Answer:
CG gh sure er go b vh pxuh FPI OO c AM h kh
Mike lives in the northern United States minnesota and nick lives in the southern United States Louisiana. When they both feel insulted by the same individual, nick will be more
Complete question is;
Mike lives in the northern United States (in Minnesota) and Nick lives in the southern United States (Louisiana). When they both feel insulted by the same individual, Nick will be more likely to have a(n) ________ cortisol response and show ________ levels of physical aggression.
Answer:
- A hyper cortisol response
- higher levels of physical aggression
Explanation:
In study of hormones in the human body, it has been discovered that cortisol is a stress inducing hormone. Now, if they are in the summer when it is hot, it has been proven that's when the cortisol hormone circulates in a very large manner in the blood. This leads to frustration and as well possibly physical aggression.
Nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
What is cortisol?Cortisol has been identified as a stress-inducing hormone in studies of hormones in the human body.
Mike lives in the northern United States (in Minnesota) and Nick lives in the southern United States (Louisiana).
When they both feel insulted by the same individual, Nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
Cushing syndrome is a condition characterized by elevated cortisol levels. This disorder is caused by your body producing too much cortisol.
Similar symptoms can occur after large doses of corticosteroids, thus this should be cleared out before testing for crushing syndrome.
Cortisol has been identified as a stress-inducing hormone in studies of hormones in the human body. Now, if they are in the summer when it is hot.
It has been proved that the cortisol hormone circulates in the blood in a very significant amount. This causes irritation and, in some cases, physical aggressiveness.
Hence nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
To learn more about cortisol refer to the link
https://brainly.com/question/7519944
Imagine using brainly LOL COULDNT BE ME XD
Answer:
LOL! couldnt be me either bestieeeee
Answer:
-_-
Explanation:
i dont know What was XD??
1. How much heat energy ( Q ) is required to heat 2.0 kg of copper from 30.0 oC to 80.0 oC?
Answer:
Heat capacity, Q = 38500 Joules
Explanation:
Given the following data;
Mass = 2 kg
Initial temperature, T1 = 30°C
Final temperature, T2 = 80°C
Specific heat capacity of copper = 385 J/Kg°C
To find the quantity of heat required;
Mathematically, heat capacity is given by the formula;
[tex] Q = mcdt [/tex]
Where;
Q represents the heat capacity or quantity of heat.
M represents the mass of an object.
C represents the specific heat capacity of water.
dt represents the change in temperature.
dt = T2 - T1
dt = 80 - 30
dt = 50°C
Substituting the values into the formula, we have;
[tex] Q = 2 * 385*50[/tex]
Heat capacity, Q = 38500 Joules
16 100 g of water at 25 °C is poured into an insulating cup. 50 g of ice at 0 °C is added to the water.
The water is stirred until the temperature of the water has fallen to 0°C.
18 g of ice remains unmelted.
The specific heat capacity of water is 4.2 J /g °C.
Which value does this experiment give for the specific latent heat of fusion of ice?
Answer:
Q = Q
mcT = ml
100 x 4.2 x 25 = (50-18) l
l = 328
*Hope it helps*
The specific latent heat of fusion of the melted ice is 328.13 J/kg.
Conservation of energy
The specific latent heat of fusion of the melted ice is determined by applying the principle of conservation of energy as shown below;
Heat lost by the water = Heat gained by the ice
McΔθ = mL
where;
c is specific heat capacity of waterL is pecific latent heat of fusion of icem is mass of melted ice = 50 g - 18 g = 32 g(100)(4.2)(25) = (32)L
32L = 10500
L = 328.13 J/kg
Thus, the specific latent heat of fusion of the melted ice is 328.13 J/kg.
Learn more about heat capacity here: https://brainly.com/question/16559442
How would you find the resistance of a parallel circuit with n identical resistors?
9514 1404 393
Answer:
R/n
Explanation:
For a given voltage V across each resistor R, the current is V/R. Since there are n parallel paths, the total current is n(V/R). The effective resistance is ...
