Answer:
Disulfate Ion {2-} Name: Disulfate Ion {2-} Formula: S2O7.
Explanation:
HOPE THIS HELPED :)
Answer:
Pyrosulfate
In chemistry, disulfate or pyrosulfate is the anion with the molecular formula S₂O²⁻₇. Disulfate is the IUPAC name. It has a dichromate-like structure and can be visualised as two corner-sharing SO₄ tetrahedra, with a bridging oxygen atom. In this anion, sulfur has an oxidation state of +6. Disulfate is the conjugate base of the hydrogen disulfate ion HS₂O⁻₇, which in turn is the conjugate base of disulfuric acid.
Explanation:
In chemistry, disulfate or pyrosulfate is the anion with the molecular formula S 2O2− 7. Disulfate is the IUPAC name. It has a dichromate -like structure and can be visualised as two corner-sharing SO 4 tetrahedra, with a bridging oxygen atom. In this anion, sulfur has an oxidation state of +6.
the rule of eight chemistry
Answer:
octet rule
Explanation:
It refers to the tendency of atoms to prefer to have eight electrons in the valence shell.
The limiting reactants appeared to be _______
Because___________
Answer:
The limiting reagents seemed to be those that were consumed first .
Because when this reagent is consumed, the reaction stops. The quantity of this determines the total quantity of the product formed.
Explanation:
A limiting reagent is one that is consumed in its entirety. In this way, it delimits the amount of product that can be formed.
Take the case of two substances that interact and produce a chemical reaction. If one of the substances runs out as it is consumed during the process, the reaction will stop. The reagent consumed acts as a limiting reagent, that is, it limits the possibility of the reaction proceeding, and therefore it also limits the amount of the product generated by the reaction.
The mass of single iridium atom is 3.19*10^-22 grams how many iridium atoms would be in 56.4 milligrams of iridium
At what temperature will a gas be, if you allow it to expand from its original volume of 756 mL at 65.0 °C to 1.40 L? (hint volume needs to be the same)
Answer:
120.4 gradius Celcius
Explanation:
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
What are 3 stages of the water cycle are
A solution of KOH has a [OH-] concentration of 0.045 M. What is the pOH of the solution? *
1 point
-1.3
1.3
1.1
0.90
what is the answer?
Answer:
[tex]pOH=1.3[/tex]
Explanation:
Hello,
In this case, since pH is computed by knowing the concentration of hydrogen ions, one could compute the pOH by knowing the concentration of the hydroxyl ions as in this case which is 0.045M as shown below:
[tex]pOH=-log([OH^-])=-log([0.045])\\\\pOH=1.3[/tex]
Best regards.
Answer:
The pOH of the 0.045 M solution is 1.3
The second option (1.3) is correct
Explanation:
Step 1: Data given
Concentration [OH-] of KOH is 0.045 M
Step 2: Calculate pOH
pOH = -log[OH-]
pOH = -log (0.045)
pOH = 1.3
The answer:
The pOH of the 0.045 M solution is 1.3
The second option (1.3) is correct
18.35 mL of an HCN solution were titrated with 35.4mL of a 0.268M NaOH solution to reach the equivalence point. What is the molarity of the HCN solution
Answer:
0.517
Explanation:
HCN + NaOH → NaCN + H2O [balanced as written]
(35.4 mL) x (0.268 M NaOH) x (1 mol HCN / 1 mol NaOH) / (18.35 mL HCN) = 0.517 M HCN
Answer: 0.517
Explanation:
3Fe + 2O2 → Fe3O4 In this reaction, 200 grams of Fe react with 64 grams of O2. How many grams of Fe3O4 will be produced? A 230 grams B 264 grams C 280 grams D 460 grams
Answer:
just did it the answers b
Explanation:
If a 1.45 M solution has 2.43 g HCl dissolved, what is the volume of solution? (Change g HCl into mol using molar mass)
Answer: The volume of solution is 0.0459 L
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution
[tex]Molarity=\frac{n}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in L
moles of HCl (solute) = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{2.43g}{36.5g/mol}=0.0666[/tex]
Now put all the given values in the formula of molality, we get
[tex]1.45M=\frac{0.0666}{V_s}[/tex]
[tex]V_s=\frac{0.0666}{1.45}=0.0459[/tex]
Therefore, the volume of solution is 0.0459 L
What parts of the body are tested for rigor Mortis
How many grams of californium-254 will remain after 363 days if we
start with 64.0 grams of this substance? The half-life of californium-254
is 60.5 days.
Answer:
1.02 g OF CALIFORNIUM-254 WILL REMAIN AFTER 363 DAYS IF 64 g REACTS WITH HALF LIFE OF 60.5 DAYS.
Explanation:
Half life of a chemical reaction is the time required for a radioactive element to decay to half its original mass.
