Answer:
The thrown football has Potential or stored Energy, PE, by virtue of its position in the air and the ability for it to fall by itself. The thrown football also has Kinetic Energy, KE, given that the ball is in motion and requires an equal and opposite amount of energy to stop it. Both the PE and the KE are forms of Mechanical Energy, ME and the Mechanical Energy of the football is equal to the sum of its Potential and Kinetic Energy. That is ME = PE + KE
Explanation:
Potential energy, PE, is the energy that is the held or stored energy of a body such that the body is able to do work without the addition of energy from an external source
A thrown football that has an elevation or height above the floor level has the capacity to come back down and bounce on the floor without the presence of assistance at the topmost height of the football. Therefore, the thrown football has potential energy, given to it by the thrower
Kinetic Energy, KE, is the energy possessed by a moving that comes from the motion of the object
Given that the thrown football is in motion, it posses kinetic energy
Therefore, the thrown football possesses both potential energy and kinetic energy which are forms of mechanical energy ME
The combined energy of the football is therefore called the Mechanical Energy ME of the ball which is the sum of the potential and kinetic energies of the football, given as follows;
The Mechanical Energy of the football = The Potential Energy of the football + The Kinetic Energy of the football
∴ ME = PE + KE
Nore ordered an ice cream cone.
Answer:
okay
Explanation:
okay
Answer:
Cool
Explanation:
A red 120 kg bumper car moving at 4 m/s collides with a green 100 kg bumper car moving at 3 m/s. The red bumper car bounces off at 2 m/s. What is the green car's final velocity?
A car travels 14 km due west, then does a
U-turn, and travels 43 km due west.
I. What total distance has the car
traveled?
II.
What is the total displacement of the
car?
III. If the entire trip took 3.20 hours.
determine the average speed of the
car. Give
your answer in both
km hour, and m s. (show
conversion)
IV. If the entire trip took 2.50 hours.
determine the average velocity of
the car. Give your answer in both
km h, and mph (show conversion)
Explanation:
It is given that,
A car travels 14 km due west, then does a U-turn and travels 43 km due east (when it takes U-turn, it will change direction from west to east)
i. Total distance = total path covered
= 14 km + 43 km
= 57 km
ii. Let east is positive and west is negative.
Displacement = final position-initial position
= 43-14
= 29 km
iii. If time taken in the entire trip = 3.2 hours
Average speed = distance/time
[tex]s=\dfrac{57\ km}{3.2\ h}\\\\=17.81\ km/h[/tex]
1 km/h = 0.2777 m/s
17.81 km/h = 4.94 m/s
iv. If time taken in the entire trip = 2.5 hours
Average velocity = displacement/time
[tex]v=\dfrac{29\ km}{2.5\ h}\\\\=11.6\ km/h[/tex]
1 km/h = 0.621 mph
11.6 km/h = 7.2 mph
Henc, this is the required solution.
I mon runs a distance of 10km in 5 ms
he overage speed
Note: Your question inputs seem a little odd. But, I am assuming that you really mean '10km in 5 ms'.
Answer:
The Average speed = 15000 / 0.005 = 3000000 m/s
Explanation:
Average speed can be calculated by dividing the total distance covered by the total time.
Average speed = Total Distance / Total time
Given
Total distance = 15km = 15(1000) = 15000 m Total time = 5 ms = 0.005 seconds
Thus,
Average speed = Total Distance / Total time
Average speed = 15000 / 0.005 = 3000000 m/s
What is the matter made of
Answer:
Matter is made of atoms which are in turn made up of protons, nuetrons and electrons. Atoms come together to form molecules which is the building block for all matter.
Explanation:
I feel like this question is like What is the meaning of life. Matter is made up of Matter. i don't know man
A 0.17 kg ball of dough is thrown straight up into the air with an initial speed of 12 m/s. The acceleration of gravity is 9.81 m/s 2 . a) What is its momentum at its maximum height? Answer in units of kg · m/s
Answer:
The momentum of the ball at the maximum height is zero (0 kg.m/s).
Explanation:
Given;
mass of the ball, m = 0.17 kg
initial velocity of the ball, u = 12 m/s
acceleration due to gravity, g = 9.81 m/s²
At maximum height the final velocity of the ball, v = 0
Momentum of the ball at the maximum height is given as;
P = mv
P = (0.17)(0)
P = 0 kg.m/s
Therefore, the momentum of the ball at the maximum height is zero (0).
When you push a box with 20 N of force, what force does the box apply back on you?
