What was the role of gravity in the formation of the solar system?
A. Gravity caused the solar system to separate into individual
celestial bodies
B. Gravity caused the solar system to move closer to the Sun.
C. Gravity caused the solar system to compress into one larger
mass
D. Gravity caused the solar system to expand from a central point.

Answers

Answer 1

Answer:

Approximately 4.6 billion years ago, the solar system was a cloud of dust and gas known as a solar nebula. Gravity collapsed the material in on itself as it began to spin, forming the sun in the center of the nebula. ... Small particles drew together, bound by the force of gravity, into larger particles.


Related Questions

research paper on tsunamis (4-5 paragraphs minimum) 3) Tsunamis how they work….evacuation routes, structures built in oceans to protect, early detection, etc

Expectations:

A. Must be at least 4 full paragraphs. (probably will need to be more)

B. Must have an introductory paragraph that explains what the problem is, and the general overview of the paper.

C. Must Define Problem, including details and how it relates to Irvine

D. Main Body of Paper (probably couple of paragraphs) This is where you will show what you found out in your research. Make sure to include things like current use/techniques, as well as what technological advancements are being researched to improve your specific topic/issue.

E. Conclusion: Short summary of main points. Your Opinion on what is working and why (or what is not working and why)

F. Citations: Must use at LEAST 3 sources. Must site works at end, in either MLA or APA format, AND must site them where used in the paper (also MLA or APA format).

Make sure all work is yours and original. Copying is cheating. Using information from a source without citing is plagiarism.

Answers

A must be at least 4 full paragraphs probably will need more

I have possess'd your grace of what I purpose:And by our holy Sabbath have I swornTo have the due and forfeit of my bond.If you deny it, let the danger lightUpon your charter and your city's freedom !You'll ask me, why I rather choose to haveA weight of carrion flesh than to receiveThree thousand ducats : I'll not answer that:But, say, it is my humour(1) Whom are these lines addressed to? What is the context in which theselines are spoken?(ii) What has Shylock sworn on oath ?​

Answers

Answer:

1. These lines are addressed to Duke.

2. These lines show that Shylock is not willing to forgive the debt a merchant owes him, nor is he willing to justify why he demands that debt be paid, even if it seems cruel.

3. He swore by the Holy Sabbath, which is a holy day for him, who is a Jew. He swore he would get the debt money or a piece of the debtor's flesh.

Explanation:

The lines shown in the question above refer to "The Merchant of Venice" written by Shakespeare. In this story we are introduced to Antonio, a commercial who is very prejudiced against Jews, but when he needs money, he borrows from another merchant, Shylock, who is Jewish. Shylock agrees to lend money to Antonio, but determines the date that this money must be returned, in addition, Shylock states that he will lend the money if Antonio agrees that if this money is not paid by the specified date, Antonio will have to pay with half a kilo of flesh from his own body. Antonio agrees, but doesn't pay the money so Shylock goes after the flesh of Antonio's body and Duke tries to intervene because he thinks this is too cruel. At this point, Shylock speaks the lines shown in the question above, showing that he is not willing to change his mind.

can u guys help me with this question.

State one example of the cause of a short circuit. Explain your answer​

Answers

Answer:

the positive and negative terminals of a battery are connected with a low resistance conductor.

Raquel establece que la rapidez del sonido en el aire en un día es de 346 m/s . Días después hace la misma medición obteniendo una rapidez de 340 m/ s . ¿Cuál será la temperatura del aire en cada día?

Answers

Answer:

La ecuación para la velodiad del sonido en aire esta dada por:

[tex]v = \sqrt{ \frac{\gamma*R*T}{M} }[/tex]

Resolviendo esto para T, obtenemos:

[tex]T = v^2*(\frac{M}{\gamma*R} )[/tex]

donde:

T = temperatura del aire en grados Kelvin

γ = constante adiabatica = 1.4

R = constante del gas ideal =

M = masa molar del aire = 29*10^(-3) kg/mol

Si sabemos que el primer día la velocidad es 346 m/s, tenemos:

v = 346 m/s

Ahora podemos reemplazar todos esos valores en la ecuación para T, y asi obtener:

[tex]T = (346m/s)^2*(\frac{29*10^{-3}kg/mol}{1.4* 8.31 J/mol*K} ) = 298.42 K[/tex]

Para el segundo día la velocidad es 340 m/s, entonces ese día la temperatura va a ser:

[tex]T = (340m/s)^2*(\frac{29*10^{-3}kg/mol}{1.4* 8.31 J/mol*K} ) = 288.16 K[/tex]

Write a hypothesis about the use of an object’s physical characteristics to determine its density. Use the format "if . . . then . . . because . . .” and be sure to answer the lesson question "How can the density of an object be determined?”

