Answer:
2225 Pa = 2.10 BTU
Explanation:
The relationship between the Pascal and british thermal unit (BTU) is as follows :
1 pascal = 0.00094781707774915 BTU
If we want to convert 2225 Pa to BTU, we will use the above conversions.
So,
2225 Pa = 2225 ×0.00094781707774915
= 2.10 BTU
So, 2225 Pa is equal to 2.10 BTU.
Pls help me, I really need to understand this
Determine the dimensions for W if W = P L^3 / (M V^2) where P is a pressure, L is a length, M is a mass, and V is a velocity.
No dimensions
M
M / (L T^2)
L / T
M L / T^2
Answer:
ML/T^2
this is the correct answer
9. SAFELY BACKING UP YOUR VEHICLE INCLUDES ALL OF THE FOLLOWING
EXCEPT:
A. Looking over your right shoulder as you back up
O B. Checking behind your vehicle before you get in
C. Tapping your horn before you back up
George is replacing a burned out resistor in a circuit board. The board has a 10, a 20, and a 40 on resistor, all in parallel. When George has sided in the new component in the circuit is fixed, he checks his multimeter. What reading does he get?
Answer:
5.71 ohms
Explanation:
put it in the calculator
True or false: Units and dimensions are interchangeable words that describe the same concept.
True
False
Answer:
The answer to this is false
Explanation:
It is FALSE that units and dimensions are interchangeable words that describe the same concept.
What are units and dimension?Units is defined as a measure of quantity while dimension specify the measure of a line or curve.
Both terms cannot be used interchangeably even though the dimensions of a quantity is derived from its units.
Learn more o unit ad dimension here: https://brainly.com/question/28464
#SPJ2
write growth rate of tree ( engineering)
what is grain of timber
The diesel fuel cooler is being discussed. Technician A says that high-pressure fuel systems generate a lot of heat. Technician B says that temperature affects the density of the diesel fuel. Which technician is correct
Answer:
Both the technicians are correct.
Explanation:
As the pressure increases the temperature will also increase in accordance with the Boyle's law hence greater amount of heat is formed.
[tex]Pressure\propto Temperature[/tex]
When the temperature increases the intermolecular spaces increase as the molecules of the fuel gain energy and their kinetic energy increases. This is limited to temperatures below dissociation/combustion temperature of diesel .
In industrial and commercial installations, where large motors are often found, how is it necessary to power each motor? Using DC, Using AC, with a separate circuit, all on the same circuit
In industrial and commercial installations, where large motors are often found, it is necessary to power each motor by: B. using AC.
What is an electric motor?An electric motor can be defined as an electrical machine that is designed and developed to convert electrical energy into kinetic energy, especially through the use of an alternating current (AC) and electromagnetic induction.
What is an alternating current?An alternating current can be defined as a type of current that reverses direction periodically, and it is generally accompanied by continuous changes in its magnitude with respect to time.
In industrial and commercial installations, where large motors are often found, it is necessary to power each motor by using alternating current (AC) because these motors usually generate more torque.
Read more on alternating current motor here: https://brainly.com/question/8430632
#SPJ1
Which is one factor that scientists use to classify orders of soil?Which phrase best describes the biosphere?
Determine the dimensions for R if R = m V / (d^2 Q) where m is a mass, V is a velocity, d is a diameter, and the dimensions of Q are M/(LT).
No dimensions
M / (L T^2)
M L / T^2
M
L / T
Answer:
No dimension
Explanation:
The given equation is [tex]R = \dfrac{m \cdot V}{d^2 \cdot Q}[/tex], where;
m = Mass
V = Velocity
d = A diameter
The dimension of mass quantity = M
The dimension of the velocity quantity = L/T
The dimension of the dimeter quantity = L
The given dimension of Q = M/(L·T)
Therefore, we get;
[tex]The \ dimension \ of \ R = \dfrac{M \times L/T}{L^2 \times (M/LT)} = \dfrac{M \times L/T}{L \times M/T} = 1[/tex]
Therefore, R has no dimensions
Yall pls help me out
Determine the dimensions for T if T = M V^2 A / L^3 where M is a mass, V is a velocity, A is an area, and L is a length.
L / T
No dimensions
M L / T^2
M
M / (L T^2)
Answer:
M·L/T²
Explanation:
The given equation for T is presented as follows;
[tex]T = \dfrac{M \cdot V^2 \cdot A}{L^3}[/tex]
Where;
m = Mass with dimension M
V = Velocity, having the dimensions L/T
A = Area, having the dimensions L²
l = Length, having the dimensions, L
Therefore;
[tex]The \ dimensions \ of \ T = \dfrac{M \times (L/T)^2 \cdot L^2}{L^3} = \dfrac{M \times L^4/T^2 }{L^3} = M \cdot L/T^2[/tex]
The low-pressure fuel system is being discussed. Technician A says that the system must provide an adequate volume of fuel to the high-pressure fuel injection system. Technician B says that the system must provide fuel at a minimum pressure to the high-pressure fuel injection system. Which technician is correct
Answer:
Hence Both technicians A and B are correct that is Technician A says that the system must provide an adequate volume of fuel to the high-pressure fuel injection system. Technician B says that the system must provide fuel at a minimum pressure to the high-pressure fuel injection system are true.
Explanation:
The low-pressure fuel system contains the fuel filters; A fuel level sending unit/tank pick-up; A transfer pump. So from considering both technicians statements both are applicable.