Bob can run the 100 meter dash in 25 seconds. What is his speed?
Answer:
4 meters a second
Explanation:
100/25
plzz mark brainiest
who is the prime minister of bangladesh ???
Answer:
Sheikh Hasina is the prime minister of Bangladesh.
Answer:
her name is Sheikh Hasina
a lift travelling up to the top floor of the empire state building with a mass of 4200kg and a kenetic energy of 4116 J
Though the question does not ask for anything, I'll assume you need to calculate the speed of the lift.
Answer:
The lift travels at 1.4 m/s
Explanation:
Kinetic Energy
Is the type of energy of an object due to its state of motion. It's proportional to the square of the speed and the mass.
The equation for the kinetic energy is:
[tex]\displaystyle K=\frac{1}{2}mv^2[/tex]
Where:
m = mass of the object
v = speed at which the object moves
The kinetic energy is usually expressed in Joules (J)
If we already know the value of the kinetic energy, we can find the speed by solving for v:
[tex]\displaystyle v=\sqrt{\frac{2K}{m}}[/tex]
The lift has a mass of m=4200 Kg and has a kinetic energy of K=4116 J, thus it's moving at a speed of:
[tex]\displaystyle v=\sqrt{\frac{2*4116}{4200}}[/tex]
[tex]\displaystyle v=\sqrt{1.96}[/tex]
v = 1.4 m/s
The lift travels at 1.4 m/s
I WILL GIVE BRAINLIEST IF SOMEONE GETS THIS......
A eureka can of mass 100g and cross-section area 100cm2 is filled with water of density 1g/cm3. A piece of metal of mass 20g and density 8g/cm3 is lowered into the can. ( height of can 10cm ) calculate:
a) the total mass of can before the metal was lowered.
b) the volume of water that overflowed
c) the final mass of can and its content
Answer:
Explanation:
a)
Firstly to calculate the total mass of the can before the metal was lowered we need to add the mass of the eureka can and the mass of the water in the can. We don't know the mass of the water but we can easily find if we know the volume of the can. In order to calculate the volume we would have to multiply the area of the cross section by the height. So we do the following.
100[tex]cm^{2}[/tex] x 10cm = 1000[tex]cm^{3}[/tex]
Now in order to find the mass that water has in this case we have to multiply the water's density by the volume, and so we get....
[tex]\frac{1g}{cm^{3} }[/tex] x 1000[tex]cm^{3}[/tex] = 1000g or 1kg
Knowing this, we now can calculate the total mass of the can before the metal was lowered, by adding the mass of the water to the mass of the can. So we get....
1000g + 100g = 1100g or 1.1kg
b)
The volume of the water that over flowed will be equal to the volume of the metal piece (since when we add the metal piece, the metal piece will force out the same volume of water as itself, to understand this more deeply you can read the about "Archimedes principle"). Knowing this we just have to calculate the volume of the metal piece an that will be the answer. So this time in order to find volume we will have to divide the total mass of the metal piece by its density. So we get....
20g ÷ [tex]\frac{8g}{cm^{3} }[/tex] = 2.5 [tex]cm^{3}[/tex]
c)
Now to find out the total mass of the can after the metal piece was lowered we would have to add the mass of the can itself, mass of the water inside the can, and the mass of the metal piece. We know the mass of the can, and the metal piece but we don't know the mass of the water because when we lowered the metal piece some of the water overflowed, and as a result the mass of the water changed. So now we just have to find the mass of the water in the can keeping in mind the fact that 2.5[tex]cm^{3}[/tex] overflowed. So now we the same process as in number a) just with a few adjustments.
[tex]\frac{1g}{cm^{3} }[/tex] x (1000[tex]cm^{3}[/tex] - 2.5[tex]cm^{3}[/tex]) = 997.5g
So now that we know the mass of the water in the can after we added the metal piece we can add all the three masses together (the mass of the can. the mass of the water, and the mass of the metal piece) and get the answer.
100g + 997.5g + 20g = 1117.5g or 1.1175kg
tarzans mass is 75kg. calculate his weight
Answer:
75kg=165.346697lbs
Explanation: F A T
A block is released from rest at the top of a hill of height h. If there is negligible friction between the block and the hill, the block arrives at the bottom of the hill with speed v.
