Which statement about Schrödinger’s theory of the atomic model is true?

Answer:

The scientific method is applied to inference through the steps taken to make both inductive and deductive inferences. Inductive inference begins with an observation, and then a pattern of such observation develops. One then makes a hypothesis based on the pattern and finally a theory based on the hypothesis

Hope it helps!

Mark it as Brainliest!!

Answer:

ZnC4H10

Explanation:

The empirical formula of a compound refers to the formula that gives the simplest whole number ratio of each atoms of the elements in the compound.

The empirical formula is calculated thus:

The given percentages in the question represent the mass in grams of each element in the compound.

Zinc= 53%, C= 38.9%, H= 8.1% which represents 53g, 38.9g and 8.1g of each element respectively.

Molar Mass of Zn= 65.4 g/mol

Molar Mass of C= 12 g/mol

Molar Mass of H= 1 g/mol

Step 1: Divide the mass of each element by the molar mass given to convert to moles:

Zn= 53/65.4 = 0.81moles

C= 38.9/12 = 3.24moles

H= 8.1/1 = 8.1moles

Step 2: Divide each mole value by the smallest number of moles calculated, which is 0.81moles:

Zn= 0.81/0.81 = 1

C= 3.24/0.81 = 4

H= 8.1/0.81= 10

This is the mole ratio represented in the subscript of each element in the empirical formula:

That is, Zn (1) C (4) H (10)

Empirical formula= ZnC4H10

Answer:

C

Explanation:

It's the amount of products you get compared to all the reactants you use. It's kind of like economy in that it's profit, and the higher the atom economy the more products/profit you have.

Answer:

C.) The measure of how much of the reactants end up as products in a chemical reaction.

Explanation:

I got it right on founders edtell.

Answer:

The answer is D.

Explanation:

Malleable is the property of metal not non-metal.

Answer:

malleable

Explanation:

Answer:

answer of question 1 is

Explanation:

solids are denser than liquid and gases because solid particles are closely packed and do not have any empty spaces between their particels so when  solid will heated its particles will spread  and there will have more spaces between them  so a solid expand on heating.        

Answer:

[tex]7.589\times 10^{2}[/tex]

Explanation:

The expression can be solved mathematically as follows:

1) [tex]8.310\times 10^{2}-7.210\times 10^{1}[/tex] Given

2) [tex]8.310\times 10^{1+1} - 7.210\times 10^{1}[/tex] Definition of sum

3) [tex](8.310\times 10^{1})\times 10^{1}-7.210\times 10^{1}[/tex] [tex]a^{m+n} = a^{m}\cdot a^{n}[/tex]/Associative property

4) [tex](8.310\times 10^{1}-7.210)\times 10^{1}[/tex] Distributive property

5) [tex](83.100-7.210)\times 10^{1}[/tex] Multiplication

6) [tex]75.89\times 10^{1}[/tex] Subtraction.

7) [tex](7.589\times 10^{1})\times 10^{1}[/tex] Multiplication/Associative property

8) [tex]7.589\times (10^{1}\times 10^{1})[/tex] Associative property

9) [tex]7.589\times 10^{2}[/tex] [tex]a^{m+n} = a^{m}\cdot a^{n}[/tex]/Result

Answer:examples for neutralization - treating indigestion,treatment for insect bites.hope it help you

Explanation:

Answer:

Cells are the "building blocks for all living things." Without cells, we couldn't survive. Cells do many important things. Some of the things they can do are taking in food nutrients, frame our bodies, and change the food nutrients into energy.

Answer:

The scientists and all test subjects involved in the investigation work for the company that sells the medication.

Explanation:

The options are as below:

A. The investigation compared a group that took the medication to a control group that did not take the medication.

B. The scientists and all test subjects involved in the investigation work for the company that sells the medication.

C. The weight loss medication worked for 95 out of the 100 test subjects, while only 15 of the 100 control subjects lost weight.

D. The weight loss results were replicated by scientists conducting a study at an independent institution

The correct option would be that the scientists and all test subjects involved in the investigation work for the company that sells the medication.

When selecting the test subjects for research, the selection must be as random as possible so as to ensure an unbiased outcome and increase the reliability of the research.

Limiting the test subjects to those that work in the company that sells the medication will generally reduce the reliability of the outcome because of element of bias that can be introduced either knowingly or unknowingly.