We will use the formula:
Nt = No (1/2)^t/t1/2 where;
Nt = quantity of substance remaining = unknown
No = original mass of the substance = 64 g
t = time elapsed = 363 days
t1/2 = half life of the substance = 60.5 days
Putting the values into the equation, we have:
Nt = 64 * (1/2)^(363/60.5)
Nt = 64 * (1/2) ^6
Nt = 64 * 0.015625
Nt = 1.0156
The amount of californium-254 remaining after 363 days is approximately 1.02 g
HELP PLEASE ILL GIVE 25 pointsWhich of the following practices could help reduce erosion of water banks? a. buffer strips b. natural fertilizers and pesticides c. decrease in fossil fuel emissions d. all of the above Please select the best answer from the choices provided A B C D
Answer:
A. Buffer strips
Explanation:
The practice that could help reduce erosion of water banks is buffer strips.
What is erosion?Erosion is the action of surface processes that removes soil, rock or dissolved material from one location on the Earth's crust, and then transports it to another location where it is deposited.
One of the practices that could be used to reduce the effect of erosion is buffer strips.
What buffer strips do is slow and filter storm runoff while helping to hold soil in place.
Learn more on buffer strips here; https://brainly.com/question/26872640
A sample of helium gas at room temperature is compressed from 100 cm3 to 20 cm3. Its new pressure is now 30 cm Hg. What was the original pressure of the gas?
Answer:
6 cm Hg
Explanation:
Boyles Law: P1V1=P2V2
(100 mL)(x)=(20 mL)(30 cm Hg)
x = 6 cm Hg
*Text me at 561-400-5105 for private tutoring if interested: I can do homework, labs, and other assignments :)
PLEASE help! BRAINLIEST to correct answer!
Answer:
C
Explanation:
Answer:
I think its q
Explanation:
h is the Planck constant, c the speed of light
An empty weighing dish has a mass of 1.0041 ± 0.0002 g. After you add dried sodium chloride to the dish, the mass is 3.2933 ± 0.0002 g. You quantitatively transfer the sodium chloride into a 500.00 ± 0.05 mL volumetric flask and dilute to the mark with deionized water. The molar mass of sodium chloride is 58.440 g/mol. What is the absolute error in the concentration of the resulting solution? Report your answer normally to the correct number of significant figures with the correct unit.
Answer:
The correct answer to the following question will be "0.0013%".
Explanation:
The given values are:
Weight of an empty dish = 1.0041 ± 0.0002 g
Weight of dish + sodium chloride (NaCl) = 3.2933 ± 0.0002 g
Weight of NaCl = 2.2892 ± 0.0002 g
Now,
Volume of the solution = 500.00 ± 0.05 ± 0.0002
= 500.00 ± 0.0502 ml
So,
Molarity = [tex]\frac{W \ NaCl}{M \ NaCl} \times \frac{1000}{Volumes \ of \ solution}[/tex]
On putting the values in the above formula, we get
= [tex]\frac{(2.2892\addeq +0.0002)}{58.440}\times \frac{1050}{(500.00+0.0502)}[/tex]
= ([tex]3.917[/tex] ± [tex]0.0002[/tex]) × ([tex]2[/tex] ± [tex]0.0502[/tex])
= ([tex]0.7834[/tex] ± [tex].00001004[/tex])
Now,
Absolute error = [tex]\frac{0.00001004}{0.7834}\times 100[/tex]
= [tex]0.0013[/tex]%
A child shivers in a cold rain but does not feel cold, what is the biochemistry behind it
Answer:
Homeostasis is defined as the process by which the internal body system maintains a suitable environment for its proper functions and survival.
When a person temperature drops a signal is sent to the brain which results in a reflex action being observed. The shiver makes the individual warmer and helps in the regulation of the body heat.
The radioactivity due to carbon-14 measured in a piece of a wooden casket from an ancient burial site was found to produce 20 counts per minute from a given sample, whereas the same amount of carbon from a piece of living wood produced 160 counts per minute. The half-life of carbon-14, a beta emitter, is 5730 years. Thus we would estimate the age of the artifact to be about?
Answer:
17202.6 years
Explanation:
Activity of the living sample (Ao) = 160 counts per minute
Activity of the wood sample (A) = 20 counts per minute
Half life of carbon-14 = 5730 years
t= age of the artifact
From;
0.693/t1/2= 2.303/t log Ao/A
Then;
0.693/ 5730= 2.303/t log Ao/A
Substituting values;
0.693/5730= 2.303/t log (160/20)
Then we obtain;
1.209×10^-4 = 2.0798/t
t= 2.0798/1.209×10^-4
Thus;
t= 17202.6 years
Therefore the artifact is 17202.6 years old.
what numbers go in the blank _Na2Co3+_HCI > _NaCl+H2O+_CO2
Answer: [tex]Na_2CO_3+2HCl\rightarrow 2NaCl+H_2O+CO_2[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The balanced chemical equation will be:
[tex]1Na_2CO_3+2HCl\rightarrow 2NaCl+H_2O+1CO_2[/tex]
Thus the numbers that go in the blanks are 1, 2, 2, and 1 respectively for [tex]Na_2CO_3[/tex], [tex]HCl[/tex] , [tex]NaCl[/tex] and [tex]CO_2[/tex] respectively.
