When the selling division in an internal transfer has unsatisfied demand from outside customers for the product that is being transferred, then the lowest acceptable transfer price as far as the selling division is concerned is:

Answers

Answer 1

Answer: c. the market price charged to outside customers

Explanation:

When a division is able to sell its products to customers outside the company for a certain price but instead has to transfer these to another division in the company, the minimum transfer price will have to be the selling price to the customers outside so that the division would not make losses.

The division that this good is transferred to will then reflect the cost of acquiring the goods as that selling price. This cost will be accounted for when the new division wants to sell their own goods that way this cost will be recuperated on a company level.


Related Questions

Which of the following is a major difference between a budget constraint and production possibilities frontier?

a. A production possibilities frontier conveys the relative prices of the two goods, whereas a budget constraint accounts for diminishing returns.
b. A production possibilities frontier is usually straight, whereas a budget constraint is typically curved.
c. A budget constraint typically has a constant slope, whereas the slope of a production possibilities frontier is usually different at various points.
d. There is no difference. They convey the same information.

Answers

Answer:

c

Explanation:

The Production possibilities frontiers is a curve that shows the various combination of two goods a company can produce when all its resources are fully utilised.  

The PPF is concave to the origin. This means that as more quantities of a product is produced, the fewer resources it has available to produce another good. As a result, less of the other product would be produced. So, the opportunity cost of producing a good increase as more and more of that good is produced.  

So, the PPF exhibits diminishing return. The slope of the PPF is different at different points. this makes the PPF a curve

the budget constraint is a straight line that shows the various combinations of goods a consumer can consume given her income. the budget constraint is a straight line because the slope is constant at each point on the curve

Also, the slope of the budget constraint is the relative prices of the two goods

Job-Order Costing versus Process Costing Required: Identify each of the following types of businesses as either job-order or process costing. a. Hospital services b. Custom cabinet making c. Toy manufacturing d. Soft-drink bottling e. Airplane manufacturing (e.g., 767s) f. Personal computer assembly g. Furniture making (e.g., computer desks sold at discount stores) h. Custom furniture making i. Dental services j. Paper manufacturing k. Nut and bolt manufacturing l. Auto repair m. Architectural services n. Landscape design services o. Flashlight manufacturing

Answers

Answer:

Job-Order Costing versus Process Costing

Types of businesses using job order costing:

a. Hospital services

b. Custom cabinet making

e. Airplane manufacturing (e.g., 767s)

h. Custom furniture making

i. Dental services

l. Auto repair

m. Architectural services

n. Landscape design services

Types of businesses using processing costing:

c. Toy manufacturing

d. Soft-drink bottling

f. Personal computer assembly

g. Furniture making (e.g., computer desks sold at discount stores)

j. Paper manufacturing

k. Nut and bolt manufacturing

o. Flashlight manufacturing

Explanation:

In job order costing, the manufacturer tracks its prime costs to individual products or jobs.  This means that the costs of each job can be computed separately because costs are traced to each job.  Under process costing, the prime costs are tracked to the department, process or batch, and not to individual products or jobs.

A company paid $0.85 in cash dividends per share. Its earnings per share is $3.50, and its market price per share is $35.50. Its dividend yield equals:

Answers

Answer: 2.4%

Explanation:

Cash dividend = $0.85

Earnings per share = $3.50

Market price per share = $35.50

The dividend yield will be calculated as:

= Cash dividends / Market price per share

= $0.85 / $35.50

= 0.024

= 2.4%

The dividend yield is 2.4%.

Short-term investments are intended to be converted into cash within the longer of one year or the operating cycle of the business, and are readily convertible to cash. True or False

Answers

Answer:

True

Explanation:

The reasons why many companies invest in other companies includes

1. Due to excess cash not needed immediately, so invested to earn additional income to use for operations

2. Long- term strategic reasons etc

The criteria for a current asset is that the investment must be liquid and be able to convert to cash within one year (or become a long-term investment).

Short-term investments

This is a current assets. It is also called marketable securities. This is a form of an investments made in marketable securities that can be converted easily to cash which a company plans to hold for 1 year or less than one year.

