Answer:
Part 1; The total energy = Constant = 200 J
Part 2; Midway, the potential energy = The kinetic energy = 100 J
Explanation:
Part 1
According to the first law of thermodynamics, energy is neither created nor destroyed but changed from one form to another
The total (mechanical) energy = Potential energy + Kinetic energy = Constant
The kinetic energy given to the ball changed vertically up = 200 J
Potential energy = Mass, m × Gravity, g × Height, h
Given that the mass m of the ball and the acceleration due to gravity, g, remain the same, we have;
Potential energy ∝ The height of the ball
The potential energy at ground level = 0 J (Height , h = 0)
∴ The total (mechanical) energy = 0 J + 200 J = 200 J
At the maximum height, the ball momentarily stops, and the kinetic energy = 0 J
Therefore;
The potential energy of the ball at the maximum height, [tex]h_{max}[/tex], [tex]P.E._{max}[/tex] = 200 J
∴ [tex]P.E._{max}[/tex] = m·g·[tex]h_{max}[/tex] = 200 J
Part 2
At midway we have, the height, h = ([tex]h_{max}[/tex])/2
Therefore, [tex]P.E._{Midway}[/tex] = (m·g·([tex]h_{max}[/tex]))/2 = ([tex]P.E._{max}[/tex])/2 = (200 J)/2 = 100 J
The potential energy midway = 100 J
The remaining 200 J - 100 J = 100 J is the kinetic energy remaining in the ball
The kinetic energy midway = 100 J
Therefore, the total energy midway = 100 J + 100 J = 200 J
Una onda se propaga en un medio P, de tal forma que recorre una distancia 8D en un tiempo 4T. La misma onda cuando se propaga por un medio Q recorre una distancia 4D en el mismo tiempo anterior, es decir, en 4T. Respecto a esta onda es correcto afirmar que *
Sabemos todo material tiene asociado un coeficiente de difracción n.
De tal forma que la velocidad de una onda electromagnetica que viaja a travez de dicho material, será:
v = c/n
donde c es la velocidad de la luz.
Con la información dada, podremos concluir que el coeficiente de difracción del medio Q es dos veces el del medio P.
Ahora veamos como llegamos a esto:
Sabemos que en el medio P, la onda recorre una distancia 8*D en un tiempo 4*T
entonces la velocidad de la onda en el medio P es:
[tex]V_p = \frac{8*D}{4*T} = 2*\frac{D}{T}[/tex]
Mientras que en el medio Q, recorre una distancia 4*D en un tiempo 4*T, por lo que la velocidad en el medio Q será:
[tex]V_Q = \frac{4*D}{4*T} = \frac{D}{T}[/tex]
Podemos ver que:
[tex]V_P = 2*V_Q[/tex]
Reescribiendo las velocidades como el cociente entre la velocidad de la luz y el correspondiente coeficiente de difracción obtenemos:
[tex]\frac{c}{n_P} = 2*\frac{c}{n_Q} \\\\n_Q = 2*n_P[/tex]
Es decir, podemos concluir que el coeficiente de difracción del medio Q es dos veces el del medio P.
Si quieres aprender más sobre el tema, puedes leer:
https://brainly.com/question/11779790
Which two statements are true about a system?
a)A system is a group of objects analyzed as one unit.
b)Energy that moves across system boundaries is conserved.
c)There’s only one way to define the boundaries of a system.
d)All systems are made by humans.
If the wave is detected 12.5 minutes after the earthquake, estimate the distance from the detector to the site of the quake
Answer:
Remember the relation:
Speed*Time = Distance.
We can estimate that the speed at which an earthquake "moves", in the surface, is:
S = 6km/s (this is a low estimation actually)
Then if the wave is detected 12.5 minutes after the earthquake, we know that it traveled for 12.5 minutes before reaching the detector.
So we know the speed of the wave and the time it took to reach the detector, then we can use the equation:
Speed*Time = Distance.
to find the distance.
First, we should write the time in seconds
we know that:
1 min = 60 s
then:
12.5 min = 12.5*(60 s) = 750 s
Then, the wave traveled with a speed of 6 km/s for 750 seconds until it reached the detector, then the distance that it traveled is:
(6km/s)*750s = 4500 km
The distance between the detector and the site of the quake is around 4500 km.
Which is an example of current electricity?
Answer:
D
Explanation:
i just did it trust me
the weight of a body is 420 newton.calculate it's mass
Answer:
42g
Explanation:
the mass of a body is given by
m=weight/gravity
=420/10
=42
I hope this helps
When should a line graph be used?
A. When the independent variable is continuous and shows a causal link to the dependent variable.
B. When the independent variable is composed of categories and does not show a relationship.
C. When there is no independent variable.
D. When the independent variable is continuous and does not show a relationship to the dependent variable.
Answer:
A. When the independent variable is continuous and shows a causal link to the dependent variable.
Explanation:
A graph can be defined as the graphical representation of data (informations) on horizontal and vertical lines i.e x-axis and y-axis respectively.
In an experiment , the variable being manipulated by an experimenter is known as an independent variable while the dependent variable is the event expected to change when the independent variable is manipulated
Generally, a line graph should be used when the independent variable is continuous and shows a causal link to the dependent variable.
This ultimately implies that, a line graph should be used when the data changes continuously over time and as such there exist a linear relationship between the data (variables).
Bagaimanakah pelembapan bagi suatu sistem ayunan dapat diatasi dengan resonans?
Answer:
Those reaction in which one element replaces another element form its place is called Single displacement reaction
Momentum is a quantity that we say is typically _______________ in collisions.
A. Conserved
B. Lost
C. Disappeared
D. Gained
Momentum is a quantity that we can say is typically conserved in collisions.
Momentum is the quantity that that we see typically conserve in the collision,therefore the correct answer is the option A
It is the type of collision in which the total momentum as well as the kinetic energy on the system is conserved .The momentum before the collision is equal to the momentum after the collision in other words one can say in the elastic collision momentum of the quantity is conserved.
In the inelastic collision the momentum is conserved but the kinetic energy of the quantity is not conserved.
Momentum of a quantity is conserved irrespective of the type of collision whether it will be elastic collision or inelastic collision the momentum of the quantity will always be conserved.
Hence,we can say that momentum is the quantity that is conserved in collision,The correct answer for the given problem is option A.
Learn more about the collision and from here
https://brainly.com/question/2356330
#SPJ2
Highlight two factors which shows that heat from the sun does not reach the earth surface by convection
Answer:
Explanation:
The heat from the Sun gets to the surface of the Earth by radiation and not by convection because:
i. Radiation does not require material medium for its propagation: Since the space between the Sun and Earth is a vacuum ( i.e it is an empty space), then the only method for the heat from to Sun to get to the Earth is by radiation. This method does not require a material medium, while convection is a method that requires material medium for its propagation.
ii. Radiation occurs without heating the intervening medium: During the propagation of the heat from the Sun to the Earth, the space between the two heavenly bodies is not heated up. Some fraction of the heat after hitting the surface of the Earth get reflected back into the Earth's atmosphere. While in convection, the medium would have been heated up in the process.
why a magnetic compass is used to determine the direction.
Answer:
the magnetic compass is used to determine direction because it is one of the most accurate form of magnet as we already know that a freely suspended magnet always faces towards north direction and south direction
HELP ME
Which two changes to the can opener would increase its mechanical efficiency?
A shorten the paddle so that they are closer in size to the axle that they turn
B grease the rotating wheel of the opener so that there is less breaks in between moving parts
C replaced it with a straight handle the act as levers with shorter pieces of metal
D sand the cutting surface of the metal piece so that it is perfectly smooth and sharp
Answer:
I THINK IT'S D....
HOPE SO
1. Car A is heading East at 25 m/s and car B is also heading East at 25 m/s. What is the relative velocity between car A
and car B? How would the passenger in Car A describe Car B's motion
The relative velocity between Car A and Car B is 0 m/s
Since Car A is heading East at 25 m/s, its velocity is u = + 25 m/s. (since it is moving in the positive x- direction)
Also, car B is also heading East at 25 m/s, its velocity is v = + 25 m/s. (since it is moving in the positive x- direction)
So, the relative velocity between car A and Car B is V = velocity of car A - velocity of car B.
So, V = u - v
V = + 25 m/s - (+ 25 m/s)
V = + 25 m/s - 25 m/s
V = 0 m/s
So, the relative velocity between Car A and Car B is 0 m/s
The passenger in Car A would describe Car B's motion as stationary.
Since Car A is heading East at 25 m/s and car B is also heading East at 25 m/s, both cars are moving at a velocity of + 25 m/s.
Since their relative velocity is 0 m/s, it would appear to a passenger in Car A that car B is stationary according to motion from car A's reference frame.
So, the passenger in Car A would describe Car B's motion as stationary.
During what intervals was Jenny positively accelerating?
Answer:
3:00 - 3:02 and 3:07 - 3:08
Explanation:
Those are the only intervals in which Jenny's speed increased.
Answer and Explanation:
To know where Jenny was positively accelerating, we have to find where the slopes on the graph are increasing (in the positive direction).
By looking at the graph, we can see that at the intervals:
3:00 to 3:02 and 3:07 to 3:08
Jenny was positively accelerating, as there is an increase in speed during these time intervals.
#teamtrees #PAW (Plant And Water)
I hope this helps!
in what condition does a body float
Answer:
if buoyant force is equal is equal to the weight of body then our body float. if density of our body is less than density of liqiud then our body float in water.
How does electric force affect an atom?
O A. It keeps the neutrons in the atom.
B. It pushes the neutrons away from the protons.
O c. It pushes the electron away from the protons.
D. It keeps the electrons in the atom.
what will happen to the gravitational force between two bodies if the distance between them is halved keeping their masses constant ?..
(This is for other people with this Question i hope you find this when you need help) Need answer for this Help!!!
