The best option for dissolving PbBr₂ is option (2)
2) Add a solution of NaBr
The reason for choosing the above option is as follows;
Lead (II) bromide is an inorganic powdery substance that has a solubility in water of 0.973 g/100 mL at 20°C. It is insoluble in alcohol but is soluble in alkali, ammonia, NaBr, and KBr.
PbBr₂ is slightly soluble in ammonia, and it reacts with NaOH to produce Pb(OH)₂ and NaBr.
Taking the solubility product of PbBr₂ as [tex]K_{sp}[/tex] = 6.60 × 10⁻⁶, in a solution of 0.5 M NaBr, we have;
PbBr₂ → Pb⁺ + 2Br⁻
[tex]K_{sp}[/tex] = [Pb]·[2Br]²
Therefore, we get;
6.60 × 10⁻⁶ = [x]·[0.5]²
Where;
x = The number of moles of lead, Pb, in per liter of solution
∴ x = (6.60 × 10⁻⁶)/[(0.5 )²] = 2.64 × 10⁻⁵.
The molar solubility of PbBr₂ per liter of NaBr, x = 2.64 × 10⁻⁵ mol/L
PbBr₂ is more soluble in NaBr.
Given that ammonium ion NH₄Br in water gives similar products to ammonia, NH₃, it is expected to be more suitable to dissolve PbBr₂ in NaBr.
Therefore, the best solution for dissolving PbBr₂(s) is NaBr, the correct option is option (2) add a solution of NaBr.
Learn more about solubility product here;
https://brainly.com/question/14300821
For a gas sample containing equimolar amounts of carbon monoxideand heliumat 300 K, heliumhas _____________average speed and _____________ average kinetic energy compared tocarbon monoxidegas.a.a lower; the same b. the same; the same c. a higher; the same d. a higher; higher
Answer:
Option C (a higher; the same) is the appropriate response.
Explanation:
Given:
Temperature,
T = 300 K (both [tex]N_2[/tex] and [tex]H_2[/tex])
As we know,
Average speed of a molecule,
⇒ [tex]\bar v=\sqrt{\frac{8RT}{\pi M} }[/tex]
Thus, the average speed of [tex]N_2[/tex] will be lower as its molar mass is greater than [tex]H_2[/tex].
Now,
⇒ [tex]Average \ kinetic \ energy = \frac{3}{2} \ KT[/tex] (not depend on molar mass)
Hence, it will be the same.
The other three alternatives aren't connected to the scenario given. So the above is the correct answer.
The reversible reaction: 2SO2(g) O2(g) darrow-tn.gif 2SO3(g) has come to equilibrium in a vessel of specific volume at a given temperature. Before the reaction began, the concentrations of the reactants were 0.060 mol/L of SO2 and 0.050 mol/L of O2. After equilibrium is reached, the concentration of SO3 is 0.040 mol/L. What is the equilibrium concentration of O2
Answer:
[tex][O_2]_{eq}=0.030M[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to solve this problem by firstly writing out the mathematical expression for the concentration of oxygen at equilibrium, given the initial one and the change due to the reaction extent:
[tex][O_2]_{eq}=0.050M-x[/tex]
Whereas [tex]x[/tex] can be found considering the equilibrium of SO3:
[tex][SO_3]_{eq}=2x=0.040M[/tex]
Which means:
[tex]x=\frac{0.040M}{2} =0.020M[/tex]
Thus, the equilibrium concentration of oxygen gas turns out:
[tex][O_2]_{eq}=0.050M-0.020M=0.030M[/tex]
Regards!
What is the major product in this reaction
Answer:
I think option A is right answer
2, classify the following molecules as polar or non polar.
