Answer:
menu driven is not an interface
Explanation:
hope that helps you
please follow
please mark brainliest
I will follow you if you mark me brainliest
Which of these is NOT a user interface?
Choose: B. Command line
Which tab on the ribbon is used to access the global Access 2016 options?
Home
Create
Database Tools
File
Explanation:
the answer is Database Tools
What is the difference between a hard drive and a tape drive? Hard drives use magnetic heads and are fast to write data; tape drives write to disks and are fast to retrieve data. Hard drives write to disks and are fast to retrieve data; tape drives use magnetic heads and are fast to write data. Hard drives use magnetic heads and are best for archival data; tape drives write to disks and are used for ongoing backups. Hard drives write to disks and are used for ongoing backups; tape drives use magnetic heads and are best for archival data.
Answer:
A tape drive provides sequential access storage, unlike a hard disk drive, which provides direct access storage. A disk drive can move to any position on the disk in a few milliseconds, but a tape drive must physically wind tape between reels to read any one particular piece of data.
Explanation:
Architecturally tape drives are sequential storage, meaning that if you need to access some data at the end of the tape you needed to seek to the end and retrieve it. This can take seconds or minutes. Disks, OTOH are random access. Some hard drives use rotating media and movable heads , so the seek times are instantaneous , at least compared with tape drives. However, like tapes, there is a big advantage to using a rotating hard drive as sequential storage. It takes time, measured in milliseconds, for a head to move to another track. So traditionally, random access is much slower than sequential access.
SSDs have no internal moving parts so random access occurs in the same time frame as sequential access. Moreover, these drives usually have very high performance. For example, they can saturate a SATA data link, meaning that the SATA connection to the motherboard is now a bottleneck in disk access.
At one time tape drives were very popular. They were a low-cost alternative to using disks as backup. They were especially useful when IBM invented the Winchester “fixed” drive. This meant that the hard drive is fixed within its enclosure like they are today. Prior to this one could remove the drive pack and replace it. This was helpful when upgrading to a new version of the operating system as it was simple to replace the older drive pack should there be a problem.
Tape drives can be used in larger data centers, due to the fact that tape volumes can be removed and replaced so that the actual tape drive can backup many disk sets. Also the tape volumes can be stored off-site or in a fire-proof vault so this is valuable in a data recovery scenario.
how are computer used in education and entertainment?
Answer:
In Education:It improves students ability to learn fast as it helps us get information or research faster.It saves time.
In Entertainment:
It helps in movies by helping the producer to create special effects for some acts in a movie by making the impossible possible in movies.
Project: Programming as a Team
You know the advantages of working in a team. sharing the workload diverse knowledge sets diverse perspectives and ideas In this project, you are going to plan and write a program with a team of your fellow students. Objectives Decompose a project into assignments for members of a team. Your Programming Goal Your team is going to write a program as part of a team. Your teacher may require you to come up with your own goal. If not, use the following goal. You have been asked by a math teacher to write a program to process a pair of points. The program will find the distance between the points, the midpoint of the two points, and the slope between them. Your Task Plan your program. Meet with your team to plan the program. Assign a task to each member of the team. Record each person's name and their task. Write the program. Test your program. Be sure to test each function of your program. Evaluate the performance of each member of the team. Describe what each member did and how it worked. Record the project in a Word (or other word-processing) document, as described below. Your Document's Sections Part 1: Names Your name Your partners' names Part 2: Goal Describe the goal of your program Part 3: Team Tasks Give each person's name and their assigned task Part 4: The Program Copy and paste the program your team wrote Part 5: The Output Copy and paste the output; make sure you test each type of output Part 6: Team Evaluation Evaluate the performance of each member of your team Use this rubric to evaluate your project before you submit it.
Answer:
doma de su ermosa sonaer somaer domado tí domaer dona somee don comer dore ligeramente somaer domado domado amer no donar coja ER domaed voy yo comer dore domE ⚡doma cose conmigo está domaer di fi somaer dona
The advantages of working in a team are:
Better at problem solving.Fast and Increased potential for innovative ideas and growth.What is Teamwork?This is known to be a kind of collaborative work that is done when two or more people act as a group so that they can achieve a common goal.
