Answer: The correct statement is:
--> The voltage across each resistor is the same.
Explanation:
RESISTORS are defined as the components of an electric circuit which are capable of creating resistance to the file of electric current in the circuit. They work by converting electrical energy into heat, which is dissipated into the air. These resistors can be divided into two according to their arrangements in the electric cell. It include:
--> Resistors in parallel and
--> Resistors in series
RESISTORS are said to be in parallel when two or more resistance or conductors are connected to common terminals so that the potential difference ( voltage) across each conductor IS THE SAME but with different current flow through each of them. Also, Individual resistances diminish to equal a smaller total resistance rather than add to make the total.
A 5 kg object is moving in one dimension along the x-axis with a speed of 2 m/s. An external impulse acts on the force causing the speed of the object to increase to 5 m/s. The impulse lasted for 3 s. What is the average net force (in N) exerted on the object
Answer:
The correct answer is "15 Kg.m/s".
Explanation:
Given values are:
Mass,
m = 5 Kg
Initial velocity,
u = 2 m/s
Final velocity,
v = 5 m/s
Now,
The magnitude of change in linear momentum will be:
= [tex]m\times (v - u)[/tex]
By substituting the values, we get
= [tex]5\times (5 - 2)[/tex]
= [tex]5\times 3[/tex]
= [tex]15 \ Kg.m/s[/tex]
A 0.033-kg bullet is fired vertically at 222 m/s into a 0.15-kg baseball that is initially at rest. How high does the combined bullet and baseball rise after the collision, assuming the bullet embeds itself in the ball
Answer:
The maximum height risen by the bullet-baseball system after the collision is 81.76 m.
Explanation:
Given;
mass of the bullet, m₁ = 0.033 kg
mass of the baseball, m₂ = 0.15 kg
initial velocity of the bullet, u₁ = 222 m/s
initial velocity of the baseball, u₂ = 0
let the common final velocity of the system after collision = v
Apply the principle of conservation of linear momentum to determine the common final velocity.
m₁u₁ + m₂u₂ = v(m₁ + m₂)
0.033 x 222 + 0.15 x 0 = v(0.033 + 0.15)
7.326 = v(0.183)
v = 7.326 / 0.183
v = 40.03 m/s
Let the height risen by the system after collision = h
Initial velocity of the system after collision = Vi = 40.03 m/s
At maximum height, the final velocity, Vf = 0
acceleration due to gravity for upward motion, g = -9.8 m/s²
[tex]v_f^2 = v_i^2 +2gh\\\\0 = 40.03^2 - (2\times 9.8)h\\\\19.6h = 1602.4\\\\h = \frac{1602.4}{19.6} \\\\h = 81.76 \ m[/tex]
Therefore, the maximum height risen by the bullet-baseball system after the collision is 81.76 m.
) Efficiency of a lever is always less than hundred percent.
Yes. Because it opposes the law of friction
I hope this helps.
Explanation:
Please mark me brainliest
A 1200 kg car traveling east at 4.5 m/s crashes into the side of a 2100 kg truck that is not moving. During the collision, the vehicles get stuck together. What is their velocity after the collision? A. 2.9 m/s east B. 1.6 m/s east m C. 2.6 m/s east D. 1.8 m/s east
Answer:
Explanation:
This is a simple Law of Momentum Conservation problem of the inelastic type. The equation for this is
[tex][m_1v_1+m_2v_2]_b=[(m_1+m_2)v]_a[/tex] Filling in:
[tex][1200(4.5)+2100(0)]=[(1200+2100)v][/tex] which simplifies to
5400 + 0 = 3300v
so v = 1.6 m/s to the east, choice B
which is the correct formula for calculating the age of meteor right if using half life
Answer:
n × t_1/2
Exmplanation:
The age of meteorite is calculated by multiplying it's quantity n with the half life . This means that the formula is for age of this meteorite is;
Age of meteorite= n × t_1/2
where;
n = quantity of the meteorite
t_/2 = half life of the meteorite
Thus:
The correct formula is; n × t_1/2
If a bale of hay behind the target exerts a constant friction force, how much farther will your arrow burry itself into the hay than the arrow from the younger shooter
Answer:
The arrow will bury itself farther by 3S₁
Explanation:
lets assume; the Arrow shot by me has a speed twice the speed of the arrow fired by the younger shooter
Given that ; acceleration is constant , Frictional force is constant
A₂ = A₁
Vf²₂ - Vi²₂ / 2s₂ = Vf₁² - Vi₁² / 2s₁ ---- ( 1 )
final velocities = 0
Initial velocities : Vi₂ = 2(Vi₁ )
Back to equation 1
0 - (2Vi₁ )² / 2s₂ = 0 - Vi₁² / 2s₁
hence :
s₂ = 4s₁
hence the Arrow shot by me will burry itself farther by :
s₂ - s₁ = 3s₁
Note : S1 = distance travelled by the arrow shot by the younger shooter
Explain whether the unit of work is a fundamental or derived unit
Answer:
answer here
Explanation:
the unit of work is fundamental unit because it doesn't depend on other units.
