what represents the amount of data that travels along a network​

Answer:

The first step of learning about spreadsheets is understanding the terminology you will encounter as you work through this lesson. The glossary below lists terms that are specific to spreadsheet applications. Terminology that we learned when we looked at wordprocessing (such as copy, paste, clipboard, etc.) also apply to spreadsheet applications.

Answer:

D

Explanation:

Explanation:

Growth – Another important objective of business is to achieve growth. The growth should be in terms of increase in profit, revenue, capacity, number of employees and employee prosperity, etc.

Stability – Stability means continuity of business. An enterprise or business should achieve stability in terms of customer satisfaction, creditworthiness, employee satisfaction etc. A stable organization can easily handle changing dynamics of markets.

Answer:

In half duplex mode, the signal is sent in both directions, but one at a time. In full duplex mode, the signal is sent in both directions at the same time. In simplex mode, only one device can transmit the signal. In half duplex mode, both devices can transmit the signal, but one at a time.

Answer:

Computers use Zeroes and ones and this system is called

A. BINARY SYSTEM

hope it helps

have a nice day

Answer:

chosen ciphertext

Explanation:

Chosen ciphertext attack is a scenario in which the attacker has the ability to choose ciphertexts C i and to view their corresponding decryptions – plaintexts P i . It is essentially the same scenario as a chosen plaintext attack but applied to a decryption function, instead of the encryption function.

Cyber attack usually associated with obtaining decryption keys that do not run in fixed time is called the chosen ciphertext attack.

Hence, chosen ciphertext attempts the use of modular exponentiation.

Learn more : https://brainly.com/question/14826269

Answer:

It can identify the sources of polluted water.

Explanation:

Science can be defined as a branch of intellectual and practical study which systematically observe a body of fact in relation to the structure and behavior of non-living and living organisms (animals, plants and humans) in the natural world through experiments.

A scientific method can be defined as a research method that typically involves the use of experimental and mathematical techniques which comprises of a series of steps such as systematic observation, measurement, and analysis to formulate, test and modify a hypothesis.

An example of how science can solve social problems is that it can identify the sources of polluted water through research, conducting an experiment or simulation of the pollution by using a computer software application.

In conclusion, science is a field of knowledge that typically involves the process of applying, creating and managing practical or scientific knowledge to solve problems and improve human life.

Answer:

It can identify the sources of polluted water.

Explanation:

Answer:

c)     PDA System Unit

Explanation:

.... ...

Trust me mark me as brainliest trust me

Answer:

The smallest is PDA System Unit - c

Answer:

Here the answer is given as follows,

Explanation:  

The real-life situation of a deadlock resolution where a role is played by the victim is given as follows:  

Example: An example of such a situation are often a one-way lane where the flow of traffic is merely in a method. Thus, on just one occasion, the flow of traffic can enter one direction only. Each entrance/exit gate is often considered a resource. during this case, if two cars are coming from both the entrances and that they are often considered as two tasks, then one among the cars must copy or we will say hand over its resource in order that the opposite car gets the prospect to first cross the lane or we will say the opposite task gets executed.  

 a)  Victim: The steps which describe how a victim is chosen are given as follows :  

   The task which is terminated so as to interrupt things of deadlock is taken into account because of the victim.

There are often a variety of job pools that will be under a deadlock situation and therefore the victim is usually a low-priority task in order that the performance isn't affected that much and termination of this task doesn't cause any effect on the opposite jobs.

the main positive effect of selecting and terminating a victim is that things of deadlock are resolved and every one of the tasks can execute now.

The negative effect is that the task that's chosen because the victim is terminated and is executed at the previous. This whole process for choosing a victim then terminating it then restarting it again may consume some longer also.

b)  An easy deadlock priority is often set. this suggests that the victim’s task or the task is often terminated so as to interrupt the deadlock and other jobs can finish executing. After this, the task which is terminated are often later restarted and every one of the tasks can then execute without a deadlock.

 c) When employment gets terminated, the knowledge associated with it's stored. Are often This is often done in order that the work can be restarted again and therefore the information in it's not lost. Since the progress of the victim is stopped. Thus, the sole thanks to complete the victim’s task would be to start out it again. But before restarting the task, this must be considered that the victim’s task doesn't cause any deadlock within the system.  

Answer:

The DoubleDecimalTest class is as follows:

using System;

class DoubleDecimalTest {

 static void Main() {

     double doubleNum = 173737388856632566321737373676D;  

    decimal decimalNum = 173737388856632566321737373676M;

   Console.WriteLine(doubleNum);

   Console.WriteLine(decimalNum);  } }

Explanation:

Required

Program to test double and decimal variables in C#

This declares and initializes double variable doubleNum

     double doubleNum = 173737388856632566321737373676D;

This declares and initializes double variable decimalNum (using the same value as doubleNum)

     decimal decimalNum = 173737388856632566321737373676M;

This prints doubleNum

   Console.WriteLine(doubleNum);

This prints decimalNum

   Console.WriteLine(decimalNum);

Unless the decimal variable is commented out or the value is reduced to a reasonable range, the program will not compile without error.