Reff = V/I = V/(nV/R)
Reff = R/n
What is the difference between heat capacity and specific heat capacity? I want the meaning please.
Answer:
The heat capacity of a body is defined as the heat required to raise it's temperature by me degree or one kelvin.while specific heat capacity of a substance is defined as the heat required to the temperature of a unit mass of it through one degree or one kelvin.
I hope it helps
what is the effect of pressure on boiling and melting substance?
Answer:
The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.
The Indianapolis speedway consists of a 2.5 mile track having four turns, each 0.25 mile long and banked at 9 12'
Answer: Your question is missing below is the question
Question : What is the no-friction needed speed (in m/s ) for these turns?
answer:
20.1 m/s
Explanation:
2.5 mile track
number of turns = 4
length of each turn = 0.25 mile
banked at 9 12'
Determine the no-friction needed speed
First step : calculate the value of R
2πR / 4 = πR / 2
note : πR / 2 = 0.25 mile
∴ R = ( 0.25 * 2 ) / π
= 0.159 mile ≈ 256 m
Finally no-friction needed speed
tan θ = v^2 / gR
∴ v^2 = gR * tan θ
v = √9.81 * 256 * tan(9.2°) = 20.1 m/s
A sample of nitrogen gas is inside a sealed container. The volume of the container decreases while the temperature is kept constant. This is a ________ process.
a) isothermal
b) constant-volume
c) adiabatic
d) isobaric
A car moves 20 km towards the North and then 35 km at an angle of 60o towards west of North. Its magnitude of displacement from the initial position will be
Answer:
15
Explanation:
displacement = initial position - final position
A basketball is shot by a player at a height of 2.0 m. The initial angle
was 53° above horizontal. At the highest point the ball was travelling 6
m/s. If he scored (the ball went through the rim that is 3.00 m above the
ground), what was the player’s horizontal distance from the basket?
Answer:
The answer is "8.28 m".
Explanation:
[tex]\to u \cos 53^{\circ}=6 \ \text{therefore the horizontal velocity is constant alaways}\\\\\therefore[/tex]
[tex]u= \frac{6 \times 5}{3}= \frac{30}{3}= 10\ \frac{m}{s}\\\\[/tex]
In the projectfile when vertical displacement is 1 then 5 m comes at farther sides
Using
[tex]S=ut-\frac{1}{2} gt^2\\\\1=u\sin 53^{\circ}\times t-5t^2\\\\1=8t-5t^2\\\\5t^2-8t+1=0\\\\ t=\frac{8\pm \sqrt{64-20}}{10} \\\\=\frac{8\pm 2\sqrt{11}}{10} \\\\t_2=\frac{8+2\sqrt{11}}{10} \\\\[/tex]
[tex]Distance=u \cos 53^{\circ}\times t_2\\\\[/tex]
[tex]=6 \times \frac{8\pm 2\sqrt{11}}{10} \\\\=\frac{24\pm 6\sqrt{11}}{5} \\\\= 8.28 \ m[/tex]
If the density of a substance is 5g/cm3 and the volume is 10cm3,
determine the mass.
Answer:
(5g/cm³)*(10cm³) = 50g
Explanation:
This is just a conversion formula. Easy to find using dimensional analysis.
(5g/cm³)*(10cm³) = 50g
Answer:
[tex]\boxed {\boxed {\sf 50 \ grams}}[/tex]
Explanation:
Density is the amount of mass per unit volume, so the formula is:
[tex]d = \frac{m}{v}[/tex]
The density of the substance is 5 grams per cubic centimeter and the volume is 10 cubic centimeters.
d= 5 g/cm³ v= 10 cm³Substitute the values into the formula.
[tex]5 g/cm^3 = \frac{m}{10 \ cm^3}[/tex]
We are solving for the mass, so we have to isolate the variable m. It is being divided by 10 cubic centimeters. The inverse of division is multiplication, so we multiply both sides of the equation by 10 cm³.
