What is the net force on a remote controlled airplane if a force of 57.6N is applied West and a force of 95.7N is applied South?

Answer:

The field is parallel to the direction of flow of the current.

Answer:

the tension of the rope is 34.95 N

Explanation:

Given;

length of the rope, L = 3 m

mass of the rope, m = 0.105 kg

frequency of the wave, f = 40 Hz

wavelength of the wave, λ = 0.79 m

Let the tension of the rope = T

The speed of the wave is given as;

[tex]v = f\lambda = \sqrt{\frac{T}{\mu} } \\\\where;\\\\\mu \ is \ mass \ per \ unit \ length\\\\\mu = \frac{0.105}{3} = 0.035 \ kg/m\\\\v = f\lambda = 40 \times 0.79 = 31.6 \ m/s\\\\v = \sqrt{\frac{T}{\mu} } \\\\v^2 = \frac{T}{\mu} \\\\T = v^2 \mu\\\\T = (31.6^2)(0.035)\\\\T = 34.95 \ N[/tex]

Therefore, the tension of the rope is 34.95 N

Answer:

Explanation:

En la historia de la ciencia se han dado auténticas barbaridades. Pruebas con animales que hoy no perdonaría nadie, o investigaciones de conducta con personas como la de la cárcel de Stanford, que se han saldado como una especie de pasado incómodo sobre los límites de la experimentación. Sin embargo, pocos se pueden acercar por su carácter perturbador al denominado experimento de Little Albert o Pequeño Albert: El salvaje intento por probar con un bebé que las fobias pueden ser condicionadas y aprendidas. Y lo que es peor, conseguirlo.

Esta idea surgió de la mente de John Broadus Watson, reconocido padre de la rama conductista de la psicología, que desde 1913 había comenzado a probar en animales sus tesis. Estas bebían directamente del los estudios de Iván Pavlov, fisiólogo ruso que ganó el Nobel en 1904 por sus estudios sobre el sistema digestivo, pero que también sentó precedentes sobre la psicología.

link por si te interesa:

https://hipertextual.com/2017/10/pequeno-albert

Answer:

PE = 3.92x10^16J

potential energy

Explanation:

PE = m*g*h

mass of water = 1000kg/m³

(4*10^10m³)*1000kg = 4*10^13kg

PE = (4*10^13kg)*(9.81m/s²)*(100m)

PE = 3.92x10^16J

Answer: hi your question is incomplete  attached below is the complete question

answer :

magnitude of acceleration :  | a | = g = 9.81 m/s^2

direction : a = - g j

Explanation:

Neglecting Air resistance

magnitude of acceleration :

| a | = g = 9.81 m/s^2

Direction of acceleration

a = - g j  ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )

Answer:

Explanation:

This is a recoil problem, which is just another application of the Law of Momentum Conservation. The equation for us is:

[tex][m_av_a+m_ev_e]_b=[m_av_a+m_ev_e]_a[/tex] which, in words, is

The momentum of the astronaut plus the momentum of the piece of equipment before the equipment is thrown has to be equal to the momentum of all that same stuff after the equipment is thrown. Filling in:

[tex][(90.0)(0)+(.50)(0)]_b=[(90.0)(v)+(.50)(-4.0)]_a[/tex]

Obviously, on the left side of the equation, nothing is moving so the whole left side equals 0. Doing the math on the right and paying specific attention to the sig fig's here (notice, I added a 0 after the 4 in the velocity value so our sig fig's are 2 instead of just 1. 1 is useless in most applications).

0 = 90.0v - 2.0 and

2.0 = 90.0v so

v = .022 m/s This is the rate at which he is moving TOWARDS the ship (negative was moving away from the ship, as indicated by the - in the problem). Now we can use the d = rt equation to find out how long this process will take him if he wants to reach his ship before he dies.

12 = .022t and

t = 550 seconds, which is the same thing as 9.2 minutes

Answer:

The correct option is a) 10 mph, 0 mph.

Explanation:

1. The average speed (S) is a magnitude given by:

[tex] S = \frac{D}{T} [/tex]  

Where:

D: is the total distance = 1 mi

T: is the total time = 6 min

[tex] S = \frac{D}{T} = \frac{1 mi}{6 min}*\frac{60 min}{1 h} = 10 mph [/tex]

Hence, the average speed is 10 mph.

