Answer:
62.8 μC
Explanation:
Here is the complete question
The volume electric charge density of a solid sphere is given by the following equation: ρ = (0.2 mC/m⁵)r²The variable r denotes the distance from the center of the sphere, in spherical coordinates. What is the net electric charge (in μC) of the sphere if the radius of the sphere is 0.5 m?
Solution
The total charge on the sphere Q = ∫∫∫ρdV where ρ = volume charge density = 0.2r² and dV = volume element in spherical coordinates = r²sinθdθdrdΦ
So, Q = ∫∫∫ρdV
Q = ∫∫∫ρr²sinθdθdrdΦ
Q = ∫∫∫(0.2r²)r²sinθdθdrdΦ
Q = ∫∫∫0.2r⁴sinθdθdrdΦ
We integrate from r = 0 to r = 0.5 m, θ = 0 to π and Φ = 0 to 2π
So, Q = ∫∫∫0.2r⁴sinθdθdrdΦ
Q = ∫∫∫0.2r⁴[∫sinθdθ]drdΦ
Q = ∫∫0.2r⁴[-cosθ]drdΦ
Q = ∫∫0.2r⁴-[cosπ - cos0]drdΦ
Q = ∫∫∫0.2r⁴-[-1 - 1]drdΦ
Q = ∫∫0.2r⁴-[- 2]drdΦ
Q = ∫∫0.2r⁴(2)drdΦ
Q = ∫∫0.4r⁴drdΦ
Q = ∫0.4r⁴dr∫dΦ
Q = ∫0.4r⁴dr[Φ]
Q = ∫0.4r⁴dr[2π - 0]
Q = ∫0.4r⁴dr[2π]
Q = ∫0.8πr⁴dr
Q = 0.8π∫r⁴dr
Q = 0.8π[r⁵/5]
Q = 0.8π[(0.5 m)⁵/5 - (0 m)⁵/5]
Q = 0.8π[0.125 m⁵/5 - 0 m⁵/5]
Q = 0.8π[0.025 m⁵ - 0 m⁵]
Q = 0.8π[0.025 m⁵]
Q = (0.02π mC/m⁵) m⁵
Q = 0.0628 mC
Q = 0.0628 × 10⁻³ C
Q = 62.8 × 10⁻³ × 10⁻³ C
Q = 62.8 × 10⁻⁶ C
Q = 62.8 μC
A truck is hauling a 300-kg log out of a ditch using a winch attached to the back of the truck. Knowing the winch applies a constant force of 2850 N and the coefficient of kinetic friction between the ground and the log is 0.45, determine the time for the log to reach a speed of 0.5 m/s
Answer:
0.1 s
Explanation:
The net force on the log is F - f = ma where F = force due to winch = 2850 N, f = kinetic frictional force = μmg where μ = coefficient of kinetic friction between log and ground = 0.45, m = mass of log = 300 kg and g = acceleration due to gravity = 9.8 m/s² and a = acceleration of log
So F - f = ma
F - μmg = ma
F/m - μg = a
So, substituting the values of the variables into the equation, we have
a = F/m - μg
a = 2850 N/300 kg - 0.45 × 9.8 m/s²
a = 9.5 m/s² - 4.41 m/s²
a = 5.09 m/s²
Since acceleration, a = (v - u)/t where u = initial velocity of log = 0 m/s (since it was a rest before being pulled out of the ditch), v = final velocity of log = 0.5 m/s and t = time taken for the log to reach a speed of 0.5 m/s.
So, making t subject of the formula, we have
t = (v - u)/a
substituting the values of the variables into the equation, we have
t = (v - u)/a
t = (0.5 m/s - 0 m/s)/5.09 m/s²
t = 0.5 m/s ÷ 5.09 m/s²
t = 0.098 s
t ≅ 0.1 s
You swing a bat and hit a heavy box with a force of 1273 N. The force the box exerts on the bat is Group of answer choices less than 1273 N if the box moves. exactly 1273 N whether or not the box moves. None of the above choices are correct. exactly 1273 N only if the box does not move. greater than 1273 N if the bat bounces back. greater than 1273 N if the box moves.
Answer:
exactly 1273 N whether or not the box moves.
Explanation:
In the case when the bat is swing and it is hitted to a heavy box having a force of 1273 N so here the force of the box that exert on the box should be accurately 1273 N even if the box is moved or not. As the third law of the newton should be equivalent & the opposite reaction
Therefore as per the given situation, the above represent the answer
if p=2i+4j+3k and q=I+5j-2k,find P×q.