Question 7 of 20 You plan to use a slingshot to launch a ball that has a mass of 0.025 kg. You want the ball to accelerate straight toward your target at 19 m/s2. How much force do you need to apply to the ball? O A. 19.03 N OB. 0.48 N O C. 4.51 N D. 760.00 N
Answer:
0.48N
Explanation:
according to the second law of motion
force=mass×acceleration
the mass in this question is 0.025,the acceleration 19
therefore f=0.025×19
=0.48N
I hope this helps
Como surgiu a capoeira?
The energy required to change the state of a substance was determined to be E(H).
If the mass of the substance was DOUBLED, the value of E(H) will
(A) be halved
(B) be doubled
(C) be quadrupled
(D) remain constant
Answer:
ccccccccc or bbbbbbb or aaaaaaaa or ddddddd
Which direction do electrons travel
A.from negative to positive
B.in either direction depending on the circuit
C.from positive to negative
D.they don’t move they simply exchange charge
Answer:
option a negative to positive
Explanation:
The flow of electrons is termed electron current. Electrons flow from the negative terminal to the positive. Conventional current or simply current, behaves as if positive charge carriers cause current flow. Conventional current flows from the positive terminal to the negative
brainliest plsss
what is the chance of my hand going through a table when hitting it
Answer:
There is a 1 in roughly 5.2 to the 61st power chance that if you were to slap a table, all of the molecules in your hand and the table would miss each other and your hand would go through it.
Explanation:
I'm not sure but I hope it helps
what's is acceleration. ?????
Answer:
Acceleration, rate at which velocity changes with time, in terms of both speed and direction. A point or an object moving in a straight line is accelerated if it speeds up or slows down. ... Acceleration is defined as the change in the velocity vector in a time interval, divided by the time interval.
Answer:
The rate of change in velocity with time A=finall velocity _intial velocity upon time
1. How much heat energy ( Q ) is required to heat 2.0 kg of copper from 30.0 oC to 80.0 oC?
Answer:
38500
Explanation:
I looked it up so it may be wrong
TUOI 7. A stone dropped from a window reaches the ground in 1.5 seconds. Calculate the height of the window above the ground
The height of the window above the ground is 11.025m
The first step is to write out the parameters given in the question
U(initial velocity)= 0
Time= 1.5 seconds
Acceleration due to gravity= 9.8
Therefore the height of the window can be calculated as follows
S= ut + 1/2gt²
= 0(1.5) + 1/2(9.8)(1.5²)
= 0 + 1/2(9.8)(2.25)
= 1/2(22.05)
= 0.5×22.05
= 11.025
Hence the height of the window above the ground is 11.025m
Click on the link below to learn more
https://brainly.com/question/11853995?referrer=searchResults
a boat ended up with a velocity of 30.m/s [N30.E] after it experienced an acceleration of 3.0m/s^2 [S] for a period of 4.0s what displacement did the boat cover
Answer:
96 m
Explanation:
The average velocity over those 4 seconds is the velocity after 2 seconds:
30 m/s -(2 s)(3.0 m/s^2) = 24 m/s
The displacement is the product of this average velocity and the duration of the acceleration:
d = (24 m/s)(4 s) = 96 m
The boat covered 96 m while being accelerated.
HELP!!
A particular electric car is supplied with 300 kJ of chemical energy by the battery. Of this, a total of 70.5 kJ of energy is wasted as heat.
Calculate the overall efficiency of the electric car.
[tex]\\ \sf\longmapsto 300-70.5=229.5kJ[/tex]
We know
[tex]\boxed{\sf Efficiency=\dfrac{Used\:Energy}{Supplied\:Energy}\times 100}[/tex]
[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{300}\times 100[/tex]
[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{3}[/tex]
[tex]\\ \sf\longmapsto Efficiency=76.5\%[/tex]
b. The role of the moon is greater than that of the sun in the occurrence of tides. ???
Our sun is 27 million times larger than our moon. Based on its mass, the sun's gravitational attraction to the Earth is more than 177 times greater than that of the moon to the Earth. If tidal forces were based solely on comparative masses, the sun should have a tide-generating force that is 27 million times greater than that of the moon. However, the sun is 390 times further from the Earth than is the moon. Thus, its tide-generating force is reduced by 3903, or about 59 million times less than the moon. Because of these conditions, the sun’s tide-generating force is about half that of the moon.
A bullet of mass of 50g is moving with the velocity of 200km/h .calculate the kinetic energy of the bullet .
Answer:
is 10³
Explanation:
cuz the formula of KE is 1/2mv²
covert 50g to kg first then plug in the formula
1/2 × 0.05 × 200 = 10³ J
When the apple fall towards tje earth tje earth move up to meet the apple.Os it true.If yes why is the earth motion not noticeable
Answer:
Explanation:
It was Newton's genius that saw that it was true. He also realized that if it was true, the motion the earth experience would be unmeasurably small, especially in his time. Their instruments were just not good enough: crude and too approximate would be better descriptions.
A person climbs out of swimming pool and stands in the open air.Explain why evaporation of water from the surface of the persons body causes the person to feel cold
Answer:
The person feels cool at first because the swimming pool water is usually cool and he/she has that water on his body. But when it evaporates, the cool air directly touches his body and that's why he/she feels cold.
Thank You! Please mark me Brainliest!