The test subjects must have been selected from the general population of target users for the medication and not limited to just the employees of the manufacturing company.

Correct option: B

Molarity= No of moles of solute * 1000 / vol solution in ml

No of moles= Given mass / Molar mass

Given Mass of solute (H2O2)= 10g

Molar mass of H2O2=34gmol^-1

No of moles= 10/34= 0.294 moles

Volume of solution=50ml

Molarity =   0.294*1000 / 50

Molarity = 5.8M

The transformation of liquid into solid when it reaches when it's temperature is below freezing point.

Answer:

Freezing:

When liquid is converted to solid, the process is called freezing.

Conditions for freezing:

1) Temperature must be lowered.

2) The temperature should be below 0 degree centigrade.

Example:

The conversion of "liquid water" into "ice".

=> We can use a "freezer" to freeze things.

Explanation:

SOLID

Sodium hydroxide exists in the solid phase at room temperature. You would find it in the lab as hemispherical white solid pellets. The phase of a substance depends on temperature and pressure. As you heat a solid, it will melt and change to the liquid phase.

Answer:

Noble gases are the least reactive of all known elements. Their outer energy levels are full because they each have eight valence electrons. ... As a result, noble gases cannot become more stable by reacting with other elements and gaining or losing valence electrons.

Explanation:

Noble gases have complete valence shells so they do not participate in the reactions while the other elements in the main group have incomplete valence shells so they participate in the reaction to complete it.

Noble gases can be described as the six elements that belong to the 18th  group of the modern periodic table. The elements of group 18 are Helium, Neon, Argon, Krypton, Xenon, and Radon.

Under normal temperature and pressure conditions, all noble gases exist in the gaseous state and exhibit low chemical reactivity hence they are also referred to as inert gas.  All noble gases possess stable electronic configurations because their valence shell is fully filled.

Noble gases are generally found as mono-atomic gases. The general electronic configuration group 18 elements can be written as ‘ns²np⁶’ where n is the principal quantum number.

Therefore, the reactivity of the noble gases can be distinguished from other elements in the main group.

Learn more about noble gases, here:

brainly.com/question/11764545

#SPJ2

Answer: Johannes Kepler

Answer:

i believe the answer us kepler

Explanation:

Answer:

Halogens

Explanation:

Matter is defined as a substance which has mass and occupies volume. The three states of matter are solid, liquid and gas.

Elements which are present in group 17 are known as halogens.

Elements present in this group are fluorine, chlorine, bromine and iodine.

At room temperature, both fluorine and chlorine exists as a gas.

Bromine exists as a liquid and iodine exists as a solid.

Therefore, we can conclude that halogen groups are likely to have elements in three states of matter.

Explanation:

ionic compounds have high melting points

Answer:

See explanation

Explanation:

The formation of isomers is common to octahedral complexes. Isomers are different compounds with the same molecular formula but different structural formulas. Isomers have different atom to atom connections. Werner's complexes can display; polymerization, ionization, linkage, geometric and optical isomerism among others.

Isomers of coordination compounds are not easily recognizable and not easily separable in the laboratory.

The geometric, linkage and ionization isomers of the complex given in the question are shown below.

Answer:

Explanation:

Absorption of digested food takes place in the small intestine.

Hope this helps

plz mark as brainliest!!!!!

Answer:

Absorption of digested food takes place in the small intestine.

Explanation:

Answer:

Chlorine has strong inter molecular forces than iodine

Explanation:

Answer:

Chlorine has strong inter molecular forces than iodine

Explanation:

I2 is a solid while Cl2 is a gas because Iodine molecules are larger and therefore experience stronger intermolecular forces.

HOPE IT HELPS :)

PLEASE MARK IT THE BRAINLIEST!

Answer: Air and fuel intake, compression and ignition, combustion and expansion, exhaust

Explanation:

Answer:

Reduce high-pressure gas in the scuba cylinder to ambient (surrounding) pressure.

Explanation:

The primary function of a scuba regulator would be to reduce high-pressure gas in the scuba cylinder to ambient pressure.

A scuba regulator is a structure found attached to the scuba cylinder usually carried by scuba divers. The structure regulates the pressure of the breathing gas in the cylinder to a safe level before the gas becomes available for the breathing process of divers.

