torr

give one use of zinc​

Answers

Most Zinc are used to galvanise other metals such as iron which helps to prevent rusting
If you need any more let me know

What is the direct function of the energy released from the nuclear chain reaction in a nuclear power plant? turning the blades of the turbine heating water to produce steam powering the condenser carrying electricity from the plant to consumers

Answers

Answer:

the energy released is to make steam to create electricity. yes you are right i just didnt feel like being super technical

In a nuclear reaction, the  direct function of the energy released from the nuclear chain reaction in a nuclear power plant is turning the blades of the turbine heating water to produce steam .

What are nuclear reactions?

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/12786977

#SPJ7

from kinatic point of view explain the change from solid to liquied based on the effect of change of tempreture.​

Answers

Answer:

Temperature affects the kinetic energy in a gas the most, followed by a comparable liquid, and then a comparable solid. The higher the temperature, the higher the average kinetic energy, but the magnitude of this difference depends on the amount of motion intrinsically present within these phases.

Explanation:

Liquids have more kinetic energy than solids. When a substance increases in temperature, heat is being added, and its particles are gaining kinetic energy. Because of their close proximity to one another, liquid and solid particles experience intermolecular forces. These forces keep particles close together.

Other Questions
If f(x) = x2, andg(x) = x 1, thenf(g(x)) = [? ]x2+[?]+ [?] Explain about the Graphics mode Initialization and various in build graphics functions in C library. use the zeros and the labeled point to write the quadratic function represented by the graph Woodpecker(A) was found in relatively large numbers in a particular ecosystem. however since the addition of a new species,woodpecker(B) its population has greatly decreased. This example can be used to illustrate What is the correct sequence of events in DNA replication?A. New bases are added, Two resulting strands wind into helices , DNA strands separate, DNA Helix unwinds.B. DNA Helix unwinds, Two resulting strands wind into helices, DNA strands separate, New bases are added.C. DNA Helix unwinds, DNA strands separate, New bases are added, Two resulting strands wind into helices.D. DNA strands separate, New bases are added, DNA Helix unwinds, Two resulting strands wind into helices. Plzz answer this questionChapter:Tense How was manganese, a heavy element present in trace amounts in thehuman body, formed?O A. Through the star cycleB. Through the big bangO C. By fusion in small starsO D. By fusion in large stars use the figure to find n please. Fluent readers:pay attention to various signals in the text.notice when different words are being emphasized.recognize the presence of humor or sarcasm and the mood of the text.All of the choices are correct. Plz help me find a on the triangle show work plz HELP!!!!!How did farmers in marshy areas modify the environment to make it suitablefor farming?A. They started raising cattle.B. They irrigated the fields.C. They drilled for oil.O D. They dug drainage ditches. Which statements about the box plot are correct? Check all that apply.A box and whisker plot. The number line goes from 30 to 80. The whiskers range from 34 to 76, and the box ranges from 42 to 70. A line divides the box at 46.Fifty percent of the data values lies between 34 and 46.Seventy-five percent of the data values lies between 42 and 70.It is unlikely that there are any outliers.The interquartile range is 24.The range is 36. All paragraphs should have: a) Support sentencesb) details that explain the significance of the informationc) a topic sentenced) all of the choices are correcte) evidence to support claims Let f(x) = 9x 1 and g(x) = x3. Evaluate (g f)(0).A.8B.1C.1D.0 After the 2008 economic meltdown, finances were very uncertain, making saving money extremely important. To help with this, certain rates were changed which affect everyone's paychecks. Social Security taxes were temporarily reduced and minimum wage was increased. This means that there was more take-home money in a paycheck which is perfect for saving. Which is the best way to deal with financial uncertainty How do most scientists think humans evolved?A. Humans evolved from gorillas and other primates.B. Humans have not evolved.C. Gorillas evolved from humans and chimpanzees.D. Humans, chimpanzees, and other primates share a commonancestor. Although your project has been accepted by the customer, the contract with the system vendor specifies that it will support the system for three months after acceptance. Which step should you wait to take until the end of the three months? pls help im stuck, its the last question and i need it done Which of the following steps in the formal planning process involves studying past events, examining current conditions, and forecasting future trends?Question 1 options:a) Analyzing the situationb) Generating alternative goals and plansc) Evaluating goals and plansd) Selecting goals and planse) Monitoring and controlling performance In the 1800s, help for those living in poverty was mainly given by theA. civil societiesB. governmentC. public schoolsD. factory owners