2. The average velocity is a vector:

[tex] V = \frac{\Delta d}{\Delta t} = \frac{d_{f} - d_{i}}{t_{f} - t_{i}} [/tex]

Where:

[tex]d_{f}[/tex]: is the final distance                                    

[tex]d_{i}[/tex]: is the initial distance  

[tex]t_{f}[/tex]: is the final time                

[tex]t_{i}[/tex]: is the initial time

Since Juanita ran one mile around her school track, the final position is the same that the initial position, so the magnitude of the average velocity is zero.                                               

Therefore, the correct option is a) 10 mph, 0 mph.

I hope it helps you!          

The question is incomplete, the complete question is;

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.

Answer:

It is incorrect because sodium phosphate is a compound that has a single composition

Explanation:

A compound is a neutral substance made up of two or more atoms which are chemically combined together.

Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.

Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.

Answer:

[tex]T=7.5*10^{-5}[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=2cm[/tex]

Work done [tex]W=1.5×10^-4 joules[/tex]

Generally the equation for Work done is mathematically given by

 [tex]W=T.dA[/tex]

Therefore

 [tex]T=\frac{W}{dr}[/tex]

 [tex]T=\frac{1.5*10^{-4}}{2}[/tex]

 [tex]T=7.5*10^{-5}[/tex]

Answer:

The law of momentum conservation can be stated as follows. For a collision occurring between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.

Answer:

the force of resistance on the right team is 360 N

Explanation:

Given;

force of the left team, = 1000 N

total mass of the right team, m = 300 kg

acceleration of the right team, a = 1.2 m/s²

The force of resistance of the right team is calculated as;

Force = mass x acceleration

Force, F = 300 x 1.2

Force = 360 N

Therefore, the force of resistance on the right team is 360 N

Answer:

Oort cloud

Explanation:

The large reservoir of comet nuclei far beyond Pluto, from which we believe new long-period comets come into the inner solar system, is called Oort cloud.

The comets hich have the large periods that means more than 200 years to orbit the Sun generaly comes from Oort cloud hich is also knon as the cometary cloud.

Answer:

Explanation:

What we are basically looking for here is how long it takes the first stone to hit the water. We have everything we need to figure that out. We will use the equation

Δx = . Filling in, we will solve for t, the time is takes the first stone to hit the water (which is the same for both since they both hit the water at the same time):

which is a quadratic that we will have to factor. Get it into standard form, setting it equal to 0:

and factor to get that

t = 3.2 s and t = -2.8 s

Since time can't ever be negative, it takes 3.2 s for the stones to hit the water.

Answer:

F2 = 900 lbs

Explanation:

From pascal principle;

F1/A1 = F2/A2

Force on cylinder at left; F1 = 100 lbs

Diameter of cylinder at left; d1 = 2 inches

Diameter of cylinder at right; d2 = 6 inches

Formula for area of top of cylinder = πr²

Thus;

Area of top of left cylinder; A = π × 2² = 4π

Area of top of right cylinder; A = π × 6² = 36π

Thus;

100/4π = F2/36π

F2 = (36π × 100)/4π

F2 = 900 lbs

Answer:

750 N

Explanation:

the tension on the rope is the weight of the hero

Answer:

[tex]Q=50.3[/tex]

Explanation:

From the question we are told that:

Frequency [tex]F=330Hz[/tex]

Sound intensity drop [tex]I_d=2[/tex]

Time [tex]T=4s[/tex]

Therefore

Sound intensity Ratio

 [tex]\frac{I}{I_x}=\frac{1}{2}[/tex]

Generally the equation for Sound intensity is mathematically given by

 [tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]

 [tex]\frac{1}{2}=e^{-4\ \=t}[/tex]

 [tex]\=t =5.8s[/tex]

Generally the equation for Quality Factor is mathematically given by

 [tex]Q=2 \pi\frac{E}{\triangle E}[/tex]

 [tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]

 [tex]Q=50.3[/tex]

Answer:

10 pa

Explanation:

4kg* 10 (or 9.8m/s2) = 40

40N /4m2 =10

Answer:

Deflating the tires by pulling the valve stems

Explanation:

When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.