Note that The advantages of working in a team are better at problem solving as more people can handle complex issues together and fast.
Learn more about from
https://brainly.com/question/3951300
#SPJ2
Elsa wants to save her work at the office to be continued at home either on a pen drive or CD. Outline three reasons why she will choose the pen drive over the CD
Answer:
More space
Pen drives generally have more storage capacity than CDs with CDs usually having just around 700 Megabytes for storage. Pen drives on the other hand can reach up to 2 Terabytes of data storage capacity. If the file she needs to save is high, Elsa should use the pen drive.
Scratch resistant
CDs can be scratched on the way to the house and lose some data or make it harder to extract. Pen drives do not have such problems are they are encased in an outer casing.
Portable and Accessible.
Pen drives are easy to carry which makes them portable and they are easier to use because a lot of computers do not have a CD drive but every computer has a port for a pen drive therefore making data in pen drives more accessible.
The most likely reason a firm would decide to establish an extranet would be the desire to Multiple Choice speed the flow of information on its private network by increasing the bandwidth. make the information on its network widely available to the general public. share information and collaborate with a select group of outside organizations or individuals. overcome the speed and capacity limitations of its external connection to the Internet by gaining access to the very-high-speed Backbone Network Service.
Answer: share information and collaborate with a select group of outside organizations or individuals.
Explanation:
When a company uses an intranet, it is for the purpose of sharing information within the company so in the same vein, an extranet is done to share information with entities outside the company be it people or organizations.
For information to be shared, the other companies and organizations need to have the means and authorization to join the extranet. Extranets are very useful as they enable collaboration across vast distances thereby increasing productivity.
The most likely reason a firm would decide to establish an extranet is B. share information and collaborate with a select group of outside organizations or individuals.
An extranet simply means a controlled private network that allows customers, vendors, partners, suppliers, etc to gain information about a company.
Extranet is vital to share information and collaborate with a select group of outside organizations or individuals. It is usually a private part of a website.
Read related link on:
https://brainly.com/question/10156285
How many characters should a strong password have? four six eight ten
Answer:
I say it have to be aleast 8 to complete a strong password
Explanation:
it's common sense
Answer:
8
Explanation:
The more the better but ten too much
Which option is used to insert a table in PowerPoint from another Office application?
In the Insert Object dialog box, choose Create from file.
In the Design tab, choose the Table Styles option.
In the Insert Table dialog box, choose Insert Table.
In the Layout tab, choose the Merge option.
Answer: In the Insert Object dialog box, choose Create from file.
Explanation:
To insert a table into PowerPoint from another Office application, go to the Insert Tab. In the Text ribbon on the far right, you will see "Object" next to Equation.
After clicking on that, select the "Create from File" option. It will allow you to browse a file you want to import from. PowerPoint will import the data from this file.
The ALIGN attribute of the P-tag cannot take what value right or left or justify or center?
The align attribute of p tag can not take 'much' value
#LETS STUDY#BRAINLEST LOVE❣️
What is the device that converts the signals to and from the wires so that the data can be sent and received by the computer?
A
domain name system
B
network
C
router
D
IP address
Answer:
E. Modem
Explanation:
A network comprises of two or more interconnected devices such as computers, routers, switches, smartphones, tablets, etc. These interconnected devices avail users the ability to communicate and share documents with one another over the network.
In order for a network to exist or be established, the devices must be turned (powered) on and interconnected either wirelessly or through a cable (wired) connection.
In Computer Networking, a node is the physical device that make up a network and are capable of sending, receiving, creating and storing data in communication.
Examples of network nodes are routers, hubs, computer, switches, smartphone, printers, modem, etc.
A modem is a networking device that converts the signals to and from the wires such as a telephone line, so that the data can be sent and received by the computer.
Basically, a modem is an abbreviation for modulator and demodulator and as such it is designed to convert signal from one network device to signals that another network device such as a computer can understand or read.
