What volume is occupied by 2.719 x 1013 moles of methane gas, CH4?

Answer:

dating and correlating the strata in which it is found

Explanation:

Answer:

The correct answer is A:The age of an unfamiliar layer of rock

Explanation:

I promise that I got it correct on A P E X <3

Answer:

Na2O (the 2 is small the o is not a 0 but and OOh)

Explanation:

Hey there, The formula for the compound formed between sodium and oxygen will be Na2O

Though since sodium is a metal and oxygen is a nonmetal, Na2O is expected to be ionic.

An ionic compound is a chemical compound made up of ions held together by electrostatic forces known as ionic bonding.

To determine an ionic compound's formula, first identify the cation and record its symbol and charge.

After that, identify the anion and record its symbol and charge. Finally, mix the two ions together to make an electrically neutral compound.

After two or more atoms lose or gain electrons to form an ion, an ionic bond can form.

Ionic bonds form when metals lose electrons and nonmetals gain electrons. Ions with opposite charges attract each other, forming an ionic bond.

The symbol for sodium is Na+, and the symbol for oxygen is O2. The resulting compound here in the given condition is Na2O.

Thus, this is the formula for the ionic compound formed between sodium and oxygen.

For more details regarding ionic compounds, visit:

https://brainly.com/question/9167977

#SPJ2

Answer: The empirical formula is [tex]C_3H_3O_2[/tex].

Explanation:

The chemical equation for the combustion of hydrocarbon having carbon, hydrogen and oxygen follows:

[tex]C_xH_yO_z+O_2\rightarrow CO_2+H_2O[/tex]

where, 'x', 'y' and 'z' are the subscripts of Carbon, hydrogen and oxygen respectively.

We are given:

Mass of [tex]CO_2[/tex] = 0.8635

Mass of [tex]H_2O[/tex]= 0.1767 g

Molar mass of carbon dioxide = 44 g/mol

Molar mass of water = 18 g/mol

For calculating the mass of carbon:

In 44g of carbon dioxide, 12 g of carbon is contained.

So, in 0.8635 g of carbon dioxide, =[tex]\frac{12}{44}\times 0.8635=0.2355g[/tex] of carbon will be contained.

For calculating the mass of hydrogen:

In 18g of water, 2 g of hydrogen is contained.

So, in 0.1767 g of water, =[tex]\frac{2}{18}\times 0.1767=0.0196g[/tex] of hydrogen will be contained.

Mass of oxygen in the compound = (0.4647) - (0.2355+0.0196) = 0.2096 g

Mass of C = 0.2355 g

Mass of H = 0.0196 g

Step 1 : convert given masses into moles.

Moles of C =[tex] \frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{0.2355g}{12g/mole}=0.0196moles[/tex]

Moles of H=[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{0.0196g}{1g/mole}=0.0196moles[/tex]

Moles of O=[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{0.2096g}{16g/mole}=0.0131moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C =[tex]\frac{0.0196}{0.0131}=1.5[/tex]

For H =[tex]\frac{0.0196}{0.0131}=1.5[/tex]

For O = [tex]\frac{0.0131}{0.0131}=1[/tex]

The ratio of C : H: O = 1.5 : 1 .5 : 1

Converting to simple whole number ratio:

The ratio of C : H: O = 3 : 3: 2

Hence the empirical formula is [tex]C_3H_3O_2[/tex].

Answer: C- one should have high electron affinity and the other low ionization energy.

Explanation:

Ionization energy is the energy required to remove the electron from an isolated gaseous atom.

Electron affinity is the tendency of an isolated atom to attrcat the electrons towards itsellf.

An ionic bond is formed when an element completely transfers its valence electron to another element. The element which donates the electron is known as electropositive element or the metal and it can donate electron easily if it has low ionization energy.

The element which accepts the electrons is known as electronegative element or non metal and it can easily accept the electron if it has high electron affinity.

Explanation:

A physical change is a change that alters the physical properties of matter particularly the form and state.

In many cases the change is easily reversible. Examples are changes of state such as freezing, boiling, melting e.t.c

A chemical change is a change in which a new kind of matter is formed. It is always accompanied by energy changes which can either be evolution or absorption of heat or light or both.

The process is not easily reversible. Examples are combustion, rusting of iron, precipitation, e.t.c

During a chemical reaction, the reactants undergo a chemical change.

Answer:

70 moles is an Alluminium

Answer:

The molecular formula for sulfur hexafluoride is SF6 S F 6 , in which there is 1 sulfur atom and 6 fluorine atoms.

Explanation:

hope this helps

Answer:

a = 2m/s²

Explanation:

Given data:

Mass of sofa = 150 Kg

Force applied = 300 N

Acceleration = ?