A,CH4 B,CHcl C,Co2 D,H2O2 E,BCl3 F,H2S
A. CH4= NON POLAR
B. CH3cl= POLAR
C. CO2= NON POLAR
D. H2O2= POLAR
E. BCl3= NON POLAR
F. H2S= SLIGHTLY POLAR
Poly(ethylene terephthalate) (PET), which has glass transition (Tg) and crystalline melting (Tm) temperature of 69 and 267 °C, respectively, can exist in a number of different states depending upon temperature and thermal history. Thus, it is possible to prepare materials that are semicrystalline with amorphous regions that are either glassy or rubbery and amorphous materials that are glassy, rubbery or melts. Consider a sample of PET cooled rapidly from 300 °C (state A) to room temperature. The resulting material is rigid and perfectly transparent (state B). The sample is then heated to 100 °C and maintained at this temperature, during which time is gradually becomes translucent (state C). It is then cooled to room temperature, where it is again observed to be translucent (state D).
Answer:
Following are the solution to the given points:
Explanation:
For point A:
The sample cooking (PET) is between 300°C and room temperature.Now in nature, the substance is exceedingly stiff.Samples of PET up to 100°C were heated and stayed on equal footing.Now it has cooled off the same sample below 100° C and we may see how it is again TRASNEPARENT in nature.For point B:
In point 3, the mixture was added to 100°C, which implies that the granular material flows and deforms, enabling it to become elongated. This is termed solid-state crystalline such that grains are flexible, but this material contaminates numerous little crystalline that has spheres when we cool down in point 4 polymers. It forms therefore an unstructured solid, which then in point 4 is higher in particles and less pliable in orderly atoms.
For point C:
In point 2, the specimen gets forced at room temperature to organize a huge molecule in an ordinary and crystal fashion and therefore is transparent due to highly crystalline atoms in point 2 of the PET sample.
In point 4, however, we notice how amorphous, firm but not crystalline develops. It's why light tends to disperse over many cereal limits, since many microscopic crystallines, therefore dispersion, PET in point 4 is translucent.
Which of these are characteristics of good experimental design
A sample of oxygen gas has a volume of 89.6 L at STP. How many moles of oxygen gas are present ?
Answer:
89,6/22,4 =4(mol)
Explanation:
There are approximately 1.089 moles of oxygen gas present in the sample at STP.
At STP (Standard Temperature and Pressure), the conditions are defined as follows:
Temperature (T) = 0 degrees Celsius = 273.15 Kelvin
Pressure (P) = 1 atmosphere (atm) = 101.325 kPa = 1013.25 hPa
Now, to find the number of moles of oxygen gas (O2) present in the sample, we can use the ideal gas law:
PV = nRT
Where:
P = pressure (in atm)
V = volume (in liters)
n = number of moles
R = ideal gas constant = 0.0821 L.atm/(mol.K)
T = temperature (in Kelvin)
Given:
V = 89.6 L (volume at STP)
T = 273.15 K (STP temperature)
Let's plug in the values and solve for n (number of moles):
n = PV / RT
n = (1 atm) × (89.6 L) / (0.0821 L.atm/(mol.K) × 273.15 K)
n = 1.089 moles
So, there are approximately 1.089 moles of oxygen gas present in the sample at STP.
To know more about oxygen gas:
https://brainly.com/question/31842859
#SPJ2
_________one moleculetwo moleculesone moletwo moles of H2(g) reacts with _________one moleculetwo moleculesone moletwo moles of F2(g) to form _________one moleculetwo moleculesone moletwo moles of HF(g).
Answer:
The reaction between hydrogen and fluorine.
Explanation:
The balanced chemical equation of the reaction is:
[tex]H_2(g)+F_2(g)->2HF(g)[/tex]
From the balanced chemical equation, it is clear that:
1 mole of [tex]H_2[/tex] gas reacts with one mole of [tex]F_2(g)[/tex] and forms 2 moles of HF(g).
states two properties a solute need to satisfy to be responsible for the colligative properties?
Answer:
the properties are:
vapor pressure loweringosmotic pressurefreezing point depressionboiling point elevationthese are all the properties but I think the two a solute needs to satisfy are
boiling point elevationvapor pressure loweringI hope this helps
it takes 513 kj to remove a mole of electrons from the atoms at the surface of a piece of metal. how much energy does it take to remove a single electron from n atom at the surface of the metal
Answer:
The right solution is "[tex]8.5\times 10^{-19} \ joule[/tex]".
