What's the mass in grams of 0.442 moles of calcium bromide, CaBr2? The atomic
weight of Ca is 40.1 and the atomic weight of Br is 79.9.
A) 452.3 g
B) 53.04 g
C) 44.2 g
D) 88.4 g

Answer:

[tex]Ksp=1.07x10^{-8}[/tex]

Explanation:

Hello,

In this case, the dissociation reaction is:

[tex]PbI_2(s)\rightleftharpoons Pb^{2+}(aq)+2I^-(aq)[/tex]

For which the equilibrium expression is:

[tex]Ksp=[Pb^{2+}][I^-]^2[/tex]

Thus, since the saturated solution is 0.064g/100 mL at 20 °C we need to compute the molar solubility by using its molar mass (461.2 g/mol)

[tex]Molar solubility=\frac{0.064g}{100mL}*\frac{1000mL}{1L}*\frac{1mol}{461.2g}=1.39x10^{-3}M[/tex]

In such a way, since the mole ratio between lead (II) iodide to lead (II) and iodide ions is 1:1 and 1:2 respectively, the concentration of each ion turns out:

[tex][Pb^{2+}]=1.39x10^{-3}M[/tex]

[tex][I^-]=1.39x10^{-3}M*2=2.78x10^{-3}M[/tex]

Thereby, the solubility product results:

[tex]Ksp=(1.39x10^{-3}M)(2.78x10^{-3}M)^2\\\\Ksp=1.07x10^{-8}[/tex]

Regards.

Solubility product constant for the product of lead(II) iodide is [tex]\bold { 1.07x 10^-^8}[/tex].

The dissociation reaction for lead (II) iodide

[tex]\bold {Pb I^2 (s) \leftrightharpoons Pb^2^+ + 2I^- }[/tex]

Solubility product constant at equilibrium.

[tex]\bold {Ksp = [Pb^2^++[I^-]^2}[/tex]

The molar solubility of the substance can be calculated by using the molar mass,

[tex]\bold {s = \dfrac {0.064}{100 mL} \times 461.2 g/mol = 1.39x10^-^3}[/tex]

Molar ratio between between PbI to lead and iodide ions is 1:1 and 1:2 respectively.

Thus Ksp will be,

[tex]\bold {Ksp =(1.39x10^-^3)(2.78x10^-^3 )^2}\\\\\bold {Ksp = 1.07x 10^-^8}[/tex]

Therefore, solubility product constant for the product of lead(II) iodide is [tex]\bold { 1.07x 10^-^8}[/tex].

To know more about  solubility product constant,

https://brainly.com/question/1419865

Explanation:

free your mind drink water and go outside take fresh air you will get answers

Answer:

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

Explanation:

A galvanic cell is composed of two electrodes immersed in a suitable electrolyte and connected via a salt bridge. One of the electrodes serves as a cathode where reduction or gain of electrons takes place. The other half cell functions as an anode where oxidation or loss of electrons occurs.

The representation is given by writing the anode on left hand side followed by its ion with its molar concentration. It is followed by a salt bridge. Then the cathodic ion with its molar concentration is written and then the cathode.

As it is given that cadmium acts as anode, it must be on the left hand side and copper must be on right hand side.

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

Explanation:

Potassium hydroxide = KOH

Chromium(iii)bromide = CrBr3

Yes! A reaction occurs. This is given by the balanced equation;

3 KOH + CrBr3 → 3 KBr + Cr(OH)3

Answer:

C. Gas

Explanation:

delete please .....................................

Answer:

The correct answer is 0.186 V

Explanation:

The two hemirreactions are:

Reduction: Fe²⁺ + 2 e- → Fe(s)  

Oxidation : Co(s)  → Co²⁺ + 2 e-

Thus, we calculate the standard cell potential (Eº) from the difference between the reduction potentials of cobalt and iron, respectively,  as follows:

Eº = Eº(Fe²⁺/Fe(s)) - Eº(Co²⁺/Co(s)) = -0.28 V - (-0.447 V) = 0.167 V

Then, we use the Nernst equation to calculate the cell potential (E) at 298.15 K:

E= Eº - (0.0592 V/n) x log Q

Where:

n: number of electrons that are transferred in the reaction. In this case, n= 2.

Q: ratio between the concentrations of products over reactants, calculated as follows:

[tex]Q = \frac{ [Co^{2+} ]}{[Fe^{2+} ]} = \frac{0.33 M}{1.47 M} = 0.2244[/tex]

Finally, we introduce Eº= 0.167 V, n= 2, Q=0.2244, to obtain E:

E= 0.167 V - (0.0592 V/2) x log (0.2244) = 0.186 V

Answer:

The correct answer is -341.2 kJ per mole.

Explanation:

The reaction given is:  

CO (g) + Cl₂ (g) ⇔ COCl₂ (g)

Kp = 5.62 × 10³⁵

T = 25 °C or 298 K

The formula for calculating ΔG is,  

ΔG° = -RTlnKp

ΔG° = -8.314 × 298 ln (5.62 × 10^35)

ΔG° = -203.9 kJ/mol

ΔG° = ∑nΔG°f (products) -∑nΔG°f (reactants)

ΔG° = ΔG°f (COCl₂ (g)) - [ΔG°f (CO(g)) + ΔG°f (Cl₂(g))]

ΔG°f (COCl₂ (g)) = ΔG° + [ΔG°f (CO (g)) + ΔG°f (Cl₂(g))]

ΔG°f (COCl₂ (g)) = -203.9 + (-137.28 + 0.00)

ΔG°f (COCl₂ (g)) = -341.2 kJ/mol

The standard Gibbs free energy [tex]\mathbf{\Delta G^o_f}[/tex] for COCl2 at 25°C is -341.25 kJ/mol

The given equation for the chemical reaction is

CO(g) + Cl2(g) ⇌ COCl2(g)

At the temperature of 25°C = (273 + 25) K, the equilibrium constant [tex]\mathbf{K_p = 5.62\times 10^{35}}[/tex]

Consider the expression for the relationship between [tex]\mathbf{\Delta G^o}[/tex] and [tex]\mathbf{K_p }[/tex] for the equilibrium reaction can be expressed as:

[tex]\mathbf{\Delta G^o = - RT In K_p}[/tex]

where;

∴

[tex]\mathbf{\Delta G^o = - (8.314 \times 10^{-3}\ kJ/K.mol \times 298 \ K) \times In (5.62 \times 10^{35} )}[/tex]

[tex]\mathbf{\Delta G^o = -2.477572\ K \times 82.31680992}[/tex]

[tex]\mathbf{\Delta G^o = 203.95 \ kJ}[/tex]

Thus, the standard free energy for the reaction is 203.95 kJ/mol

For a given reaction, the standard Gibbs free energy can be calculated by using the formula:

[tex]\mathbf{\Delta G^o_{rxn} = \sum n \Delta G^o_f (products) - \sum m \Delta G^o_f (reactants) }[/tex]

[tex]\mathbf{\Delta G^o_{rxn} =\Big [\Delta G^o_{f} (COCl_{2(g)} ) -\Big(\Delta G^o_{f} (CO)_{(g)} + \Delta G^o_{f} (Cl)_{2(g)} ) \Big ) \Big ] }[/tex]

replacing the values of and solving for COCl2 at standard free energy of formation of substances, we have:

[tex]\mathbf{-203.95 \ kJ/mol =\Big [\Delta G^o_{f} (COCl_{2(g)} ) -\Big(-137.3 kJ/mol + 0 \ kJ/mol\Big ) \Big ] }[/tex]

Collecting like terms, we have:

[tex]\mathbf{\Delta G^o_{f} (COCl_{2(g)} ) = -203.95 \ kJ/mol -137.3 kJ/mol }[/tex]

[tex]\mathbf{\Delta G^o_{f} (COCl_{2(g)} ) = -341.25 \ kJ/mol }[/tex]

Therefore, we can conclude that the standard Gibbs free energy [tex]\mathbf{\Delta G^o_f}[/tex] for COCl2 at 25°C is -341.25 kJ/mol

Learn more about standard Gibbs free energy here:

https://brainly.com/question/13318988?referrer=searchResults

sorry not sure wish I can help u

Answer:

2 Na(s) + C(s) + 3/2 O₂(g) → Na₂CO₃(s)

Explanation:

The molar enthalpy of formation of a chemical is defined as the change in enthalpy during the formation of 1 mole of the substance from its constituent elements (Constituent elements are pure elements you have in the periodic table)

For Na₂CO₃ constituent elements are Na(s), C(s) and O₂(g) and the chemical equation that represents the molar enthalpy is:

Answer: it is A

Explanation: I am sure

Answer:

0.191 M

Explanation:

i took the test.

Answer:

Fe(s) + Cu^2+(aq) ---> Fe^2+(aq) + Cu(s)

Explanation:

The ionic equation shows the actual reaction that took place. It excludes the spectator ions. Spectator ions are ions that do not really participate in the reaction even though they are present in the system.

For the reaction between iron and copper II nitrate, the molecular reaction equation is;

Fe(s) + Cu(NO3)2(aq)----> Fe(NO3)2(aq) +Cu(s)

Ionically;

Fe(s) + Cu^2+(aq) ---> Fe^2+(aq) + Cu(s)

Answer:

hbchbjH j jas a aa  a s ds d as das

Explanation:

Answer:

Kb = [CH₃NH₃⁺] × [OH⁻] / [CH₃NH₂]

Explanation:

According to Brönsted-Lowry acid-base theory:

When methylamine reacts with water, it behaves as a Brönsted-Lowry base, according to the following reaction.

CH₃NH₂(aq) + H₂O(l) ⇄ CH₃NH₃⁺(aq) + OH⁻(aq)

The basic equilibrium constant (Kb) is:

Kb = [CH₃NH₃⁺] × [OH⁻] / [CH₃NH₂]

Answer:

7.4 × 10⁻⁹ M

Explanation:

Step 1: Given data

Solubility product constant (Ksp) for Li₃PO₄: 5.9 × 10⁻¹⁷

Concentration of lithium ion: 0.0020 M

Step 2: Write the reaction for the solution of Li₃PO₄

Li₃PO₄(s) ⇄ 3 Li⁺(aq) + PO₄³⁻(aq)

Step 3: Calculate the phosphate concentration required for a precipitate to occur

The solubility product constant is:

Ksp = 5.9 × 10⁻¹⁷ = [Li⁺]³ × [PO₄³⁻]

[PO₄³⁻] = 5.9 × 10⁻¹⁷ / [Li⁺]³

[PO₄³⁻] = 5.9 × 10⁻¹⁷ / 0.0020³

[PO₄³⁻] = 7.4 × 10⁻⁹ M

Answer:

Krypton.

Explanation:

Krypton is an atom which has 36 protons in its nucleus. There are 31 isotopes of Krypton which have same number of protons i. e. 36, same number of electrons i. e. 36 but different number of neutrons. Isotope refers to those atoms having same atomic number i. e. number of proton but different mass number i. e. number of neutron. For example, in Krypton-78, there 36 protons and 42 neutrons.

Answer:

0.17 lb

Explanation:

78 g * (1 lb/454 g)=0.17 lb

If you want additional help with chemistry or another subject for FREE, check out growthinyouth.org.

Answer:

Amount of salt in 1 L seawater = 34 g

Explanation:

According to Archimedes' principle, mass of freshwater and cup = mass of equal volume of seawater

mass of freshwater = density * volume

1 cm³ = 1 mL

mass of freshwater = 0.999 g/cm³ * 735 cm³ = 734.265 g

mass of freshwater + cup = 734.265 + 25 = 759.265 g

Therefore,  mass of equal volume of seawater = 759.265 g

Volume of seawater displaced = 735 mL = 0.735 L (assuming the cup volume is negligible)

1 liter = 1000 cm³ = 1000 mL;

Density of seawater = mass / volume

Density of seawater = 759.265 g / 0.735 L = 1033.01 g/L

Density of freshwater in g/L = 0.999 g/ (1/1000) L = 999 g/L

mass of 1 Liter seawater = 1033.01 g

mass of 1 Liter freshwater = 999 g

mass of salt dissolved in 1 L of seawater = 1033.01 g - 999 g = 34.01 g

Therefore, amount of salt in 1 L seawater = 34 g

Answer:

ΔG = - 31.7kJ/mol

Explanation:

It is possible to find ΔG of a reaction at certain temperature knowing Kc following the equation:

ΔG = ΔG° + RT ln Q

ΔG° = -RT lnKc

ΔG = -RT lnKc + RT ln Q (1)

Where R is gas constant (8.314J/molK), T absolute temperature (350°C + 273.15 = 623.15K) and Q reaction quotient

For the reaction,

3H₂(g) + N₂(g) ⇄ 2NH₃(g)

Q = [NH₃]² / [H₂]³[N₂]

Where the concentrations of each chemical are:

[NH₃] = 1.0mol / 2.5L = 0.4M

[H₂] = 5.0mol / 2.5L = 2M

[N₂] = 2.5mol / 2.5L = 1M}

Q = [0.4M]² / [2M]³[1M]

Q = 0.02

And replacing in (1):

ΔG = -RT lnKc + RT ln Q

ΔG = -8.314J/molK*623.15K ln 9 + 8.314J/molK*623.15K ln 0.02

ΔG = - 31651J/mol

Answer:

8.68

Explanation:

pOH = 8.68

all you need is contained in the sheet

Answer:

Approximately [tex]8.68[/tex].

Explanation:

The [tex]\rm pOH[/tex] of a solution can be found from the hydroxide ion concentration [tex]\rm \left[OH^{-}\right][/tex] with the following equation:

[tex]\displaystyle \rm pOH = -\log_{10} \rm \left[OH^{-}\right][/tex].

On the other hand, the ion-product constant of water, [tex]K_{\text{w}}[/tex], relates the hydroxide ion concentration [tex]\rm \left[OH^{-}\right][/tex] of a solution to its hydronium ion concentration [tex]\rm \left[{H_3O}^{+}\right][/tex]:

[tex]K_\text{w} = \rm \left[{H_3O}^{+}\right] \cdot \rm \left[OH^{-}\right][/tex].

Hence the [tex]\rm \left[OH^{-}\right][/tex] of this solution:

[tex]\begin{aligned}\left[\mathrm{OH}^{-}\right] &= \frac{K_\text{w}}{\rm \left[{H_3O}^{+}\right]} \\ &= \frac{1.0 \times 10^{-14}}{4.8 \times 10^{-6}}\; \rm mol\cdot L^{-1} \approx 2.08333 \times 10^{-9}\; \rm mol\cdot L^{-1}\end{aligned}[/tex].

Therefore, the [tex]\rm pOH[/tex] of this solution would be:

[tex]\begin{aligned}\rm pOH &= -\log_{10} \rm \left[OH^{-}\right] \\ &\approx -\log_{10} \left(4.8 \times 10^{-6}\right) \approx 8.68\end{aligned}[/tex].

Note that by convention, the number of decimal places in [tex]\rm pOH[/tex] should be the same as the number of significant figures in [tex]\rm \left[OH^{-}\right][/tex].

For example, because the [tex]\rm \left[{H_3O}^{+}\right][/tex] from the question has two significant figures, the [tex]\rm \left[OH^{-}\right][/tex] here also has two significant figures. As a result, the [tex]\rm pOH[/tex] in the result should have two decimal places.

Answer:

Product: ethyl L-valinate

Explanation:

If we want to understand what it is the molecule produced we have to analyze the reagents. We have valine an amino acid, in this kind of compounds we have an amine group ([tex]NH_2[/tex]) and a carboxylic acid group ([tex]COOH[/tex]).  Additionally, we have an alcohol ([tex]CH_3CH_2OH[/tex]) in the presence of HCl (a strong acid) in the first step, and a base ([tex]OH^-[/tex]).

When we have an acid and an alcohol in a vessel we will have an esterification reaction. In other words, an ester is produced. As the first step, the oxygen in the C=O (in the carboxylic acid group) would be protonated. In the second step, the ethanol attacks the carbon in the C=O of the carboxylic acid group producing a new bond between the oxygen in the ethanol and the carbon in the carboxylic acid. In step 3, a proton is transferred to produce a better leaving group ([tex]H_2O[/tex]). In step 4, a water molecule leaves the main structure to produce again the double bond C=O. Finally, a base ([tex]OH^-[/tex]) removes the hydrogen from the C=O bond to produce ethyl L-valinate

See figure 1

I hope it helps!

Answer:

c

Explanation:

it's found inside the atomic nucleus

Answer:

PbCl₂ will precipitate from solution.

Explanation:

Statements are:

Insufficient information is given.

Both NH4NO3 and PbCl2 precipitate from solution.

No precipitate forms.

PbCl2 will precipitate from solution.

NH4NO3 will precipitate from solution.

The reaction of ammonium chloride (NH₄Cl) with lead nitrate (Pb(NO₃)₂) is:

Pb(NO₃)₂ + 2NH₄Cl → PbCl₂ + 2 NH₄NO₃

Talking of rules of solubility, all nitrates are soluble in water, that means NH₄NO₃ is soluble and no precipitate is formed.

In the same way, all chlorides are soluble except silver chloride and lead chloride. That means:

Answer:

hello the molecules are missing from your question below are the Generic molecules : [tex]ABE_{3}[/tex] and [tex]AB_{3} E[/tex]

answer : It can be determined  that both generic molecules are polar

It can be determined that both generic molecules have similar molecular shape

They have different Geometry

They differ in bond angles as well

Explanation:

The two generic molecules : [tex]ABE_{3}[/tex] and [tex]AB_{3} E[/tex]

comparing(similarities) these two generic molecules

It can be determined  that both generic molecules are polar

It can be determined that both generic molecules have similar molecular shape

differences between the generic molecules

They have different Geometry

They differ in bond angles as well

Answer:

[tex]\huge\boxed{Option \ 2}[/tex]

Explanation:

A reaction is spontaneous at all temperatures by the following combinations:

=> A negative enthalpy change ( [tex]\triangle H < 0[/tex] )

=> A positive entropy change ( [tex]\triangle S > 0[/tex] )

See the attached file for more better understanding!

from Gibbs Equation, [tex] \Delta G = \Delta H - T\Delta S [/tex]

reaction is spontaneous if $\Delta G$ is negative.

so, first option is not valid at high temperature, ($-h+ts$)

second, is always a spontaneous reaction, ($-h-ts$)

third, is never spontaneous ($+h+ts$)

4th is similar to second, spontaneous at higher temperatures ($+h-ts$)

Answer:

Entropy change of ice changing to water at 0°C is equal to 57.1 J/K

Explanation:

When a substance undergoes a phase change, it occurs at constant temperature.

The entropy change Δs, is given by the formula below;

Δs = q/T

where q is the quantity of heat absorbed or evolved in Joules and T is temperature in Kelvin at which the phase change occur

From the given data, T = 0°C = 273.15 K, q = 15.6 KJ = 15600 J

Δs = 15600 J / 273.15 K

Δs = 57.111 J/K

Therefore, entropy change of ice changing to water at 0°C is equal to 57.1 J/K

The entropy change of ice changing to water will be "57.1 J/K".

The shift in what seems like a thermodynamic system's condition of confusion is caused by the transformation of heat as well as enthalpy towards activity. Entropy seems to be greater mostly in a network with a high quantity or measure of chaos.

According to the question,

Temperature, T = 0°C or,

                          = 273.15 K

Heat, q = 15.6 KJ or,

            = 15600 J

We know the formula,

Entropy change, Δs = [tex]\frac{q}{T}[/tex]

By substituting the values, we get

                                 = [tex]\frac{15600}{273.15}[/tex]

                                 = 57.11 J/K

Thus the above answer is correct.    

Find out more information about Entropy change here:

https://brainly.com/question/6364271

Answer:

Option A. 1 0n

Explanation:

Details on how to balanced the equation for the reaction given in the question above can be found in the attached photo.

The missing part of the transmutation equation as it has been shown is 1/o n. Option A

Nuclear transmutation is the process of shifting the number of protons in an atom's nucleus to change one element into another. Nuclear processes that change one atomic nucleus into another with a different atomic number are involved.

The production of nuclear energy, radioactive decay, and the creation of new isotopes for use in science and industry all depend on nuclear transmutation, a fundamental idea in nuclear physics.

We have the equation as;

238/92 U + 12/6 C  ----> 244/98 Cf + 6 1/0 n

Learn more about nuclear transmutation:https://brainly.com/question/30078683

#SPJ6

Answer:

a

Explanation:

answer is a on edg