Use the activity series below to predict whether the following reactions will take place.

Answer: The given compounds are identified as being made of ionic, covalent, or metallic bonds:

Explanation:

A bond formed by transfer of electrons from one atom to another is called an ionic bond. An ionic bond is formed between a metal atom and a non-metal atom.

A bond formed by transfer of electrons from one atom to another is called a covalent bond. A covalent bond is formed between two or more non-metal atoms only.

Steel is actually an alloy of carbon and iron where there is less than 2% carbon, 1% manganese and small amounts of silicon, phosphorus, oxygen and sulphur are present.

When atoms of metals are held together then bond formed between these atoms is called metallic bond.

Hence, steel is made of metallic bond.

Chemical formula of propane is [tex]CH_{3}CH_{2}CH_{3}[/tex] as there are only non-metal atoms are present. So, sharing of electrons takes place in such atoms due to which covalent bonding will be there.

Hence, propane is made up of covalent bonds.  

Calcium chloride contains a metal and a non-metal atom. This means that electrons are being transferred from calcium atom to the chlorine atom. Hence, bond present in calcium chloride is ionic bond.

Water has chemical formula [tex]H_{2}O[/tex]. Since, non-metal atoms are present there so sharing of electrons takes place between hydrogen and oxygen atoms. Hence, covalent bond is present in water.

Thus, we can conclude that given compounds are identified as being made of ionic, covalent, or metallic bonds:

Steel: ✔ metallic

Propane: ✔ covalent

Calcium chloride: ✔ ionic

Water: ✔ covalent

The three functions of the stem:

Answer:

All 3

Explanation:

Decomposers break apart complex organic materials into more elementary substances: water and carbon dioxide, plus simple compounds containing nitrogen, phosphorus, and calcium. All of these components are substances that plants need to grow.

Some decomposers are specialized and break down only a certain kind of dead organism. Others are generalists that feed on lots of different materials. Thanks to decomposers, nutrients get added back to the soil or water, so the producers can use them to grow and reproduce.

Answer:

780 watts

Explanation:

formula to find power when given amps and voltage

P = A x V

=6.50a x 120V

= 780 W (watts)

Answer: it consists of two simple machines: a lever and a wheel and axle. Effort is applied to the lever by picking up the handles of the wheelbarrow.

Explanation:

Answer:

B

Explanation:

B)

Answer:

C

Explanation:

Angiosperms have developed these adaptations because it attracts pollinators which helps the ecosystem grow.

Answer:

starch or carbs - amylase

fat - lipase

protien - pepsim

Answer:

The answer is SiO2

Explanation:

Because nonmetals are those who gain electrons and form ve ions

Answer:

Semi : Boron [B] Non-Metal : Carbon [C] Metal : Manganese [Mn]

Explanation:

Periodic table I'm guessing!

Answer: Raw meat, poultry and seafood. Feces may get onto raw meat and poultry during the butchering process. ...

Raw eggs. ...

Fruits and vegetables.

Explanation:

Answer:

Explanation:

Hope this helps u!!

Answer:

A. total aumenta

Explanation:

8g + 4.04g = 12.04g

Answer:

34545 J

Explanation:

Applying,

E = mc'+cm(t₂-t₁)+Cm(t₂-t₀).............. Equation 1

Where E = Total energy, m = mass of the ice, c' = latent heat of ice, c = specific heat capacity of ice, t₂ = final temperature, t₁ = initial temperature, C = specific heat capacity of water, t₀ = temperature of ice at 0°C

From the question,

Given: m = 35 g = 0.035 kg, t₁ = -10°C, t₂ = 100°C, t₀ = 0°C

Constant: C = 4200 J/kg.K, c = 2100 J/kg.K, c' = 336000 J/kg

Susbtitute these values into equation 1

E = [336000(0.035)]+[0.035×2100(100+10)]+[4200×0.035(100-0)]

E = 11760+8085+14700

E = 34545 J

Answer:

False.

I just got it right, lol.