Answers

Answer:

If 2 objects have the same mass, then which object has a larger volume will have a smaller density

Explanation:

Because density is the object's mass divided by volume

If a lawn mower is pushed with a distance of 30 meters and 12N-m of work is exerted, calculate the force.

Answers

Answer:

Explanation:

W = FΔx so filling in:

12 = F(30) so

F = .4N

4. Interference is an example of which aspect of electromagnetic radiation?
A) Particle behavior
B) photon behavior
C) the photoelectric effect
D) wave behavior

Answers

Answer:

D is the answer wave behavior

Interference, refraction, diffraction, and dispersion are all aspects of wave behavior. (D).  That is, particles don't do these things.

Making rough estimates of physical quantities is usefulA. So that you can see if the answer to a problem makes physical sense.B. Because we only use approximate numbers in problems.C. Because the laws we use are not exact, so using exact numbers is not crucial.D.So that you can compute answers doing simpler math.

Answers

Answer:

A. So that you can see if the answer to a problem makes physical sense.

Explanation:

Science can be defined as a branch of intellectual and practical study which systematically observe a body of fact in relation to the structure and behavior of non-living and living organisms (animals, plants and humans) in the natural world through experiments.

An experiment can be defined as an investigation which typically involves the process of manipulating an independent variable (the cause) in order to be able to determine or measure the dependent variable (the effect).

This ultimately implies that, an experiment can be used by scientists to show or demonstrate how a condition causes or gives rise to another i.e cause and effect, influence, behavior, etc in a sample.

Measurements refers to the process which typically involves the process of identifying and determining the dimensions of a physical object. The dimensions include important parameters such as width, height, length, area, volume, circumference etc.

In Science, making rough estimates of physical quantities is useful so that you can see if the answer to a problem makes physical sense.

For example, you could make a rough estimate of a storage tank and deductively determine whether or not it's in tandem with its physical size in reality.

What is physical measurement? in Science​

Answers

Answer:

physical measurement comprises the measurement of objects, things, etc. and is concerned with the measurement of height, weight, length, size, volume etc.

Give a general description of how winds form

Answers

Answer:

Wind comes from pressure and temperature differences.

Explanation:

Have you ever opened a window on a hot day to let a breeze in? What is happening is a rush of air to balance out temperatures. This goal for uniformity is why ice melts in a glass of warm coffee and air rushes out of a balloon.

Answer:

Wind forms when the sun heats one part of the atmosphere differently than another part. This causes expansion of warmer air, making less pressure where it is warm than where it is cooler. Air always moves from high pressure to lower pressure, and this movement of air is wind.

Explanation:

tìm chỉ số của A1 và A2

Answers

Answer:

A1

Explanation:

A 0.080-kg egg test dummy is fitted with a helmet and attached to a swing. This egg test dummy is pulled back and released, allowing it to collide with a cement block. The impulse on the egg test dummy is - 0.39N.s is over an interval of 0.050 s. What is the magnitude of the force on the egg test dummy during this time interval?

Answers

Answer:

7.8 N

Explanation:

Applying,

I = Ft................. Eqaution 1

Where I = Impulse on the egg test dummy, F = Force on the egg test dummy during the time interval, t = time interval

make F the subject of the equation

F = I/t.................. Equation 2

From the question,

Given: T = -0.39 N.s, t = 0.050 s

Substitute these vales into equation 2

F = -0.39/0.050

F = -7.8 N

Hence the force that act on the egg test dummy is 7.8 N

If Cl− is the only anion in the solution, what is the Cl− concentration in milliequivalents per liter?

Answers

Answer:

155mEq/L Cl-

Explanation:

A Ringer’s solution contains the following concentrations of cations: 146 mEq/L of Na+, 5 mEq/L of K+, and 4 mEq/L of Ca2+.

