Explanation:
Sorry, I don't know, but I can tell you that when an atom, or a body, has the same amount of positive charges (protons) and negative charges (electrons), it is said to be electrically neutral. ... The net charge corresponds to the algebraic sum of all the charges that a body possesses.
Answer: Neutral carbon-12 (or any carbon atom) has 6 electrons with a total negative charge of 6e- orbiting a nucleus with a total positive charge of 6e+, so that the total net charge is zero. The nucleus is made up of 6 protons, each with a positive charge of e+, and 6 neutrons, each with zero charge.
Explanation:
If the pressure of 50.0 mL of oxygen gas at 100°C increases from 735 mm Hg to 925 mm Hg, what is
the final volume? Assume temperature remains constant.
Answer: .039L
Explanation:
Calculate the number of molecules present in 11 moles of H2O.
Answer:
[tex]11 \times 6.022 \times {10}^{23} \\ = 66.242\times {10}^{23} \: of \: \\ water \: molecules[/tex]
How many moles of c3h6will be consumed when 4.11 mol of co2 are produced in the following equation 2c3h6 +9o2 - 6co2 + 6H2o
Answer: a.1.37 b.4.11 c.6.00 d.12.3
Explanation:
The Law of Conservation of Energy states that Energy can neither be ____________ nor _____________ but only change from one __________ to another.
Answer:
Explanation:
The law of conservation of energy states that energy can neither be created nor destroyed but only changed from one form of energy to another.
The law of conservation of energy states that energy can neither be created nor destroyed but changes from one state to another.
What is law of conservation of energy?The law of conservation of energy states that energy can neither be created nor destroyed it can only be converted from one form of energy to another.According to this, the total energy of the system remains constant.
This statement is also a statement of first law of thermodynamics which is based on energy.Conservation of energy is distinct from conservation of mass as mass and energy are directly proportional which is given the equation, E=mc².
Because of law of conservation of energy the perpetual motion of machine cannot exist. This means that no system without an external source of energy can supply unlimited amount of energy to its surroundings.
Learn more about law of conservation of energy,here:
https://brainly.com/question/12050604
#SPJ6
Select the container from the figure (Figure 1) that represents the dilution of a 4 % (m/v) KCl solution to each of the following: Figure1 of 1 There is a diagram showing several containers. One container is filled with 4 percent of mass to volume solution of NaCl. Container 1 is filled with a solution in which volume is two times less than the volume of NaCl solution. Container 2 is filled with a solution of a volume two times larger compared to the NaCl solution. Container 3 is filled with a solution of a volume two times larger than the volume of the solution in container 2. Part A 2 % (m/v) KCl
From the dilution formula, we have that at constant value of the solute, the volume of the solution is inversely proportional to the concentration.
The correct responses are;
Part A: Container 2Part B: Container 3Reasons:
The given parameters are;
The concentration of the KCl solution = 4% m/v
Taking the solution as solution of KCl
The volume of the solution in container 1 = Two times less than the volume of KCl solution.
[tex]V_{container \, 1} = \displaystyle \mathbf{ \frac{1}{2} \cdot V_{4\% \, solution}}[/tex]
The volume of the solution in container 2 = Two times larger compared to the volume of KCl solution.
[tex]V_{container \, 2} = \mathbf{\displaystyle 2 \times V_{4\% \, solution}}[/tex]
The volume of the solution in container 3 = Two times larger than the container two solution volume.
[tex]V_{container \, 3} = \displaystyle \mathbf{ 2 \times V_{container \, 2}}[/tex]
Therefore;
[tex]V_{container \, 3} = \displaystyle 2 \times 2 \times V_{4\% \, solution} = \mathbf{4 \times V_{4\% \, solution }}[/tex]
Part A Required:
a. To select the container that represent the dilution of the 4% solution to 2%
Solution:
The dilution formula is; C₁·V₁ = C₂·V₂
Therefore;
[tex]\displaystyle V_1 = \mathbf{\frac{C_1 \cdot V_1}{C_2}}[/tex]
C₁ =4%, C₂ = 2%, we get;
[tex]\displaystyle V_1 = \frac{4 \cdot V_1}{2} = 2 \cdot V_1[/tex]
The volume of the container that represents a 2% dilution is container 2
which is filled with a solution of a volume two times larger compared to the
KCl solution.
