Answer:
4 number is the answer for your question
Discuss the OSI Layer protocols application in Mobile Computing
Answer:
The OSI Model (Open Systems Interconnection Model) is a conceptual framework used to describe the functions of a networking system. The OSI model characterizes computing functions into a universal set of rules and requirements in order to support interoperability between different products and software.
Discuss the DMA process
Answer:
Direct memory access (DMA) is a process that allows an input/output (I/O) device to send or receive data directly to or from the main memory, bypassing the CPU to speed up memory operations and this process is managed by a chip known as a DMA controller (DMAC).
Explanation:
A defined portion of memory is used to send data directly from a peripheral to the motherboard without involving the microprocessor, so that the process does not interfere with overall computer operation.
In older computers, four DMA channels were numbered 0, 1, 2 and 3. When the 16-bit industry standard architecture (ISA) expansion bus was introduced, channels 5, 6 and 7 were added.
ISA was a computer bus standard for IBM-compatible computers, allowing a device to initiate transactions (bus mastering) at a quicker speed. The ISA DMA controller has 8 DMA channels, each one of which associated with a 16-bit address and count registers.
ISA has since been replaced by accelerated graphics port (AGP) and peripheral component interconnect (PCI) expansion cards, which are much faster. Each DMA transfers approximately 2 MB of data per second.
A computer's system resource tools are used for communication between hardware and software. The four types of system resources are:
I/O addresses Memory addresses. Interrupt request numbers (IRQ). Direct memory access (DMA) channels.DMA channels are used to communicate data between the peripheral device and the system memory. All four system resources rely on certain lines on a bus. Some lines on the bus are used for IRQs, some for addresses (the I/O addresses and the memory address) and some for DMA channels.
A DMA channel enables a device to transfer data without exposing the CPU to a work overload. Without the DMA channels, the CPU copies every piece of data using a peripheral bus from the I/O device. Using a peripheral bus occupies the CPU during the read/write process and does not allow other work to be performed until the operation is completed.
With DMA, the CPU can process other tasks while data transfer is being performed. The transfer of data is first initiated by the CPU. The data block can be transferred to and from memory by the DMAC in three ways.
In burst mode, the system bus is released only after the data transfer is completed. In cycle stealing mode, during the transfer of data between the DMA channel and I/O device, the system bus is relinquished for a few clock cycles so that the CPU can perform other tasks. When the data transfer is complete, the CPU receives an interrupt request from the DMA controller. In transparent mode, the DMAC can take charge of the system bus only when it is not required by the processor.
However, using a DMA controller might cause cache coherency problems. The data stored in RAM accessed by the DMA controller may not be updated with the correct cache data if the CPU is using external memory.
Solutions include flushing cache lines before starting outgoing DMA transfers, or performing a cache invalidation on incoming DMA transfers when external writes are signaled to the cache controller.
Answer:
See explanation
Explanation:
DMA [tex]\to[/tex] Direct Memory Access.
The peripherals of a computer system are always in need to communicate with the main memory; it is the duty of the DMA to allow these peripherals to transfer data to and from the memory.
The first step is that the processor starts the DMA controller, then the peripheral is prepared to send or receive the data; lastly, the DMA sends signal when the peripheral is ready to carry out its operation.
what is computer with figure
Answer:
A computer is an electronic device that accept raw data and instructions and process it to give meaningful results.
Create a python program that display this
Factorial Calculator
Enter a positive integer: 5
5! = 1 x 2 x 3 x 4 x 5
The factorial of 5 is: 120
Enter a positive integer: 4
4! = 1 x 2 x 5 x 4
.
The factorial of 4 is: 24
Enter a positive integer: -5
Invalid input! Program stopped!
Answer:
vxxgxfufjdfhgffghgfghgffh
you get a call from a customer who says she can't access your site with her username and password. both are case-sensitive and you have verified she is entering what she remembers to be her user and password correctly. what should you do to resolve this problem?
a. have the customer clear her browser history and retry
b. look up her username and password, and inform her of the correct information over the phone
c. have the user reboot her system and attempt to enter her password again
d. reset the password and have her check her email account to verify she has the information
Answer:
answer would be D. I do customer service and would never give information over the phone always give a solution
In order to resolve this problem correctly, you should: D. reset the password and have her check her email account to verify she has the information.
Cybersecurity can be defined as a group of preventive practice that are adopted for the protection of computers, software applications (programs), servers, networks, and data from unauthorized access, attack, potential theft, or damage, through the use of the following;
Processes.A body of technology.Policies.Network engineers.Frameworks.For web assistance, the security standard and policy which must be adopted to enhance data integrity, secure (protect) data and mitigate any unauthorized access or usage of a user's sensitive information such as username and password, by a hacker, is to ensure the information is shared discreetly with the user but not over the phone (call).
In this context, the most appropriate thing to do would be resetting the password and have the customer check her email account to verify she has the information.
Read more: https://brainly.com/question/24112967
A test for logical access at an organization being audited would include: Group of answer choices Checking that the company has a UPS and a generator to protect against power outages Making sure there are no unmanaged third-party service level agreements Performing a walkthrough of the disaster recovery plan Testing that super user (SYSADMIN) access is limited to only appropriate personnel
Answer:
Testing that super user (SYSADMIN) access is limited to only appropriate personnel.
Explanation:
A test for logical access at an organization being audited would include testing that super user (SYSADMIN) access is limited to only appropriate personnel.
Write a program that takes a date as input and outputs the date's season. The input is an integer to represent the month and an integer to represent the day. Ex: If the input is: 4 11 the output is: spring In addition, check if both integers are valid (an actual month and day). Ex: If the input is: 14 65 the output is: invalid The dates for each season are: spring: March 20 - June 20 summer: June 21 - September 21 autumn: September 22 - December 20 winter: December 21 - March 19
Answer:
Explanation:
The following program is written in Java. It is a function that takes in the two parameters, combines them as a String, turns the combined String back into an integer, and uses a series of IF statements to check the parameters and determine which season it belongs to. Then it prints the season to the screen. The code has been tested with the example provided in the question and the output can be seen in the attached image below.
class Brainly {
public static void main(String[] args) {
getSeason(4, 65);
getSeason(4, 11);
}
public static void getSeason(int month, int day) {
String combined = String.valueOf(month) + String.valueOf(day);
int combinedInt = Integer.parseInt(combined);
if ((month > 0 && month < 12) && (day > 0 && day < 31)) {
if ((combinedInt >= 320) && (combinedInt <= 620)) {
System.out.println("The Season is Spring");
} else if ((combinedInt >= 621) && (combinedInt <= 921)) {
System.out.println("The Season is Summer");
} else if ((combinedInt >= 922) && (combinedInt <= 1220)) {
System.out.println("The season is Autumn");
} else {
System.out.println("The Season is Winter");
}
} else {
System.out.println("Invalid date");
}
}
}
Which of the following BEST describes an inside attacker?
An agent who uses their technical knowledge to bypass security.
An attacker with lots of resources and money at their disposal.
A good guy who tries to help a company see their vulnerabilities.
An unintentional threat actor. This is the most common threat.
The inside attacker should be a non-intentional threat actor that represents the most common threat.
The following information related to the inside attacker is:
It is introduced by the internal user that have authorization for using the system i.e. attacked.It could be intentional or an accidental.So it can be non-intentional threat.Therefore we can conclude that The inside attacker should be a non-intentional threat actor that represents the most common threat.
Learn more about the threat here: brainly.com/question/3275422
A computer has many resources. A resource can be memory, disk drive, network bandwidth, battery power, or a monitor. It can also be system objects such as shared memory or a linked list data structure. This principle is based in object-oriented programming (OOP). In OOP, a class definition encapsulates all data and functions to operate on the data. The only way to access a resource is through the provided interface. Which security principle are we referring to
Answer:
The security principle being referred to here is:
Resource Encapsulation.
Explanation:
Resource Encapsulation is one of the cybersecurity first principles. It allows access or manipulation of the class data as intended by the designer. The cybersecurity first principles are the basic or foundational propositions that define the qualities of a system that can contribute to cybersecurity. Other cybersecurity first principles, which are applied during system design, include domain separation, process isolation, modularization, abstraction, least principle, layering, data hiding, simplicity, and minimization.
5 Major of computer application
Answer:
Basic Applications of Computer
1 ) Home. Computers are used at homes for several purposes like online bill payment, watching movies or shows at home, home tutoring, social media access, playing games, internet access, etc.
2 ) Medical Field.
3 ) Entertainment.
4 ) Industry.
5 ) Education.
Explanation:
Hope it helps you
Mark my answer as brainlist
have a good day
Instructions
Create a multimedia project that contains the text element and all the contents that you have studied about that element
Answer:
iiiio888887776558777u765
g Add a throw statement to the processNumbers function that throws the message "An element in the list is not a number." if one of the elements in toProcess is not a number. Hint: The function isNaN() returns true if the parameter is not a number.
Answer and Explanation:
function processNumbers(alist){
var Ourarray= new array(alist);
Ourarray.foreach(
if(isNaN()){
Console.log( "An element in the list is not a number."};
break;
}
}
processNumbers(alist)
From the above, we have defined a function that takes an array parameter(the following array variable will make sure of that). We test each element in the array using foreach array function. The for each function runs the if statement and if isNan is true for each of the elements in the array.
Alexis received an email message from an unknown sender that included an attachment.
If she opens the attachment, what kind of malicious software might be activated, and what are the consequences?
Opening the attachment would release a worm, which would infect her system with a virus.
Opening the attachment would release a worm, which would infect her system with spyware.
Opening the attachment would release an active worm, which would infect her system with adware.
Opening the attachment would release a passive worm, which would infect her system with adware.
Answer:
Opening the attachment would release a worm, which would infect her system with a virus.
Answer: B. Opening the attachment would release a worm, which would infect her system with a virus.
3. Coaxial/telephone cable sends
during the data transmission
signal
Answer:
high frequency signal.
T
N
O
?
You can insert only the row
only to
True or false
false
Explanation:
good luck bro
have a great day
Answer:
false
Explanation:
e) Point out the errors( if any) and correct them:-
class simple
{
inta,b,c;
double sumNumber
{
int d = a + b + c;
double e = d/5.6;
return e;
}
void show Number()
{
a = 10, b = 20, c=5;
System.out.println(d);
double f = sumNumber(a,b,c);
System.out.print(e);
}
}
Explanation:
double e-d/5.6;is wrong it should return to c
3. Which property is used to select full Row of data grid view
a) Select Mode b) Mode Selection c) Selection Mode d) Mode Select
Answer:
I think a is correct answer.
What do you do if your computer dies/malfunctions? Reboot (Restart) Shut Down Recovery CD and Recover your system Call a person to fix it
Answer:
Restart
Explanation:
Simply I may restart my pc if it dies/malfunctions. I'll not restart immediately, I'll wait for an hour and do restart my computer. If it doesn't work then maybe I'll Call a person to fix it.
what is IBM 1401 used for? Write your opinion.
Explanation:
The 1401 was a “stored program computer,” allowing programmers to write (and share) applications loaded into the machine from punched cards or magnetic tape, all without the need to physically reconfigure the machine for each task.
Select the scenario that describes a top-down approach to data warehouse design.
Cathy’s Cards and Gifts, which has three stores, creates data marts for its sales, marketing, and delivery departments to study the possibility of establishing a new store.
Crawford's Fabrics, which wants to expand its operations, combines data from the purchasing and sales departments into a central database, to be divided into new data marts as needed.
Cynthia’s Florals, which is dealing with debt, creates new data marts for the service, delivery, and sales departments to develop a strategy to stay in business.
Connor’s Meat Market, which just opened, creates data marts to track the sale of each of the following meats: beef, pork, lamb, and fish.
Answer:
Crawford's Fabrics, which wants to expand its operations, combines data from the purchasing and sales departments into a central database, to be divided into new data marts as needed.
The scenario defines a top-down approach to data warehouse design as "Crawford's Fabrics, which wants to expand its operations, combines data from the purchasing and sales departments into a central database, to be divided into new data marts as needed".
What is a top-down approach to data warehouse design?In the "Top-Down" method system, a data warehouse exists defined as a subject-oriented, time-variant, non-volatile, and integrated data storage for the entire business data from various sources exist validated, reformatted, and saved in a normalized (up to 3NF) database as the data warehouse.
Therefore, the correct answer is option b) Crawford's Fabrics, which wants to expand its operations, combines data from the purchasing and sales departments into a central database, to be divided into new data marts as needed.
To learn more about warehouse design
https://brainly.com/question/25885061
#SPJ2
Why are data silos problematic?
Answer:
Hampers collaboration
Resource wastage
Lack of data integrity
Explanation:
Data silos comes into play When different departments of an orgainiziations independently collects data needed for its operations. The finance, HR, administrative departments and so on collects their data and keeps it to themselves. As a result there is a repetitive and needless gathering and storage of already existing data, that is the data required by one group will have to be gathered again while it currently exists with another group. This leads to inefficient resource management and wastage. This practice also leads to data integrity as data stored differently across departments becomes inconsistent and less accurate over time. Team work and collaboration is gradually eroded as each group continues to hold on to its resources which poses a problem towards organizational growth.
Write a program named lastname_firstname_cities.py that works with information about large cities. Your program will open the cities.txt downloadfile. Each line in the file has the name of a city, its country, and its population. The first few lines of the file look like this:
Answer and Explanation:
Open your text editor and open new file. Save new file file as lastname_firstname_cities.py. The program will open the file cities.txt downloadfile hence :
dfile= open(cities.txt, "r")
If we write this into our lastname_firstname_cities.py file it will open our cities.txt downloadfile in read mode and text mode(by default unless we specify binary mode which is for images)
Write a C program that will load entries from a file containing details of books and prints them.
