Answer:
(a) 1.5 nF, 1.2 nF, 1 nF
(b) 0.4 nF
Explanation:
V = 150 V
V' = 40 V, V'' = 50 V, V''' = 60 V, q = 6 x 10^-8 C
(a) C' = q/V' = 6 x 10^-8 / 40 = 1.5 x 10^-9 F
C'' = q/V'' = 6 x 10^-8 / 50 = 1.2 x 10^-9 F
C''' = q/V''' = 6 x 10^-8 / 60 = 1 x 10^-9 F
(b) The effective capacitance is
[tex]\frac{1}{C}=\frac{1}{C'}+\frac{1}{C''}+\frac{1}{C'''}\\\\\frac{1}{C}=\frac{10^9}{1.5}+\frac{10^9}{1.2}+\frac{10^9}{1}\\\\C = 0.4\times 10^{-9} F[/tex]
define regular body in science
Answer:
All the sides and inner angles of a regular form must be equal. The sides and angles of an irregular form aren't the same. An equilateral triangle, for example, is a regular form because all of its sides and angles are the same length.
OAmalOHopeO
Look at the distance-time graph below. It shows Angela's journey as she walks to the end of the road and back. The end of the road is 40 m away. After how many seconds did she arrive back where she started?
Answer:
Explanation:
If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.
Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.
How long did Angela take?The end of the road is 40m and coming back is also 40 m. The total distance is:
= 40 + 40
= 80m
The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.
Find out more uses of distance-time graphs at https://brainly.com/question/13877898.
#SPJ6
Which statement is correct about how the temperature of an object changes?
Group of answer choices
The molecules making up object collide with the molecules of the other and some of the potential energy from a cooler object is transferred to the warmer one.
The molecules making up object collide with the molecules of the other and some of the kinetic energy from a warmer object is transferred to the cooler one.
The molecules making up object collide with the molecules of the other and some of the kinetic energy from a cooler object is transferred to the warmer one.
The molecules making up object collide with the molecules of the other and some of the potential energy from a warmer object is transferred to the cooler one.
The molecules making up object collide with the molecules of the other and some of the kinetic energy from a warmer object is transferred to the cooler one.
Explain how two rolling bowling balls of different masses can have the same momentum
Knowing that the momentum(p) of an object is directly (when one number goes up the other will too) related to both the mass and velocity of an object or p=mv, two rolling bowling balls of different masses can have the same momentum because the one with the lower mass, has a higher velocity. The higher velocity of an object would make up for the lower mass and vice versa.
Answer:
Sample Response: Momentum is equal to the mass of an object multiplied by the velocity of an object. The two bowling balls can have the same momentum if the bowling ball with less mass has a higher velocity, and vice versa. As long as the product of the mass and velocity of one bowling ball is equal to the product of the mass and velocity of the other, the bowling balls will have the same momentum.
Explanation:
Richard rides a bike on a road sloping downward and inclined at an angle of 30° with the horizontal. If he moves at a constant speed of 10 meters/second, calculate his vertical downward velocity.
Answer:
[tex]v_y = 5\ m/s[/tex]
Explanation:
The vertical downward component of the speed of the bike can be simply found out by using the following geometric formula:
[tex]v_y = vSin\theta[/tex]
where,
[tex]v_y[/tex] = vertical downward component of speed = ?
v = speed = 10 m/s
θ = angle of slope = 30°
Therefore,
[tex]v_y = (10\ m/s)Sin\ 30^o\\v_y = 5\ m/s[/tex]
What is meant by measurement? l
Answer:
The action of measuring the size, length, or amount of something, as established is called measurement.
Explanation:
“Measurement” is the act of determining a target's size, length, weight, capacity, or other aspect. ... To use measurement tools as necessary. It is also appropriate to say that measurement is done by a worker using a measurement system, and instrumentation is done by a technician.
1. A rocket is forced forward by the ______ force of its engines, expelling gases out the rear of the rocket.
There are two forces acting on a rocket at the moment of lift off: Thrust pushes the rocket upwards by pushing gases downwards in the opposite direction.Weight is the force due to gravity pulling the rocket downwards towards the centre of the earth.So I'm thinking the answer is THRUST.
A ball of mass 0.3 kg is released from rest at a height of 8 m. How fast is it going when it hits the ground? (Gravity being equal to 9.8)
Answer:
Explanation:
Mass doesn't matter here because when something is falling, gravity plays fairly; an elephant falls at the same rate of acceleration as does a feather. What DOES matter is everything pertinent to the y-dimension of free-fall:
a = -9.8 m/s/s
v₀ = 0 (since the ball was held before it was dropped)
v = ??
Δx = -8 m (negative because the ball drops this far below the point from which it was released).