__________________
Thx
Answer:
The SI unit of work is joule (J)
Explanation:
Joule is a derived unit. ∴ unit of work is a derived unit
SCALCET8 3.9.018.MI. A spotlight on the ground shines on a wall 12 m away. If a man 2 m tall walks from the spotlight toward the building at a speed of 1.7 m/s, how fast is the length of his shadow on the building decreasing when he is 4 m from the building
Answer:
The length of his shadow is decreasing at a rate of 1.13 m/s
Explanation:
The ray of light hitting the ground forms a right angled triangle of height H, which is the height of the building and width, D which is the distance of the tip of the shadow from the building.
Also, the height of the man, h which is parallel to H forms a right-angled triangle of width, L which is the length of the shadow.
By similar triangles,
H/D = h/L
L = hD/H
Also, when the man is 4 m from the building, the length of his shadow is L = D - 4
So, D - 4 = hD/H
H(D - 4) = hD
H = hD/(D - 4)
Since h = 2 m and D = 12 m,
H = 2 m × 12 m/(12 m - 4 m)
H = 24 m²/8 m
H = 3 m
Since L = hD/H
and h and H are constant, differentiating L with respect to time, we have
dL/dt = d(hD/H)/dt
dL/dt = h(dD/dt)/H
Now dD/dt = velocity(speed) of man = -1.7 m/s ( negative since he is moving towards the building in the negative x - direction)
Since h = 2 m and H = 3 m,
dL/dt = h(dD/dt)/H
dL/dt = 2 m(-1.7 m/s)/3 m
dL/dt = -3.4/3 m/s
dL/dt = -1.13 m/s
So, the length of his shadow is decreasing at a rate of 1.13 m/s
(c) The ball leaves the tennis player's racket at a speed of 50 m/s and travels a
distance of 20 m before bouncing.
(i) Calculate how long it takes the ball to travel this distance.
(1 mark)
Answer:
t=0.417s
Explanation:
After the ball hits the racket it is in freefall(assume air resistance as negligible)
so a=-g
use
x-x0=v0t+1/2at^2
Plug in givens
20=50t-4.9t^2
Solve quadratic equation using quadratic formula
t= 0.417 seconds, (the other answer is extraneous because it is too big because in 1 second, the ball travels 50 meters)
Two cars are moving. The first car has twice the mass of the second car but only half as much kinetic energy. When both cars increase their speed by 2.76 m/s, they then have the same kinetic energy. Calculate the original speeds of the two cars.
Let m be the mass of the second car, so the first car's mass is 2m.
Let K be the kinetic energy of the second car, so the first car's kinetic energy would be K/2.
Let u and v be the speeds of the first car and the second car, respectively. At the start,
• the first car has kinetic energy
K/2 = 1/2 (2m) u ² = mu ² ==> K = 2mu ²
• the second car starts with kinetic energy
K = 1/2 mv ²
It follows that
2mu ² = 1/2 mv ²
==> 4u ² = v ²
When their speeds are both increased by 2.76 m/s,
• the first car now has kinetic energy
1/2 (2m) (u + 2.76 m/s)² = m (u + 2.76 m/s)²
• the second car now has kinetic energy
1/2 m (v + 2.76 m/s)²
These two kinetic energies are equal, so
m (u + 2.76 m/s)² = 1/2 m (v + 2.76 m/s)²
==> 2 (u + 2.76 m/s)² = (v + 2.76 m/s)²
Solving the equations in bold gives u ≈ 1.95 m/s and v ≈ 3.90 m/s.
a vehicle start moving at 15m/s. How long will it take to stop at a distance of 15m?