The 3 categories of short-term investments. They includes:

1. Trading securities

2. available-for-sale securities

3. Held to maturity investment.

Forner, Inc., manufactures and sells two products: Product Z1 and Product Z8. The company has an activity-based costing system with the following activity cost pools, activity measures, and expected activity:
Estimated Expected Activity
Activity Cost Pools Activity Measures Overhead Cost Product Z1 Product Z8 Total
Labor-related DLHs $112,190 600 2,000 2,600
Machine setups setups 40,440 500 700 1,200
Order size MHs 609,770 3,000 3,200 6,200
$762,400
The activity rate for the Machine Setups activity cost pool under activity-based costing is closest to:
$203.26 per setup
$190.55 per setup
$122.97 per setup
$33.70 per setup

Answers

Answer:

Machine setups= $33.7 per setup

Explanation:

Giving the following information:

Activity Cost Pools Activity Measures Overhead Cost Product Z1 Product Z8 Total

Machine setups setups 40,440 500 700 1,200

To calculate the activity rate for Machine setup, we need to use the following formula:

Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base

Machine setups= 40,440 / 1,200

Machine setups= $33.7 per setup

The country of Bolivia had a Gross Domestic Product of $79 billion in 2016 and a population of 11 million people, the GDP per capita would be ________.

Answers

Answer:

The GDP per capita of country of Bolivia would be $7,181.82.

Explanation:

GDP Per capita refers to a measure that calculates a country's economic output per person by dividing its GDP by its population.

Therefore, we have:

GDP per capita = GDP / Population = $79 billion / 11 million = $79,000,000,000 / $11,000,000 = $7,181.82

Therefore, the GDP per capita of country of Bolivia would be $7,181.82.

Sims Company, a manufacturer of tablet computers, began operations on January 1, 2019. Its cost and sales information for this year follows. Manufacturing costs Direct materials $ 40 per unit Direct labor $ 60 per unit Overhead costs Variable $ 30 per unit Fixed $ 7,000,000 (per year) Selling and administrative costs for the year Variable $ 770,000 Fixed $ 4,250,000 Production and sales for the year Units produced 100,000 units Units sold 70,000 units Sales price per unit $ 350 per unit 1. Prepare an income statement for the year using variable costing. 2. Prepare an income statement for the year using absorption costing.

Answers

Answer:

Sims Company

Income Statements                   Variable Costing       Absorption Costing

Sales revenue                             $24,500,000               $24,500,000

Cost of goods sold:

Variable cost of manufacturing      9,100,000                     9,100,000

Variable cost of selling and admin.  770,000                                    0

Fixed manufacturing cost                             0                    4,900,000

Total cost of goods sold              $9,870,000                $14,000,000

Contribution margin                   $14,630,000                                   0

Gross profit                                                    0               $10,500,000

Fixed /Period costs:

Fixed manufacturing cost           $7,000,000                                  0

Selling and administrative expenses:

Variable                                                                              $ 770,000

Fixed                                              4,250,000                  4,250,000

Total period/fixed costs             $11,250,000               $5,027,000

Net operating income                $3,380,000                $5,473,000

Explanation:

a) Data and Calculations:

Manufacturing costs

Direct materials $ 40 per unit

Direct labor $ 60 per unit

Overhead costs

Variable $ 30 per unit

Total variable manufacturing cost per unit = $130

Fixed $ 7,000,000 (per year)

Selling and administrative costs for the year

Variable $ 770,000

Fixed $ 4,250,000

Production and sales for the year

Units produced 100,000 units

Units sold 70,000 units

Ending inventory = 30,000 units

Sales price per unit $ 350 per unit

Consider the following information for the manufacturing cell of Stripes Company: Maximum units produced in a quarter 250,000 units Actual units produced in a quarter 200,000 units Productive hours in a quarter 50,000 hours Compute the theoretical velocity and the actual velocity in units per hour.

Answers

Answer: Theoretical velocity = 5 units per hour.

Actual velocity = 4 units per hour.

Explanation:

Based on the information given in the question, the theoretical velocity will be:

Firstly, we'll calculate the theoretical cycle time which will be:

= (50,000 hours x 60 minutes per hour) / 250,000 units

= 12 minutes per unit

Actual cycle time will be:

= (50,000 hours x 60 minutes per hour) / 200,000 units

= 15 minutes per unit

The theoretical velocity:

= 60 minutes / 12 minutes

= 5 units per hour.

2. The e actual velocity in units per hour:

= 60 minutes per hour / 15 minutes per unit

= 4 units per hour

g Find the monthly payment and estimate the remaining balance (to the nearest dollar). Assume interest is on the unpaid balance. 5-year car loan for $9700 at 5%; remaining balance after 4 years.