When sending a signal (data) over a network, a modem converts (modulate) digital data signal to an analogue signal and transmits it over a telephone line or other communication lines. Also, when receiving an analogue signal, a modem converts (demodulate) the signal to a digital data signal.
write chracteristics of all 5 generation of computer
Answer:
First generation — 1940–1956
-used vacuum tubes
ENIAC, UNIVAC I, IBM 650, IBM 701 etc.
mainframes taking up entire rooms
punched cards I/O
electrostatic and mercury delay line memory, beginning use of core
Second generation — 1956-1963
-used discrete transistors
IBM 7090 and 7094, UNIVAC 1107, PDP-1 and 8, etc.
first appearance of minicomputer (PDP-8)
punched cards I/O and line printers (mainframe), TTY (minicomputers)
core memory, magnetic tape for mass storage
Third generation — 1964-1971
-used integrated circuits
IBM System/360, UNIVAC 1108, PDP-8/I, PDP-11/20 and PDP-11/45, etc.
mostly same I/O and memory as second generation
Fourth generation — 1971-present
-use microprocessors
PDP-11/03 and PDP-11/34, Apple ][, IBM PC, Apple Macintosh, IBM z Series, etc.
transition from minicomputers to personal computers
video terminals used for I/O, specialty computer printers developed
fewer mainframes
semiconductor memory replaces core memory
hard drives and optical drives replace magnetic tape for mass storage, followed by solid-state drives (SSD)
Fifth generation — (current research)
-artificial intelligence and quantum computing
Answer:
The five generations of computer are characterized by electrical current flowing through the processing mechanisms listed below : The first within vacuum tubes The second within transistors The third within integrated circuits The fourth within microprocessors clips The fifth unveiled smart devices capable of artificial...
Explanation:
☆hope it is helpful to you ☆
☆MiraculousNisha^_^state 4 & circumstances under which warm
booting of a computer may be necessary
Answer:
to close an open application
"in a corporate environment, a well integrated management information system is a hacker's dream" . With reference to two examples, discuss the extent to which you agree or disagree to this statement
Answer:
Agree.
Explanation:
In a corporate environments systems are usually integrated to improve work efficiency. The more integration will result in well structured data organizing. It is necessary to put controls on misuse of this data. There should be strict internal controls placed in the system to avoid haccking as if there is hacck attack in one system, the whole integration may be haccked. The company should have backup plan in case of hacck attack so to completely shut down current system and work on another secured system to continue business operations.
Write a program num2rome.cpp that converts a positive integer into the Roman number system. The Roman number system has digits I 1 V 5 X 10 L 50 C 100 D 500 M 1,000 Numbers are formed according to the following rules: a. Only numbers 1 to 3,999 (inclusive) are represented. b. As in the decimal system, the thousands, hundreds, tens, and ones are express separately. c. The numbers 1 to 9 are expressed as I 1 II 2 III 3 IV 4 V 5 VI 6 VII 7 VIII 8 IX 9 As
Answer:
Explanation:
#include <stdio.h>
int main(void)
{
int num, rem;
printf("Enter a number: ");
scanf("%d", &num);
printf("Roman numerals: ");
while(num != 0)
{
if (num >= 1000) // 1000 - m
{
printf("m");
num -= 1000;
}
else if (num >= 900) // 900 - cm
{
printf("cm");
num -= 900;
}
else if (num >= 500) // 500 - d
{
printf("d");
num -= 500;
}
else if (num >= 400) // 400 - cd
{
printf("cd");
num -= 400;
}
else if (num >= 100) // 100 - c
{
printf("c");
num -= 100;
}
else if (num >= 90) // 90 - xc
{
printf("xc");
num -= 90;
}
else if (num >= 50) // 50 - l
{
printf("l");
num -= 50;
}
else if (num >= 40) // 40 - xl
{
printf("xl");
num -= 40;
}
else if (num >= 10) // 10 - x
{
printf("x");
num -= 10;
}
else if (num >= 9) // 9 - ix
{
printf("ix");
num -= 9;
}
else if (num >= 5) // 5 - v
{
printf("v");
num -= 5;
}
else if (num >= 4) // 4 - iv
{
printf("iv");
num -= 4;
}
else if (num >= 1) // 1 - i
{
printf("i");
num -= 1;
}
}
return 0;
}
what is technology in computer
Answer:
she is right or he :)
Explanation:
Answer:
well its somthing
Explanation:
computer in country development explain explain explain in presentation.