Putting all this together in one equation:
v² = v₀² + 2aΔx and filling in this equation:
v² = (0)² + 2(-9.8)(-8) and
v² = 156.8 so
v = 12.5 which rounds to 13 if you're using 2 sig figs, and rounds to 10 if you're only using 1 (which you should be, according to the way the numbers have been given in this problem)
According to the principle that the emission lines of a substance must be at exact same positions of its absorption spectrum, what substance accounts for the dark lines in the absorption spectrum
Answer:
The dark lines in absorption spectrum of light is due capacity of atoms to absorb light of a specific energy. The absorption of light by atoms occurs when the atom transitions from a lower energy or ground state to an excited high energy state, and it appears in the emission spectrum of the element as dark lines located in the same position as the bright lines
Explanation:
in a chemical equation, where do the products appear
Answer:
products would appear after the raw materials
Explanation:
raw material + raw material = product (anything deriving from combining two materials)
Having the correct posture and the degree or severity of braking, acceleration and steering inputs have a direct result on the ability of a motorist to effectively address changes in __________?
Answer: Vehicle Balance
Explanation:
Vehicle balance simply means how the weight of a vehicle is distributed across its tires which connects to the road
It should be noted that there'll be a shift in the balance of a vehicle when the braking, acceleration, or turning bring about a scenario in which the weight of th vehicle moves from one area to another.
a 2kg object is dropped from height of 10m. ignoring air resistance calculate:
1. mechanical energy of the object
2. kinetic energy of the object when it is 3m above the ground
Answer:
ME= 196.2 J
KE= 136.2
Explanation:
potential energy=mgh 2*9.81*10
Our ME is quivalent to PE as that is the toal amount of energy in the system
Kinetic energy= 1/2 m[tex]v^{2}[/tex]
to solve for kinetic enrgy we need to use a kinaetmtic equation that help us find velocity
vf= vi+at
but we need to find time first
d=vi+1/2(accelretaion)[tex]t^{2}[/tex]
7=0+1/2(9.81)[tex]t^{2}[/tex]
t= 1.19 s
vf= 0+ 9.81*1.19
vf= 11.67 m/s
Now
1/2 m[tex]v^{2}[/tex]
1/2*2*[tex]11.67^{2}[/tex]
= 136. 2
or we could just (PE/10)*7
so (196.2/10)*7
It takes 130 j of work to compress a certain spring 0.10m. (a) what is the force constant of this spring? To compress the spring an additional 0.10m, does it take 130
Answer:
Explanation:
The PE equation for a mass/spring system is
[tex]PE=\frac{1}{2}k[/tex]Δx² and filling in:
[tex]130=\frac{1}{2}k(.10)^2[/tex] and
[tex]k=\frac{2(130)}{(.10)^2}[/tex] so
k = 26000 N/m
If the displacement from equilibrium changes more, the PE needed to compress it will also change.
[tex]PE=\frac{1}{2}(26000)(.20)^2[/tex] gives us that
PE = 520J
If a planet has the same mass as the earth, but has twice the radius, how does the surface gravity, g, compare to g on the surface of the earth
Answer:
The surface gravity g of the planet is 1/4 of the surface gravity on earth.
Explanation:
Surface gravity is given by the following formula:
[tex]g=G\frac{m}{r^{2}}[/tex]
So the gravity of both the earth and the planet is written in terms of their own radius, so we get:
[tex]g_{E}=G\frac{m}{r_{E}^{2}}[/tex]
[tex]g_{P}=G\frac{m}{r_{P}^{2}}[/tex]
The problem tells us the radius of the planet is twice that of the radius on earth, so:
[tex]r_{P}=2r_{E}[/tex]
If we substituted that into the gravity of the planet equation we would end up with the following formula:
[tex]g_{P}=G\frac{m}{(2r_{E})^{2}}[/tex]
Which yields:
[tex]g_{P}=G\frac{m}{4r_{E}^{2}}[/tex]
So we can now compare the two gravities:
[tex]\frac{g_{P}}{g_{E}}=\frac{G\frac{m}{4r_{E}^{2}}}{G\frac{m}{r_{E}^{2}}}[/tex]
When simplifying the ratio we end up with:
[tex]\frac{g_{P}}{g_{E}}=\frac{1}{4}[/tex]
So the gravity acceleration on the surface of the planet is 1/4 of that on the surface of Earth.
Pls answer ASAP Which diagram shows a possible
sequence of steps in the research and development cycle? O A. New problem or discovery Engineering solution Development Research ОВ. Development Research Engineering solution New problem or discovery C. Research Development Engineering solution New problem or discovery OD. New problem or discovery Research Problem Engineering solution
Answer:
A. New problem or discovery Engineering solution Development Research Explanation:
A possible sequence of steps in the research and development cycle are A. New problem or discovery Engineering solution Development Research. In the research and development cycle, the first step is the problem that a scientist observe. After that we have discover a solution for that problem through many research so the above materials are the possible sequence of steps in the research and development cycle.
Gas to liquid with explanation on the basis of kinetic model and condensation point.
Answer:
Explanation:
1)Melting:
Melting is the process by which a substance changes from the solid phase to the liquid phase. ... Melting occurs when the internal energy of a solid increases, usually through the application of heat or pressure, such that the molecules become less ordered.
2) liquefication:
In physics and chemistry, the phase transitions from solid and gas to liquid (melting and condensation, respectively) may be referred to as liquefaction. The melting point (sometimes called liquefaction point) is the temperature and pressure at which a solid becomes a liquid.
3) vaporization:
Vaporization, conversion of a substance from the liquid or solid phase into the gaseous (vapour) phase. If conditions allow the formation of vapour bubbles within a liquid, the vaporization process is called boiling. Direct conversion from solid to vapour is called sublimation.
4) Sublimation occurs as molecules of a substance in the solid state go to the vapor state directly, rather than through the liquid state. ... ⭕In terms of the kinetic molecular theory, we know that molecules are in constant random motion, even when the substance is below the melting point.
how to Calculate the pressure on its base.
Answer:
p is =force x 10 whch is constant
can anyone help me with this?
the question : find the value of the resistors
Answer:
Value of the resistors R = 2 ohm
Explanation:
Given:
Resistor R1 = 4 ohm
Resistor R2 = 4 ohm
Find:
Value of the resistors R
Computation:
We know that Resistor R1 and Resistor R2 connected in parallel series.
So,
Using common resistance in parallel series
⇒ 1/R = 1/R1 + 1/R2
⇒ 1/R = 1/4 + 1/4
⇒ 1/R = (1 + 1) / 4
⇒ 1/R = 2/4
⇒ R = 4/2
⇒ R = 2
Value of the resistors R = 2 ohm
Naomi Osaka, a Japanese-African-American tennis player is the 2021 Australian Open Champion, and the first Asian tennis player in Women's Tennis Association (WTA) history to be ranked first in Singles. To celebrate her win, Naomi Osaka hits a ball into the stands at 40. m/s and at an angle 30.° above the horizontal. On its way down, the ball is caught by a spectator 12 m above the point where the ball was hit.
a) Calculate the time it takes the tennis ball to reach the spectator.
b) Calculate the ball's horizontal range (horizontal distance travelled).
Answer:
(a) t = 0.75 s
(b) d = 26 m
Explanation:
Height, h = 12 m
Angle, A = 30 degree
initial velocity, u = 40 m/s
(a) Let the time is t.
Use second equation of motion
[tex]h = u t + 0.5 at^2\\\\12 = 40 sin 30 t - 0.5 \times10 \times t^2\\\\12 = 20 t - 5 t^2\\\\5 t^2 - 20 t + 12 =0 \\\\t = \frac{20\pm \sqrt{400-240}}{10}\\\\t = \frac{20\pm 12.65}{10}\\\\t = 3.3 s, 0.75 s[/tex]
(b) d = u cos A t
d = 40 x cos 30 x 0.75 = 26 m
Does the colour of an object affect the rate of evaporation?
what is energy
and how it works?
Answer:
Energy is defined as the ability to do work.
Explanation:
Energy is a property that must be transferred to a body to perform work on the body. Energy can be found in many things and can take different forms.Energy is never lost, but it can be converted from one form to another.Fossil fuels are the largest sources of energy for energy generation.
The Earth orbits around the sun because the gravitational force that the sun
exerts on the Earth:
O A. causes Earth's acceleration toward the sun.
O B. is very small because the sun is so far from the Earth.
O c. is smaller than the force the Earth exerts on the sun.
O D. pushes the Earth away from the sun.
The Earth orbits around the sun because the gravitational force that the sun
exerts on the Earth:
O A. causes Earth's acceleration toward the sun.
O B. is very small because the sun is so far from the Earth.
O c. is smaller than the force the Earth exerts on the sun.
O D. pushes the Earth away from the sun.
Answer -:O A. causes Earth's acceleration toward the sun.
I hope this helps, have a nice time ahead!
A system of releases 125kJ of heat while 104kJ of work is done in the system. Calcilate the change om imternal energy (in kJ)
Answer:
DU = 21 KJ
Explanation:
Given the following data;
Quantity of heat = 125 KJ
Work = 104 KJ
To find the change in internal energy;
Mathematically, the change in internal energy of a system is given by the formula;
DU = Q - W
Where;
DU is the change in internal energy.
Q is the quantity of energy.
W is the work done.
Substituting into the formula, we have;
DU = 125 - 104
DU = 21 KJ
Which type of stress is most likely the cause of irritability?
eustress
O hypostress
O distress
O peripheral stress
Answer:
The correct answer is - distress.