Need a better discription of the question to finalize an answer.

Answer:

The function is as follows:

def addingAllTheWeirdStuff(array1,array2):

   sumOdd = 0

   for i in array2:

       if i % 2 == 1:

           sumOdd+=i

   for i in array1:

       if i < 10:

           sumOdd+=i

   print("Sum:",sumOdd)

   sumEven = 0

   for i in array1:

       if i % 2 == 0:

           sumEven+=i

   for i in array2:

       if i > 10:

           sumEven+=i

   print("Sum:",sumEven)

Explanation:

This declares the function

def addingAllTheWeirdStuff(array1,array2):

This initializes the sum of odd numbers in array 2 to 0

   sumOdd = 0

This iterates through array 2

   for i in array2:

This adds up all odd numbers in it

       if i % 2 == 1:

           sumOdd+=i

This iterates through array 1

   for i in array1:

This adds up all elements less than 10 to sumOdd

       if i < 10:

           sumOdd+=i

This prints the calculated sum

   print("Sum:",sumOdd)

This initializes the sum of even numbers in array 1 to 0

   sumEven = 0

This iterates through array 1

   for i in array1:

This adds up all even numbers in it

       if i % 2 == 0:

           sumEven+=i

This iterates through array 2

   for i in array2:

This adds up all elements greater than 10 to sumEven

       if i > 10:

           sumEven+=i

This prints the calculated sum

   print("Sum:",sumEven)

Answer:

The program is as follows:

prod = 1

isum = 0

for i in range(4):

   num = float(input())

   prod*=num

   isum+=num

avg = isum/4

print('{:.0f}'.format(prod))

print('{:.3f}'.format(avg))  

Explanation:

This initializes the product to 1

prod = 1

..... and sum to 0

isum = 0

The following iteration is repeated 4 times

for i in range(4):

Get input for each number

   num = float(input())

Calculate the product

   prod*=num

Add up the numbers

   isum+=num

This calculates the average

avg = isum/4

Print the products

print('{:.0f}'.format(prod))

Print the average

print('{:.3f}'.format(avg))  

Answer:

The function is as follows:

def number_of_pennies(dollars,pennies=0):

   return dollars*100+pennies

Explanation:

This defines the function

def number_of_pennies(dollars,pennies=0):

This returns the number of pennies

   return dollars*100+pennies

Note that, if the number of pennies is not passed to the function, the function takes it as 0

Answer:

Code is given as:-

#number_of_pennies function with one default argument with pennies as 0 when no pennies parameter is given

def number_of_pennies(dollars,pennies = 0):

  pennies = dollars*100 + pennies #one dollar equals 100 pennies so calculate total pennies with this formula

  return pennies #return total pennies

print(number_of_pennies(int(input()),int(input()))) #both Dollars and pennies

print(number_of_pennies(int(input()))) #Dollars only

Explanation:

Here is the sample code and output.

Answer:

the answer is D. Multi -tester VOM

It is used to measure the resistance on ohms and voltage that flow in the circuit both AC and DC current is D. Multi-tester VOM​.

Ammeter, tool for measuring both direct or alternating electric powered modern, in amperes. An ammeter can degree an extensive variety of modern values due to the fact at excessive values most effective a small part of the modern is directed thru the meter mechanism; a shunt in parallel with the meter consists of the main portion. ammeter.

A multimeter or a multitester additionally referred to as a volt/ohm meter or VOM, is a digital measuring tool that mixes numerous size capabilities in a single unit. A traditional multimeter can also additionally encompass capabilities consisting of the capacity to degree voltage, modern and resistance.

Reda more about the Voltage:

https://brainly.com/question/24858512

#SPJ2

Answer:

See explanation

Explanation:

The code segment is not properly formatted; However, I will give a general explanation and a worked example.

In c++, setprecision are used to control the number of digits that appears after the decimal points of floating point values.

setprecision(0) means; no decimal point at all while setprecision(1) means 1 digit after the decimal point

While fixed is used to print floating point number in fixed notation.

Having said that:

Assume the code segment is as follows:

number = 12.345;

cout<<fixed;

cout<<setprecision(0);

cout<<number <<endl;

The output will be 12 because setprecision(0) implies no decimal at all; So the number will be rounded up immediately after the decimal point

Answer:

You can use thermal paste, active heat sink, liquid pipes, and even a fan. These are just some that I've heard.

