Answer:
O begins to boil
Explanation:
When the vapor pressure of a liquid is equal to the atmospheric pressure, the liquid suddenly begins to boil.
At this point the boiling point of the liquid has been reached. Further addition of heat energy will cause the liquid to boil vigorously Subsequently evaporation will start from the surface of the boiling liquid.The atmospheric pressure is the ambient pressure measured with the respect to the sea level pressure.Answer:
has no observable changes
Explanation:
A solution is oversaturated,Which could be done to decrease the oversaturation?
dilute the solution
add more solute
cool the solution
add a different solute
A solution is oversaturated,Which could be done to decrease the oversaturation?
dilute the solution
add more solute
cool the solution
add a different solute
Answer:
AAAAAAAAAAAAA i just finished the exam
Explanation:
PLEASE HELP ADAP I WILL MARK AS BRAINLYEST
Answer:
c! Hope this helps!
Explanation:
BRAINLIEST PLZ ;)
Answer:
I think its the third one im not sure tho
Explanation:
Two cars travel next to each other. One speedometer reads
20 meters per second and the other reads 72 kilometers per
hour. If arrows represent speed, which pair of arrows
represents the relationship of speeds of these two cars?
The blue arrow is always the 20 meters per second car.
PLEASE HELP
Answer:
The pair of arrows which represents the relationship of speeds of the two cars is;
The second option as shown in the attached drawing
Explanation:
The given parameters are;
The reading on the speedometer of one car = 20 m/s
The reading on the speedometer of the other car = 72 km/h = 20 m/s
The blue arrow = 20 m/s
Therefore, given that the speeds of both cars are equal (20 m/s = 72 km/h = 20 m/s), the pair of arrows that represent the relationship of speeds of the two cars is two equal length blue arrows which is the second option
The attached diagram showing the pair of arrows that represents the relationship of speeds of the two cars is drawn using Microsoft Visio.
84 pt =_____ qt
5.0 gal =_____ L
Answer:
84 pt =__50.4399___ qt
5.0 gal =___18.9271__ L
Explanation:
Have A Wonderful Day!!
Answer: 84 pints = 42 quarts
5.9 gallons = 1.89271
Explanation:
Fluorine gas reacts violently with water to produce hydrogen fluoride and ozone according to the following unbalanced equation. How many moles of o, are created assuming STP conditions are in effect, given 1.88 moles of fluorine gas were
used?
__F2+__H20—__HF+__03
Answer:
Fluorine gas reacts violently with water to produce hydrogen fluoride and ozone according to the following unbalanced equation. How many moles of o, are created assuming STP conditions are in effect, given
Explanation:
3
PLZ ANSWER IN THE NEXT 24 HOURS MANY POINTS!!!!!!!!
You have found a new element with the atomic mass of 119. In a paragraph explain where you would put in on the periodic table and why you would put it there. What type of properties would this element have? What would you call it?
Answer:
Ununennium.
Explanation:
Ununennium, also known as eka-francium or element 119, is the hypothetical chemical element with symbol Uue and atomic number 119. It's Mass number is [315] (predicted), as we as it is existing on the periodic table hence its symbol: Uue
Answer B
Explanation:
hereI wpould put it on t
Which set of the below elements are in the same period.
1. Li, Be, C, O
2. H, Li, Be
3. F, CI, Br, I
4. H, He, Li, Be
1
Explanation:
because they period two
Answer:
1
Explanation:
What happens to a cell when it's in different environments?
What is an empirical formula
An empirical shows the simplest ratio among atoms in a compound .
More informationan empirical formula is the simplest formula for a compound .For example, H2O2 can be reduced to a simpler formula. Determining a Molecular Formula from an Empirical Formula The empirical formula for a compound is P 2 O 5 . Its experimental molar mass is 284 g/mol.For example, the empirical formula of benzene (C5H5) is Qj, - because the mole ratio of carbon am'hydrogen is 1:1.3. A chemical reaction produces 3.81g potassium chloride (KCI). How many formula units of potassium chloride are there?* Find molar mass of KCI* Answer:__3.08 E 22 formula units of KCI
Answer:
3.81 [tex]\frac{1}{74.55}[/tex] X [tex]\frac{6.02*10^{23} }{1}[/tex] = 3.08 X 10^22
Explanation:
74.55 is the mass
8SnCl4
How many atoms
Answer:
i think i like 14 or 8 atom
Explanation:
some students using Apple to represent the Earth what is the best reason to use an Apple for this comparison?
Answer:
The skin of the apple is very thin, and the crust of the Earth is very thin.
does mitosis begin with a diploid cell?
Answer:
no
Explanation:
Plss answer the question in the picture. If you actually answer I will give you brainilest!!!
Answer:
hey :)
your answer is D.
Explanation:
To find density, you must divide mass and volume.