Answer:
Explanation:
Speed= distance/time
Or time = distance/speed
According to your question
Speed=15m/s
and. Distance=1.2km. ,we must change kilometer in meter because given speed is in m/s
D= 1.2km = 1.2×1000m =1200meter
Time = distance/ speed
1200/15 =80second
Or. 1min and 20 sec will be your answer.
two point charges with charge q are initially separated by a distance d. if you double the charge on both charges, how far should the charges be separated for the potential energy between them to remain the same
Answer:
r ’= 4 r
Explanation:
Electric potential energy is
U = [tex]k \frac{q_1q_2}{r_{12}}[/tex]k q1q2 / r12
in this exercise
q₁ = q₂ = q
U = k q² / r
for when the charge change
U ’= k q’² / r’
indicate that
q ’= 2q
U ’= U
we substitute
U = k (2q) ² / r ’
U = 4 k q² / r ’
we substitute
[tex]k \ \frac{q^2}{r} = 4 k \ \frac{q^2}{r'}[/tex]k q² / r = 4 k q² / r ’
r ’= 4 r
Is the actual height the puck reached greater or less than your prediction? Offer a possible reason why this might be.
Answer:
Answer to the following question is as follows;
Explanation:
The puck's real altitude is lower than ones projection. That's because the mechanism may not be completely frictionless. Electricity is nevertheless wasted owing to particle interactions such as friction, which might explain why the present the results is lower than predicted.
If a car generates 22 hp when traveling at a steady 100 km/h , what must be the average force exerted on the car due to friction and air resistance
Answer:
The average force exerted on the car is 590.12 N.
Explanation:
Given that,
The power generated, P = 22 hp = 16405.4 W
Speed of the car, v = 100 km/h = 27.8 m/s
We need to find the average force exerted on the car due to friction and air resistance.
We know that,
Power, P = F v
Where
F is force exerted on the car
[tex]F=\dfrac{P}{v}\\\\F=\dfrac{16405.4}{27.8}\\\\F=590.12\ N[/tex]
So, the average force exerted on the car is 590.12 N.
A particle of mass 1.2 mg is projected vertically upward from the ground with a velocity of 1.62 x 10 cm/h. Use the above information to answer the following four questions: 7. The kinetic energy of the particle at time t = 0 s is A. 1.215 x 10-3 J B. 2.430 J C. 1215 J D. 9.72 x 106 J E. OJ (2)
Answer:
K = 0 J
Explanation:
Given that,
The mass of the particle, m = 1.2 mg
The speed of the particle, [tex]v=1.62\times 10\ cm/h[/tex]
We need to find the kinetic energy of the particle at time t = 0 s.
At t = 0 s, the particle is at rest, v = 0
So,
[tex]K=\dfrac{1}{2}mv^2[/tex]
If v = 0,
[tex]K=0\ J[/tex]
So, the kinetic energy of the particle at time t = 0 s is 0 J.
2. How do the phytochemicals present in various foods help us?
Phytochemicals are compounds that are produced by plants ("phyto" means "plant"). They are found in fruits, vegetables, grains, beans, and other plants. Some of these phytochemicals are believed to protect cells from damage that could lead to cancer.
A cylindrical specimen of aluminum having a diameter of 0.505 in. (12.8 mm) and a gauge length of 2.0 in. (50.8 mm) is pulled in tension. Use the load-elongation characteristics tabulated below to complete parts (a) through (f).
a. Plot the data as engineering stress versus engineering strain.
b. Compute the modulus of elasticity.
c. Determine the yield strength at a strain offset of 0.002.
d. Determine the tensile strength of this alloy.
e. What is the approximate ductility, in percent elongation?
f. Compute the strain energy density up to yielding (modulus of resilience).
