Which statement is the best interpretation of the ray diagram shown?

Answer:

Furthermore, the Pythagorean theorem works when the two added vectors are at right angles to one another - such as for adding a north vector and an east vector.

Answer:

Elements in the same group have the same number of valence electrons.

When moving right across a period, the valence electrons of the main group elements increase by one.

When moving down a group, the valence electrons of the main group elements increase by one.

Elements in the same period have the same number of valence electrons.

Elements in the same period of the periodic table have valence electrons in the same energy levels.

When elements are in the same period on the periodic table, it means that they have the same number of shells.

The energy level of valence electrons in a atom depends on how far it is from the nucleus. This means that:

For instance, Boron, Carbon and Nitrogen will have valence electrons in the same energy levels.

In conclusion, elements in the same period will have valence electrons in the same energy levels.

Find out more at https://brainly.com/question/21367069.

my views

Explanation:

Figure (8) shows a rod made up of copper and wood joined together. The rod is heated at the joint in the centre for about a minute. At which point – A, B, C or D, would it show the lowest temperature? PLEASE GIVE REASONS ALSO(MINIMUM 2)

Answer:

Decrease

Explanation:

The pressure is the force per unit area. So, P=F/A

Thus the pressure P is inversely proportional to contact area A.

So when area increases , the pressure will be decreasing.

Longitudinal waves

Transverse waves

Electromagnetic Waves

Water waves

Rope waves

LIght Waves

Answer:

Pascal is a derived unit because it cannot be expressed in any physics terms, but it is an expression of fundamental quantities.

Explanation:

[tex]{ \sf{Pasacal \: ( Pa) = \frac{newtons}{metres {}^{2} } }} \\ \\ { \sf{Pasacal \: (Pa) = \frac{kg \times {ms}^{ - 2} }{ {m}^{2} } }}[/tex]

The magnitude (size or numerical value) and the direction.

Hope this helps!!! :)

Answer:

hi

Explanation:

pls mark as a BRAINLIST

Answer:

2.5 m

Explanation:

Potential energy is the energy stored in an object as a result of its position relative to other objects

The change in potential energy is given by:

ΔPE = mgh;

where ΔPE is the change in potential energy, m is the mass if the object, g is the acceleration due to gravity and h is the change in height of the object.

Hence given that g = 10 m/s², ΔPE = 150 J, m = 6 kg, hence:

ΔPE = mgh

150 = 6 * 10 * h

150 = 60h

h = 2.5 m

Hence the change in height is 2.5 m

Answer:

The net force is 91780.8 N.

Explanation:

mass, m = 8950 kg

Radius, R = 9.33 miles = 15015.2 m

Time, T = 0.123 h = 442.8 s

There are two forces acting on the plane.

Horizontal force is the centripetal force and the vertical force is the weight.

[tex]Fx =m R w^2\\\\Fx = m R \frac{4\pi^2}{T^2}\\\\Fx = 8950\times 15015.2\times \frac{4\times 3.14\times 3.14}{442.8\times 442.8}\\\\Fx = 27030.8 N \\\\Fy = m g \\\\ Fy = 8950\times 9.8 \\\\Fy = 87710 N[/tex]

The net force is

[tex]F = \sqrt{Fx^2 + Fy^2}\\\\F = \sqrt {27030.8^2 + 87710^2}\\\\F = 91780.8 N[/tex]

Tomando en cuenta la Ley de Charles y la condiciones dentro del recipiente, tenemos las siguientes conclusiones con respecto al volumen del recipiente:

1) El volumen inicial del gas es 144.203 mililitros.

2) El volumen final del gas es 386.986 mililitros.

La Ley de Charles establece que el Volumen de un gas es directamente proporcional a su Temperatura, basados en este hecho, podemos resolver los problemas en cuestión mediante la siguiente relación matematica:

[tex]\frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}[/tex] (1)

Donde:

[tex]V_{1}[/tex] - Volumen inicial, en mililitros.

[tex]V_{2}[/tex] -  Volumen final, en mililitros.

[tex]T_{1}[/tex] - Temperatura inicial, en Kelvin.

[tex]T_{2}[/tex] - Temperatura final, en Kelvin.

1) Si sabemos que [tex]V_{2} = 150\,mL[/tex], [tex]T_{2} = 388.15\,K[/tex] and [tex]T_{1} = 373.15\,K[/tex], entonces el volumen inicial del gas es:

[tex]V_{1} = \frac{T_{1}}{T_{2}}\times V_{2}[/tex]

[tex]V_{1} = \frac{373.15\,K}{388.15\,K}\times 150\,mL[/tex]

[tex]V_{1} = 144.203\,mL[/tex]

El volumen inicial del gas es 144.203 mililitros.

