Answer:
the radius of the bigger loop is 5 cm.
Explanation:
Given;
current in the smaller loop, I₁ = 12 A
current in the larger loop, I₂ = 20 A
radius of the smaller loop, r₁ = 3 cm
let the radius of the larger loop, = r₂
Apply Biot-Savart's law to determine the magnetic field at the center of the circular loops.
[tex]B= \frac{\mu_0 I}{2r}[/tex]
The magnetic field at the center of the smaller loop;
[tex]B_1 = \frac{\mu_0 I_1}{2 r_1}[/tex]
The magnetic field at the center of the bigger loop;
[tex]B_2 = \frac{\mu_0 I_2}{2 r_2}[/tex]
If the magnetic field at the center is zero, then B₁ = B₂
[tex]B_1 = B_2 = \frac{\mu_0 I_1}{2 r_1} = \frac{\mu_0 I_2}{2 r_2} \\\\\frac{I_1}{ r_1} = \frac{ I_2}{r_2} \\\\r_2 = \frac{I_2 r_1}{ I_1} = \frac{(20 \ A) \times (3.0 \ cm)}{12 \ A} = 5 \ cm[/tex]
Therefore, the radius of the bigger loop is 5 cm.
list the factors that affecting frictional force ?
Answer:
The frictional force between two bodies depends mainly on three factors: (I) the adhesion between body surfaces (ii) roughness of the surface (iii) deformation of bodies
Which wave has the smallest amplitude?
I will give brainliest to the right answer.
Wave-D (the red one) has the smallest amplitude of the 4 waves on this graph.
Set the initial bead height to 3.00 m. Click Play. Notice that the ball makes an entire loop. What is the minimum height required for the ball to make an entire loop
Answer:
h> 2R
Explanation:
For this exercise let's use the conservation of energy relations
starting point. Before releasing the ball
Em₀ = U = m g h
Final point. In the highest part of the loop
Em_f = K + U = ½ m v² + ½ I w² + m g (2R)
where R is the radius of the curl, we are considering the ball as a point body.
I = m R²
v = w R
we substitute
Em_f = ½ m v² + ½ m R² (v/R) ² + 2 m g R
em_f = m v² + 2 m g R
Energy is conserved
Emo = Em_f
mgh = m v² + 2m g R
h = v² / g + 2R
The lowest velocity that the ball can have at the top of the loop is v> 0
h> 2R
i need help..........
Answer:
I hope this will help you. i tried my best
Physics question plz help
Answer:
B. [tex]30\,s\,< t \le 40\,s[/tex].
Explanation:
The vehicle is travelling eastwards when its velocity is positive and westwards when velocity is negative. According to the graph, [tex]v > 0[/tex] for [tex]30\,s\,< t \le 40\,s[/tex]. Hence, correct answer is B.
A baseball pitcher throws a fastball by spinning his arm at 27.7m/s. The ball has a mass of 0.700kg and experiences a net centripetal force of 625N. How long is the pitchers arm (the radius of the curve)?
In the historical sense, postmodern society is simply a society that occurs after the modern society. ... Many of the elements of a society like this are reactions to what the modern society stood for: industrialism, rapid urban expansion, and rejection of many past principles.
A spring of stiffness 11000 N/m is connected to a wall. The other end is attached to a block of mass 2 kg. A second spring of stiffness 12200 N/m extends between the first block and a second block of mass 2 kg. You are holding the second block with 300 N of force and everything is motionless.
Required:
How stretched is the spring connecting the first block to the wall?
Answer:
Explanation:
Let the stretch produced in first spring and second spring be x₁ and x₂ respectively. 300 N is the restoring force created in them .
k₁x₁ = k₂x₂ = 300 N .
k₁ = 11000 N/m
11000 x₁ = 300N
x₁ = 300 N / 11000
= 0.027 m
= 2.7 cm .
4. Describe (in words) the relationship between the distance and time2 as the duster accelerated down the slope, 4.1 with its rough surface in contact with the track
Direct relation is present between distance and time which means one has direct impact on the value of other.
There is direct relationship between distance and time. Direct relation means if one increases the other automatically increases while on the other hand, if one decreases the other will also decreases. If there is a large amount of distance so more time is required to pass it while on the other hand, if there is less distance so less time is required to complete it so we can conclude that there is direct relationship between distance and time.
https://brainly.com/question/24323600
1L of a solution of oxalic acid [(). ] contains 2.52g of acid.