( Load in N Load in lb Length in mm Length in in. 2.000 2.002 2.004 2.006 2.008 2.010 2.020 2.040 2.080 2.120 2.160 2.200 2.240 2.270 2.300 2.330 Fracture 50.800 7330 15,100 3400 23,100 5200 30,400 6850 34,400 7750 38,400 8650 41,3009300 44,800 10,100 46,200 10,400 53, 47,300 10,650 54.864 47,500 10,700 55.880 46,100 10,400 44,800 10,100 42,600 9600 3,400 8200 Fracture Fracture Fracture 50.851 50.902 50.952 51.003 51.054 1650 51.308 51.816 52.832 848 56.896 57.658 58.420 59.182
Answer:
A cylindrical specimen of aluminum having a diameter of 0.505 in. (12.8 mm) and a gauge length of 2.0 in. (50.8 mm) is pulled in tension. Use the load-elongation characteristics tabulated below to complete parts (a) through (f).
Find the coefficient of kinetic friction between a 3.80-kg block and the horizontal surface on which it rests if an 87.0-N/m spring must be stretched by 6.50 cm to pull it with constant speed. Assume that the spring pulls in the horizontal direction.
Answer:
μ = 0.15
Explanation:
Let's start by using Hooke's law to find the force applied to the block
F = k x
F = 87.0 0.065
F = 5.655 N
Now we use the translational equilibrium relation since the block has no acceleration
∑ F = 0
F -fr = 0
F = fr
the expression for the friction force is
fr = μ N
if we write Newton's second law for the y-axis
N -W = 0
N = W = mg
we substitute
F = μ mg
μ = F / mg
μ = [tex]\frac{5.655}{3.8 \ 9.8}[/tex]
μ = 0.15
Help me plssssssss cause I’m struggling
Answer:
I am pretty sure it is C
Explanation:
It can be found all over the universe
A 0.160kg glider is moving to the right on a frictionless, horizontal air track with a speed of 0.820m/s . It has a head-on collision with a 0.300kg glider that is moving to the left with a speed of 2.27m/s . Suppose the collision is elastic.
Part A
Find the magnitude of the final velocity of the 0.160kg glider. m/s
Part B
Find the direction of the final velocity of the 0.160kg glider.
i. to the right
ii. to the left
Part C
Find the magnitude of the final velocity of the 0.300kg glider. m/s
Part D
Find the direction of the final velocity of the 0.300kg glider.
Answer:
A) v_{f1} = -3.2 m / s, B) LEFT , C) v_{f2} = -0.12 m / s, D) LEFT
Explanation:
This is a collision exercise that can be solved using momentum conservation, for this we define a system formed by gliders, so that the forces during the collision are internal and the moment is conserved.
Let's use the subscript 1 for the lightest glider m1 = 0.160 kg and vo1 = 0.820 m / s
subscript 2 for the heaviest glider me² = 0.820 kg and vo2 = -2.27 m / s
Initial instant. Before the crash
p₀ = m₁ v₀₁ + m₂ v₀₂
Final moment. After the crash
p_f = m₁ v_{f1} + m₂ v_{f2}
p₀ = p_f
m₁ v₀₁ + m₂ v₀₂ = m₁ v_{f1} + m₂ v_{f2}
as the shock is elastic, energy is conserved
K₀ = K_f
½ m₁ v₀₁² + ½ m₂ v₀₂² = ½ m₁ [tex]v_{f1}^2[/tex] + ½ m₂ [tex]v_{f2}^2[/tex]
m₁ (v₀₁² - v_{f1}²) = m₂ (v_{f2}² -v₀₂²)
let's make the relationship
(a + b) (a-b) = a² -b²
m₁ (v₀₁ + v_{f1}) (v₀₁-v+{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)
let's write our two equations
m₁ (v₀₁ -v_{f1}) = m₂ (v_(f2) - v₀₂) (1)
m₁ (v₀₁ + v_{f1}) (v₀₁-v_{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)