Explanation:

All of these are cooling and will stop the Central Processing Unit from overheating.

Hope this helps :)

When rebuilding your computer, the cooling systems which would most efficiently remove heat from the Central processing unit (CPU) are: cooling fan and thermal compounds.

A computer refers to an intelligent electronic device that is designed and developed to receive raw data as an input and then processes these data into an information (output) that is usable by an end user.

Basically, the main part of a computer are broadly divided into the following;

A cooling device can be defined as a device that is designed and developed to efficiently remove or dissipate heat from the inside of a computer. The cooing system used in a computer are grouped into two

(2) main categories and these are:

I. Active cooling device: an example is a cooling fan.

II. Passive cooling device: an example is a heat sink.

In conclusion, the cooling systems which would most efficiently remove heat from the Central processing unit (CPU) are cooling fan and thermal compounds.

Read more: https://brainly.com/question/10983152

Answer:

Each node on the network has an addres which is called the ip address of which data is sent as IP packets. when the client sends its TCP connection request, the network layer puts the request in a number of packets and transmits each of them to the server.

Answer:

function reverseArray(arr) {

   if (arr.length > 1) {

      arr = [arr[arr.length-1], ...reverseArray(arr.slice(1, -1)), arr[0]]

   }

   return arr;

}

function reverseSentence(sentence) {

   let words = reverseArray( sentence.split(" ") );

   return words.join(" ");

}

console.log( reverseSentence("The quick brown fox jumps over the lazy dog's back") );

console.log( reverseSentence("one two three") );

console.log( reverseSentence("one two") );

console.log( reverseSentence("Single") );

Explanation:

This is a solution in javascript leveraging several powerful constructs in that language, such as the spread operator.

Answer:

error

Explanation:

Answer:

The program in python is as follows:

a = int(input("A: "))

b = int(input("B: "))

if a != 0:

   a= 1

if b != 0:

   b = 1

print("A AND B",end =" ")

if a == b == 1:

   print("True")

else:

   print("False")

print("A NAND B",end =" ")

if a == 0 or b == 0:

   print("True")

else:

   print("False")

print("A OR B",end =" ")

if a == 1 or b == 1:

   print("True")

else:

   print("False")

print("A NOR B",end =" ")

if a == 1 or b == 1:

   print("False")

else:

   print("True")

print("A XOR B",end =" ")

if a != b:

   print("True")

else:

   print("False")

print("A XNOR b",end =" ")

if a == b:

   print("True")

else:

   print("False")

print("NOT A",end =" ")

if a == 1:

   print("False")

else:

   print("True")

print("NOT B",end =" ")

if b == 1:

   print("False")

else:

   print("True")

Explanation:

These get inputs for A and B

a = int(input("A: "))

b = int(input("B: "))

a and b are set to 1 for all inputs other than 0

if a != 0:

   a= 1

if b != 0:

   b = 1

This prints the AND header

print("A AND B",end =" ")

AND is true if only A and B are 1

if a == b == 1:

   print("True")

else:

   print("False")

This prints the NAND header

print("A NAND B",end =" ")

NAND is true if one of A or B is 0

if a == 0 or b == 0:

   print("True")

else:

   print("False")

This prints the OR header

print("A OR B",end =" ")

OR is true if one of A or B is 1

if a == 1 or b == 1:

   print("True")

else:

   print("False")

This prints the NOR header

print("A NOR B",end =" ")

NOR is false if one of A or B is 1

if a == 1 or b == 1:

   print("False")

else:

   print("True")

This prints the XOR header

print("A XOR B",end =" ")

XOR is true if A and B are not equal

if a != b:

   print("True")

else:

   print("False")

This prints the XNOR header

print("A XNOR b",end =" ")

XNOR is true if a equals b

if a == b:

   print("True")

else:

   print("False")

This prints NOT header for A

print("NOT A",end =" ")

This prints the opposite of the input

if a == 1:

   print("False")

else:

   print("True")

This prints NOT header for B

print("NOT B",end =" ")

This prints the opposite of the input

if b == 1:

   print("False")

else:

   print("True")

Answer:

Hi , so your answer is that a good web page design is to make it easy to use and meaningful and able to help people .

Explanation:

Really hope i helped , have a nice day :)

Answer: helpful for everyone

Explanation:

some student need help  so then he can't find the answer in the other websites so it is department about communication

Answer:

nslookup

Explanation:

Nslookup command is considered as one of the most popular command-line software for a Domain Name System probing. It is a network administration command-line tool that is available for the operating systems of many computer. It is mainly used for troubleshooting the DNS problems.

Thus, in the context, the technician receives the error "Web page cannot be displayed" when he alternates to access different web page, the nslookup command is the best command tool to find the root cause of the connection problem.