Answer: I think it’s B

C - 4.32

Explanation:

.44 x 9.81

Answer:

34.78% Fe

39.66% Cu

5.48% S

20.07% O

Explanation:

Para resolver esta pregunta debemos hallar la masa de cada átomo en cada mineral. Así, podremos hallar el porcentaje de cada átomo:

Pirita (Fe: 55.845g/mol; S: 32.065g/mol; FeS2: 119.975g/mol)

Masa Fe:

20kg FeS2 * (1*55.845g/mol / 119.975g/mol) = 9.31kg Fe

Masa S:

20kg FeS2 * (2*32.065g/mol / 119.975g/mol) = 10.69kg S

Hemetita (Fe: 55.845g/mol; O: 16g/mol; Fe2O3: 159.688g/mol)

Masa Fe:

70kg Fe2O3 * (2*55.845g/mol / 159.688g/mol) = 48.96kg Fe

Masa O:

70kg Fe2O3 * (3*16g/mol / 159.688g/mol) = 21.04kg O

Calcopirita (Fe: 55.845g/mol; Cu: 63.546g/mol; CuFe2: 175.236 g/mol)

Masa Fe:

15kg CuFe2 * (2*55.845g/mol / 175.236 g/mol) = 9.56kg Fe

Masa Cu:

15kg CuFe2 * (1*63.546g/mol / 175.236 g/mol) = 5.44kg Cu

Tenorita (O: 16g/mol; Cu: 63.546g/mol; CuO: 79.545 g/mol)

Masa O:

90kg CuO * (1*16g/mol / 79.545 g/mol) = 18.10kg O

Masa Cu:

90kg CuO * (1*63.546g/mol / 79.545 g/mol) = 71.90kg Cu

Masa Total: 20kg + 70kg + 15kg + 90kg = 195kg

Porcentaje Hierro:

9.31kg Fe + 48.96kg Fe + 9.56kg Fe / 195kg * 100 =

34.78% Fe

Porcentaje Cobre:

5.44kg Cu + 71.90kg Cu / 195kg * 100 =

39.66% Cu

Porcentaje Azufre:

10.69kg S / 195kg * 100 =

5.48% S

Porcentaje Oxígeno:

21.04kg O + 18.10kg O/ 195kg * 100 =

20.07% O

Ocean acidification is the process of decreased pH levels of the oceans. The burning of fossil fuels and industrialization are man-made activities that lead to this process.

Ocean acidification is an increased concentration of acidic components of the oceans due to an increase in the carbon dioxide level of the oceans.

Human activities like cutting down a large number of trees, discharging from industrial outlets, and burning fossils like petrol, coal, diesel, etc. are leading to increased acidification of the oceans.

Therefore, natural causes like increased salinity, flood, and earthquake are the reasons for oceanic acidification.

Learn more about ocean acidification here:

https://brainly.com/question/7604502

Answer:

They are sour. =)

Explanation:

Answer:

6

Explanation:

6, because the number after decimals are considered significant but the 0 after the last number is not significant.

Answer:

metal ores are naturally occurring rocks that contain metals or metal compounds in sufficient amounts to make it worthwhile extracting them

Answer:

hydrogen bonds are very weak and can only occur when polar covalent bonds are present

Explanation:

Hydrogen bonds are weak intermolecular interactions that occur when hydrogen is covalently bonded to a highly electronegative atom.

Owing to the difference in electro negativity between hydrogen and the highly electronegative atom, the bond is a polar covalent bond.

This hydrogen bond is a weak bond but accounts for properties such as high melting and boiling points of small molecules such as water and ammonia.

Answer:

See explanation

Explanation:

Natural gas is mined along with crude oil in many oil wells. It has the advantage of being a cheap fossil fuels which is easily obtainable.

Generally, natural gas is the cleanest of all the fossil fuels. This means that it is the fossil fuel that least contributes to environmental pollution.

On the other hand; natural gas produces some amount of sulphur as it is burnt and mercury as particulate matter. These substances are quite dangerous to health.

Secondly, the combustion of natural gas leads to the production of the oxides of nitrogen which play a key role in the occurrence of photochemical smog.