Usually, the gas in a scuba cylinder is at a high level. Hence, what the regulator does is to bring it down to a level that would be safe for the breathing of the diver.

Answer:

C. 1 cubic foot of loose sand

Explanation:

For many  objects having equal volume , surface area will be maximum

of the object which has spherical shape .

But when a sphere is broken into tiny small spheres , total surface area of all the small spheres will be more than surface area of big sphere .

Hence among the given option , surface area of loose sand will have greatest surface area . Loose sand is equivalent to small spheres .

Answer:

the answer would be C 1 cubic foot of loose sand.

Answer:

Alpha decay is a type of radioactive disintegration in which unstable atomic nucleus releases a helium nucleus or alpha particle and transform into a different element. The new element formed will be reduced by four and the atomic number will be reduced by two.

Example of alpha decay is: Uranium 238 transform into Thorium 234 with the emission of an alpha particle.

Answer:

[tex]\large \boxed{\text{183 g}}[/tex]  

Explanation:

[tex]\begin{array}{rcl}\text{Density} & = & \dfrac{\text{Mass}}{\text{Volume}}\\\\\rho & = &\dfrac{m}{V}\\\\1.83 \text{ g$\cdot$ cm}^{-3} & = & \dfrac{m}{\text{100 cm}^{3}}\\\\m & = & \text{183 g}\\\end{array}\\\text{There are $\large \boxed{\textbf{183 g}}$ of sulfuric acid.}[/tex]

Answer:

Iron and aluminum are both examples of metals that are used commonly in everyday life.

Answer:

4.30 × 10²⁰ atoms

Explanation:

You need to find out how many moles you have.  First, convert milligrams to grams.

62.5 mg × (1 g)/(1000 mg) = 0.0625 g

Next, use the molar mass to convert from grams to moles.

0.0625 g ÷ 87.62 g/mol = 7.13 × 10⁻⁴ mol

To convert from moles to atoms, you need to use Avogadro's number (6.022 × 10²³).  Avogadro's number is the number of atoms in a mole.

7.13 × 10⁻⁴ mol × 6.022 × 10²³ atoms/mol = 4.296 × 10²⁰ ≈ 4.30 × 10²⁰ atoms

You will have 4.30 × 10²⁰ atoms of strontium.

The number of Strontium atoms are 4.30 × 10²⁰ atoms

Given:

Mass of Strontium = 62.5 mg × (1 g)/(1000 mg) = 0.0625 g

Molar mass of Strontium = 87.62 g/mol

To find:

Moles of Strontium = ?

It is defined as given mass over molar mass.

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}\\\\\text{Number of moles}=\frac{0.0625 g}{87.62 g/mol }\\\\\text{Number of moles}=7.13 * 10^{-4} mol[/tex]

Avogadro's number is the number of atoms in a mole (6.022 * 10²³)

Conversion of moles into atoms:

[tex]7.13 × 10^{-4} mol * 6.022 * 10^{23} atoms/mol \\\\\text{ Sr atoms}= 4.296 * 10^{20} = 4.30 * 10^{20} atoms[/tex]

Thus, Strontium atoms will be 4.30 × 10²⁰ atoms.

Find more information about Number of moles here:

brainly.com/question/15356425

Answer:

[tex]\large \boxed{350}[/tex]

Explanation:

In multiplication and division problems, the answer can have no more significant figures than the number with the fewest significant figures.

My calculator gives the result:

[tex]\dfrac{4568}{13} = 351.3846154[/tex]

4658 has four significant figures.

     13 has two significant figures.

You must round to two significant figures.

That is, you drop all the digits to the right of the 5 — the red line in Fig. 1 below. You are rounding to the nearest ten.

To round a number to the nearest ten, you look at the number in the ones place (1). See Fig. 2.

If the number to be dropped — the digit in the ones place — is less than 5, you drop the digit in the ones place (Fig. 3). It becomes a zero.

The number in the tens place is a trailing zero. It is not significant.

[tex]\text{The quotient of $\dfrac{4658}{13}$ is $\large \boxed{\mathbf{350}}$}[/tex]

Answer:

Force=mass ×acceleration.

20=10×acceleration.

20=10a.

a=2m/s^2.