Sometimes in lab we collect the gas formed by a chemical reaction over water (see sketch at right). This makes it easy to isolate and measure the amount of gas produced.
Suppose the CO gas evolved by a certain chemical reaction taking place at 55 degree C is collected over water, using an apparatus something like that in the sketch, and the final volume of gas in the collection tube is measured to be 117 ml.
Calculate the mass of CO that is in the collection tube. Round your answer to 2 significant digits. You can make any normal and reasonable assumption about the reaction conditions and the nature of the gases.
Answer:
The correct answer is 0.12 grams.
Explanation:
The mass of carbon monoxide or CO collected in the tube can be determined by using the ideal gas equation, that is, PV = nRT.
Based on the given question, P or the pressure of the gas is given as 1 atm, volume of the gas collected in the tube is 117 ml or 0.117 L.
The number of moles or n can be determined by using the equation, mass/molar mass.
R is the universal gas constant, whose value is 0.0821 L atmK^-1mol^-1, and temperature is 55 degree C or 328 K (55+273).
On putting the values we get:
n = PV/RT
= (1 atm*0.117 L) / (0.0821 L atmK^-1mol^-1 * 328 K)
= 0.0043447 mol
Therefore, mass of CO will be moles * molar mass of CO
= 0.0043447 mol * 28 g/mol
= 0.12 g
Argon-40 undergoes positron emission as shown:
48 Ar X+ IB
Enter the appropriate values for A and Z and the chemical
symbol for X
Answer:
[tex]\frac{40}{18}Ar => \frac{40}{17}Cl + \frac{0}{1}e\\[/tex]
Explanation:
The process of positron emission is better understood by the following reaction:
[tex]\frac{40}{18} Ar[/tex] → + [tex]\frac{40}{17} Cl + \frac{0}{1} e[/tex]. What is Positron emission?Positron emission may be defined as a subordinate type of radioactive decay called which is effectively known as beta decay. Due to this emission, a proton that is present inside a radionuclide nucleus significantly transformed into a neutron while liberating a positron and an electron neutrino.
According to the context of this question, Argon-40 undergoes the process of beta decay. Through which X element is formed which is known as chlorine. The atomic number (Z) of chlorine is 17, while the atomic mass (A) is 40 which is as identical to argon.
Therefore, the appropriate values for A and Z and the chemical symbol for X are 40 and 17 respectively.
To learn more about Positron emission, refer to the link:
https://brainly.com/question/4598666
#SPJ2
What is the mass defect of a mole of nuclei with 1.8 x 10^15 J/mol binding
energy?
Answer:
2.0 x 10^-2 kg/mol
Explanation:
which sublevels contain valence electrons in an atom of nitrogen
Sublevel 2s and 2p contains the valence electrons for nitrogen.
What is the molar mass of ethanol (C2H60)?
Answer:
46.07 g/mol is the molar mass of ethonal
which would dissolve faster individual salt crystals a big block of salt
Answer:
Table salt (the iodine isn't important) consists of much smaller particles than rock salt and therefore has a much higher ratio of surface area to mass. Since chemical reactions occur at surfaces,the smaller table salt particles will dissolve far more quickly than the larger rock salt.
Explanation:
Answer:
Individual salt crystals
Explanation:
A given quantity of solute dissolves faster when it is ground into small particles than if it is in the form of a large chunk because more surface area is exposed.
Give me a good review if right please.
If a solution has a pOH=12, what is its pH?
Answer:
2
Explanation:
pH+pOH=14
- Hope that helps! Please let me know if you need further explanation.
Answer:
2
Explanation:
Ph+PoH=14
Which characteristic of a substance is considered a chemical property
Answer:
c
Explanation:
Two identical light bulbs are connected to a battery in a series circuit.
An ammeter is wired into the circuit at measures a current of the
battery to be 0.5 Amps. The two light bulbs are then wired in parallel.
The ammeter shows that the current:
Answer:
0.10 amps
Explanation:
What is the hydrogen ion concentration [H+] of a HCl solution if the pH is measured to be 2.0?
Answer:
.01
Explanation:
H+=10^-pH
- Hope that helps! Please let me know if you need further explanation.
What is the molarity of a solution in
which 3.8 moles of sodium chloride
(NaCl) is dissolved in water to a final
volume of 2.5 L?
Answer:
1.52M in NaCl
Explanation:
Molarity = moles solute / volume solution in Liters
=> molarity (M) = 3.8 moles / 2.5 Liters solution = 1.52 molar solution in NaCl
Answer: 1.52
Explanation:
I'll give you the brainiest please help.
Answer:
c
Explanation:
