Answer
Incidentally, they all form dew but because grass is closer to the soil, which maintains heat longer than the air where tree leaves are found, you will find more condensation in that region. Also, higher up the wind and sun will allow faster evaporation which makes the dew less noticable on tree leaves.
Explanation:
Preferred objects of dew formation are thus poor conducting or well isolated from the ground, and non-metallic, while shiny metal coated surfaces are poor infrared radiators. ... If the wet soil beneath is the major source of vapor, however (this type of dew formation is called distillation), wind always seems adverse.
11.
A sample of TNT, C-H5N306, has 7.30 1021 nitrogen atoms. Determine the numbers of
hydrogen atoms in this sample of TNT.
021
Answer:
1.22 × 10^22 H atoms
Explanation:
From this question, TNT has the chemical formula: C-H5N306. The number of nitrogen atoms in the TNT substance is said to be 7.30 × 10^21 atoms.
The number of hydrogen atoms in the same TNT substance can be got using mole ratio. Based on the chemical formula, the mole ratio of hydrogen to nitrogen is 5:3 i.e. H5N3.
This means that;
Number of atoms of hydrogen = 5/3 of the number of atoms of nitrogen.
Hence, number of H atoms = 5/3 × 7.30 × 10^21
number of H atoms = (7.30 × 5/3) × 10^21
number of H atoms = (36.5/3) × 10^21
number of H atoms = 12.1666 × 10^21
number of H atoms = 1.2166 × 10^22 atoms.
Approximately, number of H atoms in TNT is 1.22 × 10^22 atoms.
What is an nucleus ?
Nucleus is present at the centre of atom. It contains protons and neutrons. It is very small as compared to the atom.
Answer:
It is a part of a cell which controls all the activities in the cells and contains the genetic information of the cell that is to be passed down to the next cell when it reproduces.
Explanation:
It is a part of a cell which controls all the activities in the cells and contains the genetic information of the cell that is to be passed down to the next cell when it reproduces.
When [H+] = 4.0 × 10–9 M in water at 25°C, then
Kw =1.0×10–14.
b. pOH = 7.
c. [H3O+] = [OH–].
d. pH= 7
e. A-D are all correct
Answer:
a. Kw = 1.0 × 10⁻¹⁴
Explanation:
a. Let's consider the self-ionization of water.
2 H₂O(l) ⇄ H₃O⁺(aq) + OH⁻
The ion-product of water (Kw) at 25 °C is:
Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴
c. Considering [H⁺] = [H₃O⁺] = 4.0 × 10⁻⁹ M, the concentration of OH⁻ is:
[OH⁻] = 1.0 × 10⁻¹⁴/[H₃O⁺] = 2.5 × 10⁻⁶ M
b. We can calculate the pOH using the following expression.
pOH = -log [OH⁻] = -log 2.5 × 10⁻⁶ = 5.6
d. We can calculate the pH using the following expression.
pH = -log [H⁺] = -log 4.0 × 10⁻⁹ = 8.4
When [H+] = 4.0 × 10–9 M in water at 25°C, then the [tex]Kw =1.0\times 10^-^1^4.[/tex]
What is dissociation constant?
Kw is the dissociation constant or ionization constant of water.
The self-ionization of water will be
[tex]\rm 2 H_2O(l) = H_3O^+(aq) + OH^-[/tex]
The dissociation constant of the water at 25°C will be
[tex]\rm Kw = [H_3O^+][OH^-] = 1.0 \times 10^-^1^4[/tex]
Thus, the correct option is a. [tex]Kw =1.0\times 10^-^1^4.[/tex]
Learn more about dissociation constant
https://brainly.com/question/3657057
what are 4 sources of electrical energy?
Answer:
Clean Energy. Learn more about energy from solar, wind, water, geothermal, biomass and nuclear. Fossil. Learn more about our fossil energy sources: coal, oil and natural gas.Electric Power. Learn more about how we use electricity as an energy source. Energy Storage. Hydrogen & Fuel Cells.Explanation:
I hope this helps xD
Answer:
Electrical energy is used to power up a light bulb. The current moves from the outlet to the light bulb through the wire.
Lightning is another example of electrical energy. The negatively charged particles are separated from the positively...
Batteries are also sources of electrical energy. In car batteries, the moving charges Explanation:
fI gave u 3 think of the 4th one
what is meant by the term quantitative?
A) number measurement
B) words & explanation
Answer:
a) number measurement
Explanation:
relating to, measuring, or measured by the quantity of something rather than its quality.
Answer:
number and measurement
Explanation:
Quantitative is an adjective that simply means something that can be measured. For example, we can count the number of sheep on a farm or measure the gallons of milk produced by a cow.
Based on periodic trends which atom has a larger ionization energy then calcium Ca?
Answer:
Gallium, Germanium, Arsenic, Selenium, Bromine and Krypton
Explanation:
Based on periodic trends, the atom that has a larger ionization energy than calcium are Gallium, Germanium, Arsenic, Selenium, Bromine and Krypton.
Across the period, the ionization energy increases from left to right.
Ionization energy is the energy required to remove the most loosely held electron within an atom. As you go from left to right, the ionization energy increases rapidly.The elements to the right of Ca will have a higher ionization energy compared to Ca.Write the balanced chemical equation between H2SO4 and KOH in aqueous solution. This is called a neutralization reaction and will produce whater and potassium sulfate. Phases are optional.
0.650 L of 0.430 M H2SO4 is mixed with 0.600 L of 0.240 M KOH. What concentration of sulfuric acid remains after neutralization?
Answer:
0.166M
Explanation:
In a neutralization, the acid, H₂SO₄, reacts with a base, KOH, to produce a salt, K₂SO₄ and water. The reaction is:
H₂SO₄ + 2KOH → K₂SO₄ + 2H₂O
To solve this problem, we need to determine moles of H2SO4 and moles of KOH that reacts to find the moles of sulfuric acid that remains after the reaction:
Moles H2SO4:
0.650L * (0.430mol /L) = 0.2795moles H2SO4
Moles KOH:
0.600L * (0.240mol / L) = 0.144 moles KOH
Moles of sulfuric acid that reacts with 0.144 moles of KOH are:
0.144 moles KOH * (1mol H2SO4 / 2 mol KOH) = 0.072 moles of H2SO4 react.
And remain:
0.2795moles H2SO4 - 0.072moles H2SO4 = 0.2075 moles of H2SO4 reamains.
In 0.650L + 0.600L = 1.25L:
Molar concentration of sulfuric acid:
0.2075 moles of H2SO4 / 1.25L =
0.166Mwhich formula represents a nonpolar molecule containing polar covelant bond
Answer: H2O and NH3 are polar molecules. H2 is a nonpolar molecule but the H-H bond is also nonpolar.
Therefore, the best choice is CCl4. Although the C-Cl bond is polar due to electronegativity differences, the molecule itself is nonpolar because the net dipole moments cancel out, given its tetrahedral molecular structure.
Explanation:
How many elements are in NaC2H302?
Calculate the amount of heat, in Joules, needed to raise 34.0g of water from 55.0°C to 76.0*C. The specific heat of water is 4.18 J/gºC.
Answer:
2984.52J
Explanation:
Using the formula: Q = m × c × ∆T
Where;
Q = amount of heat (in Joules)
m = mass (in grams)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
Based on the information provided in the question;
m = 34.0g
c = 4.18 J/gºC.
Initial temperature = 55.0°C
Final temperature = 76.0°C
Hence, Q = m × c × ∆T
Q = 34 × 4.18 × (76 - 55)
Q = 142.12 × 21
Q = 2984.52J
Therefore, 2984.52J is the amount of heat, in Joules, needed to raise 34.0g of the water.
Which of the following observations would be the expected indication that a reaction has taken place when a solution of cesium sulfate is mixed with strontium perchlorate.
Bubbling
Formation of percipitate
Formation of soluble salts
Formation of a gas
Answer:
Formation of precipitate
Formation of soluble salts
Explanation:
Let's consider the molecular equation that takes place when an aqueous solution of cesium sulfate is mixed with an aqueous solution strontium perchlorate.
Cs₂SO₄(aq) + Sr(ClO₄)₂(aq) ⇒ 2 CsClO₄(aq) + SrSO₄(s)
According to the solubility rules:
CsClO₄ is a soluble salt.SrSO₄ is an insoluble salt that precipitates as a solid.For a double displacement reaction to occur, at least one of the products must be insoluble or volatile.
Answer:
It's b) Formation of a precipitate
Explanation:
I took the quiz and got it right.
consider the reaction between acetylene C2H2 and oxygen in a welding torch 2C2H2 + 5O2 = 4CO2 + 2H2O of 5.4 moles of acetylene react with sufficient oxygen how many grams of CO2 should form
Answer:
C. 4.8*10² g.
Explanation:
.What does the changing the Aperture do when taking a photo? *
4.What effect can you get from using a slow shutter speed? *
5.What effect can you create by using a quick shutter speed?
Answer:
Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.
The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.
Explanation:
Four students rolled a ball down a slide on the play ground which ball has the greatest applied force
NEED HELP ASAP!!
(04.04 LC)
Which statement is true about the products of cellular respiration?
They contain oxygen.
They contain glucose.
They become the products of photosynthesis.
They become the reactants of photosynthesis.
Answer:
They contain oxygen
hope it helps
There are 20 mice in a 5 m2 field ecosystem. The population density of mice is _____.
20 per m 2
5 per m 2
25 per m 2
4 per m 2
Answer:
4per m 2
20 mice divided by 5 so it will be 4 per m 2
Use scientific notation to express the number 355000 to:
1) one significant figure
2) two significant figures
3) three significant figures
4) four significant figures
5) six significant figures
Answer:
1) 4*10^5
2) 3.6*10^5
3) 3.55*10^5
4) 3.550*10^5
5) 3.55000*10^5
Explanation:
1) 4 x [tex]10^5[/tex]
2) 3.6 x [tex]10^5[/tex]
3) 3.55 x [tex]10^5[/tex]
4) 3.550 x [tex]10^5[/tex]
5) 3.55000 x [tex]10^5[/tex]
What is scientific notation?A number is written in scientific notation when there is a number greater than or equal to 1 1 11 but less than 10 10 1010 multiplied by a power of 10 10.
Significant figures are the number of digits in a value, often a measurement, that contributes to the degree of accuracy of the value.
1) 4 x [tex]10^5[/tex]
2) 3.6 x [tex]10^5[/tex]
3) 3.55 x [tex]10^5[/tex]
4) 3.550 x [tex]10^5[/tex]
5) 3.55000 x [tex]10^5[/tex]
Learn more about scientific notation here:
https://brainly.com/question/18073768
#SPJ2
What else is produced when sodium carbonate decomposes?
Na2CO3 → Na2O + _________
Answer:
CO2
Explanation:
Which is a component of John Dalton’s atomic theory?
The ratio of atoms in a compound is fixed.
The atoms of different elements are the same.
An atom is a small particle of matter that can be broken down.
A reaction can create or destroy atoms as well as rearrange them.
Answer:
i think the answer is b
Explanation:
Please help with this question..thank you
Adaleigh is learning about renewable and non-renewable resources in her science class. She decides to take
a nature walk and makes notes of all the renewable resources that she sees. Which of the following is an
observation that Adaleigh could have made on her walk?
A. The seeds on the ground are going to grow into new trees.
B. The tallest trees had the most seeds around their bases.
C. When trees decay, they could eventually turn into coal.
D. Pine trees are older than oak trees.
Answer:
A. The seeds on the ground are going to grow into new trees.
Explanation:
Trees are renewable resources.
what coefficients used to balance chemical equation below? ___ Ag2O ----> ____ Ag + ___ O2
A 2,4,1
B 2,2,2
C 2,1,2
D 1,1,1
The coefficients used to balance the chemical equation given in the question are 2, 4, 1 (Option A)
What is a chemical equation?Chemical equations are representations of chemical reactions using symbols and formula of the reactants and products.
The reactants are located on the left side while the products are located on the right side.
Reactants —> Products
The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
How to balance the equationAg₂O —> Ag + O₂
There are 2 atoms of O on the right side 1 on the left. It can be balance by writing 2 before Ag₂O as shown below
2Ag₂O —> Ag + O₂
There are 4 atoms of Ag on the left side and 1 atom on the right side. It can be balance by writing 4 before Ag as shown below
2Ag₂O —> 4Ag + O₂
Now, the equation is balanced.
Thus, the coefficients are: 2, 4, 1
Learn more about chemical equation:
https://brainly.com/question/7181548
#SPJ2
Fe + CuCl2 → FeCl2 + Cu
The type of reaction represented by the above equation is -
decomposition
synthesis
single-replacement
double-replacement
Answer:
the type is single replacement
The given reaction equation represents a single-replacement reaction.