[tex]10 \ cm^3 *5 g/cm^3 = \frac{m}{10 \ cm^3} * 10 \ cm^3[/tex]
[tex]10 \ cm^3 *5 g/cm^3 = m[/tex]
The units of cubic centimeters (cm³) cancel.
[tex]10 *5 g = m[/tex]
[tex]50 \ g=m[/tex]
The mass of the substance is 50 grams.
A small emergency generator supplies 432 000 000 J of electrical energy in twenty-four hours. What is the average power output of the generator?
Answer:
P = 5 kW
Explanation:
Given that,
Electrical energy = 432 000 000 J
Time, t = 24 h = 86400 s
We need to find the power output of the generator. We know that,
Power = work done/time
So,
[tex]P=\dfrac{432 000 000}{86400}\\\\P=5000\ W[/tex]
or
P = 5 kW
So, the power output of the generator is 5 kW.
The primary circuit of a transformer has a voltage of 80 V and 300 windings. The secondary circuit has a voltage of 240. How many windings are there in the secondary circuit? *
Answer:
900 windings
Explanation:
Applying,
Vs/Vp = Ns/Np............. Equation 1
Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit
make Ns the subject of the equation
Ns = VsNp/Vp........... Equation 2
From the question,
Given: Vs = 240 V, Np = 300 windings, Vp = 80 V
Substitute these values into equation 2
Ns = (240×300)/80
Ns = 900 windings
is the answer correct or wrong
Answer:
wrong answer because m=100
Explanation:
I think it is incorrect
Ah, I tried
Một con lắc là xo treo thẳng đứng có độ cứng 30 N/m và vật nặng có khối lượng 320 g. Kích thích dễ cho quá nặng dao động điều hoà theo phương thẳng đứng xung quanh vị trí cân bằng với biên độ 6 cm. Lấy g = 10m/s. Độ lớn lực kéo lớn nhất của là xa liễn điểm treo trong quá trình quả nặng dao động là
Answer:
The maximum force is 1.8 N.
Explanation:
A pendulum is a vertically hanging spring with a stiffness of 30 N/m and a mass of 320 g. The excitable excitation oscillates vertically around the equilibrium position with an amplitude of 6 cm. Take g = 10m/s. The magnitude of the maximum pulling force of the distance from the suspension point during the oscillation of the weight is
stiffness, K = 30 n/m
mass, m = 320 g
amplitude, A = 6 cm = 0.06 m
g = 10 m/s^2
Let the maximum acceleration is a.
[tex]a = w^2 A\\\\a = \frac{K}{m}A\\\\Force, F = m a \\\\F = K A\\\\F = 30 \times 0.06 \\\\F = 1.8 N[/tex]
what mean by expansion effect of heat
Answer:
Explanation:
-Cambio de temperatura
Al calentar un cuerpo la temperatura aumenta
Es el efecto más inmediato del calor, el aumento de la temperatura. Al calentar un cuerpo, es habitual, aunque no siempre, que el cuerpo aumente de temperatura. El aumento dependerá de la cantidad de calor que se suministra, del tipo de sustancia y de su cantidad.
-Dilatación
Cuando un objeto se calienta, su volumen aumenta. Este fenómeno se llama dilatación térmica. Por el contrario, cuando un objeto se enfría, su volumen disminuye, debido a la contracción térmica.
Cuando se calienta un cuerpo, además de cambiar de estado o variar su temperatura, también cambia su tamaño, se dilata.
Por ejemplo, los puentes no se construyen de una única pieza, sino que suelen presentar uno o varios cortes longitudinales, las llamadas juntas de dilatación. Si no existieran esas juntas, los cambios de longitud del puente entre el invierno y el verano o entre el día y la noche acabarían por romperlo.