Answers

Answer:

Monthly payment $102.88

Outstanding balance after year 4 $1,201.76

Explanation:

First and foremost, the car loan amount of $9,700 is the present value of all monthly payments for 5 years as shown below:

PV=monthly payment*(1-(1+r)^-n/r

PV=car loan amount=$9,700

monthly payment=unknown

r=monthly interest rate=5%/12=0.004166667

n=number of monthly payments in 5 years=5*12=60

$9700=monthly payment*(1-(1+0.004166667)^-120/0.004166667

$9700=monthly payment*(1-(1.004166667)^-120/0.004166667

$9700=monthly payment*(1-0.607161016 )/0.004166667

$9700=monthly payment*0.392838984 /0.004166667

$9700=monthly payment*94.28134862

monthly payment=$9700/94.28134862

monthly payment=$102.88  

The outstanding balance after year 4 is the present value of monthly payments for the remaining 1 year(12 months)

PV=$102.88*(1-(1+0.004166667)^-12/0.004166667

PV=$102.88*(1-(1.004166667)^-12/0.004166667

PV=$102.88*(1-0.951328238 )/0.004166667

PV=$102.88*0.048671762 /0.004166667

PV=$1,201.76

If the return on stock A in year 1 was 6 %, in year 2 was 3 %, in year 3 was 18 % and in year 4 was 3 %, what was the standard deviation of returns for stock A over this four year period? (Round your answer to 1 decimal place and record without a percent sign. If your final answer is negative, place a minus sign before the number with no space between the sign and the number).

Answers

Answer:

12.4

Explanation:

We need to,first of all, determine the arithmetic average return of all the returns, which is the sum of the returns divided by the number of returns

average return=(6%+3%+18%+3%)/4

average return=7.50%

Years return (return-average return) (return-average return)^2

1          6.00%        -1.50%                            0.022500%

2          3.00%       -4.50%                             0.202500%

3         18.00%         10.50%                               1.102500%

4         3.00%       -4.50%                               0.202500%

        average return 7.50%           variance 1.530000%

                   standard deviation=variance^(1/2) 12.4%

Medical profession is a very sensitive profession.Do U agree?Give 5 reason​

Answers

Answer:

Medical profession is very sensitive and intellectual where human life is at risk. A successful effort of a doctor can save a life. Due to that, a doctor is known as 2nd God. When he attempts a major and long surgery, his endurance, hard work and mental ability spotlight his character.

Investing $2,000,000 in TQM's Channel Support Systems initiative will at a minimum increase demand for your products 3.0% in this and in all future rounds. Looking at the Round 0 Inquirer for Andrews, last year's sales were $163,189,230. Assuming similar sales next year, the 3.0% increase in demand will provide $4,895,677 of additional revenue. With the overall contribution margin of 34.1%, after direct costs this revenue will add $1,669,426 to the bottom line. For simplicity, assume that the demand increase and margins will remain at last year's levels. How long will it take to achieve payback on the initial $2,000,000 TQM investment, rounded to the nearest

Answers

Answer:

the payback period is 14 months

Explanation:

The computation of the payback period is shown below:

Profit is

= $2,000,000 - $1,669,426

= $330,574

Now payback period is

= 1 + $330,574 ÷ $1,669,426

= 1 +0.198 years

= 1.198 years

= 14.37 months

= 14 months

Hence, the payback period is 14 months

During July, the production department of a process operations system completed and transferred to finished goods 24,000 units that were in process at the beginning of July and 72,000 that were started and completed in July. July's beginning inventory units were 100% complete with respect to materials and 30% complete with respect to labor. At the end of July, 29,000 additional units were in process in the production department and were 100% complete with respect to materials and 35% complete with respect to labor. The beginning inventory included labor cost of $52,400 and the production department incurred direct labor cost of $451,250 during July. Compute the direct labor cost per equivalent unit for the department using the weighted-average method.

Answers

Answer:

the direct labor cost per equivalent unit for the department is $4.74 per unit

Explanation:

The computation of the direct labor cost per equivalent unit for the department is given below:

Equivalent units for direct labor cost is

= 24,000 unit + 72,000 units + 35% of 29,000

= 24,000 units + 72,000 units + 10,150 units

= 106,150 units

Now the direct cost per equivalent unit is

= ($52,400 + $451,250) ÷ 106,150 units

= $4.74 per unit

Hence, the direct labor cost per equivalent unit for the department is $4.74 per unit

Question 12
0.5 pts
The goal of any monopolist is to maximize:
economic profits.
normal profits.
price.
consumer welfare.
output.