Part B:
Required:
The container diluted to a 1% m/v KCl solution.
Solution;
Using the dilution formula, we have;
C₁ = 4%, C₂ = 1%
Therefore;
[tex]\displaystyle V_1 = \frac{C_1 \cdot V_1}{C_2}[/tex]
[tex]\displaystyle V_1 = \frac{4 \cdot V_1}{1} = \mathbf{4 \cdot V_1}[/tex]
The volume of the solution is four times the volume of the 4% KCl solution, which is equivalent to the volume in container 3.
Possible parts of the question are;
Select the container that represents the dilution of the 4% (m/v) KCl solution to obtain the solutions that follows;
Part A: a 2% (m/v) KCl solution
Part B: a solution that is a 1% (m/v) KCl solution
Please see attached drawings
Learn more here:
https://brainly.com/question/11493179
In the following reaction, what is the quantity of heat (in kJ) released when 5.87 moles of CH₄ are burned?
CH₄ (g) + 2 O₂ (g) → CO₂ (g) + 2 H₂O(g) ∆H° = -802 kJ/mol
Taking into account the definition of enthalpy of a chemical reaction, the quantity of heat released when 5.87 moles of CH₄ are burned is 4,707.74 kJ.
The enthalpy of a chemical reaction as the heat absorbed or released in a chemical reaction when it occurs at constant pressure. That is, the heat of reaction is the energy that is released or absorbed when chemicals are transformed into a chemical reaction.
The enthalpy is an extensive property, that is, it depends on the amount of matter present.
In this case, the balanced reaction is:
CH₄ (g) + 2 O₂ (g) → CO₂ (g) + 2 H₂O(g)
and the enthalpy reaction ∆H° has a value of -802 kJ/mol.
This equation indicates that when 1 mole of CH₄ reacts with 2 moles of O2, 802 kJ of heat is released.
When 5.87 moles of CH₄ are burned, then you can apply the following rule of three: if 1 mole of CH₄ releases 802 kJ of heat, 5.87 moles of CH₄ releases how much heat?
[tex]heat=\frac{5.87 molesof CH_{4}x802 kJ}{1 mol of CH_{4} }[/tex]
heat= 4,707.74 kJ
Finally, the quantity of heat released when 5.87 moles of CH₄ are burned is 4,707.74 kJ.
Learn more:
https://brainly.com/question/15355361?referrer=searchResultshttps://brainly.com/question/16982510?referrer=searchResultshttps://brainly.com/question/13813185?referrer=searchResultshttps://brainly.com/question/19521752as the solar nebula cooled which compounds were the first to condense from a gas to a solid? Rock water ice or metal
As the solar nebula cooled METAL compounds are the first to condense from a gas to a solid. The solar nebula gave birth to the Solar system.
A solar nebula is a disc-shaped cloud of gases and grain dust, which gave birth to the Sun and planets of the Solar system, approximately 4.6 billion years ago.
The solar nebula is at the beginning a mixture of interstellar gases (hydrogen and helium) and dust grains.
As the solar nebula cools, heavy elements such as metals in the disk condensate into planetesimals.
Learn more in:
https://brainly.com/question/14151385
A stock solution containing Mn2 ions was prepared by dissolving 1.269 g pure manganese metal in nitric acid and diluting to a final volume of 2.000 L. The following solutions were then prepared by dilution: For solution A, 40.00 mL of stock solution was diluted to 1500.0 mL. For solution B, 10.00 mL of solution A was diluted to 250.0 mL. For solution C, 20.00 mL of solution B was diluted to 550.0 mL. a Calculate the concentration of the stock solution.
Answer:
B.