Answer:

25 km/hr

Explanation:

Since Ali's average speed for his trip to school is u = 20 km/hr and his average speed for the return trip to back home from school is v = 30 km/hr, thus his total average speed for the journey is thus V = (initial average speed + final average speed)/2 = (u + v)/2

Substituting the values of the variables into the equation, we have

V = (u + v)/2

V = (20  km/hr + 30 km/hr)/2

V = 50 km/hr/2

V = 25 km/hr

So, the average speed for Ali's trip is 25 km/hr

there u go fella hope u understood

Solution :

When the spacecraft is at halfway point, the distance from the Earth as well as Mars are same. We have to account the masses of the planets. The gravitational force that is exerted by the Earth is greater because of its combined mass with the space probe.

The mass of Earth is greater than the mass of Mars. Therefore, the force of Earth is more than Mars.

Answer:

Explanation:

If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.

Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.

The end of the road is 40m and coming back is also 40 m. The total distance is:

= 40 + 40

= 80m

The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.

Find out more uses of distance-time graphs at https://brainly.com/question/13877898.

#SPJ6

Answer:

0.4

Explanation:

A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.

From the lens formula;

1/f = 1/u+ 1/v

- 1/2 = 1/3 - 1/v

1/v = 1/3 + 1/2

v= 6/5

v= 1.2 cm

Magnification = image distance/object distance

Magnification = 1.2cm/3cm

Magnification = 0.4

Answer:

Average speed = 24 km/h

Explanation:

Given the following data;

Uniform speed A = 30 km/h

Uniform speed B = 20 km/h

To find the average speed;

Mathematically, the average speed of an object is given by the formula;

[tex] Average \; speed = \frac {total \; distance}{total \; time} [/tex] ..... equation 1

Total time = TA + TB

[tex] T_{A} = \frac {x}{30} [/tex]

[tex] T_{B} = \frac {x}{20} [/tex]

[tex] Total \; time = \frac {x}{30} + \frac {x}{20} [/tex]

[tex] Total \; time = \frac {5x}{60} [/tex]

Total distance = x + x

Total distance = 2x

Substituting the values into equation 1;

[tex] Average \; speed = \frac {2x}{\frac {5x}{60}} [/tex]

[tex] Average \; speed = \frac {2x*60}{5x} [/tex]

[tex] Average \; speed = \frac {120}{5} [/tex]

Average speed = 24 km/h

Answer:

1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.

2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.

3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.

4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.

5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.

6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.

7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.

8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.

9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.

10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.

11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.

12) Quemar basura - Cambio químico - Reacción de combustión.

Explanation:

A continuación, veremos que representa cada caso:

1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.

2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.

3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.

4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.

5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.

6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.

7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.

8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.

9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.

10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.

11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.

12) Quemar basura - Cambio químico - Reacción de combustión.

Answer:

"the plants had already started growing."

Explanation:

I think this is the answer because the definition of a dependent variable is the variable that is being affected by the change. Since the plants had already started growing BECAUSE of "They ran out of the farmer's compost, so

some of the plants received that compost

when the seeds were planted and other

plants got hardware store compost after

the plants had already started growing."

Sorry if I am wrong, I am just a 4th grader, pls don't hate on me, I am just trying to help :)

Answer:

It's compost

Explanation:

In case you needed the dependent variable, its the amount of plant growth

Answer:

True

Explanation:

True, atoms create electromagnetic fields that form repulsion to keep them from touching.

Answer:

[tex]f = m \frac{v1 - v2}{t} \\ = 120 \times \frac{25 - 5}{2} \\ = 120 \times \frac{20}{2} \\ = 120 \times 10 \\ = 1200N \\ thank \: you[/tex]

[tex]option \: (a) \: is \: correct.[/tex]

Explanation:

Yes, I was wrong. Pressure increases as the area decreases.

As per the Figure A, the truck is so heavy and having a greater mass. So, the area of contact between the tyres and the road increases and decreases it's pressure on the road due to the increase in area.

As per the Figure B, You know the nature of Tomato that it is soft and smooth to touch and also lighter mass when it's compared with the truck. As it having a lighter mass, it can be cut through the sharp knife. The area of contact decreases and pressure increases on the vegetables.

Answer:

Option number B

Explanation:

The pressure is indirectly proportional to the area therefore pressure decreases when the area increases, and pressure increases when the area decreases