Explanation:
As we know,
1 mole electron = [tex]6.023\times 10^{23} \ no. \ of \ electrons[/tex]
Total energy = [tex]513 \ KJ[/tex]
= [tex]513\times 1000 \ joule[/tex]
For single electron,
The amount of energy will be:
= [tex]\frac{513\times 1000}{(6.023\times 10^{23})}[/tex]
= [tex]8.5\times 10^{-19} \ joule[/tex]
What is true about the properties of liquids and gases?
Gas particles are much more densely packed than liquid particles.
The crystal lattice structure of liquids is more defined than in gases.
Liquids form amorphous crystals while gases do not.
There are strong intermolecular forces between particles that make up liquids, but not gases.
Answer:
There are strong intermolecular forces between particles that make up liquids, but not gases.
Explanation:
Solids, liquids and gases are the three states of matter that exists. However, they possess varying properties that distinguishes them from one another. One of these properties is the strength of the intermolecular forces that hold their molecules together.
The intermolecular forces of each state of matter becomes weak in this order: solid>liquid>gas.
- Intermolecular forces in solid molecules are very strong, hence making them compact and well attached to each other.
- Intermolecular forces in liquid molecules are not too strong, hence, cannot exist in a fixed position but tend to flow.
- Intermolecular forces in gaseous molecules are very weak, hence, gases can move easily and rapidly in any given space.
Use the following key to classify each of the elements below in its elemental form:
A. Discrete atoms .. C. Metallic lattice
B. Molecules ... D. Extended, three-dimensional network
1. Magnesium
2. Nitrogen ...
3. Lithium
4. Potassium ...
Answer:
Magnesium - Metallic lattice
Nitrogen - Molecules
Lithium - Metallic lattice
Potassium - Metallic lattice
Explanation:
Metals exist in metallic lattices. In this lattice, metal ions are held together with a sea of electrons by strong electrostatic forces.
All metals possess this metallic lattice, hence; potassium, lithium and magnesium all consist of metal lattices.
Nitrogen is a nonmetal and consists of molecules of N2.
What does a positive AH tell about a reaction?
A. The reaction is exothermic.
B. The reaction has heat as a product.
C. The reaction is endothermic.
D. The reaction has no activation energy.
Answer:
C
Explanation:
An endothermic reaction has a positive enthalpy change (∆H> 0).
An endothermic reaction is where the energy of the products is higher than that of the reactants.
∆H= energy of products -energy of reactants
Thus, ∆H is positive since the value of the energy of products is greater than that of the reactants.
Exothermic reactions have a negative ∆H.
In an endothermic reaction, heat is absorbed and thus if we were to include heat in teh chemical equation, it would be part of the reactants not products.
∆H does not indicate the amount of activation energy (Ea). All reactions have activation energy (exothermic and endothermic reactions). Activation energy is the minimum amount of energy required for the reaction to proceed.
Answer:
[tex]\boxed {\boxed {\sf C. \ The \ reaction \ is \ endothermic}}[/tex]
Explanation:
There are two main types of reactions classified according to heat: exothermic and endothermic.
Exothermic: heat is released from the system Endothermic: heat is absorbed into the systemThe ΔH is the change in enthalpy. It is the difference between the heat of the products and the reactants (ΔH = heat of products - heat of reactants). It helps us describe a system's change in heat and classify reactions as exothermic or endothermic.
Exothermic: the products have less energy because heat is released. The change in enthalpy or ΔH is negative.Endothermic: the products have more energy because heat is absorbed. The change in enthalpy or ΔH is positive.In this problem, the change in enthalpy is positive. The change in enthalpy doesn't refer to heat as a product or activation energy. Therefore, the reaction must be endothermic.