Answers

Answer:

economic profits.

Explanation:

A monopoly is a market structure which is typically characterized by a single-seller who sells a unique product in the market by dominance. This ultimately implies that, it is a market structure wherein the seller has no competitor because he is solely responsible for the sale of unique products without close substitutes.

Also, a monopolist refers to any individual that deals with the sales of unique products in a monopolistic market.

Generally, the goal of any monopolist is to maximize economic profits.

Basically, a monopolist earns an economic profit when the average total cost (AVC) of his goods and services is less than price.

Unlike a business firm operating in a perfectly competitive market, a monopolist can continue to earn economic profits in the long-run because there exist an extremely high level of barriers to entry for new business firms.

If a company spends $80 million to build facility space sufficient to hold 5 million pairs of footwear-making equipment at a site in Latin America, then the company's annual depreciation costs for this facility space will be

Answers

Answer: $8,000,000

Explanation:

From the question given, the cost of the building facility is $80 million. Also, it should be noted that the default rate for depreciation is given as 10%, therefore, the company's annual depreciation costs for this facility space will be:

= Depreciation rate × Cost of building

= 10% × $80,000,000

= 0.1 × $80,000,000

= $8,000,000

The current asset section of the Excalibur Tire Company’s balance sheet consists of cash, marketable securities, accounts receivable, and inventory. The December 31, 2021, balance sheet revealed the following:

Inventories $840,000
Total assets $2,800,000
Current ratio 2.25
Acid-test ratio 1.2
Debt to equity ratio 1.8

Determine the following 2021 balance sheet items:

a. Current assets
b. Shareholders' equity
c. Noncurrent assets
d. Long-term liabilities

Answers

Answer:

a. Current assets = $1,800,000

b. Shareholders' equity = $1,000,000

c. Noncurrent assets = $1,000,000

d. Long-term liabilities = $1,000,000

Explanation:

a. Current assets

Current liabilities = Inventories / (Current ratio - Acid-test ratio) = $840,000 / (2.25 - 1.2) = $800,000

Since Current assets / Current liabilities = 2.25 = Current ratio, therefore, we have:

Current assets = Current ratio * Current liabilities = 2.25 * $800,000 = $1,800,000

b. Shareholders' equity

Debt to equity ratio = Total liabilities / Shareholders' equity = 1.8

Total liabilities = (1.8 * Shareholders' equity)

Total assets = $2,800,000

Total assets = Total liabilities + Shareholders' equity ………….. (1)

Substituting all the relevant values into equation (1) and solve for Shareholders' equity, we have:

$2,800,000 = (1.8 * Shareholders' equity) + Shareholders' equity

$2,800,000 = (1.8 + 1) * Shareholders' equity

$2,800,000 = 2.8 * Shareholders' equity

Shareholders' equity = $2,800,000 / 2.8 = $1,000,000

c. Noncurrent assets

Noncurrent assets = Total assets - Current assets = $2,800,000 - $1,800,000 = $1,000,000

d. Long-term liabilities

Long-term liabilities = Total assets -  Current liabilities - Shareholders' equity = $2,800,000 - $800,000 - $1,000,000 = $1,000,000

If the price elasticity of supply is 0.5 and the quantity supplied decreases by 6%, then the price must have decreased by 3%. a. True b. False

Answers

Answer: False

Explanation:

The price elasticity of supply measures the change in quantity supplied when the price changes.

The basic trend is that when price increases, quantity supplied increases as well. The reverse is true.