8 divided by 4 is 2
6 divided by 6 is 0
4 divided by 2 is 2
hope i helped any :))
The downward movement of water through pores and other spaces in soil due to gravity is called____
A Iniltration
B evaporation
C soakation
D seepage
Answer:
A Infiltration
Explanation:
The downward movement of water through pore spaces and other spaces in soil due to gravity is called infiltration.
Infiltration is greatly due to the force of gravity forcing water through pore spaces downward.
The ground water recharge is also impacted by this downward motion of water. In areas where the surface of the soil is covered with concrete, infiltration is not possible. Soil water content is due to the movement of water by infiltration.Identify the formula for ammonium nitrate
(NH4)3NO3
NH4(NO2)2
NH4NO2
Answer:
NH₄NO₃
Explanation:
In salt naming, the cation is named first, then you must put the name of the anion. In the same way when you are writting the formula. Also, the global charge of a salt is always 0.
Thus, we must write each ion and its charge:
Ammonium: NH₄⁺
Nitrate: NO₃⁻
As both ions have the same charge, the formula is:
NH₄NO₃The cation first and then the anion.
Pls help me use the graph to answer the questions
Answer:
The first question is option 2
and the second question in option 1
Explanation:
How can I determine basic oxide from peroxide by looking
what are alkenes and there chemical property
Answer:
Alkenes contain a double bond that is composed of one sigma and one pi bond between two carbon atoms. The sigma bond has similar properties to those found in alkanes , while the pi bond is more reactive. The carbon atoms in the double bond are sp² hybridized , forming a planar structure.
Explanation:
Believe it!!!
how many grams is 5.16 mol br2?
Answer:
Mass = 824.57 g
Explanation:
Given data:
Mass of bromine = ?
Number of moles of bromine = 5.16 mol
Solution:
Formula:
Mass = number of moles × molar mass
Molar mass of bromine = 159.8 g/mol
by putting values,
Mass = 5.16 mol × 159.8 g/mol
Mass = 824.57 g
In some areas of Texas, rainfall quickly soaks through layers of porous rock and is stored naturally underground. The water is then pumped into homes for people to use. What would have the greatest impact on the amount of water available for people in this area?
Explanation:
The amount of rainfall would have the greatest impact on the amount of water available for people in this area. The more the rainfall the more water soaks through layers of porous rocks.Hence, level of water table will remain sufficient for easy pumping of water to the homes.Texas receives plenty of rainfall in a year.In a single year the region can receive up to 48 inches (1,200 mm) of precipitation, and flooding is common near rivers and in low-lying areas. Therefore water table remains intact throughout the year.
What type of chemical reaction does this represent.
Answer:
combustion
Explanation:
your welcome :)
What is the definition of momentum?
A- The amount of matter in an object.
B-Mass in motion.
C-Speed with direction.
D- The resistance to change motion
Answer:
B. Mass in motion. Is the definition of momentum
HELP PLEASE!!!
How are both stability and change seen in properties of elements?
Answer:
In both natural and built systems, stability and change are an important focus of study for both scientists and engineers. Stability refers to a system that is unchanging. ... A dynamic equilibrium exists when chemical reactions or physical movements occur at rates that balance out, creating no net change in a system.
Answer:
In both natural and built systems, stability and change are an important focus of study for both scientists and engineers. Stability refers to a system that is unchanging. ... A dynamic equilibrium exists when chemical reactions or physical movements occur at rates that balance out, creating no net change in a system.
Explanation:
Item 17 Which symbol represents a salt? C2H2 C6H12O6 KCl O2 Item 17 Which symbol represents a salt? C2H2 C6H12O6 KCl O2
Answer:
The symbol that represent a salt is CaCl2
Explanation:
The CaCI2 is the calcium chloride that an organic compound now a salt having a chemical formula i.e. CaCI2. Also it is non-color cyrstalline solid at the room temperature also it is highly soluble in the water
Therefore as per the given situation the symbol that represent a salt is CaCI2
This is the answer and the same is not provided in the given options
PUN
Which of the following is an example of a Response to Change? (Read carefully, the other three are Adaptations)
(A)Thoms and Spikes as a protective mechanism
(B)Polar Bears transparent fur and black skin
(C)Plants turning toward the light
(D)Frogs webbed feet
Identify this parasitic organism.
Answer:
Schistosoma or blood fluke
Explanation:
Parasitic organisms are defined as the organisms that depends on other organisms body called host for their nutrition and harm the host body.
The given image is of Schistosoma that is commonly known as blood flukes. Schistosoma are flatworms which causes group of infections in humans known as schistosomiasis. Schistosoma is a water-borne parasite and found in veins near the human intestine.
Hence, the correct answer is "Schistosoma or blood fluke".
Write the following numbers in scientific notation: a) 0.0006730 b)50000.0 c)0.000003010 d) 132.40 e)2232
Answer:
a)6.730×10⁻⁴
b)5×10⁴
c)3.010×10⁻⁶
d)1.3240×10²
e)2.232×10³
The given numbers in scientific notation are [tex]6.730 \times 10^{-4}[/tex], [tex]5.0 \times 10^4[/tex], [tex]1.3240 \times 10^2[/tex], [tex]2.232 \times 10^3[/tex] and [tex]2.232 \times 10^3[/tex], respectively.