Classify the following as either solutions or colloids. If a colloid, name the type of colloid and identify both the dispersed and the dispersing phases.
a. glucose in water
b. smoke in air
c. carbon dioxide in air
d. milk
Answer:
a. glucose in water( solution)
b. smoke in air (colloids)
c. carbon dioxide in air (solution)
d. milk( colloids)
Explanation:
A solution is said to be formed when a solute dissolves in a solvent to form a homogeneous mixture. The solute particles are less than 10^-9m in size. Familiar solutions are those where the solute are dissolved in a liquid solvent. When the liquid water, the solution is known as an aqueous solution. A typical example is (glucose in water). In some other cases, the apparent solution of a solute in a solvent is accompanied by a chemical reaction and this is often known as a chemical reaction. A typical example is (carbon dioxide in air).
Colloids are also known as false solutions. Here, the individual solute particles are larger than the particles of the true solution, but not large enough to be seen by the naked eye. When a light beam is placed beside a beaker containing a colloid, the light rays of the beam can be clearly seen. This shows that it exhibits the Tyndall effect while a solution dosent exhibit such.
In a colloid, the liquid solvent is more appropriately know as the DISPERSION medium while the solid solute particles constitute the DISPERSED substance. This can either be solid, liquid or gas.
For example:
--> smoke in air : Dispersion medium is gas while the dispersed substance is solid.
--> milk: Dispersion medium is liquid while the dispersed substance is liquid.
An electrolysis reaction is
A)
exothermic.
B)
hydrophobic.
C)
spontaneous.
D)
non-spontaneous.
Answer:
the electrolysis reaction is a non- spontaneous reaction
Explanation:
Since electrons flow from it, the anode in an electrolytic cell is positive, while the cathode is negative when electrons flow into it. The device functions like a galvanic cell in that direction. In an electrolytic cell, an external voltage is applied and that is what causes a non spontaneous reaction
Identify the highest energy molecular process that occurs when a molecule absorbs a microwave photon.
The question is incomplete, the complete question is;
Identify the highest energy molecular process that occurs when a molecule absorbs a microwave photon
a) electronic excitation
b) bond breakage
c) molecular vibration
d) molecular rotation
Answer:
molecular rotation
Explanation:
Microwaves are part of the electromagnetic spectrum. They are lower energy, lower frequency radiation.
When molecules absorb infrared radiation, they transition between the rotational states of the molecule.
Hence, the highest energy molecular process that occurs when a molecule absorbs a microwave photon is molecular rotation.
A gas at 74°C is heated to 120°C so there is pressure reaches 1.79 ATM. What is its initial pressure?
Explanation:
here's the answer to your question
Determine whether the reaction will be spontaneous at high temperatures only, at low temperatures only, at all temperatures, or no temperatures. (HINT: Use your chemical sense and your real-world knowledge to predict the signs of delta Hrxn & delta Srxn)
4Fe(s) + 3O2(g) ----> 2Fe2O3(s) [rust]
Circle one:High T, Low T, All T, No T
Answer:
The rusting of iron is spontaneous at low temperatures.
Explanation:
The given chemical reaction is:
4Fe(s) + 3O2(g) ----> 2Fe2O3(s) [rust]
The rusting of iron is a chemical reaction in which iron reacts with oxygen in presence of moisture and forms iron oxide.
This reaction takes place in a faster rate when there is low temperatures in the atmosphere.
When temperature is low, the moisture in the atmosphere is more and hence, rate of rusting is more.
At 298 K, ∆H = -314 kJ/mol and ∆S = -0.372 kJ/(K•mol). What is the Gibbs free energy of the reaction?
Answer:
-203 kJ/mol
Explanation:
Step 1: Given data
Standard enthalpy of the reaction (ΔH°): -314 kJ/molStandard entropy of the reaction (ΔS°): -0.372 kJ/K.molAbsolute temperature (T): 298 KStep 2: Calculate the standard Gibbs free energy of the reaction (ΔG°)
We will use the following expression.
ΔG° = ΔH° - T × ΔS°
ΔG° = (-314 kJ/mol) - 298 K × (-0.372 kJ/K.mol) = -203 kJ/mol
By convention, when ΔG° < 0, the reaction is spontaneous.