As Cl- is the only counterion of those cations:

For Na, the molecule is NaCl and the mEq/L of Cl- = mEq of Na+. The Cl- of the first ion is 146mEq/L Cl-

For K+, The molecule is KCl, mEq Cl- = 5mEq/L Cl-

And, for Ca2+, The molecule is CaCl2 but the equivalents of Ca2+ = Equivalents of Cl- = 4mEq/L Cl-

The total concentration of Cl- are:

146 + 5 + 4 =

155mEq/L Cl-

In a given chemical reaction the energy of the products is less than the energy of the reactants which statement is true for this chemical reaction

Answers

Group of answer choices.

A. Energy is absorbed in the reaction.

B. Energy is released in the reaction.

C. There is no transfer of energy in the reaction.

D. Energy is lost in the reaction.

Answer:

B. Energy is released in the reaction.

Explanation:

A chemical reaction can be defined as a chemical process which typically involves the transformation or rearrangement of the atomic, ionic or molecular structure of an element through the breakdown and formation of chemical bonds to produce a new compound or substance.

Basically, there are two (2) main types of chemical reaction and these include;

I. Endothermic reaction: it's a chemical reaction in which heat is absorbed

II. Exothermic reaction: it's a chemical reaction in which heat is liberated into the environment.

In Chemistry, all chemical equation must follow or be in accordance with the Law of Conservation of Mass, which states that mass can neither be created nor destroyed by either a physical transformation or a chemical reaction but transformed from one form to another in an isolated (closed) system.

Generally, energy is released in a chemical reaction when the energy of the products is less than the energy of the reactants and it is referred to as an exothermic reaction.

However, when the energy of the products is greater than the energy of the reactants, energy is absorbed and it is referred to as an endothermic reaction.

Longitudinal waves are produced by

Answers

A longitudinal wave can be created in a slinky if the slinky is stretched out in a horizontal direction and the first coils of the slinky are vibrated horizontally. In such a case, each individual coil of the medium is set into vibrational motion in directions parallel to the direction that the energy is transported.

Hope it helped :))

Answer the question based on this waveform.

A wave has a velocity of 24 m/s and a period of 3.0 s.


Choose the correct amplitude.

1/2 m
1/72 m
3 m
Cannot be determined from the given information

Answers

Answer:

Cannot be determined from the given information

Explanation:

Given the following data;

Velocity = 24 m/s

Period = 3 seconds

To find the amplitude of the wave;

Mathematically, the amplitude of a wave is given by the formula;

x = Asin(ωt + ϕ)

Where;

x is displacement of the wave measured in meters.

A is the amplitude.

ω is the angular frequency measured in rad/s.

t is the time period measured in seconds.

ϕ is the phase angle.

Hence, the information provided in this exercise isn't sufficient to find the amplitude of the waveform.

However, the given parameters can be used to calculate the frequency and wavelength of the wave.

If we go on the top of the Mountain we will our weight increase or decrease?​

Answers

Answer:

increase

Explanation:

guesshejwoowsnnsnakalalapqjhdjd

Answer:

our weight would decrease.

Explanation:

because of you burning all those calories and fat from hiking up the mountain.

que aceleración adquiere un cuerpo de 0.5 kg cuando actúa una fuerza n2​

Answers

La aceleración que adquiere el cuerpo de 0.5Kg es:

When a ray enters into air from glass slab
a) its wavelength decreases
b) it's wavelength increases
c) it's frequency increases
d) it's frequency decreases​

Answers

Answer:

a ) Its wavelength decreases

Explanation:

When a ray enters into air from glass slab its wavelength decreases.

Does anyone know the answer ? I forgot my calculator.


12 x sin50

Answers

12 × sin50 = 9.192533317........

health ,population and environment education is for the enrichment of quality of life,justify the statement​

Answers

Answer:

hey !! here is a short and sweet answer to your question

=quality of life is directly determined by health ,education ,and life expectacy

=health Is a type of thing that gives employment to the person working in firm

hope u understand

Explanation:

Consider the stress-strain diagram shown here. Assume all four material samples (A-D) were originally the same size and shape. Identify the material with the highest yield strength:

Stress-strain diagram with 4 materials graphed.


A


B


C


D

Answers

Answer:

B

Explanation:

Stress-strain diagram with 4 materials graphed. The graph with maximum yield strength is B.

What is stress?

Stress is defined as the force applied per unit area of cross-section. It is denoted by Sigma(σ). Its's unit is same as the pressure i.e. N/m².

Considering the stress-strain diagram shown here. Assumed all four material samples denoted as (A-D) were originally the same size and shape.

When a body is stretched by a tensile force, it stretches more and more until it reaches its elastic limit. There comes a point where the body no longer stretches. The change in stress is very less and the stress is greater at the yield point. The strength required up to the yield point is called as the yield strength. The body breaks while forming the neck of the bottle. This strength of any material is known as ultimate stress at break or ultimate tensile strength.

So, the material with the highest yield strength is B.

Thus, the correct option is B.

Learn more about Stress.

https://brainly.com/question/12871096

#SPJ5

The answer is D. I can't figure out why? The human range is from 20 Hz to 20 kHz...

Answers

Answer:

(C) 2 kHz

Explanation:

The normal hearing frequency range of a person has a minimum of about 20 Hz, which is the about the frequency of the lowest pipe organ pipe. The maximum frequency that a human can ear comfortably is 20 kHz

Therefore, the student will not be able to hear sounds less than 20 Hz, and sounds above 20 kHz and the student will only be able to hear the 2 kHz sound.

Impulse can be defined as

The frequency at which something occurs

The change in velocity

The change in momentum from an force within the system

The change in momentum from a force outside of the system

Answers

Explanation:

The change in momentum from an force within the system.

I think its D. The change in momentum from a force outside of the system

Your new motorcycle weighs 2450 N.
What is
its mass in kilograms?


i understand the answer is 250kg because mass times gravity thing but why isn’t the answer negative cause gravity pulls down so wouldn’t be Negative answer not a positive answer

i was taught FW is always negative why isn’t it negative here

Answers

Answer:

Explanation:

The negative only matters reallly if you are dealing with a 2d system. I could even define down as positive and up as negative. However, usually you are taught that down is negative. It really doesn't matter because a force is a force. It is only given a direction relative to another force or vector direction.

What is an essential characteristic of an object in equilibrium?
1) zero velocity
2) zero acceleration
3) zero potential energy
4) zero kinetic energy

Answers

Answer:

2) zero acceleration

Explanation:

Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.

This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.

Mathematically, the motion of an object is described in terms of time, distance, speed, velocity, position, displacement, acceleration, etc.

In physics, acceleration can be defined as the rate of change of the velocity of an object with respect to time.

Generally, an object is said to be in equilibrium when neither the energy possessed by the object not state of motion changes with respect to time. Thus, the vector sum of all the forces acting upon an object that's in equilibrium is zero.

In conclusion, an essential characteristic of an object in equilibrium is zero (0) acceleration because there's no change in its velocity with respect to time.

List out the fundamental and derived units​

Answers

Derived Units Table: The Table Shows the List of Derived Units
Quantity Formula SI Derived Unit
Force Mass x Acceleration
Work Energy Force x Displacement Power/Time Kg. m.s-2
Pressure, Stress Force/Area Kg.m-1.s-2
Current density J = I/A A.m-2

My second question for today :
Why do we ever have a blood moon?? What's the science behind it​

Answers

Answer:

vhijko and eye rudiieidjdjddjjd

Explanation:

jdjdjdjdjfjofkd ruudoeksowkosksd and nkdeondjvndkxnfuvjfk

The acidity model given by pH = -log10[H+] where acidity (pH) is a measure of the hydrogen ion concentration [H+] (measured in moles of hydrogen per liter) of a solution. Using this model, determine the pH of a solution with a hydrogen ion concentration of 2.3 X 10^-5 (round your answer to the nearest hundredth)

Answers

Answer:

Hydrogen ion concentration, [H+] :

[tex]{ \bf{[H {}^{ + } ] = 2.3 \times {10}^{ - 5} \: mol \: l {}^{ - 1} }}[/tex]

Substitute to the negative logarithmic model:

[tex] = { \tt{ - log(2.3 \times {10}^{ - 5} ) }} \\ pH = 4.64[/tex]