La dilatación de un cuerpo dependerá del aumento de temperatura que experimente, de su tamaño y de la sustancia de que esté hecho. Cuanto más aumente la temperatura más aumentará su tamaño, lo mismo que cuanto mayor sea, mayor se hará.
Todos los cuerpos, ya sean sólidos, líquidos o gaseosos, varían su tamaño cuando intercambian calor con otro cuerpo.
-Cambios de estado:
Si una sustancia modifica el estado de sólido, líquido o gaseoso, se produce un cambio de estado. Un cambio de estado es una modificación en la forma en que se disponen las partículas que constituyen una sustancia.
El estado en que se encuentre un cuerpo depende de la presión a la que está sometido y de su temperatura. Para cambiar su estado se debe modificar alguna de estas variables, o ambas. Al elevar la temperatura de una sustancia sólida, aumenta la agitación de sus partículas.
Answer:
All forms of matter (solid, liquid and gas) undergo expansion on heating. When a solid is heated, the atoms gain energy and vibrate more vigorously. This results in the expansion of the solid. For a given change in temperature, the extent of expansion is smaller in solids than in liquids and gases. This is due to the rigid nature of solids.
Explanation:
A convex mirror of radius of curvature 1.6 m has an object placed at a distance of 1.0 m from it. Find the position of image and the magnification.
Answer:
The image is formed at 0.44 m in front of the mirror
magnification (M) = 0.44
Explanation:
Applying, mirror formular
1/f = (1/u)+(1/v).................... Equation 1
Where f = Focal length of the convex mirror, u = object distance, v = image distance.
Using the real is positive convection,
From the question,
Given: f = -1.6/2 = -0.8 m( The focal length of a convex mirror is vitual), u = 1.0 m
Substitute these values into equation 1
-1/0.8 = (1/v)+(1/1)
Solve for v
1/v = 1.25+1
1/v = 2.25
v = 1/2.25
v = 0.44 m
Hence the image is formed at 0.44 m in front of the mirror
Magnification (M) = v/u
m = 0.44/1
m = 0.44
To make a position-time graph, you plot position relative to the starting point on the y-axis against the corresponding_______on the x-axis
Answer:
time.
Explanation:
Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.
This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.
A reference point refers to a location or physical object from which the motion (movement) of another physical object or body can be determined.
Mathematically, the motion of an object is described in terms of acceleration, time, distance, speed, velocity, position, displacement, etc.
A graph can be defined as the graphical representation of data (informations) on horizontal and vertical lines i.e x-axis and y-axis respectively.
A position-time (x-t) graph is a graph of the position of an object against (versus) time.
To make a position-time graph, you should plot the values of the position of an object or body with respect to the starting point on the y-axis against the corresponding time on the x-axis.
Generally, the slope of the line of a position-time (x-t) graph is typically used to determine or calculate the velocity of an object.
An instantaneous velocity can be defined as the rate of change in position of an object in motion for a short-specified interval of time. Thus, an instantaneous velocity is a quantity that can be found by measuring the slope of a line that is tangent to a point on the graph.
In conclusion, the x - t graph also referred to as the position-time graph is used for determining the instantaneous velocity from the slope.
why physics ought to be studied?
Answer:
The goal of physics is to understand how things work from first principles. ... Courses in physics reveal the mathematical beauty of the universe at scales ranging from subatomic to cosmological. Studying physics strengthens quantitative reasoning and problem solving skills that are valuable in areas beyond physics.
An electron experiences a downward force of 12.8×10-19 N while traveling in a magnetic field of 8×10-5 T west, what is the magnitude of the velocity?
Answer:
[tex]v=10^5\ m/s[/tex]
Explanation:
Given that,
Magnetic force acting on an electron, [tex]F=12.8\times 10^{-19}\ N[/tex]
The magnitude of the magnetic field,[tex]B=8\times 10^{-5}\ T[/tex]
We need to find the magnitude of the velocity. We know that the magnetic force is given by :
[tex]F=qvB[/tex]
Where
v is the velocity
So,
[tex]v=\dfrac{F}{qB}\\\\v=\dfrac{12.8\times 10^{-19}}{1.6\times 10^{-19}\times 8\times 10^{-5}}\\\\v=10^5\ m/s[/tex]
So, the magnitude of velocity is[tex]10^5\ m/s[/tex].