Price elasticity of supply = %Change in quantity supplied / % change in price

0.5 = -6% / Change in price

0.5 * Change in price = -6%

Change in price = -6% / 0.5

= -12%

The statement above is therefore false because price should have reduced by 12% for quantity supplied to reduce by 6%

Chicotti Company has 6,000 units in beginning work in process, 30% complete as to conversion costs, 75,000 units transferred out to finished goods, and 2,000 units in ending work in process 20% complete as to conversion costs. The beginning and ending inventory is fully complete as to materials costs. How much are equivalent units for materials if the FIFO method is used

Answers

Answer:

71,000

Explanation:

Calculation to determine How much are equivalent units for materials if the FIFO method is used

Using this formula

Equivalent units for materials=(Units transferred out to Finished goods + Units in ending work in process – Units in beginning work in process)

Let plug in the formula

Equivalent units for materials=75,000 + 2,000 – 6,000

Equivalent units for materials= 71,000

Therefore the equivalent units for materials if the FIFO method is used will be 71,000

Wasilko Corporation produces and sells one product The budgeted selling price per unit is $114. Budgeted unit sales for February is 9,900 units. Each unit of finished goods requires 6 pounds of raw materials. The raw materials cost $4.00 per pound. The direct labor wage rate is $24.00 per hour. Each unit of finished goods requires 2.4 direct labor-hours. Manufacturing overhead is entirely variable and is $9.00 per direct labor-hour. The variable selling and administrative expense per unit sold is $1.60. The fixed selling and administrative expense per month is $70,000. The estimated net operating income (loss) for February is closest to:

Answers

Answer: $21,080

Explanation:

First calculate the contribution margin per unit

= Sales - Variable costs

= Selling price - Raw materials - Direct labor cost - Manufacturing overhead - Variable selling and administrative expense

= 114 - (6 * 4) - (2.4 * 24) - (9 * 2.4) - 1.60

= $9.20

The Contribution margin is:

= 9.20 * 9,900 units

= $91,080

Net operating income = Contribution margin - fixed cost

= 91,080 - 70,000

= $21,080

Select the market segment that looks the most promising?
1. Luxury trenfollowers
Segment size 5,000(5%)
Growth rate 7%

2. School children
Segment size 35,000 (35%)
Growth rate 1%

3. University students
Segment size 24,099(24%)
Growth rate 5%

4. Outdoor enthusiasts
Segment size 14,000 (14%)
Growth rate 5%

5. Urban commuters
Segment size 20,000 (20%)
Growth rate 3%

Answers

Answer:

Luxury Trend followers

Explanation:

The consider which market segment shows the most or higest level of promise, we may have to the growth rate of each segment, which is the percentage change in earnings or revenue over a specific period of time. From the data given, the market segment with the greatest growth rate is the trend followers segment with a growth rate of 7%

Luxury trend followers : 7%

School children : 1%

University students : 5%

Outdoor enthusiasts : 5%

Urban Commuters : 3%

Now- a quick question. Assume at the beginning of Year2, Becker Company has a credit (positive) balance in the AOCI account of $10800. Becker Company reports $653000 of net income for Year2. Becker has an unrealized gain of $12000 during Year2. The gain qualifies as OCI (Other comprehensive income). 1. What will Becker report as Accumulated Other Comprehensive Income on the Year2 balance sheet

Answers

Answer:

Becker Company

The amount that Becker will report as Accumulated Other Comprehensive Income on the Year 2 balance sheet is:

= $22,800.

Explanation:

a) Data and Calculations:

Year 2 Beginning balance:

Accumulated other comprehensive income (AOCI) = $10,800 credit

Year 2 reported net income = $653,000

Unrealized gain during Year 2 = $12,000

The Accumulated Other Comprehensive Income on the Year 2 balance sheet is:

Beginning balance $10,800

Unrealized gain        12,000

AOCI for Year 2 = $22,800

b) Becker's Accumulated Other Comprehensive Income includes unrealized gains and losses arising from some investments, pension plans, and hedging transactions.  These are usually reported in the equity section of the balance sheet and then netted off from the retained earnings.

g A construction company builds roads with machinery​ (capital, K) and labor​ (L). If we plot the isoquants for the production function so that labor is on the horizontal​ axis, then a point on the isoquant with a small MRTS​ (in absolute​ value) is associated with high​ __________ use and low​ __________ use. A. ​labor; capital B. ​concrete; gravel C. ​capital; labor D. None of the above.

Answers

Answer:

A. ​labor; capital

Explanation:

In the production function theory, here we presume that the isoquants should be convex shaped and the MRTS should be isoquant slop that should be downward as it is shifted from left to right. Now if it is along on the horizontal axis that goes towards right so here MRTS falls and the labor rises. Due to increased in labor, the capital should falls because of the negative slope

Therefore the option a is correct

The point on the isoquant with a small MRTS​ (in absolute​ value) is associated with high labor use and low capital use.