Answer:
v / √2
Explanation:
A blocked from rest at the top of a hill of height h it there is negligible friction between the block and the hill, the block arrives at the bottom of the hill with speed. The block is released from rest at the top of another hill with a rough surface and height h. if one-half of the initial mechanical energy of the block Earth System is lost due to friction as the block descends the hill, the block will reach the bottom of the hill with a speed of?
Solution:
For the first block block, its potential energy at the top of the hill when it is at rest is converted to kinetic energy after release with a velocity v.
The kinetic energy = (1/2)mv², where m is the mass of the block.
For the other block placed on the top of the rough hill, the mechanical energy (kinetic energy) is halved due to the roughness of the hill. If u is the speed of this block at the bottom of the hill then:
kinetic energy of block on the rough hill = (1//2)mu²
Hence:
(1//2)mu² = half of main system kinetic energy
(1//2)mu² = 1/2 * (1/2)mv²
mu² = (1/2)mv²
u² = (1/2)v²
u = √(v²/2)
u = v / √2
Hence the speed at the bottom of the rock of the block placed on the rough surface is v / √2
18. Which would be the most reliable source of information to use for a history report? (2 points)
O An encyclopedia
O A magazine article
O A newspaper
A TV show
Answer:
encyclopedia most reliable I think
A driver of a car traveling at 15.0 m/s applies the brakes, causing a uniform acceleration of -2.0 m/s squared. How long does it take the car to accelerate to a final speed of 10.0 m/s? How far has the car moved during the braking period?
Answer:
a) 2.5secs
b) 31.25m
Explanation:
a) From the question, we are given;
Initial speed u = 15m/s
Final speed v = 10.0m/s
Acceleration =-2.0m/s²
Required
How long it takes take the car to accelerate (Time t)
Using the equation of motion
v = u+ at
10 = 15+(-2)t
10 = 15-2t
10-15 = -2t
-5 = -2t
t = 5/2
t = 2.5secs
Hence it takes the car 2.5secs to accelerates.
b) We are to find distance S
Using the equation
S = ut + 1/2at²
S = 15(2.5)+1/2(-2)(2.5)²
S = 37.5-6.25
S = 31.25m
Hence the car as moved by 31.25m during the breaking period.
Hiii I think the answer might be 3.3 seconds,not exaclty sure tho
Karla Ayala pulls a sled on an icy road (dangerous!). Because of Karla's pull, the tension force is 151 N, and the rope makes a 20.0° with the horizontal. If the 7.0-kg sled is pulled across 10.0 meters, what is the work done by Karla?
Answer:
W = 1418.9 J = 1.418 KJ
Explanation:
In order to find the work done by the pull force applied by Karla, we need to can use the formula of work done. This formula tells us that work done on a body is the product of the distance covered by the object with the component of force applied in the direction of that displacement:
W = F.d
W = Fd Cosθ
where,
W = Work Done = ?
F = Force = 151 N
d = distance covered = 10 m
θ = Angle with horizontal = 20°
Therefore,
W = (151 N)(10 m) Cos 20°
W = 1418.9 J = 1.418 KJ
6th grade science I mark as brainliest.
Answer:
divide 10 by 50.
Explanation:
Because its time over speed 10/50
5 meter/ second
I think it's helpful
follow me and don't forget to Mark me as brainlist please
A fish that lives near the surface of the ocean most likely has a swim bladder (or a body cavity) that is full of
Answer:
A fish that lives near the surface of the ocean most likely has a swim bladder (or body cavity) that is full of oxygen
Explanation:
The swim bladder is the organ present in the majority of bony fishes that provides buoyancy. The swim bladder is a bladder filled with oxygen and found in the in the body of the fish
The function of the swim bladder is to provide adequate ballast or hydrostatic balance to enable a fish to keep to a certain depth in a body of water thereby the fish does not float to the surface or sinks further
The swim bladder is also used as a sound communicating organ.
4. A Ferrari travels 350km in 2 hours. What was it's
s speed?
A 0.85-kg arrow flies through the air at a speed of 19 m/s. What is the momentum of the arrow?
16 kg m/s
22 kg m/s
160 kg m/s
360 kg m/s
Answer:
16 kg m/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocity
From the question we have
momentum = 0.85 × 19 = 16.15
We have the final answer as
16 kg m/sHope this helps you
A child kicks a ball horizontally with a speed of 4.8 m/s off a deck 3.5 m off the ground. How far, in meters, from the deck does the ball land on the ground?