2) Si sabemos que [tex]T_{1} = 473.15\,K[/tex], [tex]V_{1} = 350\,mL[/tex] and [tex]T_{2} = 523.15\,K[/tex], entonces el volumen final del gas es:

[tex]V_{2} = \frac{T_{2}}{T_{1}}\times V_{1}[/tex]

[tex]V_{2} = \frac{523.15\,K}{473.15\,K}\cdot 350\,mL[/tex]

[tex]V_{2} = 386.986\,mL[/tex]

El volumen final del gas es 386.986 mililitros.

He aquí una pregunta relacionada con la Ley de Charles: https://brainly.com/question/21184611

Answer:

any person who opens the door he applies pulling force

Answer:

lemon

Explanation:

the lower the number the hier hydrogen ions

Answer: B

Explanation:

Answer:

a). Silver, Ag

b). Iron, Fe

c). Copper, Cu

d). Aluminium, Al

e). Gold, Au

Answer:

gsbddgshdhsghhdhdhvvs

Answer:

Explanation:

A plane mirror is the kind you look into when you look into a "regular" mirror. The image you see is right-side-up. These images are virtual. Real images are always upside down and are made by mirrors that are "parabolic" in shape. Virtual images are always right-side-up.

Answer:

Snth = u + a/2 ( 2n - 1)

Explanation:

Do you need explanation based on graph, integration or other method?

Almost 3 times fast than normal pulley system

mark me

Answer:

Explanation:

We first need to convert the 40 km/h to m/s. Going by the fact that 40 has only 1 significant figure in it, 40 km/h = 10 m/s. The rest of the values are in their proper labels. We will use the equation:

[tex]v^2=v_0^2+2a[/tex]Δx where the final velocity is 0 because the car is coming to a stop at the end; the initial velocity is 10 m/s, the acceleration (or, rather, deceleration) is -.5 m/s/s, and our unknown which is displacement. Filling in:

[tex]0=(10)^2+2(-.5)[/tex]Δx and solving for Δx:

Δx = [tex]\frac{-100}{2(-.5)}[/tex] which ends up being simply that

Δx = 100 m

7351.35Hz

f0= v-Vo/v-Vs × FSA

= 340-0 /340+30 ×8000

= 340/370× 8000

= 7351.35hz

Answer:

It means that person can do work or can posses energy at a rate of 550 watts.

Or : can posses energy of 550 joules in one second.

Explanation:

[tex]{ \bf{power = \frac{work}{time} }}[/tex]

Radiation is energy that comes from a source and travels through space at the speed of light. This energy has an electric field and a magnetic field associated with it, and has wave-like properties. You could also call radiation “electromagnetic waves”.

cdc

Answer:

Wait until the end of the semester to complete all work.

Explanation:

this is the obvious answer.

please mark me brainliest

Answer:

Wait until the end of the semester to complete all work

Answer:

Density is directly proportional to pressure

Explanation:

As pressure increases (with constant temperature), density also increases.

Density is inversely proportional to temperature.

[tex]\boxed{\sf W=Fscos\Theta}[/tex]

[tex]\\ \sf\longmapsto W=150(50)cos 60[/tex]

[tex]\\ \sf\longmapsto W=7500\times \dfrac{1}{2}[/tex]

[tex]\\ \sf\longmapsto W=3750J[/tex]

Answer:

The separation between the two stones is 36 m, when the second stone is approximately 10.9 m below the top of the cliff

Explanation:

The given parameters are;

The height of the cliff from which the stones are dropped, h = 60 m

The time at which the second stone is dropped = 1.6 seconds after the first

The distance below the top of the cliff when the distance between the two stones is 36 m = Required

We have;