Answer:
A computer is a machine that can be programmed to carry out sequences of arithmetic or logical operations automatically. Modern computers can perform generic sets of operations known as programs. These programs enable computers to perform a wide range of tasks. A computer system is a "complete" computer that includes the hardware, operating system (main software), and peripheral equipment needed and used for "full" operation. This term may also refer to a group of computers that are linked and function together, such as a computer network or computer cluster
what are binary code
Answer:
Binary code is a coding system using binary digits 0 and 1 to represent a letter, digit, or other characters in a computer or other electronic device. The binary code assigns a pattern of binary digits, also known as bits, to each character, instruction, etc.
Helllllllllppppppppppp
Answer:
9
Explanation:
"++" at the beginning increases your "x" by 1 before using it.
if it placed after your variable, it will increase it after your program used it.
Select the item that best represents technology transfer?
Newtonian telescope
Magnetic Compass
Printing Press
Answer:
Printing Press
Explanation:
Technology transfer is the simple process of sharing or dissemination of information from person to person (or from one organisation to another)
Therefore, the item that best represents technology transfer from the given answer choices is the printing press.
This is because, the printing press helped to print paper containing information which was sent from one location to another.
ou use productivity apps on your iPad tablet device while traveling between client sites. You're concerned that you may lose your iPad while on the road and want to protect the data stored on it from being compromised. Currently, your iPad uses a 4-digit PIN number for a passcode. You want to use a more complex alpha-numeric passcode. You also want all data on the device to be erased if the wrong passcode is entered more than 10 consecutive times. What should you do
Answer:
Enable the Erase data optionDisable the simple passcode optionExplanation:
Most smartphone security experts agree that one way to prevent unauthorized access to one's iPad is to enable the erase data feature. Enabling this feature is believed to allow the possibility of all data on the device to be erased if a wrong passcode is entered after a specified number of times.
Of course, it is also possible to set a complex alphanumeric passcode, however, you'll need to first disable the simple passcode option.
1. Read the following scenario. What type of business letter do you think is required in this situation? (1 point)
Melissa and Melrose are both first-year students at a local community college. They both have interest in volunteering with a nonprofit organization. They decided to reach out to nonprofit organizations to ask about the steps they need to take in order to volunteer.
Answer:
It requires a formal letter.
Answer:
This would require a formal business letter, the type being a cover letter or inquiry.
Explanation: yes
write a short note about applications of computer
Answer:
Computer is very effective machine which can be used for teaching, learning, online bill payment, watching TV, home tutoring, social media access , playing games, internet access, etc. It also provides us to communicate with our friends and relatives although, they are in corner of world......
Elsa wants to save her work at the office to be continued at home either on a pen drive or CD. Outline three reasons why she will choose the pen drive over the CD
Answer:
Pen Drive offers more accessibility
Not every device is equipped with a CD player but every device has a USB port for a pen Drive. Saving on the pen Drive will therefore enable the data to be more accessible.
Pen Drive has more space.
CDs usually have a storage capacity of below a gigabyte whilst pen drives can reach up to 2 terabytes thereby offering exponentially more space to save data.
Safety of Data
CDs are more prone to damage as data could be lost if the CD is scratches. Pen Drives on the other hand are encased in an outer case that protects the data.
Write a Raptor program that will generate a random number between 1 and 10; do not display the randomly generated number. Let the user guess within 3 tries what the random number is. Display hints to help the user, for example "Your guess was too high!". Display appropriate messages based on each try, for example, "1 remaining try" or "You guessed correctly!"
Answer:
Using javascript, explanation with javascript comment
Explanation:
function guessNumber(){
var randomize= math.random()*10;
var roundrand= math.floor(randomize);
var getInput= prompt("guess number from 1 to 10");
var x= 3;
do(
if(getInput>roundrand){
Console.log("your guess is too high");
guessNumber();
}
if(getInput<roundrand){
Console.log("your guess is too high");
guessNumber();
}
else{
Console.log("you are correct pal!");
break;
}
)
while(x<=3)
}
/*Observe that we have used a recursive function that calls the function guessNumber again inside the function definition if the input fails the if condition and doesn't guess correctly. It checks for a correct number 3 times with the do... while loop and breaks out of the function once the user enters a correct input.*/
On SnapI blocked someone, unblocked them and I want to add them again but I forgot their username. Is there anything I can do? Does snap have a list of like my former friends or people I’ve blocked?