we solve
v₀₁ + v_{f2} = v_{f2} + v₀₂
we substitute in equation 1 and obtain
M = m₁ + m₂
[tex]v_{f1} = \frac{m_1-m_2}{M} v_o_1 + 2 \frac{m_2}{M} v_f_2[/tex]
[tex]v_f_2 = \frac{2m_1}{M} v_o_1 + \frac{m_2-m_1}{M} v_o_2[/tex]vf2 = 2m1 / mm vo1 + m2-m1 / mm vo2
we calculate the values
m₁ + m₂ = 0.160 +0.3000 = 0.46 kg
v_{f1} = [tex]\frac{ 0.160 -0.300} {0.460} \ 0.820 + \frac{2 \ 0300}{0.460} \ (-2.27)[/tex]
v_{f1} = -0,250 - 2,961
v_{f1} = - 3,211 m / s
v_{f2} = [tex]\frac{2 \ 0.160}{0.460} \ 0.820 + \frac{0.300 - 0.160}{0.460 } \ (-2.27)[/tex]
v_{f2} = 0.570 - 0.6909
v_{f2} = -0.12 m / s
now we can answer the different questions
A) v_{f1} = -3.2 m / s
B) the negative sign indicates that it moves to the left
C) v_{f2} = -0.12 m / s
D) the negative sign indicates that it moves to the LEFT
1. An excited lithium atom emits a red light with wavelength a = 671nm. What is the corresponding photon energy? hc (6.63 x 10-34).S)(3.0 x 108m/s)
Answer:
E = 2,964 10⁻¹⁹ J
Explanation:
The energy of the photons is given by the Planck relation
E = h f
the speed of light is related to wavelength and frequency
c = λ f
we substitute
E = h c /λ
let's reduce the magnitude to the SI system
λ = 671 nm = 671 10⁻⁹ m
let's calculate
E = 6.63 10⁻³⁴ 3 10⁸ /671 10⁻⁹
E = 2,964 10⁻¹⁹ J
A copper wire 1.0 meter long and with a mass of .0014 kilograms per meter vibrates in two segments when under a tension of 27 Newtons. What is the frequency of this mode of vibration
Answer:
the frequency of this mode of vibration is 138.87 Hz
Explanation:
Given;
length of the copper wire, L = 1 m
mass per unit length of the copper wire, μ = 0.0014 kg/m
tension on the wire, T = 27 N
number of segments, n = 2
The frequency of this mode of vibration is calculated as;
[tex]F_n = \frac{n}{2L} \sqrt{\frac{T}{\mu} } \\\\F_2 = \frac{2}{2\times 1} \sqrt{\frac{27}{0.0014} }\\\\F_2 = 138.87 \ Hz[/tex]
Therefore, the frequency of this mode of vibration is 138.87 Hz
a student weighs 1200N they are standing in an elevator that is moving downwards at a constant speed of
Answer:
Elevator That Is Moving Downwards At A Constant Speed Of 4.9 M/S. What Is The Magnitude Of The Net Force Acing On The Student?
This problem has been solved!
This problem has been solved!See the answer
This problem has been solved!See the answerA student weighs 1200N. They are standing in an elevator that is moving downwards at a constant speed of 4.9 m/s. What is the magnitude of the net force acing on the student?
Explanation:
use this R= m(g-a), where R = reaction = weight, m= mass, a= acceleration and g= acceleration due to gravity
A typical incandescent light bulb consumes 75 W of power and has a mass of 20 g. You want to save electrical energy by dropping the bulb from a height great enough so that the kinetic energy of the bulb when it reaches the floor will be the same as the energy it took to keep the bulb on for 2.0 hours. From what height should you drop the bulb, assuming no air resistance and constant g?
Answer:
h = 2755102 m = 2755.102 km
Explanation:
According to the given condition:
Potential Energy = Energy Consumed by Bulb
[tex]mgh = Pt\\\\h = \frac{Pt}{mg}[/tex]
where,
h = height = ?