Cual es el deporte que le da fortaleza y flexibilidad al cuerpo
Answer:
Aesthetic sports
Explanation:
Aesthetic sports are the one's that need well-developed physical qualities such as strength, agility, stamina, flexibility, and technical knowledge and artistry, in addition to technical ability and artistry. Elite athletes in these sports generally have a low abdominal fat , and the ranking is subjective.
In aesthetic sports like gymnastics, swimming, and figure skaters, dynamic and proactive flexibility is required.
why solid keep their shape?
Answer:
Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms
Hope this helps ☆*:. o(≧▽≦)o .:*☆
Describe the advantages and disadvantage is of living in a floodplain
Answer:
:) :::::::::::::::::::::::::::::::))))
An image of a car with height of 14 cm occurred in the mirror which is located at a T-
intersection. If the car height is 140 cm and the radius of the curvature of the mirror is 60 cm,
how far is the car from the mirror?
helpp me!!!!!!
Answer:
The distance of car form the mirror is 330 cm.
Explanation:
height of object, h = 140 cm
height of image, h' = 14 cm
radius of curvature, R = 60 cm
focal length, f = R/2 = + 30 cm
Let the distance of image is v and the distance of object is u.
[tex]\frac{h'}{h}\frac{v}{u}\\\\\frac{14}{140} =\frac{v}{u}\\\\v =\frac{u}{10}[/tex]
Use the formula of focal length
[tex]\frac{1}{f}=\frac{1}{v}+\frac{1}{u}\\\\\frac{1}{30}=\frac{10}{u}+\frac{1}{u}\\\\\frac{1}{30}=\frac{11}{u}\\\\u = 330 cm[/tex]
A vector points -43.0 units along the x axis, and 11.1 units along the y axis. Find the Direction of the vector.
Answer:
Explanation:
The direction of the vector implies only its angle, not its magnitude. The direction of the vector is found in
[tex]tan^{-1}(\frac{y}{x})[/tex] so
[tex]tan^{-1}(\frac{11.1}{-43.0})=-14.5[/tex] but since we are in QII (where x is negative and y is positive) we have to add 180 to this number to get a direction of 165.5 degrees
what do you mean by supplementary quantities and its unit?
$ \large\boxed{ \sf \red{More ~Info :}}$
The units of supplementary quantities are dimensionless units.
[tex] \\ [/tex]
A blue line with 5 orange tick marks then one red tick mark then 4 orange tick marks. The number zero is above the red tick mark.Assume each tick mark represents 1 cm.Calculate the total displacement from 0 if an object moves 3 cm to the left, then 7 cm to the right, and then 6 cm to the left.The object moves cm to the left.What is the total distance the object travels? cm
Answer:
16 cm
Explanation:
Given that,
The object begins from 0 and moves 3cm towards left side followed by 7 cm towards the right and then, 6 cm towards the left side.
Let the x-axis to be the +ve and on the right side and -ve on the left
Thus, displacement would be:
= 0 -3 + 7 -6
= -2 cm
This implies that the object displaces 2cm towards the left.
While the total distance covered by the object equal to,
= 0cm + 3cm + 7cm + 6cm
= 16 cm
Thus, 16 cm is the total distance.
Answer:
Its 2 to the right
Explanation:
edge :p
A wire, 20m long, is heated from a temperature of 5°C to 55°C. If the change in length is 0.020m, calculate the linear expansivity of the wire.
Answer:
0.01998⁰C;¹
Explanation:
you can see all steps in photo
newtons second law lab report link
Answer:
ghittu iihg उह्स उउह्स उग्य्किव जिक्ह्ब
