Answer:
faster than 100 kph
Explanation:
Time taken to complete the first lap is
[tex]\dfrac{15\ \text{km}}{15\ \text{kph}}=1\ \text{hour}[/tex]
If the person's average speed is to be 30 kph then the complete race would be over in [tex]\dfrac{30}{30}=1\ \text{hour}[/tex]
But 1 hour has passed in the first lap already so, the next 15 km must be covered in 0 time.
So, the speed of the bike must be more than 100 kph.
Please help ASAP please ASAP
What distance is required for a train
to stop if its intial Velocity is 23 m/s
and its deceleration is 0.25m/s (Assume the train decelerates at a constant rate.)
Explanation:
what is time in this question
A bucket is filled partly with water such that its combined mass is 2.5 kg. It is tied to a rope and whirled in a circle with a radius of 1.4 m. The speed at the top of the circle is 4.0 m/s and the speed at the bottom of the circle is 6.0 m/s. Determine the magnitude of the net force acting on the bucket at the bottom of the circle.
Answer:
1. Simply τ = m x g x r = 54kg x 9.8m/s² x 0.050m = 26 N·m
2. The bucket creates a torque
τ = 75kg x 9.8m/s² x 0.075m = 55 N·m,
so we must create the same torque with the handle.
55 N·m = F x 0.25m
F = 220 N
Explanation:
Hope this is helpful
Henry designs an experiment to find out why plants without flowers tend to be wind-pollinated and not animal-pollinated. He takes samples from a variety of plants and studies them in the field. He finds that the evidence supports his hypothesis. Which of these was the hypothesis Henry was testing? Choose the correct answer. Nonflowering plants make less pollen than flowering plants. Nonflowering plants lack the structures to attract animal pollinators. Nonflowering plants grow close to the ground and capture fewer pollinators. Nonflowering plants grow close to the ground because they have no pollen grains.
Answer:
option 2
Explanation:
you are very welcom
A car battery produces 12 from electric that each produce 2.0 V. What is the minimum number of electric cells in car battery?
Answer:
6
Explanation:
From the given question, since a total of 12 V was obtained from the battery which is made up of a number of cells with each producing 2.0 V.
Assuming that the cells have a very low internal resistance, then;
minimum number of electric cells in the car battery = [tex]\frac{total voltage from the cells}{individual voltage of the cells}[/tex]
= [tex]\frac{12}{2}[/tex]
= 6
Thus, the minimum number of electric cells in the car battery is 6.
This implies that the addition of 6 cells which has 2.0 V supply in the battery produces a total of 12 V. Provided that the cells have a very low internal resistance.
plz hurry
Which of the following is a result of sterilizing wounds with chemicals?
increased rate of infection
reduced need for hand-washing
reduced rate of infection
increased death rate
Answer:
Sterilization is a common medical practice It decreased bacterial bloom and coverage Hence it reduced rate of infectionA ‘can-chiller’ is used to make a can of drink colder. The initial temperature of the liquid in the can was 25.0 °C. The can-chiller decreased the temperature of the liquid to 20.0 °C. The amount of energy transferred from the liquid was 6930 J. The mass of liquid in the can was 0.330 kg.
Calculate the specific heat capacity of the liquid. Give the unit.
Please help :)
Answer:
4200 J/°C/kg
Explanation:
The formula for heat transfer is given by :
Q= m*c*ΔT where;
Q= heat transferred = 6930 J
m=mass of the liquid = 0.330 kg
c= specific heat capacity=?
ΔT = 25-20 = 5.0°C
Applying the values in the formula as;
Q= m*c*ΔT
6930 = 0.330 * c * 5
6930 = 1.65 c
6930/1.65 = c
4200 = c
c= 4200 J/°C/kg
What are five facts about magnets? Please help me
If there is a difference in air pressure between two locations, what happens?
Answer:
High in the atmosphere, air pressure decreases. ... A low pressure system has lower pressure at its center than the areas around it. Winds blow towards the low pressure, and the air rises in the atmosphere where they meet. As the air rises, the water vapor within it condenses, forming clouds and often precipitation.
Explanation:
When fireworks explode, sound and light are produced. These are examples of(1 point)
macroscopic inputs.
macroscopic outputs.
microscopic inputs.
microscopic outputs.
Answer: macroscopic outputs
Explanation:
When fireworks explode, sound and light are produced. These are examples of macroscopic outputs. Because, explosion from fireworks is an exothermic process which releases massive heat energy to the surroundings.
What is exothermic reaction?Exothermic reaction are those which evolve heat energy to the surroundings. The change in enthalpy of the reaction is negative here. Whereas, in an endothermic reaction energy is absorbed by the reactants.