Answer:
There is no list of people you had blocked formerly, however you should have seen their username when unblocking them? That's the only way I can think to find their user. Maybe if you have a friend who knows their username, you can get it that way. Or if you remember just a bit of it or their first/last name, you can try searching that.
Which of the following is an example of a network layer (layer 3) protocol?
Answer:
IP
Explanation:
Well, when you say following, I'm guessing you mean:
UDP
TCP
Ethernet
IP
The answer is IP because, "The most significant protocol at layer 3 (also called the network layer) is the Internet Protocol, or IP. IP is the standard for routing packets across interconnected networks--hence, the name internet." - (ibm.com)
10 ICTs that encourage reading...?
10 ICTs that encourage reading are given below:-
laptop / desktopprojectorphotocopierprinterIpadswebboardsinteractive white boardmicrophoneTablets Internet .Hope it is helpful to you
De que se dio cuenta el sol al participar de la limpieza de playas?
La respuesta correcta para esta pregunta abierta es ls siguiente.
A pesar de que no se anexan opciones o incisos para responder, ni tampoco anexas algún contexto, lectura, libro artículo para poder responder, tratando de ayudarte hicimos una profunda investigación y podemos comentarte lo siguiente.
¿De que se dio cuenta el sol al participar de la limpieza de playas?
El Sol se dio cuenta de que desafortunadamente, los humanos no cuidan los océanos ya que tiran mucha basura y desperdicios al mar. Por lo tanto, lo contaminan.
Por esa razón, el Sol hizo una reflexión. La reflexión fu en el sentido del grado de daño que estamos provocando al mar y al medio ambiente en general. Lo estamos dañando.
Esto nos afecta a todos en mayor o menor grado porque el humano depende totalmente del medio ambiente y de la naturaleza. Aquí es donde la conciencia social debe hacer un alto para reflexionar y preguntarse hasta cuándo resistirá el medio ambiente tanta daño que se le ha provocado. La conciencia social debe crear un comportamiento social que actúo inmediatamente para proteger a la naturaleza, los mares, los ríos, los lagos, las selvas, los bosques, los desiertos, las tundras, los animales.
El ser humano depende de esos ecosistemas, y si los seguimos contaminando, estaremos acelerando nuestra destrucción. Debemos proteger el medio ambiente y crear una mayor conciencia en la importancia de la responsabilidad social.
The CPU is considered to be the............of a computer system
Answer:
The Central Processing Unit (CPU) is the brain or main source of the computer system.
Modify the statistics program from this chapter so that client programshave more flexibility in computing the mean and/ or standard deviation.Specifically, redesign the library to have the following functions:mean(nums) Returns the mean of numbers in nums.stdDev(nums) Returns the standard deviation of nums.meanStdDev (nums) Returns both the mean and standard deviation of nums.
Answer and Explanation:
Using Javascript:
function mean(nums){
var array_numbers= new array(nums);
var meanofNums= array_numbers.reduce()/array_numbers.length;
Console.log(meanofNums);
}
Function Std(nums){
var OurArray= new Array(nums);
var meanOfnums= mean(nums);
var i;
for(i=0; i<=OurArray.length; i++){
OurArray[i]= OurArray[i]-meanOfnums*OurArray[i]-meanOfnums;
}
var al_stdOfnums= OurArray.reduce()/OurArray.length;
var stdOfnums= Math. sqrt(al_stdOfnums);
Console.log(stdOfnums);
}
function meanStdDev (nums){
mean(nums);
Std(nums);
}
/*From the code above, we have defined functions and used them in the last function definition meanStdDev (nums), making for code reusability. In defining the functions, we have followed the formulas for calculating mean and standard deviations and implemented in that order. Notice how we used a for loop in std(nums) function definition to iterate through the elements of the array nums, squaring each value and reassigning a new value for each element(using index value) in the array. We then added these values in array using reduce method, dividing by array length and square rooting the value using the math object method sqrt().*/