In a production function theory, we will presume that the isoquants should be convex shaped and the MRTS should be isoquant slop hence, should be downward as it is shifted from left to right.

if the MRTS is along on the horizontal axis that goes towards right, hence, the MRTS falls and the labor rises.

Hence, due to the increase in labor, the capital should falls because of the negative slope.

Therefore, the Option A is correct since the point on the isoquant with a small MRTS​ (in absolute​ value) is associated with high labor use and low capital use.

Read more about production function theory

brainly.com/question/17247385

If the ABC Company has three lots of products for sale, purchase 1 (earliest) for $20, purchase 2 (middle) for $15 and purchase 3 (latest) for $25, which cost would be assumed to be sold first using FIFO costing

Answers

Answer:

Results are below.

Explanation:

Giving the following information:

Purchase 1 (earliest) for $20

Purchase 2 (middle) for $15

Purchase 3 (latest) for $25

The FIFO (first-in, first-out) method, allocates costs to the cost of goods sold using the purchase price of the firsts units incorporated into inventory. On the contrary, the ending inventory cost is calculated with the costs of the lasts units incorporated.

Assume that the company sells the number of units equivalent to the first lot. Then, the cost of goods sold will be $20; and the ending inventory $40 (15+25).

Firm A has a 21 percent marginal tax rate, and Firm Z has a 28 percent marginal tax rate. Firm A owns a controlling interest in Firm Z. The owners of Firm A decide to incur a $9,500 deductible expense that will benefit both firms.

Required:
Compute the after-tax cost of the expense assuming that:
a. Firm A incurs the expense
b. Firm Z incurs the expense

Answers

Answer:

a. $7,505

b.$6,840

Explanation:

a. Computation for the after-tax cost of the expense assuming that Firm A incurs the expense

Using this formula

After-tax cost = Deductible Expense - (Firm A Marginal tax rate* Deductible Expense)

Let plug in the formula

After-tax cost = ($9,500 - ($21%*9500)

After-tax cost = ($9,500 - $1,995)

After-tax cost=$7,505

Therefore the after-tax cost of the expense assuming that Firm A incurs the expense is $7,505

B. Computation for the after-tax cost of the expense assuming that Firm Z incurs the expense

Using this formula

After-tax cost = Deductible Expense - (Firm Z Marginal tax rate*Deductible Expense)

Let plug in the formula

After-tax cost =$9,500 -(28%*$9500)

After-tax cost =($9,500 - $2,660 )

After-tax cost=$6,840

Therefore the after-tax cost of the expense assuming that Firm Z incurs the expense is $6,840

Sammy Co. uses process costing to account for the production of popcorn. Direct materials are added at the beginning of the process and conversion costs are incurred uniformly throughout the process. Equivalent units have been calculated to be 20,000 units for materials and 18,200 units for conversion costs. Beginning inventory consisted of $6,200 in materials and $4,400 in conversion costs. May costs were $47,000 for materials and $32,000 for conversion costs. Ending inventory still in process was 4,000 units (100% complete for materials, 55% for conversion). The cost per equivalent unit for conversion costs using the weighted average method would be:

Answers

Answer:

$2.00

Explanation:

Calculation to determine what The cost per equivalent unit for conversion costs using the weighted average method would be:

Using this formula

Cost per equivalent unit for conversion costs=Beginning inventory for conversion costs +May costs for conversion)/Equivalent units for conversion costs

Let plug in the formula

Cost per equivalent unit for conversion = ($4,400 + $32,000)/18,200

Cost per equivalent unit for conversion =$36,400/18,200

Cost per equivalent unit for conversion = $2.00

Therefore The cost per equivalent unit for conversion costs using the weighted average method would be:$2.00

Halsted Corp. has identified three cost pools in its manufacturing process: equipment maintenance, setups, and quality control. Total cost assigned to the three pools is $214,500, $101,400, and $153,000, respectively. Cost driver estimates for the pools are 10,000 machine hours, 150 setups, and 450 quality inspections, respectively.

Required:
Calculate the activity rate for each of Halsted's cost pools.

Answers

Answer:

Maintenance $21.45 per Machine Hour

Setup $676 per Setup

Quality Control $340 per Inspection

Explanation:

Calculation to determine the activity rate for each of Halsted's cost pools.