Explanation:
MARK ME AS A BRIANLIEST .........what is 222 divided by 11.2
Answer:
The answer of this question is 19.89142857
Answer:
The number 222 is called the numerator or dividend, and the number 11 is called the denominator or divisor.
The quotient of 222 and 11, the ratio of 222 and 11, as well as the fraction of 222 and 11 all mean (almost) the same:
222 divided by 11, often written as 222/11.
Read on to find the result of 222 divided by 11 in decimal notation, along with its properties.
Explanation:
Represent each of the following units as a combination of primitive
dimensions where M=mass, L=length, T=time
PLS show work
Watt
Newton
Horsepower
Some important and basic points:
Unit of time is second (s).
Unit of mass is kilogram (kg).
Unit of distance/displacement is meter (m).
P.S. Displacement and distance are nearly same things, their unit is same.
Speed/velocity = distance/time
So, its unit is m/s.
Acceleration = (final velocity-initial velocity)/time.
So, its unit is m/s² or m.s^-2
We know from the formula that,
Force = mass × acceleration
=> F = ma
Putting units:
Newton = kg.m/s² or kg.m.s^-2 _____(1)
Putting dimensions:
Newton = M.L.T^-2
________________________
We know from the formula that,
Work = force × displacement
=> W = Fs
Putting units:
Joule = Newton.m
=> Joule = kg.m.s^-2.m [from (1)]
=> Joule = kg.m².s^-2 ______(2)
Putting dimensions:
Joule = M.L².T^-2
________________________
We know from the formula that,
Power = work/time
Putting units:
Watt = joule/s
=> Watt = kg.m².s^-2/s [from (2)]
=> Watt = kg.m².s^-3 ______(3)
Putting dimensions:
Watt = M.L².T^-3
________________________
We know from the formula that,
Horsepower = 746 watt
=> Horsepower = 746kg.m².s^-3 [from (3)]
Putting dimensions:
Horsepower = 746M.L².T^-3
Hope it helps!!The dimension of Watt, Newton and horsepower are ML²T⁻³, MLT⁻² and ML²T⁻³ respectively
Units and dimensionUnits are measure of a quantity. Dimensions are derived from the units. Gi
Force = mass × acceleration
For Newton:
Another representation for unit of Newton is kg.m/s². Writing in terms of the dimension
Newton = MLT⁻²
For Watts;
The unit of Watt is also kg.m².s⁻²/s which is equivalent to kg.m².s⁻³
In terms of dimension
Dimension of Watt = ML²T⁻³
For Horse power:
The unit of horse power is kg.m².s⁻³
Dimension of horsepower = ML²T⁻³
Learn more on units and dimension here: https://brainly.com/question/28464
#SPJ2
Pls help me Extra points
Represent each of the following units as a combination of primitive
dimensions where M=mass, L=length, T=time
Kilometer
Quart
Pascal
Watt
Newton
Horsepower
Kilometer = 1000m
Quart = 0.000946m³
Force = mass × acceleration
=> F = ma
Putting units:
Newton = kg.m/s² or kg.m.s^-2 _____(1)
Pressure = force/area
Putting units:
Pascal = Newton/m²
=> Pascal = kg.m.s^-2.m² [from (1)]
=> Pascal = kg.m^-1.s^-2
Work = force × displacement
=> W = Fs
Putting units:
Joule = Newton.m
=> Joule = kg.m.s^-2.m [from (1)]
=> Joule = kg.m².s^-2 ______(2)
Power = work/time
Putting units:
Watt = joule/s
=> Watt = kg.m².s^-2/s [from (2)]
=> Watt = kg.m².s^-3 ______(3)
Horsepower = 746 watt
=> Horsepower = 746kg.m².s^-3 [from (3)]
Hope it helps!!Herramientas para la instalación de un picaporte
Answer:
Un picaporte es una palanca en ángulo para abrir y cerrar una puerta a mano. Por lo general, el picaporte se empuja hacia abajo para abrir la puerta. El mecanismo de la cerradura de la puerta hace que el pestillo de la cerradura se salga de la placa de la cerradura mediante la rotación del pasador. No es necesario accionar el pestillo para cerrar la puerta, ya que el pestillo encaja automáticamente en su lugar.
La conexión entre las manijas de las puertas, que generalmente están unidas a ambos lados de la hoja de la puerta, se realiza mediante un pasador cuadrado. El mandril también establece la conexión con el mecanismo de la cerradura: su escuadra es guiada a través de la escuadra interior del seguidor de la manija de la cerradura, para que gire junto con ella.
Por lo tanto, las herramientas que tienen un rol en la instalación de un picaporte son, principalmente, una agujereadora para ingresar las fijaciones, destornillador y tornillos, martillo y clavos.
what is the si unit of potential difference
Answer:
The answer is volt (V).
Explanation:
Volt is the SI unit of potential difference. The symbol of volt is V.
Which of the following statements is correct?
Adhesive bonding allows several individual parts to be connected with nuts and bolts.
Rivets are temporary fasteners that bind two plates of metal together.
Both soldering and brazing are structurally stronger than welding.
Hardware assembly is primarily used when there is a need of being able to take individual parts out of an assembly throughout the life cycle of the product.
Answer:
b. rivets are tempory fasteners that bind two plate of metals together
different between an architect and an engineer
different between an architect and an engineer
Civil engineers work on the construction of the building. ... In short it can be said that while an Architect is a building designer, a Civil Engineer is a structural expert, who in
locução adjetiva e de portuges ou istoria