Explanation:
Hope this helpssss
<33
Compare the alkali metals and alkaline earth metals with respect to (i) Ionization enthalpy (ii) basicity of oxides (iii) solubility of hydroxide
Answer:
Ionization enthalpy
Explanation:
that should be right
Which statement best describes a mechanical wave?
Answer:
A mechanical wave is a wave that is an oscillation of matter, and therefore transfers energy through a medium.
Explanation:
While waves can move over long distances, the movement of the medium of transmission—the material—is limited. Therefore, the oscillating material does not move far from its initial equilibrium position.
--------------
hope this helped!
✼-answers by brookeangelx
The wave transmits energy from one point to another in the form of signals. Some waves require a medium for propagation while some others does not require a medium for the propagation.
What is a mechanical wave?The mechanical wave is defined as the wave which involves the oscillation of matter and it is responsible for the transfer of energy through a medium. These types of waves does not need a medium for propagation.
The mechanical waves cannot travel through vacuum. Some of the examples of mechanical waves are sound waves, water waves, seismic waves, etc. These waves are not capable of transmitting its energy through a vacuum.
The sound wave is a mechanical wave and the medium which it propagates can be solid, liquid or gas. It can travel fastest in solids and slower in gases.
Thus mechanical wave is an oscillation of matter.
To know more about mechanical wave, visit;
https://brainly.com/question/26116832
#SPJ6
pls help see attached pic for the question.
Answer: Evaporation and sublimation.
Explanation: Evaporation is the process of changing from liquid to gas, and sublimation is the process of changing from solid to gas.
0 000
which explains why it is important to eat a full healthy meal before an oron o ping po
Food provides the carbon dioxide that is a product of cellular respiration
Food provides the oxygen that is a product of cellular respiration
Food provides the glucose that is a reactant in cellular respiration.
Food provides the energy that is a reactant in cellular respiration.
Answer:
A healthy diet is essential for good health and nutrition. It protects you against many chronic noncommunicable diseases, such as heart disease, diabetes and cancer. Eating a variety of foods and consuming less salt, sugars and saturated and industrially-produced trans-fats, are essential for healthy diet.
Find the volume of 0.170 M sulfuric acid necessary to react completely with 72.2 g sodium hydroxide.
The volume of sulphuric acid, H₂SO₄ needed for the complete reaction with 72.2 g of sodium hydroxide, NaOH is 5.31 L
We'll begin by calculating the number of mole in 72.2 g of NaOH. This can be obtained as follow:
Mass of NaOH = 72.2 g
Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol
Mole of NaOH =?Mole = mass / molar mass
Mole of NaOH = 72.2 / 40
Mole of NaOH = 1.805 mole Next, we shall determine the number of mole of H₂SO₄ needed to react with 1.805 mole of NaOH.2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O
From the balanced equation above,
2 moles of NaOH reacted with 1 mole of H₂SO₄.
Therefore,
1.805 mole of NaOH will react with = 1.805 / 2 = 0.9025 mole of H₂SO₄.
Finally, we shall determine the volume of H₂SO₄.Mole of H₂SO₄ = 0.9025 mole
Molarity of H₂SO₄ = 0.170 M
Volume of H₂SO₄ =?Volume = mole / Molarity
Volume of H₂SO₄ = 0.9025 / 0.170
Volume of H₂SO₄ = 5.31 LThus, the volume of H₂SO₄ needed for the reaction is 5.31 L
Learn more: https://brainly.com/question/14356462
A chemical reaction involves the reactants A and B, and the product C.
A+B→C
Trial 1 2 3
[A](mol/L) 0.10 0.10 0.20
[B](mol/L) 0.10 0.20 0.10
−Δ[A]Δt(molL s) 3.08×10−9 2.464×10−8 1.232×10−8
Explanation:
a+b =ab
answer
ab added all
is give answer
what is the best way to make a supersaturated solution?
A: Heat the solution
B: Stir the Solution
C: Evaporate the solution
D: Cool the solution
Answer:
heat the solution
Explanation:
i think
Answer:
The way to make a supersaturated solution is to add heat, but just a little heat won't do the job. You have to heat the water close to the boiling point. When the water gets this hot, the water molecules have more freedom to move around, and there is more space for solute molecules between them.