Activity rate for MAINTENANCE COST

Using this formula

Activity rate= Total maintenance cost / Total machine hours

Let plug in the morning

Activity rate=$214,500/ 10,000

Activity rate= $21.45 per Machine Hour

Activity rate for SETUPS

Using this formula

Activity rate= Total Setups /Setups

Let plug in the formula

Activity rate= $101,400/150

Activity rate=$676 per Setup

Activity rate for QUALITY CONTROL

Using this formula

Activity rate= Total Quality control /Quality inspections

Let plug in the formula

Activity rate= $153,000/450

Activity rate= $340 per Inspection

Therefore the activity rate for each of Halsted's cost pools will be:

Maintenance $21.45 per Machine Hour

Setup $676 per Setup

Quality Control $340 per Inspection

Bialy Company had the following information: Total sales $120,000 Total variable cost 48,000 Operating income 12,000 What is the breakeven sales revenue

Answers

Answer:

$100,000

Explanation:

The breakeven sales revenue is the annual fixed cost divided by the contribution margin ratio of the product, which is the amount of sales revenue that the Bialy company needs to achieve in order to make a zero profit.

operating income=sales revenue-variable cost-fixed cost

operating income=$12,000

sales revenue=$120,0000

variable cost=$48,000

fixed cost=unknown

$12,000=$120,000-$48,000-fixed cost

fixed cost=$120,000-$48,000-$12,000

fixed cost=$60,000

total contribution=sales revenue-variable cost

total contribution=$120,000-$48,000

total contribution=$72,000

contribution margin ratio=total contribution margin/sales revenue

contribution margin ratio=$72,000/$120,000

contribution margin ratio=60%

breakeven sales revenue=$60,000/60%

breakeven sales revenue=$100,000

Concord Company has recently tried to improve its analysis for its manufacturing process. Units started into production equaled 18900 and ending work in process equaled 1000 units. Concord had no beginning work in process inventory. Conversion costs are applied uniformly throughout production, and all materials are applied at the beginning of the process. How much is the materials cost per unit if ending work in process was 30% complete and total materials costs equaled $86940

Answers

Answer:

the material cost per unit is $4.60 per unit

Explanation:

The computation of the material cost per unit is shown below:

= Total material cost ÷ equivalent units of material

= $86,940 ÷ (18,900 - 1,000) × 100% + 1,000 × 100%

= $86,940 ÷ (17,900 + 1,000)

= $86,940 ÷ 18,900

= $4.60 per unit

Hence, the material cost per unit is $4.60 per unit

The same should be considered and relevant

Good afternoon. Kindly assist on the following please. Assignment due by 4:30pm Mike bookshop had the following structure. Share capital 500000 ordinary shares of $1 each. 300000 10% preference of $1 each. Reserves Share premium 200 000 General reserves 100 000 Retained earnings 400 000 8% debenture 100 000 During the year the following transaction took place. 01 January issue of 200 000 $1 ordinary shares at$1,20 and 100 000 preference shares at $2 each. 01 June a 1 for 4 right issue at a premium of $0,10c each per share. 01 December 1 for 5 bonus shares fully paid. All shares issued during the year qualified for bonus and the company wishes to leave the reserves in their flexible form. Required. Balance sheet extract.​

Answers

Answer:

Mike Bookshop

Balance Sheet Extract as at December 31

Share capital:

1,050,000 ordinary shares of $1 each    $1,050,000

400,000 10% preference of $1 each           400,000

Total share capital                                   $1,450,000

Reserves:

Share premium                                            357,500

General reserves                                         100,000

Retained earnings                                      225,000

Total reserves                                          $682,500

8% debenture                                           $100,000

Explanation:

a) Data and Analysis:

Share capital:

500000 ordinary shares of $1 each.

300000 10% preference of $1 each.

Reserves:

Share premium 200 000

General reserves 100 000

Retained earnings 400 000

8% debenture 100 000

During the year the following transaction took place.

01 January Cash $240,000 Ordinary share capital $200 000 Share Premium $40,000

$1 ordinary shares at$1.20 and

01 January Cash $200,000 Preferred share capital $100 000 Share Premium $100,000

01 June Cash $192,500 Ordinary share capital $175,000 Share Premium $17,500

a 1 for 4 right issue at a premium of $0.10c each per share.

01 December Retained Earnings $175,000 Ordinary share capital $175,000

1 for 5 bonus shares fully paid.