Calculate percent yield when you start with 0.78 grams of camphor and end with 0.23 grams of iso/borneol. The molecular weight of camphor is 152.23 g/mol, and the molecular weight of iso/borneol is 154.25 g/mol.
Answer:
29.1%
Explanation:
First we convert 0.78 g of camphor to moles, using its molar mass:
0.78 g ÷ 152.23 g/mol = 0.00512 mol camphorThen we convert 0.23 g of isoborneol to moles, using its molar mass:
0.23 g ÷ 154.25 g/mol = 0.00149 mol isoborneolFinally we calculate the percent yield:
0.00149 mol / 0.00512 mol * 100% = 29.1%dentify the correct formula for the following ionic compounds. - sodium chloride - magnesium chloride - calcium oxide - lithium phosphide - aluminum sulfide - calcium nitride A. SCl B. LiP 3 C. AlS D. Li 3P E. CaN F. CaO G. Ca 3N 2 H. MgCl 2 I. NaCl J. CaO 2 K. CaN 2 L. LiP M. MnCl 2 N. Al 2S 3 O. AlS 3
Explanation:
The chemical formula of an ionic compound can be written by using the symbols of the respective cations and anions.
The overall charge on the molecule should be zero.
Hence, the total charge of cations=total charge of anions.
The symbols of the given molecules are shown below:
sodium chloride ---- NaCl
magnesium chloride ---[tex]MgCl_2[/tex]
calcium oxide ---- CaO
lithium phosphide----[tex]Li_3P[/tex]
aluminum sulfide ----- [tex]Al_2S_3[/tex]
calcium nitride---- [tex]Ca_3N_2[/tex]
Two substances (A and B) are placed at each end of a glass tube. The vapors of the substances form a solid that is closer to substance
A's end than to substance B's end.
Which conclusion will be made?
O Substance A has a greater molecular mass than substance B.
Substance B has a greater molecular mass than substance A.
The molecular masses of both substances are the same.
Answer:
Substance A has a greater molecular mass than substance B
Explanation:
The greater the mass of a substance, the slower it will travel. If the solid formed closer to substance A, it means that substance A, travelled less and that it was slower, meaning it had a greater molecular mass.
Please mark it as brainliest if it helped you
Answer:
thank you... I would say is the answer: Subtance A has a greater molecular mass than substance B.
Explanation:
thanks for posting all the comments all the time!
have a great week... stay warm from a snow storm
cual es la masa atomica del hidrogeno
El hidrógeno es el elemento químico de número atómico 1, representado por el símbolo H. Con una masa atómica de 1.00784 u es el más ligero de la tabla periódica de los elementos. Por lo general, se presenta en su forma molecular, formando el gas diatómico H₂ en condiciones normales.
Calculate the mass percent of KCl in a 0.35 m solution of KCl in water. Assume that the density of water is 1.00 g/mL.
Answer:
Mass percent of KCl is 2.61 %
Explanation:
Our solute is KCl
Our solvent is water
m means molality (moles of solute in 1kg of solvent)
1 kg = 1000 g
0.35 m means that 0.35 moles of KCl are contained in 1000g of solvent
We determine mass of solute: 0.35 mol . 74.55 g/mol = 26.09 g
Total mass of solution is: mass of solute + mass of solvent
26.09 g + 1000 g = 1026.09 g
Mass percent of KCl = (mass of KCl/ mass of solution) . 100
(26.09 / 1026.09) . 100 = 2.61 %
What type of reaction?
How many electrons are shown in the following electron
configuration: 1s22s22p63s 23p64s23d104p65s24d105p66s2 ?
Express your answer numerically as an integer.
Answer:
1s22s22p6
Explanation:
Neon is an element in the periodic table and has an atomic number of 10, which means it has 10 protons in its nucleus and thus since the number of protons and electrons is the same then it has 10 electrons.