In the laboratory you are asked to make a 0.282 m manganese(II) acetate solution using 315 grams of water. How many grams of manganese(II) acetate should you add
Answer:315 - 282 = 173?
Explanation:
The melting point of H₂O(s) is 0 °C. Would you expect the melting point of H₂S(s) to be 85 °C, 0 °C or -85 °C.? Justify your choice
Answer:
-85 °C
Explanation:
O and S are in the same group( Group 16). Since S is below O it's atomic mass is higher than O. So molar mass of H2S is higher than H2O. The strength of Vanderwaal Interactions ( London dispersion forces) increases when the molar mass increases. However, only H2O can form H bonds with each other. This is because electronegativity of O is higher than S and therefore H in H2O has a higher partial positive charge than H of H2S.
H bond dominate among these 2 types of forces so the strength of attractions between molecules is higher in H2O than H2S. Therefore more energy should be supplied for H2O to break inter
molecular forces and convert from solid to liquid state than H2S. So mpt of H2O must be higher than that of H2S.
For the oxidation–reduction reaction equation
2Sc+3Br2⟶2ScBr3
indicate how many electrons are transferred in the formation of one formula unit of product.
In the formation of 1 formula unit of ScBr₃, 3 electrons are transferred.
Let's consider the following balanced redox reaction.
2 Sc + 3 Br₂ ⟶ 2 ScBr₃
We can identify both half-reactions.
Oxidation: 2 Sc ⟶ 2 Sc⁺³ + 6 e⁻
Reduction: 6 e⁻ + 3 Br₂ ⟶ 6 Br⁻
As we can see, 6 electrons are involved in the formation of 2 formula units of ScBr₃. Thus, 3 electrons are involved in the formation of 1 formula unit of ScBr₃.
In the formation of 1 formula unit of ScBr₃, 3 electrons are transferred.
Learn more: https://brainly.com/question/23331785
Fill in the left side of this equilibrium constant equation for the reaction of benzoic acid with water
Answer:
C6H5CO2H (aq) + H2O (l) _C6H5CO2- + H3OThree test tubes contain aqueous hydrogen sulfide, aqueous sulfur-dioxide and Lugol reagent. By mixing any two of the three test tubes, identify their contents. Explain, stating reasons, how you arrive at your conclusions. Write equations whenever applicable.
Answer:
Initial rate experiments
The simplest initial rate experiments involve measuring the time taken for some recognizable event to happen early in a reaction. This could be the time required for 5 cm3 of gas to be produced, for a small, measurable amount of precipitate to form, or for a dramatic color change to occur. Examples of these three indicators are discussed below.
The concentration of one of the components of the reaction could be changed, holding everything else constant: the concentrations of other reactants, the total volume of the solution and the temperature. The time required for the event to occur is then measured. This process is repeated for a range of concentrations of the substance of interest. A reasonably wide range of concentrations must be measured.This process could be repeated by altering a different property.
Explanation:
I don't think so if this is the answer. if not ok sorry
An element with 5 valence electrons would be a
0 - 3 anion
O +5 anion
0-5 cation
O + 3 cation
Answer:
ask you subject teacher
Explanation:
Pleeeeasee someone who’s good at chemistry?! 10 grade
ASAP
I’ll give points, just help please
Calcium has an electronegativity value of 1.0.
Oxygen has an electronegativity value of 3.5.
What type of bond will form between the two atoms?
Answer:
ionic bond
Explanation:
Calcium gives its two valence electrons to oxygen and forms an ionic bond with oxygen. An ionic bond formed when one atom transfers one or more electrons from itself to its neighboring atom, and an ionic bond formed between the two atoms of the compound.
Which of the following describes how air resistance affects the motion of a falling object?
Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Air resistance may change the direction of a falling object but does not affect its speed.
Air resistance may change the direction of a falling object but does not affect its speed.
Air resistance works with gravity to pull a falling object towards the Earth.
Air resistance works with gravity to pull a falling object towards the Earth.