Ordinary share capital:

Beginning balance         $500,000

January 1 issue                 200,000

June 1 rights issue            175,000

Dec. 1 bonus issue            175,000

Ending balance           $1,050,000  

Preferred share capital:

Beginning balance          $300,000

January 1 issue                  100,000

Ending balance              $400,000

Share Premium:

Beginning balance        $200,000

January 1 issues               140,000

June 1 rights issue             17,500

Ending balance            $357,500

General reserves         $100,000

Retained Earnings:

Beginning balance      $400,000

Dec. 1 Bonus issue        (175,000)

Ending balance          $225,000

Local marketing is an effective tool used by marketers to reach intended market segments. Groupon has capitalized on this concept by tailoring brands and marketing to the needs and wants of local customer segments—cities, neighborhoods, and even specific stores. According to its website, Groupon “offers a vast mobile and online marketplace where people discover and save on amazing things to do, see, eat, and buy. By enabling real time commerce across local businesses, travel destinations, consumer products, and live events, shoppers can find the best a city has to offer. Groupon is redefining how small businesses attract and retain customers by providing them with customizable and scalable marketing tools and services to profitably grow their businesses.” This concept lies at the heart of Groupon’s mission: “to connect local commerce, increasing consumer buying power while driving more business to local merchants through price and discovery.” To help consumers make those connections, Groupon offers a mobile app, online marketplace, and social media touchpoints where customers can readily access information on its daily deals. Questions: Q1. How does Groupon use target marketing? Provide examples. Q2. Discuss the ways in which small businesses can utilize local social media marketing in your community. Q3. Have you heard about Groupon? Explain their business Q4. Do you use Groupon? Q5. Is it effective in helping local businesses to meet the challenges of local marketing? Why or why not?

Answers

Answer:

hdhwhhdndnjsjndbxhhdhshhshxhx

Other Questions
After draining 8 gallons from a tub of water, there were still 12 gallons leftHow many gallons of water were in the tub to start? Why did the people of Jericho build a wall around their city? A group of 49 randomly selected students has a mean age of 22.4 years with a standarddeviation of 3.8. Construct a 98% confidence interval for the population mean knowing thatthe population standard deviation is 4.2 years. Draw the graph of y +5=0 for two and 3 variables 4cos^4(x) 5cos^2(x) + 1 = 0 from [0, 2) please show steps!! The length of a rectangle is 2 centimeters less than three times its width. Its area is 21 square centimeters. Find the dimensions of the rectangle. Use the formula, area=length*width. Select the correct location in the expression.Consider this expression.4x^4-6x^3+6x+3/x-3Which term in the quotient of this expression contains an error? 1. Why are scientists often uncomfortable with the term, "facts"? ALGUIEN QUE SEPA CLASIFICACIN ORDENACIN Y DESCRIPCIN DE SERIES, SUBSERIES Y EXPEDIENTES Pls if anyone knows the answer that will be greatly appreciated :) Standing your ground is primarily about protecting an individual from criminals chargers. What the correct answer question true or false Explain how you could find the shortest distance from A(6, 5) to the line y = 5x 10. (Use a diagram, be specific, and list all your steps. What does Poe use in the passage to create a sense of doom,as if reality is pounding on the narrator? La iluminacin de la superficie de un patio amplio es 1600 lx cuando el ngulo de elevacin del sol 53. Calcular la iluminacin cuando el ngulo de elevacin del Sol sea 37 If 16 grams of O2 react with excess C2H6, how many grams of CO2 will be formed? The formula mass of O2 = 32 amu and the formula mass of CO2 = 44amu. The balanced chemical equation is 2 C2H6(g) + 7 O2(g) 4 CO2(g) + 6 H2O(g) what is the sum of the first 5 terms of a geometric series with a sub 1 = 10 and r = 1/5? HELP PLEASE HURRYTHANKS The sequence below is arithmetic:{3, -6, -15, -24}TRUE OR FALSE During 2021, Raines Umbrella Corporation had sales of $772,000. Cost of goods sold, administrative and selling expenses, and depreciation expenses were $465,000, $104,500, and $150,000, respectively. In addition, the company had an interest expense of $74,400 and a tax rate of 25 percent. (Ignore any tax loss carryforward provisions and assume interest expense is fully deductible). Suppose Raines Umbrella Corp. paid out $102,000 in cash dividends. Is this possible? If spending on net fixed assets and net working capital was zero, and if no new stock was issued during the year, what is the net new long-term debt? What made the U-2 Spy Planes initially very effective?