What could be used as another word for electrical potential
A.wattage

B.voltage

C.current

D.power

Answer:

i) The period of the particle is 0.3 seconds

ii) The angular velocity is approximately 20.94 rad/s

iii) The linear velocity is approximately 1.047 m/s

iv) The centripetal acceleration is approximately 6.98 m/s²

Explanation:

The given parameters are;

The number of revolution of the particle, n = 800 revolution

The time it takes the particle to make 800 revolutions = 4 minutes

The dimension of the circle = 5 cm = 0.05 m

Given that the dimension of the circle is the radius of the circle, we have;

i) The period of the particle, T = The time to complete one revolution

T = 1/(The number of revolutions per second)

∴ T = 1/(800 rev/(4 min × 60 s/min)) = 3/10 s

The period, T = 3/10 seconds = 0.3 seconds

ii) The angular velocity, ω = Angle covered/(Time)

800 revolutions in 4 minutes = Angle of (800 × 2·π) in 4 minutes

∴ ω = (800 × 2·π)/(4 × 60) = 20·π/3

The angular velocity, ω = 20·π/3 rad/s ≈ 20.94 rad/s

iii) The linear velocity, v = r × ω

∴ The linear velocity, v = 0.05 m × 20·π/3 rad/s = π/3 m/s ≈ 1.047 m/s

iv) The centripetal acceleration, [tex]a_c[/tex] = v²/r

∴ The centripetal acceleration, [tex]a_c[/tex] = (π/3)²/(0.05) = 20·π/9

The centripetal acceleration, [tex]a_c[/tex] = 20·π/9 m/s² ≈ 6.98 m/s²

Answer:

Explanation:

2. a

3. c

Fx = 295.4N

180°-90°-35°= 55°

F= m(a)

Fy = 43kg(9.81m/s²)

Fy = 421.83N

tan(55°) = 421.83N/Fx

Fx = 421.83N/tan(55°)

Fx = 295.3685458N

Each component describes the influence of that chain in the given direction. The vertical component describes the upward influence of the force upon Fido and the horizontal component describes the rightward influence of the force upon Fido.

The kinetic frictional force is always in the direction opposite to the velocity of the object.

Learn more about  horizontal component, refer

https://brainly.com/question/18333367

#SPJ2

Answer:

ccccccccc or bbbbbbb or aaaaaaaa or ddddddd

Answer:

Inertia can be defined as the tendency of an object or a body to continue in its state of motion or remain at rest unless acted upon by an external force.

Explanation:

Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.

This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.

Inertia can be defined as the tendency of an object or a body to continue in its state of motion or remain at rest unless acted upon by an external force.

Newton's First Law of Motion is also known as Law of Inertia and it states that, an object or a physical body in motion will continue in its state of motion at continuous velocity (the same speed and direction) or, if at rest, will remain at rest unless acted upon by an external force.

The inertia of an object such as a truck is greatly dependent or influenced by its mass; the higher quantity of matter in a trailer, the greater will be its tendency to continuously remain at rest.

In conclusion, inertia is applicable to all physical objects.

[tex]\\ \sf\longmapsto 300-70.5=229.5kJ[/tex]

We know

[tex]\boxed{\sf Efficiency=\dfrac{Used\:Energy}{Supplied\:Energy}\times 100}[/tex]

[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{300}\times 100[/tex]

[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{3}[/tex]

[tex]\\ \sf\longmapsto Efficiency=76.5\%[/tex]

Answer:

option a negative to positive

Explanation:

The flow of electrons is termed electron current. Electrons flow from the negative terminal to the positive. Conventional current or simply current, behaves as if positive charge carriers cause current flow. Conventional current flows from the positive terminal to the negative

brainliest plsss

Momentum is a quantity that we can say is typically conserved in collisions.

Momentum is the quantity that that we see typically conserve in the collision,therefore the correct answer is the option A

It is the type of collision in which the total momentum  as well as the kinetic energy on the system is conserved .The momentum before the collision is equal to the momentum after the collision in other words one can say in the elastic collision momentum of the quantity is conserved.

In the inelastic collision the momentum is conserved but the kinetic energy of the quantity is not conserved.

Momentum of a quantity is conserved irrespective of the type of collision  whether it will be elastic collision or inelastic collision the momentum of the quantity will always be conserved.

Hence,we can say that momentum is the quantity that is conserved in collision,The correct answer for the given problem is option A.

Learn more about the collision and from here

https://brainly.com/question/2356330

#SPJ2

Answer:

is 10³

Explanation:

cuz the formula of KE is 1/2mv²

covert 50g to kg first then plug in the formula

1/2 × 0.05 × 200 = 10³ J

Answer:

3:00 - 3:02 and 3:07 - 3:08

Explanation:

Those are the only intervals in which Jenny's speed increased.

Answer and Explanation:

To know where Jenny was positively accelerating, we have to find where the slopes on the graph are increasing (in the positive direction).

By looking at the graph, we can see that at the intervals:

3:00 to 3:02 and 3:07 to 3:08

Jenny was positively accelerating, as there is an increase in speed during these time intervals.