Program Requirements:
a. Load file containing details of books
b. Print out all the books Required approach:
1. Design a struct/class that can hold the details of an individual book.
2. Dynamically allocate an array of these objects. The size should be the number of book entries from the input file given by the user.
3. Load all of the book entries into this array of objects before printing
Answer:
........
Explanation:
Explain the purpose of the open() and close() operations.
Answer:
The open() operation notifies the system that the named file is about to become active. The close() operation notifies the system that the named file is no longer in active use by the user who issued the close operation.
Chất xơ có nhiều trong thực phẩm nào?
Answer: rau củ quả đều có lượng chất xơ nhiều hơn so với các loại thực phẩn khác
Explanation:
I connected to an external hard drive to transfer some photos from my vacation. When I try to drag the photo, it bounces right back and does not transfer. What is the likely cause of this issue?
a. hard drive is full
b. photos were taken in a different country
c. USB port is broken
d. the file structure of the 2 hard drives are not compatible
The answer is D, What is the likely cause of this issue is that the file structure of the two hard drives are not compatible.
The file structure or file system, of a hard drive, tells the disk how to read, write and store information on the drive. Some file systems do not allow the disk to store any files and often do not display error messages. If we try to drag a file onto a hard drive with this kind of file structure, the action would simply not be performed. This can be fixed by formatting the disk partition into a new file system.
Option B states that the issue may be that the photos were taken in a different country. This is not the cause of the problem because regardless of where the pictures are taken, they are all stored in common formats such as:
JPEGPNGJFIFAny external hard drive capable of storing images will have the ability to receive files in these formats as well as many other image formats. For this reason, option B is False.
The question states that you were able to connect the external Hard drive and drag files onto it, though unsuccessfully. This tells us that the USB port is working as intended, if it were not working, it would not display the Hard drive onto the computer and we would not be able to drag files to it. Therefore, option C is false
Insufficient Hard drive storage space is a common issue in not being able to transfer files between hard drives. However, if this were the case, the user would be shown a message displaying the error. The message may look like:
"Insufficient space on the disk.""The Disk is full.""Not enough memory to complete this action"The exact wording may vary depending on the operating system in use. Since the question states that the files simply "bounces back" without an error message displaying, we can infer that option A is false.
For more help with Hard drive issues see: https://brainly.com/question/14254444?referrer=searchResults
Type the correct answer in the box. Spell all words correctly.
Which testing requires coding the test cases into a scripting language?
testing requires coding the test cases into a scripting language.
Answer:
sorry I forgot it
Explanation:
because I am now in a last position
Select the correct statement(s) regarding IP addressing.
a. IPv4 and IPv6 addressing is fully compatible with one another.
b. CIDR address format represents a Class C network only used within an intranet.
c. Subnet masks are used with both class and classless IP addresses.
d. all statements are correct.
Subnet masks are used with both class and classless IP addresses is the correct statement. Therefore, the correct option is C.
What is an IP address?A device on the internet or a local network may be identified by its IP address, which is a special address. The rules defining the format of data delivered over the internet or a local network are known as “Internet Protocol,” or IP.
Only C is correct, rest other statements are incorrect because:
a. IPv4 and IPv6 addressing is fully compatible with one another is incorrect. While IPv4 and IPv6 can coexist on the same network, they are not fully compatible with one another.
b. CIDR address format represents a Class C network only used within an intranet is incorrect. Classless Inter-Domain Routing (CIDR) is a technique used to allocate IP addresses more efficiently.
Therefore, subnet masks are used with both class and classless IP addresses is the correct statement. Therefore, the correct option is C.
Learn more about, here
https://brainly.com/question/3805118
#SPJ6
If you are to enhance the ICT used by your teachers, how will ypu do it? Will you use the same ICT or will you modify how it was integrated?
To enhance the ICT (Information Communication Technology) used by teachers, I will modify how the ICT was integrated.
The modification of how ICT is integrated will change the culture that places teaching over technology. Then, teachers will be taught how to use ICT to:
improve learning so that teachers become learning facilitatorsmotivate learners by fostering learning autonomy, making students less dependent on the teacherengage the learners by creating collaborative learningdiminish content learning so that students learn to think, create, and communicate effectivelymake learning a lifetime culture enhance the learning environment so that teachers become collaborators and co-learners with students.Thus, I will enhance the ICT used by teachers by modifying its integration to achieve better results for both teachers and learners.
Learn more about the importance of ICT here: https://brainly.com/question/13724249
The program is the set of instructions a computer obeys
Answer:
True
Explanation:
a program is basicly just a list of commands you can run over and over again.