Answer:

2.39×10¯⁵ m²

Explanation:

From the question given above, the following data were obtained:

Distance (d) = 8.08×10¯⁵ m

Charge (q) = 2.24×10¯⁹ C

Potential difference = 855 V

Area(A) =?

NOTE: Permittivity (ε₀) = 8.854×10¯¹² F/m

The area can be obtained as follow:

q = ε₀AV/d

2.24×10¯⁹ = 8.854×10¯¹² × A × 855 / 8.08×10¯⁵

2.24×10¯⁹ = 7.57×10¯⁹ × A / 8.08×10¯⁵

Cross multiply

7.75×10¯⁹ × A = 2.24×10¯⁹ × 8.08×10¯⁵

7.75×10¯⁹ × A = 1.81×10¯¹³

Divide both side by 7.75×10¯⁹

A = 1.81×10¯¹³ / 7.75×10¯⁹

A = 2.39×10¯⁵ m²

Thus, the area of the plate is 2.34×10¯⁵ m²

Answer:

2.39

Explanation:

Answer:

23, 51

Explanation:

Edmentum/plato

As per the balanced reaction, 2 moles of aluminum metal and 3 moles of copper nitrate gives 2 moles of aluminum nitrate and 3 moles of copper metal.  10 g  of Al and 25g of copper nitrate gives 0.08 moles of aluminum nitrate and 0.13 moles of copper.

A limiting reactant is the reacting species which is not sufficient in amount to complete the reaction. Hence, the limiting reactant determines the yield of the reaction.

The given reaction is written as:

[tex]\rm 3Cu(NO_{3})_{2} + 2Al \rightarrow 2 Al(NO_{3})_{3} + 3Cu[/tex]

2 moles of Al and 3 moles of copper nitrate gives 2 moles of aluminum nitrate and 3 moles of Cu.

Molar mass of copper nitrate = 187.5 g/mol

atomic mass of aluminum = 27 g/mol

then, number of moles in 10 g of Al = 10 g/27 g/mol = 0.37 moles.

number of moles in 25 g of copper nitrate = 25 g/187.5 g/mol = 0.13 moles.

0.37 moles of Al needs 0.5 moles of copper nitrate to react with. Hence, copper nitrate is the limiting reactant.

3 moles of copper nitrate gives 2 moles of aluminum nitrate. Then 0.13 moles will give 2/3rd of 0.13 i e., 0.08 moles of aluminum nitrate. Similarly 0.13 moles copper nitrate gives 0.13 moles of copper metal.

Find more on limiting reactant:

https://brainly.com/question/14225536

#SPJ7

Your question is incomplete. But your complete question probably was:

10 g of aluminum metal reacts with 25 g of copper nitrate. Use the periodic table to determine the amount of copper and aluminum nitrate formed in the reaction.

In the reaction,

moles of Cu and

moles of Al(NO3)3 are formed.

Answer:

C

Explanation:

Nuclear fission is a process where the nucleus of an atom is split into two or more smaller nuclei, known as fission products.

Nuclear fission is the splitting of a nucleus into two or more nuclei defines best of nuclear fission among the following , therefore option (c) is correct.

Nuclear fission is a process in which an unstable nucleus splits into two nuclides and emits neutrons.

The fission process often produces free neutrons and photons and releases a large amount of energy. Therefore , nuclear fission is either a nuclear reaction or a radioactive decay process.

The fission process often produces gamma radiations , and releases a very large amount of energy .

Nuclear fission is the splitting of a nucleus into two or more nuclei defines best of nuclear fission among the following , hence option (c) is correct.

Learn more about nuclear fission , here:

https://brainly.com/question/14899304

#SPJ2

Answer:

pH = 6

Explanation:

Given that,

The concentration of [OH]⁻ ion is [tex]10^{-6}[/tex].

We need to find the pH of the solution.

We know that,

[tex]pH=-\log[OH]^-[/tex]

Put all the values,

[tex]pH=-\log(10^{-6})\\\\pH=6[/tex]

Hence, the pH of the solution is 6.

Answer:

Meiosis

Explanation:

.bnsksksksjabsn...

Answer:

sana makatulong po sainyo