Answer:
[tex]p\times q=-23i+7j+6k[/tex]
Explanation:
We are given that
p=2i+4j+3k
q=i+5j-2k
We have to find pxq
We know that
[tex]p\times q=\begin{vmatrix} i&j &k\\ 2&4 & 3\\ 1& 5 & -2\end{vmatrix}[/tex]
[tex]p\times q=i(-8-15)-j(-4-3)+k(10-4)[/tex]
[tex]p\times q=-23i+7j+6k[/tex]
Hence,[tex]p\times q=-23i+7j+6k[/tex]
What is the relationship between organ systems and organs? organs are made from one type of organ system organ systems are made from one type of organ organs are made from different types of organ systems organ systems are made from different types of organs
A ball is thrown horizontally at a speed of 24 meters per second from the top of a cliff. If the ball hits the ground 6.0 seconds later, approximately how high is the cliff?
Answer:
144 meters
Explanation:
it takes 6 seconds to hit the ground right and the ball lays off 24 m per second .
so by the time the ball hits the ground 6 seconds passed. so that means the cliff is 6.0×24=144
Which of the following elements has the largest atomic radius?
Silicon
Aluminum
Sulfur
Phosphorous
Answer:
francium
Atomic radii vary in a predictable way across the periodic table. As can be seen in the figures below, the atomic radius increases from top to bottom in a group, and decreases from left to right across a period. Thus, helium is the smallest element, and francium is the largest.
An electric field is given by in units of N/C when is in meters. What is the potential difference from point B at (0,7) m to point A at (7,0) m
Complete Question
An electric field is given by E= (5x, 0, 0) in units of N/C when x is in meters. What is the potential difference VA - VB from point B at (0,7) m to point A at (7,0) m? V
Answer:
[tex]V_A-V_B=-122.5V[/tex]
Explanation:
From the question we are told that:
Position of point [tex]B=(0,7) m[/tex]
Position of point [tex]A=(7,0) m[/tex]
Generally the equation for pd across the points is mathematically given by
[tex]V_A-V_B=-\int_0^7(5x)d[/tex]
[tex]V_A-V_B=-[\frac{5x^2}{2}]_0^7[/tex]
[tex]V_A-V_B=-[\frac{5(7)^2}{2}][/tex]
[tex]V_A-V_B=-122.5V[/tex]
Two thin conducting plates, each 56.0 cm on a side, are situated parallel to one another and 7.0 mm apart. If 10^-10 electrons are moved from one plate to the other, what is the electric field between the plates?
Answer:
[tex]E=576.5V/m[/tex]
Explanation:
From the question we are told that:
Length [tex]l=56.0cm=0.56m[/tex]
Distance apart [tex]d=7.0mm=0.007m[/tex]
Electron Transferred [tex]n=10^{-10}[/tex]
Therefore
Total Charge
Since Charge on each electron is
[tex]e=1.602*10^{-19}[/tex]
Therefore
[tex]T=1.602*10^{-19} *10^{10}[/tex]
[tex]T=1.602*10^{-9}[/tex]
Generally the equation for Charge density is mathematically given by
[tex]\rho=T/A[/tex]
Where
Area
[tex]A=0.56*0.56[/tex]
[tex]A=0.3136[/tex]
Therefore
[tex]\rho=1.602*10^{-9}/0.3136[/tex]
[tex]\rho=5.10*10^{-9}[/tex]
Generally the equation for Electric Field in the capacitor is mathematically given by
[tex]E=\frac{\rho}{e_0}[/tex]
[tex]E=\frac{5.10*10^{-9}}{8.85x10{-12}}[/tex]
[tex]E=576.5V/m[/tex]
Given that o.2i+bj+o.4k is a unit vector,what is the value of b?
Answer:
b = 0.89
Explanation:
The given vector is, [tex]A=0.2i+bj+0.4k[/tex]
A is a unit vector
We need to find the value of b.
For a unit vector, |A| = 1
So,
[tex]0.2^2+b^2+0.4^2=1\\\\0.04+b^2+0.16=1\\\\0.2+b^2=1\\\\b^2=1-0.2\\\\b=0.89[/tex]
So, th value of b is 0.89.
Problem
A charged particle is moving in the presence of uniform magnetic field. The mass of the particle
is m = 10−6 kg its charge is Q = 10−5 C and the magnetic field vector is B~ = (1T, 0, 0). At the
beginning the velocity vector of the particle is ~v0 = (12 m/s, 0, 5 m/s).
a.) How large will the x component of the velocity of the particle be in t = 2 s?
b.) Where will the particle be in t = 3.14 s?
c.) How large will the magnitude of the velocity be in t = 2.5 s?
Answer:
Answer is a I checked the work
A locomotive pulls 11 identical freight cars. The force between the locomotive and the first car is 150.0 kN, and the acceleration of the train is 2 m/s2. There is no friction to consider. 1) Find the force between the tenth and eleventh cars. (Express your answer to two significant figures.)