Answer: Load Balancer

Hypervisor

Router

Explanation:

The systems that they may be applying the patches to include load balancer, hypervisor and router.

The load balancer will help in the distribution of a set of tasks over the resources, in order to boost efficiency with regards to processing.

A hypervisor is used for the creation and the running of virtual machines. The router helps in the connection of the computers and the other devices to the Internet.

The correct answer to this open question is the following.

Memorandum.

To: IT class.

From: Professor Smith.

Date:

Dear students,

The purpose of this memorandum is to let you all know the requirements of an ideal computer room.

1.- The compute room should be a decent, large, space, ready to accommodate the number of students that are going to participate in class.

2.- The proper temperature levels. All the hardware can't stand too much heat. We need ventilators and the right temperature for safety purposes.

3.- The organization of the PCs on every desk must be precise in order to have enough room for everybody's participation and interaction.

4.- Have a proper fire suppression system in place. The risk of fire when working with electronics is considerable.

5.- Access control. The equipment is expensive and must be just for qualified students. Have the proper control-access system to keep the place safe.

Thank you for your attention.

With your cooperation, the computer room should be a place to learn and have fun learning new things.

Answer:

Confidentiality

Explanation:

Cyber security can be defined as a preventive practice of protecting computers, software programs, electronic devices, networks, servers and data from potential theft, attack, damage, or unauthorized access by using a body of technology, frameworks, processes and network engineers.

In Cybersecurity, there are certain security standards, frameworks, antivirus utility, and best practices that must be adopted to ensure there's a formidable wall to prevent data corruption by malwares or viruses, protect data and any unauthorized access or usage of the system network.

In this scenario, a hacker gains access to a web server and reads the credit card numbers stored on that server. Thus, the security principle which is violated is confidentiality.

Confidentiality refers to the act of sharing an information that is expected to be kept secret, especially between the parties involved. Thus, a confidential information is a secret information that mustn't be shared with the general public.

This ultimately implies that, confidentiality requires that access to collected data be limited only to authorized staffs or persons.

Answer:

SELECT TripName

FROM AllTrips

WHERE Trip NOT LIKE ‘NH%'

Explanation:

Required

Fill in the blanks

The table name is not stated; so, I assumed the table name to be AllTrips.

The explanation is as follows:

This select the records in the TripName column

SELECT TripName

This specifies the table where the record is being selected

FROM AllTrips

This states the fetch condition

WHERE Trip NOT LIKE ‘NH%'

Note that:

So, the clause NOT LIKE 'NH%' will return records that do not begin with NH

Answer:

The illustration in Java is as follows:

import java.util.*;

import java.lang.Math.*;

class Main{

public static void main (String[] args){

 Scanner input = new Scanner(System.in);

 double num, root, temp;

 num = input.nextDouble();

 temp = num;

 while (true){

  root = 0.5 * ( (num / temp)+temp);

  if (Math.abs(root - temp) < 0.00001){

   break;   }

  temp = root;  }

 System.out.println("Root: "+root);

}}

Explanation:

This declares all necessary variables

 double num, root, temp;

This gets input for num (i.e the number whose square root is to be calculated)

 num = input.nextDouble();

This saves the input number to temp

 temp = num;

This loop is repeated until it is exited from within the loop

 while (true){

Calculate temporary square root

  root = 0.5 * ( (num / temp)+temp);

The loop is exited, if the absolute difference between the root and temp is less than 0.00001

  if (Math.abs(root - temp) < 0.00001){

   break;   }

Save the calculated root to temp

  temp = root;  }

This prints the calculated root

 System.out.println("Root: "+root);

Answer:

The method is as follows:

public static void checkIntersection(double x1, double y1, double r1, double x2, double y2, double r2){

    double d = Math.sqrt(Math.pow((x1 - x2),2) + Math.pow((y1 - y2),2));

    if(d == r1 + r2){

        System.out.print("The circles touch each other");     }

    else if(d > r1 + r2){

        System.out.print("The circles do not touch each other");     }

    else{

        System.out.print("The circles intersect");     }

}

Explanation:

This defines the method

public static void checkIntersection(double x1, double y1, double r1, double x2, double y2, double r2){

This calculate the distance

    double d = Math.sqrt(Math.pow((x1 - x2),2) + Math.pow((y1 - y2),2));

If the distance equals the sum of both radii, then the circles touch one another

    if(d == r1 + r2){

        System.out.print("The circles touch each other");     }

If the distance is greater than the sum of both radii, then the circles do not touch one another

   else if(d > r1 + r2){

        System.out.print("The circles do not touch each other");     }

If the distance is less than the sum of both radii, then the circles intersect

   else{

        System.out.print("The circles intersect");     }

}