Explanation:
Eustress is a type of stress that is beneficial to person and caused by adrenaline. Hypostress is a stress that is caused due to boredom or no work. It is stress comes with wasting the time.
Distress is the bad stress caused by anxiety, sadness, grief, and such type of stress that is caused irritability. Irritability is caused not just by stress but many factors.
According to Coulomb’s Law, what happens to the force when the distance increase between 2 particles?
Answer:
The size of the force varies inversely as the square of the distance between the two charges. Therefore, if the distance between the two charges is doubled, the attraction or repulsion becomes weaker, decreasing to one-fourth of the original value.
Explanation:
Coulomb’s law, mathematical description of the electric force between charged objects. Formulated by the 18th-century French physicist Charles-Augustin de Coulomb, it is analogous to Isaac Newton’s law of gravity.
Both gravitational and electric forces decrease with the square of the distance between the objects, and both forces act along a line between them. In Coulomb’s law, however, the magnitude and sign of the electric force are determined by the electric charge, rather than the mass, of an object. Thus, charge determines how electromagnetism influences the motion of charged objects. Charge is a basic property of matter. Every constituent of matter has an electric charge with a value that can be positive, negative, or zero.
Coulomb's Law says that the force between 2 charges is proportional to the product of the quantities of charge on each and inversely proportional to the square of the distance between them. The formula for Coulomb's Law is [tex]F=k\frac{q_{1}q_{2} }{r^{2} }[/tex].
[tex]F[/tex] is the force.
[tex]k[/tex] is the Coulomb's constant ([tex]8.987*10^{9} \frac{Nm^{2} }{C^{2} }[/tex]).
[tex]q_{1}[/tex] is the electric charge of object 1.
[tex]q_{2}[/tex] is the electric charge of object 2.
[tex]r[/tex] is the distance between the two charges.
Electric force is inversely proportional to ([tex]r^{2}[/tex]) instead of ([tex]r[/tex]). As the distance between charges increases, the electric force decreases by a factor of [tex]\frac{1}{r^{2} }[/tex].
a stone is projected horizontally with 20 m/a from top of a tall building. calculate it's position and velocity after 3s neglecting the air resistance
Answer:
1. 45 m
2. 50 m/s
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 20 m/s
Time (t) = 3 s
1. Determination of the position (i.e height)
Time (t) = 3 s
Acceleration due to gravity (g) = 10 m/s²
Height (h) =?
h = ½gt²
h = ½ × 10 × 3²
h = 5 × 9
h = 45 m
2. Determination of the velocity.
Initial velocity (u) = 20 m/s
Time (t) = 3 s
Acceleration due to gravity (g) = 10 m/s²
Velocity (v) =?
v = u + gt
v = 20 + (10 × 3)
v = 20 + 30
v = 50 m/s
What does the temperature of the gas between galaxies in galaxy clusters tell us about the mass of the cluster
Answer:
HEY THERE!
Explanation:
The temperature tells us the average speeds of the gas particles, which are held in the cluster by gravity, so we can use these speeds to determine the cluster mass
HAVE A GOOD DAY!
100 g of water are cooled and the enthalpy change is -12,540 J. What is the change in temperature of the water?
Answer:
-29.9907
Explanation:
c = Q / (mΔT)
You're looking for ΔT, so you would plug in what you already know and get C= -12540/(100 x ΔT)
then you would solve
A bicycle and a car start their journey at the same time the cyclist reaches it's top speed of 10mls in 15 the car reaches a speed if 15 MLS in55 which has the greater acceleration the car or the bicycle
Complete question is;
A bicycle and a car start their journey at the same time the cyclist reaches it's top speed of 10m/s in 15 s, the car reaches a speed of 15 m/s in 55 s. which has the greater acceleration the car or the bicycle.
Answer:
The bicycle has the greater acceleration.
Explanation:
Cyclist reaches a top speed of 10m/s in 15 s.
Formula for acceleration here is;
a = v/t
a = 10/15
a = 0.67 m/s²
Car reaches a speed of 15 m/s in 55 s.
Thus;
a = 15/55
a = 0.27 m/s²
From the 2 acceleration values gotten, we can say that;
The bicycle has the greater acceleration.
The material that would eventually make all the major bodies in our solar system first gathered together as smaller pieces which astronomers call:
Answer:
The answer is "planetesimals".
Explanation:
The uncountable little corpses of the accreted gas and dust were supposed to orbit the Sun while the planets were formed. The theory explaining the creation of the solar system as a whole is termed the quark-gluon plasma hypothesis.
An object produced by dust, rock, and other materials is called a planetesimal. This word is rooted throughout the microscopic idea, which shows that an object is too small to observe or quantify. Everywhere from many meters to hundreds of kilometers asteroids may acquire size.