Solution:

Formula:

F = ma

F = force

m = mass

a = acceleration

by putting values,

300 N = 150 Kg × a

a =  300 N /150 Kg

a = 300 Kg m/s² / 150 Kg   ( N = Kgm/s²)

a = 2m/s²

Answer:

Mg(NO4)2 is 180.3 g/mol

Explanation:

First find the substance formula.

Magnesium Nitrate.

Magnesium is a +2 charge.

Nitrate is a -1 charge.

So to balance the chemical formula,

We need 1 magnesium atom for every nitrate atom.

2(1) + 1(-2) = 0

So the substance formula is Mg(NO4)2.

Now find the molar mass of Mg(NO4)2.

Mg = 24.3 amu

N = 14.0 amu

O = 16.0 amu

They are three nitrogen and twelve oxygen atoms.

So you do this: 24.3 + 14.0(2) + 16.0(8) = 180.3 g/mol

So the molar is mass is 180.3 g/mol.

The final answer is Mg(NO4)2 is 180.3 g/mol

Hope it helped!

Answer:

13 M

Explanation:

Molar mass of AgCIO4 = 207 g/mol

Number of moles of AgCIO4= 134/207= 0.65 moles

Number of moles= concentration × volume

Concentration = number of moles/volume

Concentration = 0.65 × 1000/50 = 13 M

Answer:

In explanation.

Explanation:

Physical changes are generally changes in states of matter. So, the water going from liquid to gas is a phase change and therefore physical. (It's still water, just in a different form). Im not sure about the second piece of evidence though. Unless you are talking about the Mac and Cheese which in that case is also a physical change as the two ingredients cheese and macaroni stay the same when cooked just become softer and edible.

Answer:

Dehydration synthesis reactions build molecules up and generally require energy, while hydrolysis reactions break molecules down and generally release energy. Carbohydrates, proteins, and nucleic acids are built up and broken down via these types of reactions, although the monomers involved are different in each case.

Explanation:

Explanation:

When Reggie's car turned eastward, his books continued heading northward, causing them to slide off the top of his car and fall.

were is the opshons.

Answer:

E = 7.11 × [tex]10^{-7}[/tex]  Cal

Explanation:

given data

efficiency = 25 %

solution

first we get here E by the power that is express as

p = [tex]\frac{E}{t}[/tex]     ...........1

E = p × t

E = 1 ×  2 × [tex]\frac{1hp}{746w} \times \frac{1hr}{3600 s}[/tex]  

E = 7.447 × [tex]10^{-7}[/tex] J

and

Ein is get by efficiency

Ein = [tex]\frac{Eout}{\eta }[/tex]        ..................2

Ein = [tex]\frac{7.447 \times 10^{-7}}{.25 }[/tex]

Ein = 29.788 × [tex]10^{-7}[/tex]  J

so required energy is

E = 29.788 × [tex]10^{-7}[/tex]  ×  [tex]\frac{1Cal}{4.184J}[/tex]

E = 7.11 × [tex]10^{-7}[/tex]  Cal

Answer:

C₃H₆ is an alkene

C₆H₁₂ is an alkene

C₈H₁₈ is an alkane

C₇H₁₂ is an alkyne

Explanation:

To determine which of the compound is alkane, alkene, or alkyne,we shall use the general formula of alkane, alkene, and alkyne. This is illustrated below:

General formula for alkane => CₙH₂ₙ₊₂

General formula for alkene => CₙH₂ₙ

General formula for alkyne => CₙH₂ₙ₋₂

For C₃H₆:

n = 3

Alkane => CₙH₂ₙ₊₂ => C₃H₂₍₃₎₊₂ => C₃H₈

Alkene => CₙH₂ₙ => C₃H₂₍₃₎ => C₃H₆

Alkyne => CₙH₂ₙ₋₂ => C₃H₂₍₃₎₋₂ => C₃H₄

Thus, C₃H₆ is an alkene

For C₆H₁₂:

n = 6

Alkane => CₙH₂ₙ₊₂ => C₆H₂₍₆₎₊₂ =>C₆H₁₄

Alkene => CₙH₂ₙ => C₆H₂₍₆₎ => C₆H₁₂

Alkyne => CₙH₂ₙ₋₂ => C₆H₂₍₆₎₋₂ => C₆H₁₀

Thus, C₆H₁₂ is an alkene

For C₈H₁₈:

n = 8

Alkane => CₙH₂ₙ₊₂ => C₈H₂₍₈₎₊₂ => C₈H₁₈

Alkene => CₙH₂ₙ => C₈H₂₍₈₎ => C₈H₁₆

Alkyne => CₙH₂ₙ₋₂ => C₈H₂₍₈₎₋₂ => C₈H₁₄

Thus, C₈H₁₈ is an alkane.

For C₇H₁₂:

n = 7

Alkane => CₙH₂ₙ₊₂ => C₇H₂₍₇₎₊₂ => C₇H₁₆

Alkene => CₙH₂ₙ => C₇H₂₍₇₎ => C₇H₁₄

Alkyne => CₙH₂ₙ₋₂ => C₇H₂₍₇₎₋₂ => C₇H₁₂

Thus, C₇H₁₂ is an alkyne.