Calculate the molarity of the solution.
Answer:
0.028 M.
Explanation:
NOTE: This question is a chemistry question. However, the answer to the question can be obtained as shown below:
We'll begin by calculating the number of mole in 2.52 g of oxalic acid, C₂H₂O₄. This can be obtained as follow:
Mass of C₂H₂O₄ = 2.52 g
Molar mass of C₂H₂O₄ = (2×12) + (2×1) + (4×16)
= 24 + 2 + 64
= 90 g/mol
Mole of C₂H₂O₄ =?
Mole = mass / molar mass
Mole of C₂H₂O₄ = 2.52 / 90
Mole of C₂H₂O₄ = 0.028 mole
Finally, we shall determine the molarity of the solution. This can be obtained as follow:
Mole of C₂H₂O₄ = 0.028 mole
Volume = 1 L
Molarity =?
Molarity = mole / Volume
Molarity = 0.028 / 1
Molarity = 0.028 M
Therefore, the molarity of the solution is 0.028 M.
Which of the following careers would physicists be least qualified to perform,
based on their training?
A. Artist
B. Mechanical engineer
C. Laser designer
D. Power plant engineer
what is threshold of hearing?
-> The minimum sound pressure level at which a sound of a given frequency can be perceived by the human ear is known as threshold of hearing.
Explanation:
The absolute threshold of hearing is the minimum sound level of a pure tone that an average human ear with normal hearing can hear with no other sound present. The absolute threshold relates to the sound that can just be heard by the organism.
On a cello, the string with the largest linear density (1.44 x 10-2 kg/m) is the C string. This string produces a fundamental frequency of 93.0 Hz and has a length of 0.834 m between the two fixed ends. Find the tension in the string.
Answer:
[tex]T=346.5N[/tex]
Explanation:
From the question we are told that:
Density [tex]\rho= (1.44 * 10^{-2} kg/m)[/tex]
Frequency[tex]F=93.0Hz[/tex]
Length[tex]l=0.834m[/tex]
Generally the equation for Frequency is mathematically given by
[tex]F=\frac{1}{2 l}sqrt{\frac{T}{\rho}}[/tex]
Therefore
[tex]T=\rho(2 lF)^2[/tex]
[tex]T= (1.44 * 10^{-2}*(2*0.834)(93.0))^2[/tex]
[tex]T=346.5N[/tex]
In a physics lab, light with a wavelength of 560 nm travels in air from a laser to a photocell in a time of 17.2 ns . When a slab of glass with a thickness of 0.810 m is placed in the light beam, with the beam incident along the normal to the parallel faces of the slab, it takes the light a time of 20.8 ns to travel from the laser to the photocell.
Required:
What is the wavelength of the light in the glass?
Answer:
Distance traveled = 3 * 10E8 * 17.2 * 10E-9 = 5.16 m
.81 / 3 * 10E8 = 2.7 * 10E-9 normal time thru glass
(20.8 - 17.2) * E10-9 = 3.6 * 10E-9 additional time due to glass
c tg = c n ta where tg and ta are the times spent in glass and air
(Note you can also write Va = n Vg or D / ta = n D / tg)
n = tg / ta = 3.6 / 2.7 = 1.33 the index of refraction of the glass
Wavelength (air) = Wavelength (glass) * n
Wavelenght = 560 nm / 1.33 = 421 nm
This percentage of all water on the planet is salt water . 97 % 95% 93% 91%
hurry please !
Answer:
none of those are right, its technically 96.5%. so i would say 97% is your best bet because thats closest and it just rounds up :)
Explanation:
Consider two oppositely charged, parallel metal plates. The plates are square with sides L and carry charges Q and -Q. What is the magnitude of the electric field in the region between the plates
Answer:
E = [tex]\frac{Q}{L^2 \epsilon_o}[/tex]
Explanation:
For this exercise we use that the electric field is a vector, so the resulting field is
E_total = E₁ + E₂ (1)
since the field has the same direction in the space between the planes
Let's use Gauss's law for the electric field of each plate
Let's use a Gaussian surface that is a cylinder with the base parallel to the plate, therefore the normal to the surface and the field lines are parallel and the angle is zero so cos 0 = 1
Ф = ∫ .dA = [tex]q_{int}[/tex] /ε₀
if we assume that the charge is uniformly distributed on the plate we can define a charge density
σ = q_{int} A
as the field exists on both sides of the plate on the inside
E A = A σ / 2ε₀
E = σ / 2ε₀
we substitute in equation 1
E = σ /ε₀
for the complete plate
σ = Q / A = Q / L²
we substitute
E = [tex]\frac{Q}{L^2 \epsilon_o}[/tex]
Which best describes what occurs when an object takes in a wave as the wave hits it?
A. transmission
B. absorption
C. reflection
D. refraction
Answer:
B
Explanation:
ABSORPTION
Compare and contrast how sound waves behave when they
encounter solid hard surfaces
encounter soft surfaces
pass through an opening
encounter a barrier
Answer:
They sound tinkling in solid hard like metal.
They can vibrate soft surface
I could just Ans this
The following are ways to properly manage your stress except
Answer:
you should provide the options for us to answer?
write a note on unity of ant
Answer: When a pathogen enters their colony, ants change their behavior to avoid the outbreak of disease. In this way, they protect the queen, brood and young workers from becoming ill. These results, from a study carried out in collaboration between the groups of Sylvia Cremer at the Institute of Science and Technology Austria (IST Austria) and of Laurent Keller at the University of Lausanne, are published today in the journal Science.
Explanation: search for it.
After a successful experiment involving the Sun, an astrophysicist proposes a theory for how stars change during the course of their existence. Is the astrophysicist correct in doing this
Answer:
Yes
Explanation:
A scientific theory is an explanation of a natural phenomenon based on available facts. If an Astrophysicist (a scientist who studies the universe and its celestial constituents) performs several successful experiments about a natural body like the sun and tests the results of his experiment using the principles of maths and physics and they come out as true, then he can propose a scientific theory based on his findings.
Unlike a scientific law that simply states a fact, a scientific theory provides evidence and explanation to support the facts.
Two wires are made of the same material and have the same length but different radii. They are joined end-to- end and a potential difference is maintained across the combination. Of the following quantities that is same for both wires is
A. Potential difference
B. Electric current
C. Current density
D. Electric field
Answer:
Current
I think The choose (B)
B. Electric current
Hellohellp fastttttttttt
Answer:
Explanation:
[tex]w_f^2=w_o^2-2\alpha\theta\\\\0=w_o^2-2\alpha\theta\\\\\theta={w_o^2\over{2\alpha}}[/tex]
[tex]w_o=2\pif=2\pi*8Hz=16\pi{rad\over{s}}\\\\\alpha=2.2{rad\over{s^2}}\\\\\theta={(16\pi{rad\over{s}})^2\over{2*2.2{rad\over{s^2}}}}=574.23rad[/tex]
[tex]revolutions={\theta\over{2\pi}}={574.23\over{2\pi}}=91.39[/tex]
A stone dropped from the top of a 80m high building strikes the ground at 40 m/s after falling for 4 seconds. The stone's potential energy with respect to the ground is equal to its kinetic energy … (use g = 10 m/s 2)
A) at the moment of impact.
B) 2 seconds after the stone is released.
C) after the stone has fallen 40 m.
D) when the stone is moving at 20 m/s.
At the moment of impact both Kinetic Energy and Potential Energy should be 0, right? So it can't be A), right? Or is this wrong? Is it indeed A)? Please show work and explain it well.
Answer: c. 40m
Explanation:
See picture
Wind instruments like trumpets and saxophones work on the same principle as the "tube closed on one end" that we examined in our last experiment. What effect would it have on the pitch of a saxophone if you take it from inside your house (at 76 degrees F) to the outside on a cold day when the outside temperature is 45 degrees F ?
Answer:
f = v / 4L
the frequency of the instruments is reduced by the decrease in the speed of the wave with the temperature.
Explanation:
In wind instruments the wave speed must meet
v = λ f
λ = v / f
from v is the speed of sound that depends on the temperature
v = v₀ [tex]\sqrt{1+ \frac{T [C]}{273} }[/tex]
where I saw the speed of sound at 0ºC v₀ = 331 m/s the temperature is in degrees centigrade, we can take the degrees Fahrenheit to centigrade with the relation
(F -32) 5/9 = C
76ºF = 24.4ºC
45ºF = 7.2ºC
With this relationship we can see that the speed of sound is significantly reduced when leaving the house to the outside
at T₁ = 24ºC v₁ = 342.9 m / s
at T₂ = 7ºC v₂ = 339.7 m / s
To satisfy this speed the wavelength of the sound must be reduced, so the resonant frequencies change
λ / 4 = L
λ= 4L
v / f = 4L
f = v / 4L
Therefore, the frequency of the instruments is reduced by the decrease in the speed of the wave with the temperature.
A charged particle of mass 0.0040 kg is subjected to a magnetic field which acts at a right angle to its motion. If the particle moves in a circle of radius at a speed of what is the magnitude of the charge on the particle
Complete Question
A charged particle of mass 0.0040 kg is subjected to a 40-T magnetic field which acts at a right angle to its motion. If the particle moves in a circle of radius 0.10 m at a speed of 20m/s, what is the magnitude of the charge on the particle?
Answer:
[tex]q=0.020C[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=0.004kg[/tex]
Magnetic field [tex]B=40-T[/tex]
Radius [tex]r=0.10m[/tex]
Speed [tex]v= 20m/s[/tex]
Generally the equation for Radius of a circular path is mathematically given by
[tex]r=\frac{p}{qB}[/tex]
Where
[tex]p=mv[/tex]
Therefore
[tex]q=\frac{mv}{rB}[/tex]
[tex]q=\frac{0.004kg*20m/s}{0.1*40}[/tex]
[tex]q=0.020C[/tex]
I NEED HELP ASAP!!!
which of the following causes the magnetic force between the magnet and the scrap metal?
Answer:
Alternating current at which when entered into the loop cause it to magnetize
What is the rate of power flowing through phone if a 2.50V battery produces 1.50A of current?
Answer:
3.75 watts
Explanation:
power = volts * current
2.5 * 1.5 =
3.75
Can a conductor be given limitless charge
Answer:
No
Explanation:
You could try to give it enough to fill all valence electrons in all of the atoms in the conductor, but practically this could not be achieved.
A denser object will usually have a ____ index of
refraction.
Answer:
A denser object will usually have a high index of
refraction.
A denser object will usually have a high index of refraction.
What is index of refraction?The refractive index is the ratio of the speed of light in vacuum and speed of light in any medium.
n = c/v
The density is greater for the denser medium (water, oil, mercury, etc) then the rarer medium (any gas or air).
When a light ray travels through denser medium, its velocity is reduced and the refracted ray bends towards normal.
As, the index of refraction is inversely proportional to the velocity of light in the medium, index of refraction will be high for denser object.
Thus, denser object have high index of refraction.
Learn more about index of refraction.
https://brainly.com/question/23750645
#SPJ2
Automobile A and B are initially 30 m apart travelling in adjacent highway lanes at speeds VA = 14.4 km/hr., VB 23.4 km/hr. at t = 0.0. Knowing that automobile A has a constant acceleration of 0.8 m/s? and automobile B has a constant deceleration of 0.4 m/s2. Automobile A will overtake B after traveling a distance SA: A B. Side view
Answer:
x = 240 m
Explanation:
This is a kinematics exercise
Let's fix our frame of reference on car A
x = x₀ₐ+ v₀ₐ t + ½ aₐ t²
the initial position of car a is zero
x = 0 + v₀ₐ t + ½ 0.8 t²
for car B
x = x_{ob} + v_{ob} t - ½ a_b t²
car B's starting position is 30 m
x = 30 + v_{ob} t - ½ 0.4 t²
at the point where they meet, the position of the two vehicles is the same
0 + v₀ₐ t + ½ 0.8 t² = 30 + v_{ob} t - ½ 0.4 t²
let's reduce the speeds to the SI system
v₀ₐ = 14.4 km / h (1000 m / 1 km) (1h / 3600s) = 4 m / s
v_{ob} = 23.4 km / h = 6.5 m / s
4 t + 0.4 t² = 30 + 6.5 t - 0.2 t²
0.2 t² - 2.5 t - 30 = 0
t² - 12.5 t - 150 = 0
we solve the quadratic equation
t = [tex]\frac{12.5 \pm \sqrt{12.5^2 + 4 \ 150} }{2}[/tex]
t = [tex]\frac{12.5 \ \pm 27.5}{2}[/tex]
t₁ = 20 s
t₂ = -7.5 s
time must be a positive quantity so the correct result is t = 20 s
let's look for the distance
x = 4 t + ½ 0.8 t²
x = 4 20 + ½ 0.8 20²
x = 240 m