Answer:
2.605m
Explanation:
Using the formula for calculating Range (distance travelled in horizontal direction)
Range R = U√2H/g
U is the speed = 4.8m/s
H is the maximum height = ?
g is the acc due to gravity = 9.8m/s²
R = 3.5m
Substitute into the formula and get H
3.5 = 4.8√2H/9.8
3.5/4.8 = √2H/9.8
0.7292 = √2H/9.8
square both sides
0.7292² = 2H/9.8
2H = 0.7292² * 9.8
2H = 5.21
H = 5.21/2
H = 2.605m
Hence the height of the ball from the ground is 2.605m
Please do all of i will give you brainlest and thanks to best answer plz do it right
Answer:
winter solstice i think
Explanation:
Answer:
a/ solar eclipse
Explanation:
because the moon is on the left side of earth
Which type of energies make up the mechanical energy of a roller coaster moving along a track?
Answer:
gravitational potential energy and kinetic energy
Explanation:
Thermal energy can not be transferred or transformed into other forms of energy.
O True
False
Answer:
I believe it is false I took the test
Answer:
false
Explanation:
why does diamond sparkles stars twinkles?
Answer:
Because they want attention
which apparatus Is used to determine the volume of a small block of unknown material
Options are;
A: measuring cylinder, metre rule
B: measuring cylinder, stopwatch
C: metre rule, balance
D: metre rule, stopwatch
Answer:
A: measuring cylinder, metre rule
Explanation:
Usually, when measuring volume of a small material, we make use of a piece of laboratory apparatus known as measuring cylinder which is also known as graduated cylinder.
Since it is a graduated cylinder, it means we will make use of metre rule.
Thus, the correct option is option A.
The apparatus which can be used to determine the volume of a small block of unknown material is: measuring cylinder; meter rule.
A measuring cylinder can be defined as a graduated cylinder that is typically designed and developed for the measurement of the volume of an irregularly shaped piece of object or a small block of unknown material.
Basically, a measuring cylinder is typically marked with horizontal lines on its side as units of measurement for volume.Similarly, a meter rule refers to an apparatus that is used for the measurement of the length of an object.
Hence, the meter rule would be used in measuring the length, width and height of the small block of unknown material, in order to determine its volume while using this formula:[tex]Volume =length\times width \times height[/tex]
Read more: https://brainly.com/question/19223428
100 points if u help me and get it right this needs to be done in 3 min hurry to get ur 100 points
Calculate the kinetic energy of a 50 kg cart moving at a speed of 6.9 m/s.
Answer:
35
Explanation:
c7z ya boiiiiiiiiiiiiiiiiii
Will mark brainiest!!!
1. A __ is caused by a sudden shift in the ocean crust which displaces the water. *
2. A tsunamis is possible, but unlikely at a __ plate boundary where two plates are moving sideways past each other. *
3. A Shallow __ is a good indicator of tsunamis, but sends data very slowly and cannot detect earthquakes. *
4. Tsunamis are common at __ plate boundaries, since large earthquakes release the built up pressure, resulting in a quick vertical movement of the plate. *
5. The Indonesian Earthquake of 2004 had a 9.1__, which was the third largest ever recorded in human history. *
All possible answers:
A. Earthquake
B. Tsunami
C. Magnitude
D. Sensor
E. Transform
F. Convergent
G. Divergent
Answer:
1. Tsunami
2.Divergent
3.Sensor
4.Convergent
5.Magnitude
Explanation:
an object increases its velocity from 22 m/s to 36 m/s in 5s.what is the acceleration of the object
Answer:
2.8 m/s²
Explanation:
v=v0+at <=> 36 = 22 + a×5 <=> 5a = 36-22 <=> 5a = 14 <=> a = 14/5 <=>
<=> a = 2.8 m/s²
HELP PLZZZ!!!! Hurry
3. What does doubling the number of coils do to the strength of the electromagnet?
4. What does doubling the voltage do to the strength of the electromagnet?
5. Using the graph, predict how many paper clips a 7.5 V battery would pick up for both the 25-
coil electromagnet and the 50-coil electromagnet.
6. Calculate the slope of the 25-coilline and the 50-coil line to determine the average number of
paper clips that a 1 V battery would pick up.
