what are the six chemicals in production of liquid soaps​

Answer:

See explanation

Explanation:

A system is said to have attained dynamic equilibrium when the rate of forward reaction and the rate of reverse reaction are equal.

Considering the system under consideration;

I2(s)⇄I2(g)

Heating the container converts solid iodine to purple coloured iodine vapour.

At equilibrium, there will be no net change in the amount of solid iodine and iodine vapour present in the system because the two processes (forward and reverse reactions) occur at the same rate at equilibrium.

Answer:

bakit Kay's lahat Ng module mahirap

Answer:

Explanation to the following question is as follows;

Explanation:

Any phenomenon that would have the potential to cause severe death or property damage is considered a danger. When the potential for devastation is realised, a hazard becomes a disaster. All catastrophes are risks, but not all risks are catastrophes. Hazards do not always result in devastation.

Answer:

I hope this will help you.

Answer:

pCH₄ = 0.540 atm

pC₂H₆ = 0.405 atm

pC₃H₈ = 0.505 atm

Explanation:

Step 1: Calculate the total number of gaseous moles

n = n(CH₄) + n(C₂H₆) + n(C₃H₈)

n = 0.320 mol + 0.240 mol + 0.300 mol = 0.860 mol

Step 2: Calculate the partial pressure of each gas

We will use the following expression.

pi = P × Χi

where,

pCH₄ = 1.45 atm × 0.320 mol/0.860 mol = 0.540 atm

pC₂H₆ = 1.45 atm × 0.240 mol/0.860 mol = 0.405 atm

pC₃H₈ = 1.45 atm × 0.300 mol/0.860 mol = 0.505 atm

Answer:

3.1 kg

Explanation:

Step 1: Write the balanced combustion equation

C₈H₁₈ + 12.5 O₂ ⇒ 8 CO₂ + 9 H₂O

Step 2: Calculate the moles corresponding to 1.0 kg of C₈H₁₈.

The molar mass of C₈H₁₈ is 114.23 g/mol.

1.0 × 10³ g × 1 mol/114.23 g = 8.8 mol

Step 3: Calculate the moles of CO₂ produced from 8.8 moles of C₈H₁₈

The molar ratio of C₈H₁₈ to CO₂ is 1:8. The moles of CO₂ produced are 8/1 × 8.8 mol = 70 mol.

Step 4: Calculate the mass corresponding to 70 moles of CO₂

The molar mass of CO₂ is 44.01 g/mol.

70 mol × 44.01 g/mol = 3.1 × 10³ g = 3.1 kg

Answer:

0.512 M

Explanation:

We'll begin by calculating the number of mole in 12 g of C₂H₆O₄. This can be obtained as shown below:

Mass of C₂H₆O₄ = 12 g

Molar mass of C₂H₆O₄ = (2×12) + (6×1) + (4×16)

= 24 + 6 + 64

= 94 g/mol

Mole of C₂H₆O₄ =?

Mole = mass /molar mass

Mole of C₂H₆O₄ = 12 / 94

Mole of C₂H₆O₄ = 0.128 mole

Next, we shall convert 250 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

250 mL = 250 mL × 1 L / 1000 mL

250 mL = 0.25 L

Thus, 250 mL is equivalent to 0.25 L.

Finally, we shall determine the molarity of the solution. This can be obtained as follow:

Mole of C₂H₆O₄ = 0.128 mole

Volume = 0.25 L

Molarity =?

Molarity = mole /Volume

Molarity = 0.128 / 0.25

Molarity = 0.512 M

Thus, the molarity of the solution is 0.512 M

Answer:

O 100

Explanation:

Answer:

39.02

Explanation:

From the question given above, the following data were obtained:

Isotope A:

Mass of A = 38

Abundance of A (A%) = 9.67%

Isotope B:

Mass of B = 39

Abundance of B (B%) = 78.68%

Isotope C:

Mass of C = 40

Abundance of C (C%) = 11.34%

Isotope D:

Mass of D = 41

Abundance of D (D%) = 0.31%

Average atomic mass of X =?

The average atomic mass of X can be obtained as follow:

Average = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100] + [(Mass of D × D%)/100]

= [(38 × 9.67)/100] + [(39 × 78.68)/100] + [(40 × 11.34)/100] + [(41 × 0.31)/100]

= 3.6746 + 30.6852 + 4.536 + 0.1271

= 30.02

Thus, the average atomic mass of X is 39.02

Answer:

Potassium

Explanation:

To solve this question we need to find, as first, the average atomic mass of the element knowing that is defined as the sum of the masses of each isotope times their abundances. For the element X:

Average atomic mass:

38*0.0967 + 39*0.7868 + 40*0.1134 + 41*0.0031

= 39.02g/mol

The atom that has the average atomic mass closest to 39.02g/mol is Potassium, K = 39.10g/mol.