#teamtrees #PAW (Plant And Water)

I hope this helps!

Answer:

b

Explanation

vector is in x direction

Answer:

B. b

its the only vector that reaches up to 3 of the X axis.

Answer:

"For towing, a tow chain should be of a length that keeps both vehicles within the maximum 4.5 meter distance, also  tow chains an be any length 20 foot chains are often chosen"  

Explanation:

-  https://letstowthat.com

Also Quick note the feet of tow rope or chain varies on the situation but most longest or 20 feet.  

Answer:

a. 0

b. 1.103625 MJ

c. Conserved

d. 1.103625/n MJ where n = The number of forces

Explanation:

The mass of the drone, m = 750 kg

The upward lift force = 125% of the weight of the drone

The time it takes the drone to reach a height of 250 m = 25 seconds

a. The mechanical energy = The kinetic energy + Potential energy

Therefore, given that the drone stars motion from the surface and was initially at rest, the mechanical energy at the surface = 0

b. The mechanical energy at height, h = 150 m, ME₁₅₀ = The potential energy gained = m·g·h

Where;

g = The acceleration due to gravity = 9.81 m/s²

∴ ME₁₅₀ = 750 kg × 9.81 m/s² × 150 m = 1103625 J = 1.103625 MJ

c. The mechanical energy is equivalent to the potential energy of the drone at the 150 m height, therefore, it is conserved

d. The work done by the force = The energy gained

Therefore, where there are n number of forces, the work done by each force = 1.103625/n MJ

Answer:

D

Explanation:

i just did it trust me

Answer:

A. When the independent variable is continuous and shows a causal link to the dependent variable.

Explanation:

A graph can be defined as the graphical representation of data (informations) on horizontal and vertical lines i.e x-axis and y-axis respectively.

In an experiment , the variable being manipulated by an experimenter is known as an independent variable while the dependent variable is the event expected to change when the independent variable is manipulated

Generally, a line graph should be used when the independent variable is continuous and shows a causal link to the dependent variable.

This ultimately implies that, a line graph should be used when the data changes continuously over time and as such there exist a linear relationship between the data (variables).

Answer:

the magnetic compass is used to determine direction because it is one of the most accurate form of magnet as we already know that a freely suspended magnet always faces towards north direction and south direction

Answer:

  96 m

Explanation:

The average velocity over those 4 seconds is the velocity after 2 seconds:

  30 m/s -(2 s)(3.0 m/s^2) = 24 m/s

The displacement is the product of this average velocity and the duration of the acceleration:

  d = (24 m/s)(4 s) = 96 m

The boat covered 96 m while being accelerated.

Answer:

When a tree is vigorously shaken, the branches of the tree come in motion but the leaves tend to continue in their state of rest due to inertia of rest. As a result of this, leaves get separated from the branches of the tree and hence fall down.

Answer:

When a tree is vigorously shaken, the branches of the tree come in motion moving left and right and shake the leaves off, that's why some of the tree got detached when we vigorously shake its branch.

Explanation:

Like I did in the answer section.

Answer:

the angle of banking is 33.3 degree.

Explanation:

speed, v = 99 mi/h = 44.26 m/s  

radius, r = 1000 ft = 304.8 m

g = 9.8 m/s^2

Let the angle of banking is A.

[tex]tan A = \frac{v ^2}{r g}\\\\tan A = \frac{44.26^2}{304.8\times 9.8}\\\\tan A = 0.66\\\\A = 33.3^0[/tex]

Answer:

The person feels cool at first because the swimming pool water is usually cool and he/she has that water on his body. But when it evaporates, the cool air directly touches his body and that's why he/she feels cold.

Thank You! Please mark me Brainliest!

Answer:

if buoyant force is equal is equal to the weight of body then our body float. if density of our body is less than density of liqiud then our body float in water.

Answer:

Explanation:

Because vectors have direction and x and y components you can't just add them and say that their length is 16 because A is 8 units and so is B. What you're actually finding is the magnitude and direction of the vector that results from this addition. The magnitude is the length of the resultant vector, which comes from the x and y components of A and B, and the direction is the angle between the resultant vector and the positive x axis. To add the vectors, then, we need to find the x and y components of each. We'll do the x components of A and B first so we can add them to get the x component of C. Since x values are directly related to cos, the formula to find the x components of vectors is

[tex]V_x=Vcos\theta[/tex] which is the magnitude of the vector (its length) and the angle. Finding the x components of A:

[tex]A_x=8.0cos45[/tex] so

[tex]A_x=5.7[/tex] and for B:

[tex]B_x=8.0cos180[/tex] since the negative x axis is the 180 degree axis and

[tex]B_x=-8.0[/tex] If we add them, we get

[tex]C_x=-2.3[/tex]

Now onto the y components. The formula for that is almost the same as the x components except use sin instead of cos:

[tex]A_y=8.0sin45[/tex] so

[tex]A_y=5.7[/tex] and

[tex]B_y=8.0sin180[/tex] so

[tex]B_y=0[/tex] If we add them, we get

[tex]C_y=5.7[/tex]

Now for the final magnitude:

[tex]C_{mag}=\sqrt{(-2.3)^2+(5.7)^2}[/tex] and

[tex]C_{mag}=6.1 units[/tex] and now onto the direction.

The x component of C is positive and the y component is negative, which means that the direction has us at an angle is quadrant 2; we add 180 to whatever the angle is. Finding the angle:

[tex]tan^{-1}(\frac{C_y}{C_x})=(\frac{5.7}{-2.3})[/tex] = -68 + 180 = 112 degrees

The resultant vector of A + B has a magnitude of 6.1 and a direction of 112°

Do the same thing for subtraction, except if you're subtracting B from A, the direction that B is pointing has to go the opposite way. That means that A doesn't change anything at all, but B is now pointing towards 0.

[tex]A_x=5.7[/tex] (doesn't change from above)

[tex]B_x=8.0cos0[/tex] and

[tex]B_x=8.0[/tex] so

[tex]C_x=13.7[/tex] and

[tex]A_y=5.7[/tex] (also doesn't change from above)

[tex]B_y=8.0sin0[/tex] so

[tex]B_y=0[/tex] and

[tex]C_y=5.7[/tex] and for the magnitude:

[tex]C_{mag}=\sqrt{(13.7)^2+(5.7)^2[/tex] so

[tex]C_{mag}=15units[/tex] and for the direction:

[tex]tan^{-1}(\frac{5.7}{13.7})=23[/tex] and since both x and y components of C are in Q1, we add nothing.

And you're done!!!

Answer:

42g

Explanation:

the mass of a body is given by

m=weight/gravity

=420/10

=42

I hope this helps

Answer:

Amplitude.

Explanation:

A wave can be defined as a disturbance in a medium that progressively transports energy from a source location to another location without the transportation of matter.

In Science, there are two (2) types of wave and these include;

I. Electromagnetic waves: it doesn't require a medium for its propagation and as such can travel through an empty space or vacuum. An example of an electromagnetic wave is light.

II. Mechanical waves: it requires a medium for its propagation and as such can't travel through an empty space or vacuum. An example of a mechanical wave is sound.

An amplitude can be defined as a waveform that's measured from the center line (its origin or equilibrium position) to the bottom of a trough or top of a crest.

Hence, an amplitude is a word that describes the maximum displacement a point moves from its rest position when a wave passes.

On a graph, the vertical axis (y-axis) is the amplitude of a waveform and this simply means that, it's measured vertically.

Mathematically, the amplitude of a wave is given by the formula;

x = Asin(ωt + ϕ)

Where;

x is displacement of the wave measured in meters.

A is the amplitude.

ω is the angular frequency measured in rad/s.

t is the time period measured in seconds.

ϕ is the phase angle.

Answer:

Those reaction in which one element replaces another element form its place is called Single displacement reaction

Answer:

I_syst = 278.41477 kg.m²

Explanation:

Mass of platform; m1 = 117 kg

Radius; r = 1.61 m

Moment of inertia here is;

I1 = m1•r²/2

I1 = 117 × 1.61²/2

I1 = 151.63785 kg.m²

Mass of person; m2 = 62.5 kg

Distance of person from centre; r = 1.05 m

Moment of inertia here is;

I2 = m2•r²

I2 = 62.5 × 1.05²

I2 = 68.90625 kg.m²

Mass of dog; m3 = 28.3 kg

Distance of Dog from centre; r = 1.43 m

I3 = 28.3 × 1.43²

I3 = 57.87067 kg.m²

Thus,moment of inertia of the system;

I_syst = I1 + I2 + I3

I_syst = 151.63785 + 68.90625 + 57.87067

I_syst = 278.41477 kg.m²

Answer:

Crumple zones are designed to absorb and redistribute the force of a collision. ... Also known as a crush zone, crumple zones are areas of a vehicle that are designed to deform and crumple in a collision. This absorbs some of the energy of the impact, preventing it from being transmitted to the occupants.

Answer:

Explanation:

The heat from the Sun gets to the surface of the Earth by radiation and not by convection because:

i. Radiation does not require material medium for its propagation: Since the space between the Sun and Earth is a vacuum ( i.e it is an empty space), then the only method for the heat from to Sun to get to the Earth is by radiation. This method does not require a material medium, while convection is a method that requires material medium for its propagation.

ii. Radiation occurs without heating the intervening medium: During the propagation of the heat from the Sun to the Earth, the space between the two heavenly bodies is not heated up. Some fraction of the heat after hitting the surface of the Earth get reflected back into the Earth's atmosphere. While in convection, the medium would have been heated up in the process.

Answer:

Acceleration, rate at which velocity changes with time, in terms of both speed and direction. A point or an object moving in a straight line is accelerated if it speeds up or slows down. ... Acceleration is defined as the change in the velocity vector in a time interval, divided by the time interval.

Answer:

The rate of change in velocity with time A=finall velocity _intial velocity upon time