The kinematic equation of motion that can be used is s = u·t - (1/2)·g·t²

For the first stone, we have, s₁ = u·t₁ - (1/2)·g·t₁²

For the second stone, we get; s₂ = u·t₂ - (1/2)·g·t₂²

t₁ = t₂ + 1.6

g = The acceleration due to gravity ≈ 9.81 m/s²

s = The distance below the cliff top

The initial velocity of the stones, u = 0

Let t represent the time from which the second stone is dropped at which the distance between the two stones is 36 m, we have;

s₁ = u·(t + 1.6) + (1/2)·g·(t + 1.6)²

s₂ = u·t + (1/2)·g·t²

u = 0

∴ s₁ - s₂ = 36 =  (1/2)·g·(t + 1.6)² - (1/2)·g·t²

2 × 36/(g) = (t + 1.6)² - t²  = t² + 3.2·t + 2.56 - t² = 3.2·t + 2.56

2 × 36/(9.81) = 3.2·t + 2.56

t = (2 × 36/(9.81) - 2.56)/3.2 =  ≈ 1.49 s

t ≈ 1.49 s

s₂ = (1/2)·g·t²

∴ s₂ = (1/2) × 9.81 × 1.49² ≈ 10.9

The distance below the top of the cliff of the second stone when the the separation between the two stones is 36 m, s₂ ≈ 10.9 m.

Doppler frequency, the other car hear before they pass each other is 668.68 Hz.

Frequency is the number of occurrences of a repeating event per unit of time.

The Doppler effect is the change in frequency of a wave in relation to an observer who is moving relative to the wave source.

According to the Doppler Effect, the frequency observed is

  [tex]fo=fs\frac{v+v_{o} }{v-v_{s} }[/tex]

[tex]f_{o}=595\frac{343+20 }{343-20 }\\f_{o} = 668.68 Hz[/tex]

To know more about Doppler Effect here

https://brainly.com/question/15318474

#SPJ2

Explanation:

string roller is called an example of wheel and axel because The thin rod which needs to be turned is called the axle and the wider object fixed to the axle, on which we apply force is called the wheel.

hence the we apply force on the roller and the string gets tight.

Answer:

Explanation:

By being close to an atom that will gladly take the electrons being offered.

Suppose you are talking about Be. It is in the second column. It has two outer electrons that can be given away. It will not give away one of the two remaining electrons because they are too close to the + nucleus.

Along comes a Fluorine atom. It has 7 electrons in its outer ring. The chemistry of the situation allows it to take on one of the two electrons Be is offering. It is all a matter of charges and attractions.

Another Fluorine atom will take on the remaining electron from the Be. The outer ring cannot take on more than 1 electron, but that is enough

The hydro power plant consists of a (artificial) dam that builds gravitational potential energy, P.E. from natural flowing water sources, by locating the dam along the water path. The stored potential energy, P. is converted into kinetic energy, K.E. as the water falls from the dam, down to the turbines, located at a much lower level according to the following principle of conservation of energy equation;

Total Mechanical Energy, M.E. = The potential energy of the water, P.E. + The kinetic energy of the water, K.E. = Constant

M.E. = P.E. + K.E. = Constant

Where;

P.E. = m·g·h

K.E. = (1/2)·m·v²

m = Mass

g = The acceleration due to gravity

h = The height of the dam

v = The velocity

The charts can be explained as follows;

Given that the potential energy P.E. = m·g·h, we have that the potential energy is directly proportional to the height of the dam, and therefore, at mid height, the potential energy would be half the maximum value, and we have;

At mid height, P.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex]

At the top of the dam, the (vertical) velocity of the water = 0, therefore, the kinetic energy = 0

Therefore, at the top of the dam, we get;

M.E. = [tex]P.E._{max}[/tex] + 0 =

M.E. = [tex]\mathbf{P.E._{max}}[/tex]

Similarly, at the bottom of the dam, the height, h = 0, therefore, being proportional to the height, P.E. = 0, and the velocity is maximum, and at the bottom, we have;

M.E. = 0 + [tex]K.E._{max}[/tex]

The first chart, water is halfway down the dam

At the halfway down therefore, we have;

P.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex]

M.E. = [tex]P.E._{max}[/tex] = (1/2)·

∴ K.E. = [tex]P.E._{max}[/tex] - (1/2)·

Therefore the first chart, water is halfway down the dam;

Halfway, K.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex] = P.E.

∴ K.E. = P.E.  as shown on the chart

The second chart, water has reached the turbine

Water reaches the turbine at the bottom, and as explained above, we get;

M.E. = 0 + [tex]K.E._{max}[/tex]

∴ M.E.≈ [tex]K.E._{max}[/tex]

Therefore, when water has reached the turbine at the bottom of the dam, the kinetic energy is approximately proportional to the total mechanical energy as shown in the chart

The third chart, water is at the top of the dam

Here as shown above, we have;

The total mechanical energy, M.E. ≈ [tex]\mathbf{P.E._{max}}[/tex] as shown on the chart

Learn more about potential and kinetic energy here;

https://brainly.com/question/18683052