Exothermic reactions sometimes results in massive explosion. The heat energy released to the surroundings from the fire works is macroscopic level.
The small scale process or quantity that cannot be measured using normal scales are called microscopic units. Therefore, the sound, light, and heat from the explosion all are macroscopic outputs.
Find more on exothermic reactions:
https://brainly.com/question/29206227
#SPJ6
An empty airplane with a mass of 200,000 kg must have a speed of 82 m/s to achieve takeoff. Once it is fully loaded, the airplane has a mass of 350,000 kg. It has 3200 m of runway. a) How much force is needed to get the full airplane safely in the air?
b) How much runway would the empty airplane use if its engines generated the same force?
Answer:
a) A force of 367718.75 newtons is needed to get the full airplane safely in the air.
b) The empty airplane would need a runway of 1828.571 meters.
Explanation:
a) This problem can be solved by using the Work-Energy Theorem, which states that work needed by the airplane to get minimum speed is equal to its change in translational kinetic energy, both measured in joules. The resulting formula is presented below:
[tex]F\cdot \Delta s = \frac{1}{2}\cdot m \cdot (v_{f}^{2}-v_{o}^{2})[/tex] (1)
Where:
[tex]F[/tex] - Minimum net force, measured in newtons.
[tex]\Delta s[/tex] - Runway length, measured in meters.
[tex]m[/tex] - Mass of the airplane, measured in kilograms.
[tex]v_{o}[/tex], [tex]v_{f}[/tex] - Initial and final speeds of the airplane, measured in meters per second.
If we know that [tex]m = 350000\,kg[/tex], [tex]v_{o} = 0\,\frac{m}{s}[/tex], [tex]v_{f} = 82\,\frac{m}{s}[/tex] and [tex]\Delta s = 3200\,m[/tex], then the minimum net force needed by the airplane to get itself safely in the air:
[tex]F = \frac{m\cdot (v_{f}^{2}-v_{o}^{2})}{2\cdot \Delta s}[/tex]
[tex]F = \frac{(350000\,kg)\cdot \left[\left(82\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right]}{2\cdot (3200\,m)}[/tex]
[tex]F = 367718.75\,N[/tex]
A force of 367718.75 newtons is needed to get the full airplane safely in the air.
b) If we know that [tex]m = 200000\,kg[/tex], [tex]v_{o} = 0\,\frac{m}{s}[/tex], [tex]v_{f} = 82\,\frac{m}{s}[/tex] and [tex]F = 367718.75\,N[/tex], then the length of the runway is:
[tex]\Delta s = \frac{m\cdot (v_{f}^{2}-v_{o}^{2})}{2\cdot F}[/tex]
[tex]\Delta s = \frac{(200000\,kg)\cdot \left[\left(82\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right]}{2\cdot (367718.75\,N)}[/tex]
[tex]\Delta s = 1828.571\,m[/tex]
The empty airplane would need a runway of 1828.571 meters.
Nina's measurements, shown in the table here, BEST represent a wave with
A)
decreasing frequency.
B)
increasing frequency.
C)
increasing amplitude.
D)
decreasing amplitude.
Nina's data in this table most accurately depict a wave with decreasing frequency. Option A is right.
What is frequency?A recurring event's frequency is measured by how many times it occurs in a unit of time.
To emphasize distinctions with spatial and angular frequencies, respectively, it is also sometimes referred to as ordinary frequency or temporal frequency.
If the duration, or time interval, required to complete one cycle or vibration is half a second, the frequency is 2 per second; if it is one hundredth of an hour, the frequency is 100 per hour.
The frequency and period, or time interval, are often reciprocally equal, therefore frequency = 1/period = 1 in most circumstances.
The Moon rotates about Earth about a little bit more than 12 times a year. In a violin A string vibrates at a frequency of 440 cycles per second.
Thus, the correct option is A.
For more details regarding frequency, visit:
https://brainly.com/question/5102661
#SPJ5
Einstein calculated that ripples of gravity travel at exactly the speed of _____
Answer:
299,792,458 m/s = speed of light
Explanation:
Which of these pairs of atoms are isotpoes? (Physical Science) Pair A Pair B Pair C # protons 6 8 5 2 12 12 # neutrons 8 8 5 3 13 14
Answer:
I guess that the atoms are:
Protons: 6 8 5 2 12 12
Neutrons: 8 8 5 3 13 14
Now, two atoms are isotopes if they share the same number of protons (so both atoms are the same element) but they have a different number of neutrons.
From the given options, the only two that have the same number of protons but a different number of neutrons are:
Protons 12, neutrons 13
and
Protons 12, neutrons 14.
These two are isiotopes.
A person runs 15.0 km north then turns around and runs 10.0 Km south. what is his dstance
Answer:
25km
Explanation:
The person runs 15km Northward
Turns around and runs 10km southward
The distance is the length of path covered by the person running.
This is given as:
Distance = Distance North + Distance South
Distance = 15km + 10km = 25km
Answer:
25km
Explanation:
cant explain but ik
whats the result of rounding 52.8015 into five significant figures
Answer:
52.802
Explanation:
"Significant figures" in Mathematics refer to the digits that give accuracy to the value of a measurement. There are specific rules when it comes to determining the significant figures. For example, all non-zero digits are considered significant and zeroes located in-between non-zero numbers are significant. In the number given above, the digit "0" is located between "8" and "1," therefore, it is significant. All the digits above are significant.
The problem is only asking for "five" significant figures. We can do this by counting from the left to the right. By this means, we know that the number will be rounded off to the nearest thousandths, which is "1." The number after 1 is 5, which means that 1 digit will be added to number 1, thus, making the digit into "2." The last digit (5) will then be removed.
Explanation:
five significant of 52.8015=52.801 ..
Electromagnetic waves are classified as longitudinal waves.
Please select the best answer from the choices provided
T
F
Answer:
False
Explanation:
Electromagnetic waves are transverse waves. That means that the electric and magnetic fields oscillate in a plane that is perpendicular to the direction of wave propagation.
Answer:
false electromagnetic waves are not classified as longitudinal waves
The air temperature is 70 degrees, and the relative humidity is 90%. Which conclusion can be made?(1 point)
The air holds little water vapor and is relatively dry.
The amount of water vapor in the air is 90% of what the air can hold.
The dew point temperature is 90% of the air temperature.
The temperature must rise in order for air to become saturated with water vapor.
Answer:
The amount of water vapor in the air is 90% of what the air can hold.
Explanation:
The answer is A
Answer: The answer is B: The amount of water vapor in the air is 90% of what the air can hold
IS IT B!! if not pls helpp!
Answer:
I believe you are correct but we just started this unit
Explanation:
An astronaut sitting on the launch pad on Earth's surface is 6,400 kilometers from Earth's center and weighs 400 newtons. Calculate her weight when she reaches an altitude of 6,400 kilometers above the surface of Earth.
Answer:
weight at height = 100 N .
Explanation:
The problem relates to variation of weight due to change in height .
Let g₀ and g₁ be acceleration due to gravity , m is mass of the object .
At the surface :
Applying Newton's law of gravitation
mg₀ = G Mm / R²
At height h from centre
mg₁ = G Mm /h²
Given mg₀ = 400 N
400 = G Mm / R²
400 = G Mm / (6400 x 10³ )²
G Mm = 400 x (6400 x 10³ )²
At height h from centre
mg₁ = 400 x (6400 x 10³ )²/ ( 2 x 6400 x 10³)²
= 400 / 4
= 100 N .
weight at height = 100 N
Explain how the design of a racing car makes it less likely to turn over.
The principles which allow aircraft to fly are also applicable in car racing. The only difference being the wing or airfoil shape is mounted upside down producing downforce instead of lift. The Bernoulli Effect means that: if a fluid (gas or liquid) flows around an object at different speeds, the slower moving fluid will exert more pressure than the faster moving fluid on the object. The object will then be forced toward the faster moving fluid. The wing of an airplane is shaped so that the air moving over the top of the wing moves faster than the air beneath it. Since the air pressure under the wing is greater than that above the wing, lift is produced. The shape of the Indy car exhibits the same principle. The shape of the chasis is similar to an upside down airfoil. The air moving under the car moves faster than that above it, creating downforce or negative lift on the car. Airfoils or wings are also used in the front and rear of the car in an effort to generate more downforce. Downforce is necessary in maintaining high speeds through the corners and forces the car to the track. Light planes can take off at slower speeds than a ground effects race car can generate on the track. An Indy ground effect race car can reach speeds in excess of 230 mph using downforce. In addition the shape of the underbody (an inverted wing) creates an area of low pressure between the bottom of the car and the racing surface. This sucks the car to road which results in higher cornering speeds.
The total aerodynamic package of the race car is emphasized now more than ever before. Teams that plan on staying competitive use track testing and wind tunnels to develop the most efficient aerodynamic design. The focus of their efforts is on the aerodynamic forces of negative lift or downforce and drag. The relationship between drag and downforce is especially important. Aerodynamic improvements in wings are directed at generating downforce on the race car with a minimum of drag. Downforce is necessary for maintaining speed through the corners. Unwanted drag which accompanies downforce will slow the car. The efficient design of a chassis is based on a downforce/drag compromise. In addition the specific race circuit will place a different demand on the aerodynamic setup of the car.
A road course with low speed corners, requires a car setup with a high downforce package. A high downforce package is necessary to maintain speeds in the corners and to reduce wear on the brakes. This setup includes large front and rear wings. The front wings have additional flaps which are adjustable. The rear wing is made up of three sections that maximize downforce.
The speedway setup looks much different. The front and rear wings are almost flat and are used as stabilizers. The major downforce is found in the shape of the body and underbody. Drag reduction is more critical on the speedway than on other circuits. Since the drag force is proportional to the square of the speed, minimizing drag is a primary concern in the speedway setup. Lap speeds can average over 228 mph and top speeds can exceed 240 mph on a speedway circuit. Effective use of downforce is especially pronounced in highspeed corners. A race car traveling at 200 mph. can generate downforce that is approximately twice its own weight.
Generating the necessary downforce is concentrated in three specific areas of the car. The ongoing challenge for team engineers is to fine tune the airflow around these areas.
A 10.0kg box sits at rest on ramp that has an incline of 20.0° from the horizontal. What is the force of gravity acting on the box?
A. -98.0N
B. 98.0N
C. -92.1N
D. -33.5N
Answer:
98.0N
Explanation:
I was having trouble with this problem, and problems like it: A 3.2 kg pelican, with a 1.73 kg fish in its mouth, is flying 1.52 m/s at a height of 40 m when the fish wiggles free and fall back toward the ocean. How fast is the fish moving when it hits the water?
Answer:
28.1 m/s
Explanation:
[tex]u_x[/tex] = Initial velocity of the fish = 1.52 m/s
y = Height of the bird = 40 m
[tex]a_y[/tex] = Acceleration in y axis = [tex]9.81\ \text{m/s}^2[/tex]
[tex]u_y[/tex] = Initial velocity in y axis = 0
[tex]y=u_yt+\dfrac{1}{2}a_yt^2\\\Rightarrow 40=0+\dfrac{1}{2}\times 9.81t^2\\\Rightarrow t=\sqrt{\dfrac{40\times 2}{9.81}}\\\Rightarrow t=2.86\ \text{s}[/tex]
[tex]v_y=u_y+a_yt\\\Rightarrow v_y=0+9.81\times 2.86\\\Rightarrow v_y=28.057\ \text{m/s}[/tex]
The final velocity in x direction will remain the same as the initial velocity as there is no acceleration in the x direction [tex]u_x=v_x=1.52\ \text{m/s}[/tex]
Resultant velocity is given by
[tex]v=\sqrt{v_x^2+v_y^2}\\\Rightarrow v=\sqrt{1.52^2+28.057^2}\\\Rightarrow v=28.1\ \text{m/s}[/tex]
The fish is moving at a velocity of 28.1 m/s when it hits the water.
Imagine you are dating a mineral sample that contains one-eighth of its original parent isotope. What is the
absolute age of the sample if the half-life of the parent isotope is 15 years?
A. 1.875 years
B. 23 years
C. 45 years
D. 120 years
The age of the sample can be determined using the first order equation of the nuclear decay. The age of the parent isotope here is 45 years.
What is half life ?Unstable radioactive nuclei undergo nuclear decay to produce more stable nuclei with more life time. The time required to decay half of the initial amount of a material is called its half life.
The half life of a sample is related with the decay constant k as follows:
k = 0.693/t1/2
Given that, t1/2 = 15 years
k = 0.693/15 = 0.0462 yr⁻¹
The first order equation of the decay process is written as:
k = 1/t ln w0/wt
where w0 is the initial amount and wt be the amount after time t.
then t = 1/k ln w0/wt
Given that, the sample was decayed to one eighth of the initial amount .
t = 1/k ln 8
= 1/0.0462 ln 8
= 45 years.
Therefore, option C is correct.
Find more on nuclear decay:
https://brainly.com/question/12224278
#SPJ6
How much of the matter in the universe is comprised
of atoms?
a. 1%
b. 100%
c. 30%
d. 99%
Answer: I believe the correct answer is A.
A ball falls from a tower
a) The two forces acting on the tennis ball are equal and opposite. What is the resultant force
?acting on the ball
Answer:
Zero
Explanation:
The resultant force acting on the ball would be zero.
Since only two forces were acting on the tennis ball and these forces negate and cancel each other in magnitude, the resultant effect on the tennis ball would be zero.
Assuming that one of the forces is 5N and acting from the positive side and the other force is also 5N but acting from the negative side.
Resultant = -5 + 5 = 0 N
Fig. 2.1 shows a train
Fig. 2.1
The total mass of the train and its passengers is 750000kg. The train is travelling at a speed of 84m/s.
The driver applies the brakes and the train takes 80s to slow down to a speed of 42m/s.
(a) Calculate the impulse applied to the train as it slows down,
impulse =
[3]
(b) Calculate the average resultant force applied to the train as it slows down,
force =
(2)
Answer:
[tex]\mathrm{(a)\:}32,000,000\:\mathrm{Ns},\\\mathrm{(b)\:}390,000\:\mathrm{N}[/tex]
Explanation:
The impulse-momentum theorem states the impulse on an object is equal to the change in momentum of that object. Momentum is given by [tex]p=mv[/tex]. Since mass is constant, the train's change in momentum is:
[tex]\Delta p=m\Delta v=750,000\cdot42=31,500,000=\fbox{$32,000,000\:\mathrm{Ns}$}[/tex](two significant figures).
Impulse is also given as [tex]\Delta p = F\Delta t[/tex], where [tex]F[/tex] is the average force applied and [tex]\Delta t[/tex] is change in time. Since [tex]t[/tex] is given as [tex]80\mathrm{s}[/tex], we have the following equation:
[tex]F\Delta t=\Delta p\\\\F=\frac{\Delta p}{\Delta t},\\\\F=\frac{31,500,000}{80},\\\\F=393,750=\fbox{$390,000\:\mathrm{N}$}[/tex](two significant figures).
what volume of alcohol will have the same mass as 4.2m^3 of petrol? (density of alcohol 0.4kg/m^3 and petrol is 0.3kg/m^3)
Answer:
3.15m³
Explanation:
To solve this problem, let us first find the mass of the petrol from the given dimension.
Mass = density x volume
Volume of petrol = 4.2m³
Density of petrol = 0.3kgm⁻³
Mass of petrol = 4.2 x 0.3 = 1.26kg
So;
We can now find the volume of the alcohol
Volume of alcohol = [tex]\frac{mass}{density}[/tex]
Mass of alcohol = 1.26kg
Density of alcohol = 0.4kgm⁻³
Volume of alcohol = [tex]\frac{1.26}{0.4}[/tex] = 3.15m³
I NEED ANSWER ASAP!!!
At which point(s) will acceleration occur shown in the image???
Answer:
Gravity is an ever present force, and therefore acceleration is guaranteed to happen at every single one of those points (and in fact, everywhere in the universe).
On top of that, friction will be present in all four spots (friction with the rails, with the air, with the axles, etc.), and friction is a perfectly acceptable force that will cause acceleration, slowing the roller coaster down.
So the correct answer is every single point, regardless of what answer the teacher expects.
The object will be moving faster if the acceleration and velocity are pointing in the same direction. The object will also slow down if the acceleration is pointing in the opposite direction as the velocity.
What role of acceleration in the motion of object?When an object's speed, direction of motion, or both change, it accelerates. Even while it may appear to be virtually immediate in some circumstances, such as when a golf ball is struck by a club or during car collisions, changes in an object's speed are always continuous.
Since gravity is a constant force, acceleration will unavoidably occur at each of those locations and throughout the whole universe.
Therefore, In addition, there will be friction at all four locations—friction with the axles, the air, the rails, etc.—and friction is a completely normal force that will accelerate the roller coaster, slowing it down.
Learn more about acceleration here:
https://brainly.com/question/14814063
#SPJ2
A horizontal pole is attached to the side of a building. There is a pivot P at the wall and a chain is connected from the end of the pole to a point higher up the wall. There is a tension force F in the chain. What is the moment of the force F about the pivot P?
Answer:
Fscos63
Explanation:
Given that a horizontal pole is attached to the side of a building. There is a pivot P at the wall and a chain is connected from the end of the pole to a point higher up the wall. There is a tension force F in the chain. What is the moment of the force F about the pivot P?
Taking the moment from the pivot point P, that means the moment at point p = 0
Then, if we consider the weight mg of the pole, according to the principle of equilibrium : sum of the upward forces equal to the sum of the downward forces.
Therefore, mg = Fsinø ....... (1)
Also, taking moment at point P
Let the length of the pole = s
The length of the weight of the pole = 1/2 S
Fscosø = mgs/2
The distance s will cancel out
2Fcosø = mg ...... (3)
Substitute mg in equation 1 into equation 3
2fcosø = fsinø
F will cancel out
Tanø = 2
Ø = tan^-1(2)
Ø = 63.4 degree
The moment of force F about pivot point P will be
Moment = force × distance
Moment = Fcos63 × S
Moment = Fscos63