Answer:
The force between the 10 th car and the 11 th car is 13636.4 N.
Explanation:
Force, F = 150 kN
acceleration, a = 2 m/s^2
Let the mass of each car is m. \Total numbers of cars = 11
F = n m a
150000 = 11 x m x 2
m = 6818.18 kg
The force between the 10 th and 11 th car is
T = ma = 6818.18 x 2 = 13636.4 N
you are given a set of facts regarding a lens : object heigh, and dostance to objects. Given this jnformation, how can you tell if you're dealing with a concave or convex lens
Answer:
concave curves inward like an hourglass and convex is an outward curve like a football
Explanation:
hope this helps
An empty 12,954 kg railroad car, traveling at a speed of 28 m/s strikes a partially filled 17,616 kg railroad car moving in the same direction at a speed of 5 m/s. What is the total momentum of the two railroad cars AFTER the collision?
Answer:
450792 kgm/s
Explanation:
by conservation of momentum,
total momentum AFTER collision = total momentum BEFORE collision
=mv+m'v'
=12954×28+17616×5
=450792 kgm/s
Two point charges exert a 6.10 N force on each other. What will the force become if the distance between them is increased by a factor of 8
Answer:
0.0953125 N
Explanation:
Applying,
F = kq'q/r²................. Equation 1
Where F = electrostatic force, k = coulomb's constant, q' and q = first and second charge respectively, r = distance between the charge.
From the equation,
If both charges remain constant,
Therefore,
F = C/r²
C = Constant = product of the two charge(q' and q) and k
Fr² = F'r'²................ Equation 2
From the question,
Given: F = 6.10 N
Assume: r = x m, r' = 8x
Substitute these value into equation 2
6.1(x²) = F'(8x)²
F' = 6.1/64
F' = 0.0953125 N
Hence the new force will become 0.0953125 N
1. Convert the following length into meters
a. 123.50mm
b. 560cm
c. 100dm
d. 125.89km
A 8.37*10^-5 F capacitor has 2.15*10^-4 C of charge on its plates. How much energy is stored on the capacitor
Answer:
2.76*10^-4
Explanation:
Trust me :)
Your job is to lift 30 kgkg crates a vertical distance of 0.90 mm from the ground onto the bed of a truck. For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of Force and power. Part A How many crates would you have to load onto the truck in one minute for the average power output you use to lift the crates to equal 0.50 hphp
Answer:
The number of crates is 84580.
Explanation:
mass, m = 30 kg
height, h = 0.9 mm
Power, P = 0.5 hp = 0.5 x 746 W = 373 W
time, t = 1 minute = 60 s
Let the number of crates is n.
Power is given by the rate of doing work.
[tex]P = \frac{n m gh}{t}\\\373 =\frac{n\times 30\times9.8\times 0.9\times 10^{-3}}{60}\\\\n =84580[/tex]
What is the friction force on a box that has a mass of 15kg as it slides across the floor. The coefficient of friction of the not very clean floor is 0.25
please explain everything including formula used
Answer:
36.75 N
Explanation:
Applying
F = mgμ................. Equation 1
Where F = Friction force on the box, m = mass of the box, g = acceleration due to gravity of the box, μ = coefficient of static friction
From the question,
Given: m = 15 kg, μ = 0.25
Constant: g = 9.8 m/s²
Substitute these values into equation 1
F = 15(9.8)(0.25)
F = 36.75 N
Hence the friction force on the box is 36.75 N
Help!!
A table is pushed across the floor for a distance of 32 m with a force of 320 N in 150 seconds. How much power was used?
A.70.2W
B.68.3W
C.56.7W
D.49.8W
Compute the work done on the table:
W = Fd = (320 N) (32 m) = 10,240 J
Divide this by the given time duration to get the power output:
P = W/∆t = (10,240 J) / (150 s) ≈ 63.3 W
what is the frequency of a wave related to
Answer:
Frequency is the number of complete oscillations or cycles or revolutions made in one second.
differentiate between step up and step down transformer
Answer:
The main difference between the step-up and step-down transformer is that the step-up transformer increases the output voltage, while the step-down transformer reduces the output voltage.
A hoop rolls with constant velocity and without sliding along level ground. Its rotational kinetic energy is:______a- half its translational kinetic energyb- the same as its translational kinetic energyc- twice its translational kinetic energyd- four times its translational kinetic energy
Answer:
The same as its translational KE.
The easy way to do this is to make up numbers and use them.
So, I'll say m=2 and r=3. I will also say v=3 .