Can the magnitude of a vector ever (a) be equal to one of its components, or (b) be less than one of its components? 9. Can a particle with constant speed be accelerating? What if it has constant velocity? ​

Answers

Answer:

a) the other components are zero, in the direction of one of the coordinate axes

b) the magnitude is less than the value of one of its components, it must occur when the vector is in some arbitrary direction

9) constant velocity the acceleration must necessarily be zero,

constant speed  can be accelerated since it may be changing the direction of the velocity vector

Explanation:

Vectors are quantities that have modulo (scalar) direction and sense.

a)  If in a vector its magnitude is equal to one d its components implies that the other components are zero, therefore the vector must be in the direction of one of the coordinate axes

b) if the magnitude is less than the value of one of its components, it must occur when the vector is in some arbitrary direction, other than the direction of the axes, that is

          R² = x² + y²

where R is the magnitude of the vector e x, and are the components

9) When a particle has a constant velocity, the acceleration must necessarily be zero,

         v = vo + a t

The bold letters indicate vectors If a = 0 implies that v = vo

If a particle has constant speed it can be accelerated since it may be changing the direction of the velocity vector, this type of acceleration has the name of centripetal acceleration

Other Questions
There is a U-tube in which solutions in two arms A and B are separated by a membrane. Arm A contains glucose with concentration of 0.4 mol per liter and sodium chloride with concentration of 0.5 mol per liter. Arm B contains glucose with concentration of 0.8 mol per liter and sodium chloride with concentration of 0.4 mol per liter.The solutions in the arms of a U-tube (the figure) are separated at the bottom of the tube by a selectively permeable membrane. The membrane is permeable to sodium chloride but not to glucose. Side A is filled with a solution of 0.4 M glucose and 0.5 M sodium chloride (NaCl), and side B is filled with a solution containing 0.8 M glucose and 0.4 M sodium chloride. Initially, the volume in both arms is the same. If you examine side A in the figure after three days, the concentrations of glucose and NaCl should be _____________. Find the value of x in Circle O. [100 Points]SHOW YOUR WORK, PLEASE! If a translation of (x,y) (x+6,y-10) is applied to figure ABCD, what are the coordinates of D? Chemistry!! Help me! And explain step by step! When i see the vase in that shop window , i knew it was exactly what will be looking for. Which sentence best states the effect the repetition of the word "warrior" hason the audience?A. It underscores the importance of the word for the audience.B. It emphasizes Rosa Parks's previous military experience,aC. It appeals to the audience's humor and makes them laugh.D. It establishes the speaker as a personal friend of Rosa Parks. All verb tenses are formed using the______.A) infinitiveB) moodC) principal partsD) voice What are the purposes of the Democratic leadership style? After leaving an airport, a plane flies for 2 hours on a course of 60 degrees at a speed of 200 kilometers per hour. The plane then flies for 3 hours on a course of 210 degrees at a speed of 100 kilometers per hour What is the distance of the airport from the plane in kilometers? Round to the nearest tenth The question is "find the lowest common multiple of 4 and 6"with step by step explaination The conversion of liquid water into gaseous water is called? Suppose that 22 inches of wire costs 66 cents.At the same rate, how much (in cents) will 17 inches of wire cost?cents? Cu 2. Cho hnh thang cn ABCD (AB // CD, AB CD). Gi O l giao im ca AD v BC, E l giao im ca AC v BD. Chng minh rng: | a) Tam gic AOB cn O.b) Cc tam gic ABD v BAC bng nhau. C) EC = EDd) OE l trung trc ca AB v CD. Its your first day on the job teaching a group of second graders. Choose 6 verbs from the list to create either affirmative or negative USTEDES FORMAL COMMANDS that you could use to manage the students in the classroom. Complete sentences. Verbs: hablar, abrir, sentarse, hacer, escuchar, comer, leer, pedir, mirar, escribir, gritar, pensar Solve the following, where 0 < < 360.If cos =2/3 and tan How many children were killed in the Holocaust? how do I answer question 'literacy is prerequisites of development"justify the statement with examples Give examples if operational conflicts that could occur in a cross- cultural context because of different attitudes towards:1) time, 2) individualism. Give a country or region that would be different from the US for each of the two variables.