Answer:

electron configuration

Explanation:

The arrangement of electrons in the atomic orbitals of an atom is called the electron configuration. Electron configurations can be determined using a periodic table.

Answer:

Molecular mass, M = 58.20 g/mol.

Explanation:

Given the following data;

Conversion:

760 mmHg = 1 atm

770 mmHg = 770/760 = 1.0131 atm

Temperature = 25°C = 273 + 25 = 298 K

To find the molecular mass, we would use the ideal gas law equation (density version);

PM = dRT

Where;

Making M the subject of formula, we have;

[tex] M = \frac {dRT}{P} [/tex]

Substituting into the formula, we have;

[tex] M = \frac {2.41 * 0.0821 * 298}{1.0131} [/tex]

[tex] M = \frac {58.9626}{1.0131} [/tex]

Molecular mass, M = 58.20 g/mol.

Answer:

A. The red side is acidic.

B. Because it has more positive hydrogen ions.

C. The blue side is basic.

D. Because it has more negative hydroxide ion.

Given the data from the question,

A. The side with more H⁺ is acidic

B. It is acidic because it contains more H⁺

C. The side with more OH¯ is basic

B. It is basic because it contains more OH¯

This is simply a measure of the acidity / alkalinity of a solution.

The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration

The pH scale is a scale that gives an understanding of the variation of the acidity / alkalinity of a solution.

The scale ranges from 0 to 14 indicating:

The presence of H⁺ indicates acidity.

Thus, the side with more H⁺ is acidic.

The presence of OH¯ indicates the solution is basic.

Therefore, the side with more OH¯ is basic

Learn more about pH:

https://brainly.com/question/3709867

Answer:

0.723 moles (5 s.f.)

Explanation:

Whenever there is a chemical equation, ensure that it is balanced. This is because a balanced chemical equation tells us the mole ratio (not the ratio of their masses), which means the relationship of the number of moles of reactants or products with one another.

The chemical equation given has already been balanced. Looking at the coefficients of HBr and Ba(OH)₂, the mole ratio of HBr to Ba(OH)₂ is 2: 1.

• 1 mole of Ba(OH)₂ is needed to react with 2 mole of HBr

Find the number of moles of HBr present:

Number of moles= mass ÷mr

Amount of HBr

= 117 ÷(1 +79.9)

= 1.4462 moles (5 s.f.)

Since the amount of Ba(OH)₂ required is half the amount of HBr present,

amount of Ba(OH)₂ required

= 1.4462 ÷2

= 0.723 moles (3 s.f.)

Notes:

• mr

= relative molecular mass

= sum of relative atomic masses (which can be found in the periodic table) in a molecule

Answer:

See explanation

Explanation:

In Bohr's theory, electrons are found in specific regions in space called orbits. These orbits are also called energy levels. An electron may move from one energy level to another by absorbing or emitting energy.

In the wave mechanical model, electrons are not found in a particular region in space according to Heisenberg's uncertainty principle.

We rather define a certain region in space where there is a high probability of locating the electron. This region in space where there is a high probability of locating the electron is called an orbital.

Hence, in the Bohr's model of the atom,electrons can surely be found in orbits while in the wave mechanical model, the orbital is a probability function that describes a region in space where an electron may be found.

Answer:

C thermal

Explanation:

Answer: The correct option is C ( is very hard and burns cleanly).

Explanation:

COAL is a form of rock that is made up of mostly carbon amongst other elements which includes sulphur, nitrogen, hydrogen and oxygen. There are different types of coal which include:

--> anthracite ( 90% carbon)

--> bituminous coal ( 70-90% carbon)

--> lignite ( 60- 70% carbon) and

--> peat (60 % carbon).

Anthracite is the type of coal that contains the highest carbon content ( 90% carbon). This makes it very hard and is often a times referred to as HARD COAL. Anthracite is a higher quality coal for domestic and open fire heating. This is because it contains less impurities than other type of coal and thereby making it to BURN CLEANLY avoiding atmospheric pollution.

Answer:

c

Explanation:

Nh4OH + HCL ---> NH4Cl + H3O

so ph decreases as H3O increases

and OH also decreases

When NH4OH is added to a solution with HCI, the pH of the solution B ) increases as the OH- concentration increases.

NH₄OH is a strong base as a result of the presence of the OH compound which is a base as well. Bases have high pH and acids have low pH.

This means that as the OH- concentration increases, the solution is being made to be more basic which would lead to the pH rising.

In conclusion, option B is correct.

Find out more on Bases at https://brainly.com/question/15565260.

Answer:

all i can accurately say is that 2 and 4 are both true

Answer: Sugar solution shows no current flow in an electrolytic cell.