Rot. Inertia of a hoop is mr^2. So the rot KE is: 1/2 (mr^2)(w^2)
note: (1/2*I*w^2)
Translational kinetic energy is basically normal KE, so 1/2(m)(v^2)
Now, lets plug our made up values in:
Rot Ke : 1/2 (9*2)(3/3) *note w = v/r
Tran Ke: 1/2(2)(9)
Rot Ke: 9
Tran Ke: 9
9=9, same.
explain why this is important for life on earth
Answer:
THIS is very important.
Explanation:
If the word "this" was never invented, people wouldn't have a way to tell another person what is directly in front of them.
BTW this is a joke.
A swimmer heading directly across a river that is 200 m wide reaches the opposite bank in 6 min 40 s. During this swim, she is swept downstream 480 m. How fast can she swim in still water
Answer:
The speed of the swimmer in stil water is 0.5 m/s
Explanation:
Given;
total time taken to swim across = 6 mins 40 s = (6 x 60s) + 40 s = 400 s
width of the river, = 200 m
Please find the image attached for explanation.
The cycle is a process that returns to its beginning, but it does not repeat
itself.
True
False
PLEASE ANSWR 1ST AND I WILL MARK U BRAINLIEST
Two statements are given- one labeled Assertion (A) and the other labeled Reason ®. Select
the correct answer to these questions from the codes (a), (b), (c) and (d) as given below:
a. Both A and R are true, and R is correct explanation of the assertion.
b. Both A and R are true, but R is not the correct explanation of the assertion.
c. A is true, but R is false.
d. A is false, but R is true.
Assertion: An object has a negative acceleration.
Reason: The velocity of an object decreases in the same direction.
Answer:
Where is the R statement?
Find the ratio of the diameter of copper to iron wire, if they have the same resistance per unit length (as they might in household wiring). dCu dFe =
Answer:
The ratio of diameter of copper wire to the iron wire is 0.42.
Explanation:
length of both the wires is same as L and resistance is R.
resistivity of copper = 1.7 x 10^-8 ohm m
resistivity of iron = 9.7 x 10^-8 ohm m
Let the diameter of copper is d and for iron is d'.
The formula of the resistance is
[tex]R = \rho\times\frac{L}{A}\\\\R = \rho\times\frac{4L}{\pi d^2}.... (1)\\And\\ R = \rho'\times\frac{4L}{\pi d'^2}.... (2)\\\\comparing (1) by (2)\\\\1.7\times10^{-8}\times\frac{4L}{\pi d^2}=9.7\times10^{-8}\times\frac{4L}{\pi d'^2}\\\\d : d' = 0.42[/tex]
A constant force moves an object along the line segment from to . Find the work done if the distance is measured in meters and the force in newtons.
This question is incomplete, the complete question is;
Flag
A constant force F = 6i+8j-6k moves an object along a straight line from point (6, 0, -10) to point (-6, 7, 2).
Find the work done if the distance is measured in meters and the magnitude of the force is measured in newtons.
Answer:
the work done is -88 J
Explanation:
Given the data in the question;
we know that;
Work done = F × S
where constant force F = ( 6i + 8j - 6k )
S = ( -6i + 7j + 2k ) - ( 6i + 0j - 10k )
S = ( (-6i - 6i) + (7j - 0j) + ( 2k - ( -10k) ) )
S = ( -12I + 7j + 12k )
so
Work force = ( 6i + 8j - 6k ) × ( -12I + 7j + 12k )
Work force = ( 6 × -12 ) + ( 8 × 7 ) + ( -6 × 12 )
Work force = -72 + 56 - 72
Work force = -88 J
Therefore, the work done is -88 J
A spring scale hung from the ceiling stretches by 6.1cm when a 2.0kg mass is hung from it. The 2.0kg mass is removed and replaced with a 2.8kg mass.What is the stretch of the spring?
assuming a filament in a 120W light bulb acts like a prefect blackbody, what is the temperature of the hottest portion of the filament if it has a surface area of 6.4×10^_5m^2. The stefan- boltzmann constant is 5.67×10^-8W/(m2.k2) A. 12OOk B. 2400K C. 2100K
Answer:
T = 2398 K
Explanation:
To calculate the emission of the light bulb we use the law is Stefan
P = σ A e T⁴
as they indicate that the filament is a black body, the emissivity is equal to 1 (e = 1)
T = [tex]\sqrt[4]{\frac{P}{ \sigma A} }[/tex]
let's calculate
T =[tex]\sqrt[4]{\frac{120}{5.67 \ 10^{-8} \ 6.4 \ 10^{-5}} }[/tex]
T = [tex]\sqrt[4]{33.06878 \ 10^{12} }[/tex]
T = 2,398 10³ K
T = 2398 K