Therefore, it has 2 electrons in the first energy shell and 8 electrons in the second energy shell. To elaborate further, the first shell has a single s-sub shell that contains a single s-orbital that can hold two electrons. The second energy shell has a single s-sub-shell whose s-orbital will occupy 2 electrons, and also has a p-orbital which can hold 6 electrons, making the second shell to have 8 electrons.
A rectangular piece of plastic has a width of 4.2 cm, a height of 1.9 cm and a length of 8.8 cm. If the mass of the plastic rectangle is 64.6 g, what is its density in g/mL?
Answer:
0.92g/mL
Explanation:
Density of a substance is calculated as follows:
Density = mass (m) ÷ volume (V)
According to this question, a rectangular piece of plastic has a width of 4.2 cm, a height of 1.9 cm and a length of 8.8 cm. Using the formula; L × W × H, the volume of the plastic can be calculated
V = L × W × H
V = 8.8 × 4.2 × 1.9
V = 70.2cm³
The mass of the plastic is 64.6g, hence, its density is:
Density = 64.6g ÷ 70.2cm³
Density of the rectangular plastic = 0.92g/cm³ or 0.92g/mL
explain in brief how some bacteria cause tooth cavities
Answer:
because some bacteria change the ph of the teeth and leads to tooth cavitiew
A molecule of acetone and a molecule of propyl aldehyde are both made from 3 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom. The molecules differ in their arrangement of atoms. How do formulas for the two compounds compare? Both compounds have the same molecular formula, but have unique structural formulas. Both compounds have unique molecular formulas and structural formulas. Both compounds have the same structural formula, but have unique molecular formulas.
Explanation:
The structures of both acetone and propanal are shown below:
In the formula of propanal there is -CHO functional group at the end.
In acetone -CO- group is present in the middle that is on the second carbon.
The molecular formula is C3H6O.
Both have same molecular formula but different structural formulas.
A chemical reaction was carried out by mixing 25 g of pure CaCO3 and 0.75 mole of pure HCl to give CaCl2, H2O and CO2. a. Which one is the limiting reactant and why? b. Calculate the mass of CaCl2 produced. c. How many number of water molecules are formed? d. Calculate the volume of CO2 gas liberated at STP. e. What mass of NaOH is required to absorb the whole CO2 produced in the reaction?
hola, esta pregunta es bastante difícil pero está bien, no lo sé, lo siento :) :)
All the options are solved and answer is written below
What is a Chemical Reaction ?A reaction between two or more compounds to form products made after chemical change is called a chemical reaction.
It is given that
A chemical reaction was carried out by mixing 25 g of pure CaCO₃ and 0.75 mole of pure HCl
CaCl₂ , H₂O and CO₂ are the products obtained.
CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O
Mole ratio CaCO₃ : HCl : CaCl₂ : H₂O = 1 : 2 : 1 : 1
Molar mass of CaCO₃ = 100 g/mol
Molar mass of HCl = 36.5 g/mol
Molar mass of H₂O = 18 g/mol
Molar mass of CaCl₂= 110.98 g/mol
Moles of CaCO₃ = 25/100 = 0.25 moles
Moles of HCl present = 0.75 mole
For 0.25 moles of CaCO₃ 0.5 moles of HCl is required , as the moles of HCl is present in excess therefore
a. CaCO₃ is the limiting reactant
b. mass of CaCl₂ produced
Moles of CaCl₂ produced = 0.25 moles
1 mole means 110.98 gm
0.25 mole means 0.25* 110.98 = 27.74 gm
c. moles of water molecules formed
for 0.25 moles of CaCO₃ 0.25 moles of water will be formed
d.Volume of Co produced at STP
PV = nRT
P= 1 atm
V=?
R = 0.0821 atm L/K/mol
V = 0.25 * 0.0821 * 273 /1
V = 5.6 liter
e. The mass of NaOH required to absorb CO₂ produced in the reaction
Ratio of NaOH:CO₂ = 2 :1
0.5 moles will be required , i.e.
0.5 *40
20 grams of NaOH will be required.
To know more about Chemical Reaction
https://brainly.com/question/23919704
#SPJ2