Explanation:

Electric current is the flow of ions or charged species from one point to another.

A solution that does not contain any ions is not able to conduct electric current.

Thus,, we can conclude that sugar solution shows no current flow in an electrolytic cell.

Answer:

thnx for the points too muchee

Explanation:

Answer:

Explanation:

[tex]{hope it helps}}[/tex]

Answer:

80 m/s.

Explanation:

NOTE: This is a physics question. However, the solution to the question given below:

From the question given above, the following data were obtained:

Acceleration (a) = 2 m/s²

Initial velocity (u) = 20 m/s

Time (t) = 30 s

Final velocity (v) =?

The final velocity of the train can be obtained as shown below:

v = u + at

v = 20 + (2 × 30)

v = 20 + 60

v = 80 m/s

Therefore, the final velocity of train is 80 m/s.

Answer: The statement conjugate base of hydrofluoric acid is weaker than that of acetic acid is most likely true.

Explanation:

A strong acid upon dissociation gives a weak conjugate base. This can also be said as stronger is the acid, weaker will be its conjugate base or vice-versa.

Hydrofluoric acid is a strong base as it dissociates completely when dissolved in water.

For example, [tex]HF \rightleftharpoons H^{+} + F^{-}[/tex]

The conjugate base is [tex]F^{-}[/tex] which is a weak base.

Acetic acid is a weak acid as it dissociates partially when dissolved in water. So, the conjugate base of acetic acid is a strong base.

[tex]CH_{3}COOH \rightarrow CH_{3}COO^{-} + H^{+}[/tex]

Thus, we can conclude that the statement conjugate base of hydrofluoric acid is weaker than that of acetic acid is most likely true.

The question is as follows: How many oxygen molecules are produced by the decomposition of 28.5 g of H2O2 (molecular mass = 34.0g / mol) according to the equation

2H2O2 (l) → 2H2O (l) + O2 (g)

Answer: There are [tex]2.52 \times 10^{23}[/tex] molecules are produced by the decomposition of 28.5 g of [tex]H_{2}O_{2}[/tex] according to the equation [tex]2H_{2}O(l) \rightarrow 2H_{2}O(l) + O_{2}(g)[/tex].

Explanation:

Given: Mass of [tex]H_{2}O_{2}[/tex] = 28.5 g

As moles is the mass of a substance divided by its molar mass. Hence, moles of [tex]H_{2}O_{2}[/tex] is calculated as follow.

[tex]Moles = \frac{mass}{molarmass}\\= \frac{28.5 g}{34.0 g/mol}\\= 0.838 mol[/tex]

According to the given equation, 2 moles of [tex]H_{2}O_{2}[/tex] gives 1 mole of [tex]O_{2}[/tex]. So, moles of [tex]O_{2}[/tex] produced by 0.838 moles of [tex]H_{2}O_{2}[/tex]  will be calculated as follows.

[tex]Moles of O_{2} = \frac{0.838 mol}{2}\\= 0.419 mol[/tex]

This means that moles of [tex]O_{2}[/tex] produced is 0.419 mol.

As per the mole concept, 1 mole of every substance has [tex]6.022 \times 10^{23}[/tex] molecules.

So, molecules of [tex]O_{2}[/tex] present in 0.419 mole are as follows.

[tex]0.419 \times 6.022 \times 10^{23}\\= 2.52 \times 10^{23}[/tex]

Thus, we can conclude that there are [tex]2.52 \times 10^{23}[/tex] molecules are produced by the decomposition of 28.5 g of [tex]H_{2}O_{2}[/tex] according to the equation [tex]2H_{2}O(l) \rightarrow 2H_{2}O(l) + O_{2}(g)[/tex].

Answer:

474. 64 mm Hg

Explanation:

using Boyle's Law that is

P1. V1 = P2. V2

655 × 10 = P2 × 13. 8

[tex]P2 = \frac{655 \times 10}{13.8} [/tex]

P2 = 474. 64 mm Hg

Answer:

huh what?

Explanation:

Is  196,96657  u

I hope I've helped :)

Answer:

Concentric circles

Explanation:

The energy levels are shown as concentric circles around the central nucleus, and the electrons are placed from the inside out. The first two electrons are found in the first energy level, and the third electron is found in the second energy level.

Answer:

Cr(NO3)3 (aq) +K3PO4 (s)

Explanation:

Answer:

exactly 0.10071444308 mols or just 0.1 mols

Explanation:

converting 6.4 g of copper to moles is done by using it's Molar Mass we can find the Molar Mass by lookin at the periodic table or just googling it. In this case, copper's molar mass is 63.546g per Mole. so thats 6.4/63.546 = 0.015736631731344 moles of copper