SUMMARY:

C₃H₆ is an alkene

C₆H₁₂ is an alkene

C₈H₁₈ is an alkane

C₇H₁₂ is an alkyne

Answer:The atoms cool down and become slower and their bonds become close and they move less.

Explanation:I took science

Answer:

Therefore, the specific heat capacity of the iron is 0.567J/g.°C.

Note: The question is incomplete. The complete question is given as follows:

A 59.1 g sample of iron is put into a calorimeter (see sketch attached) that contains 100.0 g of water. The iron sample starts off at 85.0 °C and the temperature of the water starts off at 23.0 °C. When the temperature of the water stops changing it's 27.6 °C. The pressure remains constant at 1 atm.

Calculate the specific heat capacity of iron according to this experiment. Be sure your answer is rounded to the correct number of significant digits

Explanation:

Using the formula of heat, Q = mc∆T  

where Q = heat energy (Joules, J), m = mass of a substance (g)

c = specific heat capacity (J/g∙°C), ∆T = change in temperature (°C)

When the hot iron is placed in the water, the temperature of the iron and water attains equilibrium when the temperature stops changing at 27.6 °C. Since it is assumed that heat exchange occurs only between the iron metal and water; Heat lost by Iron = Heat gained by water

mass of iron  = 59.1 g, c = ?, Tinitial = 85.0 °C, Tfinal = 27.6 °C

∆T = 85.0 °C - 27.6 °C = 57.4 °C

mass of water = 100.0 g, c = 4.184 J/g∙°C, Tinitial = 23.0 °C, Tfinal = 27.6 °C

∆T = 27.6°C - 23.0°C = 4.6 °C

Substituting the values above in the equation; Heat lost by Iron = Heat gained by water

59.1 g * c * 57.4 °C  = 100.0 g * 4.184 J/g.°C * 4.6 °C

c = 0.567 J/g.°C

Therefore, the specific heat capacity of the iron is 0.567 J/g.°C.

Answer:

Establish and Use a Secure Connection

Use SSH Keys Authentication

Secure File Transfer Protocol

Secure Sockets Layer Certificates

Use Private Networks and VPNs

Explanation:

Answer:

2K   +   2H₂O   →   2KOH  + H₂

Explanation:

The reactants are:

    Potassium metal  = K

    Water  = H₂O

 The products are:

  Potassium hydroxide  = KOH

  Hydrogen gas  = H₂  

The reaction equation is given as;  

                Reactants   →   Products

        2K   +   2H₂O   →   2KOH  + H₂

The reaction is a single displacement reaction

Answer:

0.089

Explanation:

2.5/ 14= .178 then 0.178/ 2 again and you get 0.089

The moles of nitrogen in 2.5 grams of the compound is 0.089 moles. Thus option A is correct.

Moles can be calculated as the ratio of mass to molecular mass.

Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]

The mass of Nitrogen = 14 g/mol

The mass of diatomic nitrogen = 2 [tex]\times[/tex] mass of nitrogen

The mass of diatomic nitrogen = 2 [tex]\times[/tex] 14 g/mol

The mass of diatomic nitogen = 28 g/mol

The molecular weight of Nitrogen = 28g/mol

Given, the mass of Nitrogen = 2.5 g

Moles of nitrogen = [tex]\rm \dfrac{2.5}{28}[/tex]

Moles of Nitrogen = 0.089 moles.

The moles of nitrogen in 2.5 grams of the compound is 0.089 moles. Thus option A is correct.

For more information about a mole, refer to the link:

https://brainly.com/question/21898305

Answer:

An object which experiences either a change in the magnitude or the direction of the velocity vector can be said to be accelerating. This explains why an object moving in a circle at constant speed can be said to accelerate - the direction of the velocity changes.

Explanation:

Answer:

An object which experiences either a change in the magnitude.

Explanation:

the direction of the velocity changes.

Hope that helps :)

Have a good day

Answer:

Explanation:

HCl    + NaOH     =    NaCl    +     H₂O.

1 mole   1 mole           1 mole          1 mole

6.93  g of hydrochloric acid = 6.93 / 36.5 = .189 mole of HCl

2.4 g of NaOH = 2.4 / 40 =  .06 mole of NaOH

NaOH is in short supply so it is the limiting reagent .

1  mole of NaOH reacts with 1 mole of HCl to give 1 mole of Water

.06 mole of NaOH will react with .06 mole of HCl to give .06 mole of water

Water formed = .06 mole

= .06 x 18 = 1.08 g

= 1.1 g

Answer:

Storms and hurricanes can be formed with low pressure. It always results into unsettled weather.

Explanation:

Hope this helps!

Answer:c

Explanation: