Answer:
C
Explanation:
When a ball rolls down a hill, Potential Energy Conversion takes place to Kinetic Energy.
I NEED THE ANSWER QUICK PLEASEE
The hottest ordinary star in our galaxy has a surface temperature of 53,000 K. Part A What is the peak wavelength of its thermal radiation
Answer:
[tex]\lambda=5.46\times 10^{-8}\ m[/tex]
Explanation:
The hottest ordinary star in our galaxy has a surface temperature of 53,000 K.
We need to find the peak wavelength of its thermal radiation.
Using Wein's law,
[tex]\lambda T=2.898\times 10^{-3}\\\\\lambda=\dfrac{2.898\times 10^{-3}}{53000}\\\\=5.46\times 10^{-8}\ m[/tex]
So, the peak wavelength of its thermal radiation is equal to [tex]5.46\times 10^{-8}\ m[/tex].
How can a wire become magnetic?
add a resistor
point it north
heat it up
run a current through it
Answer:
Moving electrons always create a magnetic field. Electrons moving along a wire make a magnetic field that goes in circles around the wire. When you bend the wire into a coil, the magnetic fields around each loop of the coil add up to make a long , thin magnet with north at one end and south at the other.
Explanation:
PLEASE HELP MEE THIS IS DUE IN 45 MINS
Answer:
The distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]
Explanation:
This deceleration situation can be analyzed by means of Work-Energy Theorem, where change in translational kinetic energy is equal to the work done by friction:
[tex]\frac{1}{2}\cdot m\cdot v^{2}-\mu\cdot m\cdot g \cdot s = 0[/tex] (1)
Where:
[tex]m[/tex] - Mass of the car, in kilogram.
[tex]v[/tex] - Initial velocity, in meters per second.
[tex]\mu[/tex] - Coefficient of friction, no unit.
[tex]s[/tex] - Travelled distance, in meters.
Then we derive an expression for the distance travelled by the vehicle:
[tex]\frac{1}{2}\cdot v^{2} = \mu \cdot g \cdot s[/tex]
[tex]s = \frac{v^{2}}{\mu\cdot g}[/tex]
As we notice, the distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]
A plane has a mass of 360,000 kg takes-off at a speed of 300 km/hr. i) What should be the minimum acceleration to take off if the length of the runway is 2.00 km.ii) At this acceleration, how much time would the plane need from starting to takeoff. iii) What force must the engines exert to attain this acceleration
Answer:
i) the minimum acceleration to take off is 22500 km/h²
ii) the required time needed by the plane from starting to takeoff is 0.0133 hrs
iii) required force that the engine must exert to attain acceleration is 625 kN
Explanation:
Given the data in the question;
mass of plane m = 360,000 kg
take of speed v = 300 km/hr = 83.33 m/s
i)
What should be the minimum acceleration to take off if the length of the runway is 2.00 km
from Newton's equation of motion;
v² = u² + 2as
we know that a plane starts from rest, so; u = 0
given that distance S = 2 km
we substitute
(300)² = 0² + ( 2 × a × 2 )
90000 = 4 × a
a = 90000 / 4
a = 22500 km/h²
Therefore, the minimum acceleration to take off is 22500 km/h²
ii) At this acceleration, how much time would the plane need from starting to takeoff.
from Newton's equation of motion;
v = u + at
we substitute
300 = 0 + 22500 × t
t = 300 / 22500
t = 0.0133 hrs
Therefore, the required time needed by the plane from starting to takeoff is 0.0133 hrs
iii) What force must the engines exert to attain this acceleration
we know that;
F = ma
acceleration a = 22500 km/hr² = 1.736 m/s²
so we substitute
F = 360,000 kg × 1.736 m/s²
F = 624960 N
F = 625 kN
Therefore, required force that the engine must exert to attain acceleration is 625 kN
A vertical wall (8.7 m x 3.2 m) in a house faces due east. A uniform electric field has a magnitude of 210 N/C. This field is parallel to the ground and points 42o north of east. What is the electric flux through the wall
Answer:
[tex]\phi=4344.72Nm^2/c[/tex]
Explanation:
From the question we are told that:
Dimension of Wall:
[tex](L*B)=(8.7 m * 3.2 m)[/tex]
Electric field [tex]B=210 N/C[/tex]
Angle [tex]\theta =42 \textdegree North[/tex]
Generally the equation for electric Flux is mathematically given by
[tex]\phi=EAcos\theta[/tex]
[tex]\phi=210*(8.7*3.2)*cos 42[/tex]
[tex]\phi=4344.72Nm^2/c[/tex]
PLEASE HELP ME WITH THIS ONE QUESTION
A photon has 2.90 eV of energy. What is the photon’s wavelength? (h = 6.626 x 10^-19, 1 eV = 1.6 x 10^-19 J)
A) 677 nm
B) 218 nm
C) 345 nm
D) 428 nm
Answer:
The correct option is D.
Explanation:
The wavelength of the photon can be calculated with the following equation:
[tex] E = h\frac{c}{\lambda} [/tex]
Where:
E: is the energy of the photon = 2.90 eV
h: is the Planck's constant = 6.62x10⁻³⁴ J.s
c: is the speed of light = 3x10⁸ m/s
λ: is the wavelength
Hence, the photon's wavelength is:
[tex] \lambda = \frac{hc}{E} = \frac{6.62 \cdot 10^{-34} J*s*3.0 \cdot 10^{8} m/s}{2. 90 eV*\frac{1.6 \cdot 10^{-19} J}{1 eV}} = 428 nm [/tex]
Therefore, the correct option is D.
I hope it helps you!
A 105 kg astronaut carrying a 16 kg tool bag finds himself separated from his spaceship by 18 m and moving away from the spaceship at 0.1 m/s. To get back to the spaceship, he throws the tool bag away from the spaceship at 4.5 m/s (relative to the station). How long (in s) will he take to return to the spaceship
Answer:
[tex]T=22.5sec[/tex]
Explanation:
From the question we are told that:
Mass of astronaut [tex]m_a=105kg[/tex]
Mass of tool [tex]m_t=16kg[/tex]
Distance [tex]d=18m[/tex]
Velocity of separation [tex]v_s= 0.1m/s[/tex]
Velocity of tool bag [tex]v_t=4.5m/s[/tex]
Generally the equation for momentum is mathematically given by
[tex]P=mv[/tex]
Therefore
Initial Momentum before drop
[tex]P_1=0.1(105+16)[/tex]
[tex]P_1=12.1[/tex]
Initial Momentum after drop
[tex]P_2=-16(4.5)+105V[/tex]
Therefore
Since [tex]P_1=P_2[/tex]
[tex]-72+105V=12.1[/tex]
[tex]V=0.8m/s[/tex]
Generally the equation for Time T is mathematically given by
[tex]T=\frac{d}{V}[/tex]
[tex]T=\frac{18}{0.8}[/tex]
[tex]T=22.5sec[/tex]
20 pts.
A man forgets that he set his coffee cup on top of his car. He starts to drive and the coffee CUP rolls off the car onto the road. How does this scenario demonstrate the first law of motion? Be specific and use the words from the law in your answer.
Answer:
The cup is acted upon by an unbalanced force which is the acceleration of the car, but before it was an object at rest that stayed at rest.
Explanation:
Newton's first law of motion states, "if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force."
Since the cup is at rest while sitting on top of the car, it stays at rest as the car begins to move. Since the car is accelerating and the cup is not, the cup falls off of the car.
According to ____________ , the randomness of the universe is constantly increasing.
a. The first law of thermodynamics
b. The zeroth law of thermodynamics
c. The second law of thermodynamics
Answer:
According to " The second law of thermodynamics", the randomness of the universe is constantly increasing?
Explanation:
So answer option C. Have a great summer.
To calculate the final enthalpy of the overall chemical equation, which step must occur?
Answer:
Explanation:
Reverse the second equation, and change the sign of the enthalpy
What does it mean when work is positive?
O Velocity is greater than kinetic energy
O Kinetic energy is greater than velocity
The environment did work on an object.
O An object did work on the environment.
d. An object did work on the environment.
Explanation:Work is defined in many contexts. Some of these are;
i. Work is the product of force and displacement. In this case, work done is positive if the force applied on an object or body and the displacement caused by the force are in the same direction. If instead the force and displacement are in opposite direction, then the work done will be negative. If it is the case the force and the displacement are perpendicular to each other, the work done is zero.
ii. In the first law of thermodynamics, the internal energy of a system is the sum of the work done and the heat exchanged between the system and the environment. Therefore, work done is the difference between the internal energy of a system and the heat exchanged between the system and the environment.
In this case, work is said to be positive if work is done by the system (object) on the environment. It is negative if work is done by the environment on the system (object).
Answer:
its c
Explanation:
A photon with a frequency of 5.02 × 1014 hertz is absorbed by an excited hydrogen atom. This causes the electron to be ejected from the atom, forming an ion. Calculate the energy of this photon in joules. [Show all work, including the equation and substitution with units.] Determine the energy of this photon in electron-volts. What is the number of the lowest energy level (closest to the ground state) of a hydrogen atom that contains an electron that would be ejected by the absorption of this photon?
Answer:
Explanation:
An atom emits a photon (particle of light) when transitioning from a ground state to its excited state. To obey conservation of energy, the energy gained by the atom when an electron moves to a lower energy level is equal to the energy it loses in emitting the photon. (The energy of a photon is E = hf, where E is the energy, h is Planck's constant, and f is the frequency of the photon.) Conversely, when an atom absorbs a photon (as is the case in absorption spectra), the electron absorbing the photon moves to a higher energy level.
The triceps muscle in the back of the upper arm extends the forearm. This muscle in a professional boxer exerts a force of 2.00\times 10^32.00×10 ^3 N with an effective perpendicular lever arm of 3.00 cm, producing an angular acceleration of the forearm of 120 rad/s^2 .
What is the moment of inertia of the boxer's forearm?
Answer:
Explanation:
From the given information:
The torque produced due to the force can be expressed as:
[tex]\tau = F \times r[/tex]
where;
[tex]\tau[/tex] = torque
F = force exerted
r = lever's arm radius
[tex]\tau[/tex] = [tex]2.00 \times 10^3 \times 0.03 m[/tex]
[tex]\tau[/tex] = 60 N.m
However, equating the torque with the moment of inertia & angular acceleration, we use the equation:
[tex]\tau[/tex] = I∝
60 Nm = I × 120 rad/s²
I = 60 Nm/120 rad/s²
I = 0.5 kg.m²
Imagine two circular plates; one is solid and the other has a hole cut out of the center. Both plates have the same radius, same thickness, and same mass. The same force F is applied tangential to the edge of each plate in such a way that the plates rotate about an axis passing through the center and perpendicular to the surface of the plates.
Which one of the following statements is true regarding the angular acceleration?
1. Both plates will rotate with the same angular acceleration.
2. The solid plate will have the greater angular acceleration.
3. The plate with the hole will have the greater angular acceleration.
Which of the following statements helps to explain the question asked above? (Select all that apply.)
1. Because both plates have the same mass, they will have the same moment of inertia.
2. Angular acceleration is inversely proportional to the moment of inertia.
3. Angular acceleration is directly proportional to the moment of inertia.
4. The plate with the hole has its mass distributed further out from the axis of rotation, which will increase its moment of inertia.
5. Both plates will be subjected to the same torque.
Answer:
the correct statement is 2. The solid plate will have the greater angular acceleration.
the correct phrase is 4. The plate with the hole has its mass distributed further out from the axis of rotation, which will increase its moment of inertia.
Explanation:
Newton's second law expression for rotational motion is
τ = I α (1)
where the torque is
τ = F r
in this case, as the discs have the same radius and the applied force is the same, the torque is the same on the two discs.
The moment of inertia is given by the expression
I =∫ r² dm
for bodies with high symmetry are tabulated
the moment of inertia for in disk solid is I₁ = ½ m R₂²
the moment for a disk with a hole I₂ = ½ m (R₁² + R₂²)
We can see that the moment of inertia of the disk with the hole is greater than the moment of inertia of the solid disk.
Let's use equation 1
α = τ/I
therefore the angular acceleration is lower for the body with the higher moment of inertia, consequently the solid disk has higher angular acceleration
the correct statement is 2
The reason is because the moment of inertia is higher for the hollow disk.
the correct phrase is 4
find the resistance of wire of
0.65m Radius 0.25
and
resistivity 3x10-6 OHM
Complete Question:
Find the resistance of a wire of length 0.65 m, radius 0.25 mm and resistivity 3 * 10^{-6} ohm-metre.
Answer:
Resistance = 9.95 Ohms
Explanation:
Given the following data;
Length = 0.65 m
Radius = 0.25 mm to meters = 0.00025 m
Resistivity = 3 * 10^{-6} ohm-metre.
To find the resistance of the wire;
Mathematically, resistance is given by the formula;
[tex] Resistance = P \frac {L}{A} [/tex]
Where;
P is the resistivity of the material. L is the length of the material.A is the cross-sectional area of the material.First of all, we would find the cross-sectional area of the wire.
Area of circle = πr²
Substituting into the equation, we have;
Area = 3.142 * (0.00025)²
Area = 3.142 * 6.25 * 10^{-8}
Area = 1.96 * 10^{-7} m²
Now, to find the resistance of the wire;
[tex] Resistance = 3 * 10^{-6} * \frac {0.65}{1.96 * 10^{-7}} [/tex]
[tex] Resistance = 3 * 10^{-6} * 3316326.531 [/tex]
Resistance = 9.95 Ohms
what is simple definition of democracy
it's a form of government where people elect their representatives
Answer:
The word democracy itself means rule by the people.
How long does take for a freely falling object to reach 4.0 m/s
Answer :
Considering initial velocity is 0,
It takes about 0.4 seconds.
Use the equation v-u =at
4-0 = 9.8×t
t = 4/9.8 = 0.4 seconds approximately.
A 180 g model airplane charged to 18 mC and traveling at 2.2 m/s passes within 8.6 cm of a wire, nearly parallel to its path, carrying a 30 A current. What acceleration (in g's) does this interaction give the airplane?
Answer:
[tex]a=0.2*10^{-5}g[/tex]
Explanation:
From the question we are told that:
Mass [tex]M=180=>0.18kg[/tex]
Charge [tex]Q=18mC=18*10^-^3C[/tex]
Velocity [tex]v=2.2m/s[/tex]
Length of Wire [tex]L=8.6cm=>0.086[/tex]
Current [tex]I=30A[/tex]
Generally the equation for Magnetic Field of Wire B is mathematically given by
[tex]B=\frac{\mu_0*I}{2\pi*l}[/tex]
[tex]B=\frac{4*3.14*10^-^7*I}{2*3.14*8.6}[/tex]
[tex]B=6.978*10^{-5}T[/tex]
Generally the equation for Force on the plane F is mathematically given by
[tex]F=qvB[/tex]
Therefore
[tex]ma=qvB[/tex]
[tex]a=\frac{qvB}{m}[/tex]
[tex]a=\frac{18*10^{-5}83.4*6.978*10^{-5}}{0.18kg}[/tex]
[tex]a=2.37*10^{-5}[/tex]
Therefore in Terms of g's
[tex]a=\frac{2.37*10^{-5}}{9.8}[/tex]
[tex]a=0.2*10^{-5}g[/tex]
A typical ceiling fan running at high speed has an airflow of about 2.00 ✕ 103 ft3/min, meaning that about 2.00 ✕ 103 cubic feet of air move over the fan blades each minute.
Determine the fan's airflow in m3/s.
Answer:
0.94 m³/s
Explanation:
From the question given above, the following data were obtained:
Air flow (in ft³/min) = 2×10³ ft³/min
Air flow (in m³/s) =.?
Next, we shall convert 2×10³ ft³/min to m³/min. This can be obtained as follow:
35.315 ft³/min = 1 m³/min
Therefore,
2×10³ ft³/min = 2×10³ ft³/min × 1 m³/min / 35.315 ft³/min
2×10³ ft³/min = 56.63 m³/min
Finally, we shall convert 56.63 m³/min to m³/s. This can be obtained as follow:
1 m³/min = 1/60 m³/s
Therefore,
56.63 m³/min = 56.63 m³/min × 1/60 m³/s ÷ 1 m³/min
56.63 m³/min = 0.94 m³/s
Thus, 2×10³ ft³/minis equivalent to 0.94 m³/s.
A rod of 3.0-m length and a square (2.0 mm X 2.0 mm) cross section is made of a material with a resistivitYof 6.0 X 10-8 Ω m. If a potential difference of 0.60 V is placed across the ends of the rod, at what rate is heat generated in the rod in watt.
Select one:
a. 24
b. 12
c. 4
d. 8
45. Pressure in air undergoes a decrease when the air
a) rises to higher altitudes.
b) accelerates to higher speed.
c) fills a greater space.
d) All of these.
Unpolarized light of intensity 0.0288 W/m2 is incident on a single polarizing sheet. What is the rms value of the electric field component transmitted
Answer:
the rms value of the electric field component transmitted is 3.295 V/m
Explanation:
Given;
intensity of the unpolarized light, I = 0.0288 W/m²
For unpolarized light, the relationship between the amplitude electric field and intensity is given as;
[tex]E_{max} = \sqrt{2\mu_0cI} \\\\E_{max} = \sqrt{2(4\pi \times 10^{-7})(3\times 10^8)(0.0288)} \\\\E_{max} = 4.66 \ V/m[/tex]
The relationship between the rms value of the electric field and the amplitude electric field is given as;
[tex]E_{rms} = \frac{E_0}{\sqrt{2} } =\frac{E_{max}}{\sqrt{2} } \\\\E_{rms} = \frac{4.66}{\sqrt{2} }\\\\E_{rms} = 3.295 \ V/m[/tex]
Therefore, the rms value of the electric field component transmitted is 3.295 V/m
Two identical loudspeakers 2.30 m apart are emitting sound waves into a room where the speed of sound is 340 m/s. Abby is standing 5.00 m in front of one of the speakers, perpendicular to the line joining the speakers, and hears a maximum in the intensity of the sound. Part A What is the lowest possible frequency of sound for which this is possible
Answer:
By the Pythagorean Theorem the distances from the speakers os
5 and 5.5 (rounding) meters - let y be the wavelength in the solution
n y = 5 n is number of wavelengths from speaker
(n + m) y = 5.5 m must be integral for constructive interference
m y = .5 subtracting equations
m = 2 and y = ,25 for the above conditions
(n + 2) y = 5.5 substituting for m
n = 5.5 / .25 - 2 = 20
f = v / y using frequency of sound
f = 340 / .25 = 1360 / sec for lowest frequency
Check: D1 = y n = ,25 * 20 = 5
and D2 = .25 * 22 = 5.5 for the distances traveled
A Child stands on the bus Remains Still When The bus is at rest. When the bus moves forward AndeaThe bus is at rest. When the bus moves forward And then slows down, the children the Contnues moving forward at the original speed. This is an example of
Answer:
inertia
Explanation:
When a mass of 3.0-kg is hung on a vertical spring, it stretches by 0.085 m. Determine
the period of oscillation of a 4.0-kg object suspended from this spring.
Answer:
the period of oscillation of the given object is 0.14 s
Explanation:
Given;
mass of the object, m = 3 kg
extension of the spring, x = 0.085 m
The spring constant is calculated as follows;
[tex]F = mg = \frac{1}{2} ke^2\\\\2mg = ke^2\\\\k = \frac{2mg}{e^2} \\\\k = \frac{2\times 3 \times 9.8}{(0.085)^2} \\\\k = 8,138.41 \ N/m[/tex]
The angular speed of a 4 kg object is calculated as follows;
[tex]\omega = \sqrt{\frac{k}{m} } \\\\\frac{2\pi }{T} = \sqrt{\frac{k}{m} } \\\\T= 2\pi \sqrt{\frac{m}{k} } \\\\T = 2\pi \sqrt{\frac{4}{8138.41} }\\\\T = 0.14 \ s[/tex]
Therefore, the period of oscillation of the given object is 0.14 s
Consider the following possibilities and select the correct choice.
1. Tx Ty > Tz
2. Tx Ty < Tz
3. Tx Ty = Tz
Answer:
Tx not but mybe
Explanation:
for that reason its just trying to help
A crane raises a crate with a mass of 150 kg to a height of 20 m. Given that
the acceleration due to gravity is 9.8 m/s2, what is the crate's potential energy
at this point?
Answer:
[tex]\boxed {\boxed {\sf 29,400 \ Joules}}[/tex]
Explanation:
Gravitational potential energy is the energy an object possesses due to its position. It is the product of mass, height, and acceleration due to gravity.
[tex]E_P= m \times g \times h[/tex]
The object has a mass of 150 kilograms and is raised to a height of 20 meters. Since this is on Earth, the acceleration due to gravity is 9.8 meters per square second.
m= 150 kg g= 9.8 m/s²h= 20 mSubstitute the values into the formula.
[tex]E_p= 150 \ kg \times 9.8 \ m/s^2 \times 20 \ m[/tex]
Multiply the three numbers and their units together.
[tex]E_p=1470 \ kg*m/s^2 \times 20 m[/tex]
[tex]E_p=29400 \ kg*m^2/s^2[/tex]
Convert the units.
1 kilogram meter square per second squared (1 kg *m²/s²) is equal to 1 Joule (J). Our answer of 29,400 kg*m²/s² is equal to 29,400 Joules.
[tex]E_p= 29,400 \ J[/tex]
The crate has 29,400 Joules of potential energy.
Answer:
29,400 J
Explanation:
did the quiz <3
What happens if you move a magnet near a coil of wire?
A) current is induced
B)power is consumed
C)the coil becomes magnetized
D) the magnets field is reduced
what is newtons 2nd law
According to the Newton's second law :- The acceleration of an object is directly related to the net force and inversely related to its mass. Acceleration of an object depends on two things, force and mass.