Air resistance opposes the force of gravity and causes an object to reach terminal velocity.
Air resistance opposes the force of gravity and causes an object to reach terminal velocity.
Air resistance opposes the gravity in a falling object hence the object loses speed once it reaches terminal velocity.
According to the experiment of Galileo, in the absence of air resistance, all objects that are thrown down from the same height will hit the ground at he same time due to the effect of gravity.
We know that the air resistance makes the acceleration of object to become less than the acceleration due to gravity. So, air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Learn more: https://brainly.com/question/865531
Answer:
The answer is D - Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Ill explain why -, for example ,
When the paper is smooth, it exposes a large surface to the air beneath it which slows its descent. Once it is crumpled, the surface which comes in contact with the air is much smaller, allowing it to fall much faster. At first, you probably thought the book would touch the ground first since it is heavier However, once the piece of paper was crumpled, they hit the ground at the same time! Funny, since it is the same piece of paper and the book is still heavier. It all comes down to form. I hope this helped u with the test !!
A car is traveling 70km in 45 minutes. How many miles an hour is the car traveling?
52
Explanation:
70x45÷60= 52
I hope this is helpful
Select all of the true statements about hydrocarbon structure.
a. Every hydrocarbon molecule is exactly the same as every other one.
b. The ability of carbon atoms to bond strongly to each other allows them to stably form ringed structures.
c. Hydrocarbons contain only single bonds that easily break down into smaller compounds.
d. Hydrocarbons are organic chemical compounds that consist of carbon and hydrogen.
Answer:
C
Explanation:
Organic compounds are the compounds which are made only from carbon and hydrogen. The correct option is option D that is hydrocarbons are organic chemical compounds that consist of carbon and hydrogen.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
There are two types of compound covalent compound and ionic in chemistry, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Hydrocarbons are organic compound. Hydrocarbon can have linear chain structure, ring structure or branched structure.
Therefore, hydrocarbons are organic chemical compounds that consist of carbon and hydrogen. The correct option is option D.
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ5
Which of the following is NOT a type of evidence indicating that a chemical change has occurred? *
- fizzing/bubbling
- heat is released
- solubility
- sound is given off
Answer:
sound is given off
Explanation:
due to a number of scientific research sound that is given off of an object is not due to a chemical reaction.
Is brass a solution:
Answer:
Brass is an alloy, and either a "solid solution".
Alloys in general may be solid solutions or they simply be mixtures
Explanation:
Hope it Helps you!!Which statement best describes the effect of radioactive decay on a nucleus?
When radioactive decay occurs, the original nucleus splits into daughter nuclei and the resulting nucleus is more stable than the original nucleus. The nucleus can be of a different element than the original.
Unstable nuclei often undergo radioactive decay. In a radioactive decay, the unstable nucleus is broken up into other nuclei. Usually, the nuclei formed during radioactive decay are smaller in mass compared to the original nucleus.
Also, the resulting nucleus is more stable than the original nucleus. The nucleus can be of a different element than the original.
The effect is that the nucleus changes into the nucleus of one or more other elements. These daughter nuclei have a lower mass and are more stable (lower in energy) than the parent nucleus.
What is the mass of 8 moles of sodium chloride?
468 g
4.68 9
46.8 g
4.689 mol
Please answer
I'll mark BRAINLIST
Answer:
468 g _______________________
The mass of 8 moles of sodium chloride is 468 grams. Therefore, option A is correct.
Molar mass, also known as molecular weight, is the mass of one mole of a substance. It is typically expressed in grams per mole (g/mol). Molar mass is calculated by summing the atomic masses of all the atoms in a molecule.
To calculate the mass of a substance, multiply the number of moles by the molar mass of the substance. The molar mass of sodium chloride (NaCl) is approximately 58.44 grams per mole.
The mass of 8 moles of sodium chloride:
Mass = Number of moles × Molar mass
Mass = 8 moles × 58.44 g/mol
Mass = 467.52 grams
To learn more about the moles, follow the link:
https://brainly.com/question/20552052
#SPJ6