Answer:
3. When the number of turns, N is doubled, the strength of the electromagnet is also doubled
4. Doubling the voltage, doubles the strength of the electromagnet
5. The number of paper clips a 7.5 V battery would pick is approximately 28 paper clips
The number of paper clips a 7.5 V battery would pick is 59 paperclips
6. For the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick is approximately 7 paperclips
For the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick is 16 paperclips
Explanation:
3. The Magnetomotive Force, MMF = The Number of Turns on the Coil, N × The Current I Flowing in the Coil, I
∴ MMF = N × I
When the number of turns, N is doubled, the magnetomotive force, MMF is also doubled, and the strength of the electromagnet is doubled
4. Given that the voltage, V applied to the coil = The current, I flowing × The resistance, R of the coil, we have
V = I × R
Therefore, for a given constant resistance in the coil, doubling the voltage, doubles the current and therefore doubles the strength of the electromagnet
5. The average slope for the 25-coil electromagnet = (23 - 12)/(6 - 3) = 3.[tex]\bar 6[/tex]
The number of paper clips a 7.5 V battery would pick = 12 + (7.5 - 3) × 11/3 = 28.5 paperclips ≈ 28 paper clips
The average slope for the 50-coil electromagnet = (48 - 26)/(6 - 3) = 7.[tex]\bar 3[/tex]
The number of paper clips a 7.5 V battery would pick = 26 + (7.5 - 3) × 22/3 = 59 paperclips
6. The slope calculated from a start point of approximately 0.4 V, is given as follows;
The slope for the 25-coil electromagnet = (12 - 6)/(3 - 0.4) = 30/13
Therefore, for the 25-coil electromagnet, the average number of paper clips a 1 V battery would pick = 6 + (1 - 0.4) × 30/13) = 96/13 ≈ 7 paperclips
The slope for the 50-coil electromagnet = (26 - 13)/(3 - 0.4) = 5
Therefore, for the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick = 13 + (1 - 0.4) × 5 = 16 paperclips
3. When the number of revolutions, N, is twice, the electromagnet's strength is doubled as well.
4. Doubling the voltage doubles the electromagnet's strength.
5. The number of paper clips selected by a 7.5 V battery is 59.
6. For a 50-coil electromagnet, a 1 V battery would pull up around 7 paperclips on average. The average number of paper clips picked by a 1 V battery for a 50-coil electromagnet is 16 paperclips.
What is electromagnet?The magnetic field of an electromagnet is created by an electric current. Electromagnets are caused from conducting wire wriggled into a coil.
A magnetic field is created in the hole by a current passing through the wire.
The magnetic field production is increased by;
1) increasing the number of turns
2) increase the area of the loop
3) by moving the magnet faster
Answer for the following given options as follows;
3. When the number of revolutions, N, is twice, the electromagnet's strength is doubled as well. Because the no of coils in the circuit is directly proportional to the strength of electromagnet.
4. From the ohm's law principal doubling the voltage twice the current and hence the electromagnet's strength for a given constant resistance in the coil increases.
5. For the 25-coil electromagnet, the average slope is ;
[tex]\rm m_{avg}= \frac{23-12}{6-3} \\\\ m_{avg}= 3[/tex]
The number of paper clips selected by a 7.5 V battery is;
[tex]\rm n = 12+ (7.5-+3)\times \frac{11}{3}\\\\n = 28.5[/tex]
For the 50-coil electromagnet, the average slope;
[tex]\rm (m_{avg})_{50}= \frac{48-26}{6-3} \\\\\ \rm (m_{avg})_{50}= 7[/tex]
The number of paper clips selected by a 7.5 V battery is;
[tex]\rm N = 26+(7.5-3) \times \frac{22}{3} \\\\ N= 59[/tex]
The following is the slope determined from a starting position of around 0.4 V:
For the 25-coil electromagnet, the slope is;
[tex]\rm m_{25}=\frac{12-6}{3-0.4} \\\\\ m_{25}=\frac{6}{2.6} \\\\ m_{25}=\frac{30}{13}[/tex]
As a result, the average number of paper clips a 1 V battery would choose for the 25-coil electromagnet is;
[tex]\rm N_{25}=6+ (1-0.4)\times \frac{30}{13} \\\\ N_{25}=\frac{96}{13} \\\\ N_{25}= 7 \ paperclip[/tex]
For the 50-coil electromagnet, the slope is;
(26 - 13)/(3 - 0.4) = 5.
As a result, the average number of paper clips picked by a 1 V battery is;
[tex]\rm N'_{50}= 13+ (1-0.14)\times 5 \\\\ N'_{50}=16[/tex]
Hence,the average number of paper clips picked by a 1 V battery for a 50-coil electromagnet is 16 paperclips.
To learn more about the electromagnets, refers to the link:
https://brainly.com/question/23727978
#SPJ5