Explanation:
A chemical reaction is defined as the rearrangement of the atoms of a substance to give a new substance as a product.A decomposition reaction is a type of chemical reaction in which a substance breakdowns into two or more than two simpler substances.ABC→ A+B+C
A synthesis reaction is a chemical reaction in which two or more compounds are combined together to form a single compound.A+B+C → ABC
A single-replacement reaction is defined as the chemical reaction in which an element replaces another element from its compound.AB+ C → AC + B
A double-replacement reaction is defined as the chemical reaction in which ions of compounds are exchanged.AB+ CD → AC + BD
Given:
[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]
To find:
The type of chemical reaction represented by the given equation.
Solution:
In the given reaction:
[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]
Iron is replacing copper from its compound which is copper(II) chloride to give iron(II) chloride and copper as a product.
So from this, we can conclude that the given reaction equation represents a single-replacement reaction.
Learn more about types of chemical reactions here:
brainly.com/question/1071297?referrer=searchResults
brainly.com/question/12844777?referrer=searchResults
Your aunt is sipping on iced tea and fanning herself during a hot South Carolina summer day. You tell her that there is enough energy in one drop of her iced tea to run the air conditioner for the rest of her life if the energy could be extracted with 100% efficiency. Your aunt asks you to explain. Use the concepts you learned in this unit to explain the relationship between forces, energy, and matter.
Answer:
Isn't this like having enough energy to supply the world for centuries with just 1% of the sea's force?
Explanation:
I guess it's because the amount of energy in it can supply energy.
A 0.98 gram sample of a volatile liquid was heated to 348 k. the gas occupied 265 ml of space at a pressure of 0.95 atm. what is the molecular weight of this gas?
Answer:
The molecular weight is [tex]Z = 111.2 \ g/mol[/tex]
Explanation:
From the question we are told that
The mass of the sample is [tex]m = 0.98 \ g[/tex]
The temperature is [tex]T = 348 K[/tex]
The volume which the gas occupied is [tex]V = 265 \ ml = 265 *10^{-3} L[/tex]
The pressure is [tex]P = 0.95 \ atm[/tex]
Generally from the ideal gas equation we have that
[tex]PV = n RT[/tex]
Here n is the number of moles of the gas while the R is the gas constant with value [tex]R = 0.0821 \ atm \cdot L \cdot mol^{-1} \cdot K^{-1}[/tex]
[tex]n = \frac{PV}{ RT}[/tex]
=> [tex]n = \frac{ 0.95 * 265 *10^{-3} }{ 0.0821 * 348}[/tex]
=> [tex]n = 0.00881 \ mol[/tex]
Generally the molecular weight is mathematically represented as
[tex]Z = \frac{m}{n}[/tex]
=> [tex]Z = \frac{0.98 }{0.00881}[/tex]
=> [tex]Z = 111.2 \ g/mol[/tex]
What pH scale number represents a neutral.
What pH scale number represents a neutral.
The answer is 7
What is the mass of 1.00 mol of oxygen (O2)?
Answer:
Mass = 32 g
Explanation:
Given data:
Number of moles of oxygen = 1.0 mol
Mass of oxygen = ?
Solution:
Formula:
Number of moles = mass/molar mass
Molar mass of oxygen (O₂) is 32 g/mol
by putting values,
1.0 mol = mass/ 32 g/mol
Mass = 1.0 mol ×32 g/mol
Mass = 32 g
Name the alkyne please help!!
Answer:
4-ethylhex-2-yne
Explanation:
which description of salt is a chemical property?
1. white cube crystals
2.odorless
3.product of mixing acids and bases
4. solid does not conduct electricity
Pls answer quickly
When circumstances are right, most materials undergo a process called thermal expansion. Which statement best describes the cause and effect of thermal expansion? Group of answer choices Matter is heated, and its particles spread out more. Matter is heated, and its particles move closer together. Matter is cooled, and its particles move closer together. Matter is cooled, and its particles spread out more.
Answer: Matter is heated, and its particles spread out more
Explanation:
Thermal expansion occurs when there's an expansion of an object or material or when an object becomes bigger because of a rise in its temperature. This brings about the faster movement of the heated molecules and the atoms spreading out.
Therefore, the cause and effect of thermal expansion will be that when matter is heated, and its particles spread out more.