P = Power of bulb = 75 W
t = time = (2 h)(3600 s/1 h) = 7200 s
m = mass of bulb = 20 g = 0.02 kg
g = acceleration due to gravity = 9.8 m/s²
Therefore,
[tex]h = \frac{(75\ W)(7200\ s)}{(0.02\ kg)(9.8\ m/s^2)}[/tex]
h = 2755102 m = 2755.102 km
An electric eel can generate a 180-V, 0.1-A shock for stunning its prey. What is the eel's power output
Power output = volts x amps
Power output = 170 volts x 0.1 amps
Power output = 18 watts
Una cuerda horizontal tiene una longitud de 5 m y masa de 0,00145 kg. Si sobre esta cuerda se da un pulso generando una longitud de onda de 0,6 m y una frecuencia de 120 Hz. La tensión a la cual está sometida la cuerda es:
a. 1,5 N
b. 15,0 N
c. 3,1 N
d. 5,2 N
Answer:
Option (A) is correct.
Explanation:
A horizontal rope has a length of 5 m and a mass of 0.00145 kg. If a pulse occurs on this string, generating a wavelength of 0.6 m and a frequency of 120 Hz. The tension to which the string is subjected is
mass of string, m = 0.00145 kg
Frequency, f = 120 Hz
wavelength = 0.6 m
Speed = frequency x wavelength
speed = 120 x 0.6 = 72 m/s
Let the tension is T.
Use the formula
[tex]v =\sqrt\frac{T L}{m}\\\\72 = \sqrt\frac{T\times 5}{0.00145}\\\\T = 1.5 N[/tex]
Option (A) is correct.
The force an ideal spring exerts on an object is given by , where measures the displacement of the object from its equilibrium position. If , how much work is done by this force as the object moves from to
Answer:
The correct answer is "1.2 J".
Explanation:
Seems that the given question is incomplete. Find the attachment of the complete query.
According to the question,
x₁ = -0.20 mx₂ = 0 mk = 60 N/mNow,
⇒ [tex]W=\int_{x_1}^{x_2}F \ dx[/tex]
⇒ [tex]=\int_{x_1}^{x_2}-kx \ dx[/tex]
⇒ [tex]=-k \int_{-0.20}^{0}x \ dx[/tex]
By putting the values, we get
⇒ [tex]=-(60)[\frac{x^2}{2} ]^0_{-0.20}[/tex]
⇒ [tex]=-60[\frac{0}{2}-\frac{0.04}{2} ][/tex]
⇒ [tex]=1.2 \ J[/tex]
If I could lift up to ten tons and I threw a ball the size of an orange but weighed a ton, to the ground, how big of an impact would it make? And could you also show me the equation to solve similar problems myself. Thank you.
Answer:
The impact force is 98000 N.
Explanation:
mass = 10 tons
The impact force is the weight of the object.
Weight =mass x gravity
W = 10 x 1000 x 9.8
W = 98000 N
The impact force is 98000 N.
A charge Q exerts a 1.2 N force on another charge q. If the distance between the charges is doubled, what is the magnitude of the force exerted on Q by q
Answer:
0.3 N
Explanation:
Electromagnetic force is F= Kq1q2/r^2, where r is the distance between charges. If r is doubled then the force will be 1/4F which is 0.3 N.
The magnitude of the force exerted on Q by q when the distance between them is doubled is 0.3 N
Coulomb's law equationF = Kq₁q₂ / r²
Where
F is the force of attraction K is the electrical constant q₁ and q₂ are two point charges r is the distance apart Data obtained from the question Initial distance apart (r₁) = rInitial force (F₁) = 1.2 NFinal distance apart (r₂) = 2rFinal force (F₂) =? How to determine the final forceFrom Coulomb's law,
F = Kq₁q₂ / r²
Cross multiply
Fr² = Kq₁q₂
Kq₁q₂ = constant
F₁r₁² = F₂r₂²
With the above formula, we can obtain the final force as follow:
F₁r₁² = F₂r₂²
1.2 × r² = F₂ × (2r)²
1.2r² = F₂ × 4r²
Divide both side by 4r²
F₂ = 1.2r² / 4r²
F₂ = 0.3 N
Learn more about Coulomb's law:
https://brainly.com/question/506926
find out the odd one and give reason (length, volume, time, mass
Answer:
Time
Explanation:
The answer to the question is actually time. Time is not needed when you calculate the mass or volume of an object, a square, sphere, rectangle, or any other 3D shape. You must also calculate the length to know what numbers you will be multiplying by. The answer to the question is time.