Scientific notation is a way of expressing very large or very small numbers in a compact and convenient form.
To express a number in scientific notation, we need to write the number in the form: [tex]\rm a\times 10^b[/tex]
a) 0.0006730 can be written in scientific notation as [tex]6.730 \times 10^{-4}[/tex]. The decimal point was moved 4 places to the right, so the exponent is negative 4.
b) 50000.0 can be written in scientific notation as [tex]5.0 \times 10^4[/tex]. The decimal point was moved 4 places to the left, so the exponent is positive 4.
c) 0.000003010 can be written in scientific notation as [tex]3.010 \times 10^{-6}[/tex]. The decimal point was moved 6 places to the right, so the exponent is negative 6.
d) 132.40 can be written in scientific notation as [tex]1.3240 \times 10^2[/tex]. The decimal point was moved 2 places to the left, so the exponent is positive 2.
e) 2232 can be written in scientific notation as [tex]2.232 \times 10^3[/tex]. The decimal point was moved 3 places to the left, so the exponent is positive 3.
Therefore, [tex]6.730 \times 10^{-4}[/tex], [tex]5.0 \times 10^4[/tex], [tex]1.3240 \times 10^2[/tex], [tex]2.232 \times 10^3[/tex] and [tex]2.232 \times 10^3[/tex], are the scientific notation for the given numbers.
Learn more about Scientific notation here:
https://brainly.com/question/19625319
#SPJ6
B
1. magnesium hydroxide + sulfuric acid sulfate +————
2. calcium hydroxide + hydrochloric acid calcium
+ water+————
3. lead hydroxide + nitric acid lead nitrate +————-
4. sodium hydroxide + sulfuric acid
+ water————-
5. potassium hydroxide + citric acid potassium
+ water————-
6. silver hydroxide + hydrochloric acid chloride +———
7. aluminium hydroxide + phosphoric acid———-
Answer: 1. magnesium hydroxide + sulfuric acid = magnesium sulphate + water
2. calcium hydroxide + hydrochloric acid = calcium chloride + water
3. lead hydroxide + nitric acid = lead nitrate + water
4. sodium hydroxide + sulfuric acid = sodium sulphate + water
5. potassium hydroxide + citric acid = potassium citrate + water
6. silver hydroxide + hydrochloric acid = silver chloride + water
7. aluminium hydroxide + phosphoric acid = aluminium phosphate + water
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
The balanced chemical equations are :
1. magnesium hydroxide + sulfuric acid = magnesium sulphate + water
[tex]Mg(OH)_2(aq)+H_2SO_4(aq)\rightarrow MgSO_4(aq)+2H_2O(l)[/tex]
2. calcium hydroxide + hydrochloric acid = calcium chloride + water
[tex]Ca(OH)_2(aq)+2HCl(aq)\rightarrow CaCl_2(aq)+2H_2O(l)[/tex]
3. lead hydroxide + nitric acid = lead nitrate + water
[tex]Pb(OH)_2(aq)+2HNO_3(aq)\rightarrow Pb(NO_3)_2(aq)+2H_2O(aq)[/tex]
4. sodium hydroxide + sulfuric acid = sodium sulphate + water
[tex]NaOH(aq)+H_2SO_4(aq)\rightarrow Na_2SO_4(aq)+H_2O(l)[/tex]
5. potassium hydroxide + citric acid = potassium citrate + water
[tex]KOH(aq)+C_6H_8O_7(aq)\rightarrow C_6H_7O_7K(aq)+H_2O(l)[/tex]
6. silver hydroxide + hydrochloric acid = silver chloride + water
[tex]AgOH(aq)+HCl(aq)\rightarrow AgCl(s)+H_2O(l)[/tex]
7. aluminium hydroxide + phosphoric acid = aluminium phosphate + water
[tex]Al(OH)_3(aq)+H_3PO_4(aq)\rightarrow AlPO_4(aq)+3H_2O(l)[/tex]
Answer:
. magnesium hydroxide + sulfuric acid = magnesium sulphate + water
2. calcium hydroxide + hydrochloric acid = calcium chloride + water
3. lead hydroxide + nitric acid = lead nitrate + water
4. sodium hydroxide + sulfuric acid = sodium sulphate + water
5. potassium hydroxide + citric acid = potassium citrate + water
6. silver hydroxide + hydrochloric acid = silver chloride + water
7. aluminium hydroxide + phosphoric acid = aluminium phosphate + water
Explanation:
is the answer llllllll
What is the cation and anion for Aluminum chloride
Answer:
For, Aluminum chloride, aluminum = AL+ so here aluminum is the cation
But Chloride is the anion = CL -
So cation is positive and anion is negative