A mail-order company business has six telephone lines. Let X denote the number of lines in use at a specified time. Suppose the pmf of X is as given in the accompanying table.
x 0 1 2 3 4 5 6
p(x) 0.10 0.15 0.20 0.25 0.20 0.05 0.05
Calculate the probability of each of the following events.
(a) {at most three lines are in use}
(b) {fewer than three lines are in use}
(c) {at least three lines are in use}
(d) {between two and five lines, inclusive, are in use}
(e) {between two and four lines, inclusive, are not in use}
(f) {at least four lines are not in use}

Answer:

[tex]14 {y}^{2} \sqrt{ {x}^{3} {z}^{9} }[/tex]

Step-by-step explanation:

[tex] \sqrt{196 {x}^{3} {y}^{4}{z}^{9} }= \sqrt{196} \times \sqrt{ {x}^{3} } \times \sqrt{ {y}^{4} } \times \sqrt{ {z}^{9} } \\ \sqrt{196} = 14 \\ \sqrt{ {x}^{3} } = {x}^{ \frac{3}{2} } \\ \sqrt{ {y}^{4} } = {y}^{2} \\ \sqrt{ {z}^{9}} = {z}^{ \frac{9}{2} }[/tex]

A fractional exponent is not necessarily simpler so just take out the 1st and 3rd parts of the term which simplify nicely:

[tex] \sqrt{196 {x}^{3} {y}^{4}{z}^{9} } = 14 {y}^{2} \sqrt{ {x}^{3} {z}^{9} } [/tex]

The equation that represents the value of the collection after 5 years is:

Value of collection after 5 years = 190 x (1 + 0.06)^5

Explanation:

To calculate the value of the collection after 5 years, we need to use the compound interest formula. This formula is represented as A = P x (1 + r)^n, where P is the principal amount (initial value of the collection), r is the rate of interest (in this case, 6%), and n is the number of years (in this case, 5).

Therefore, the equation for the value of the collection after 5 years is:

Value of collection after 5 years = 190 x (1 + 0.06)^5

This can also be written as:

Value of collection after 5 years = 190 x 1.31 (1.31 is the result of (1 + 0.06)^5)

Therefore, the value of the collection after 5 years is $246.90.

Answer: 254.26

Step-by-step explanation:

Answer:

Show your solution ( 3. ) C + 18 = 29

Step-by-step explanation:

To solve the equation C + 18 = 29, we want to isolate the variable C on one side of the equation.

We can start by subtracting 18 from both sides of the equation:

C + 18 - 18 = 29 - 18

Simplifying the left side of the equation:

C = 29 - 18

C = 11

Therefore, the solution to the equation C + 18 = 29 is C = 11.

The statement that best describes the mode of selection depicted in the figure is (b) Directional Selection, changing the average color of population over time.

The Directional selection is a type of natural selection that occurs when individuals with a certain trait or phenotype are more likely to survive and reproduce than individuals with other traits or phenotypes.

In the directional selection of evolution, the mean shifts that means average shifts to one extreme and supports one trait and leads to eventually removal of the other trait.

In this case, one end of the extreme-phenotypes which means that the dark-brown rats are being selected for. So, over the time, the average color of the rat population will change.

Therefore, the correct option is (b).

Learn more about Directional Selection here

https://brainly.com/question/12226774

#SPJ4

The given question is incomplete, the complete question is

The figure below shows the change of a population over time. which statement best describes the mode of selection depicted in the figure?

(a) Disruptive Official, favoring the average individual

(b) Directional Selection, changing the average color of population over time

(c) Directional selection, favoring the average individual

(d) Stabilizing Selection, changing the average color of population over time

If "f" is differentiable and f(1) < f(2), then there is a number "c", in the interval  (1, 2)  such that f'(c)>  0.

Applying the  Mean Value Theorem for derivatives, if a function f is continuous on the closed interval [a, b] and differentiable on the open interval (a, b), then there exists at least one number c in the interval (a, b) such that:

f'(c) = (f(b) - f(a)) / (b - a)

In the scenario above, we have that f is differentiable, and that f(1) < f(2).

choosing a = 1 and b = 2.

Then applying the Mean Value Theorem, there exists at least one number c in the interval (1, 2) such that:

f'(c) = (f(2) - f(1)) / (2 - 1)

f'(c) = f(2) - f(1)

We have that f(1) < f(2), we have:

f(2) - f(1) > 0

We can conclude by saying that there exists a number c in the interval (1, 2) such that:

f'(c) = f(2) - f(1) > 0

Learn more about Mean Value Theorem at: https://brainly.com/question/19052862

#SPJ1

a) An automorphism of a group G is a bijective map φ:G→G that preserves the group structure. That is, φ(ab) = φ(a)φ(b) and φ(a⁻¹) = φ(a)⁻¹ for all a, b ∈ G.

b) The set-theoretic composition φψ of any two automorphisms φ, ψ is an automorphism, as it preserves the group structure and is bijective.

c) The set Aut(G) of all automorphisms of G, with the operation of composition of maps, is a group. This is because it satisfies the four group axioms: closure, associativity, identity, and inverses. Therefore, Aut(G) is a group under composition of maps.

An automorphism of a group G is a bijective map φ:G→G that preserves the group structure, meaning that for any elements a,b∈G, we have φ(ab) = φ(a)φ(b) and φ(a⁻¹) = φ(a)⁻¹. In other words, an automorphism is an isomorphism from G to itself.

To show that the set-theoretic composition φψ is an automorphism, we need to show that it satisfies the two conditions for being an automorphism. First, we have

(φψ)(ab) = φ(ψ(ab)) = φ(ψ(a)ψ(b)) = φ(ψ(a))φ(ψ(b)) = (φψ)(a)(φψ)(b)

using the fact that ψ and φ are automorphisms. Similarly,

(φψ)(a⁻¹) = φ(ψ(a⁻¹)) = φ(ψ(a))⁻¹ = (φψ)(a)⁻¹

using the fact that ψ and φ are automorphisms. Therefore, φψ is an automorphism.

To show that Aut(G) is a group, we need to show that it satisfies the four group axioms

Closure: If φ,ψ∈Aut(G), then φψ is also in Aut(G), as shown above.

Associativity: Composition of maps is associative, so (φψ)χ = φ(ψχ) for any automorphisms φ,ψ,χ of G.

Identity: The identity map id:G→G is an automorphism, since it clearly preserves the group structure and is bijective. It serves as the identity element in Aut(G), since φid = idφ = φ for any φ∈Aut(G).

Inverses: For any automorphism φ∈Aut(G), its inverse φ⁻¹ is also an automorphism, since it is bijective and preserves the group structure. Therefore, Aut(G) is closed under inverses.

Since Aut(G) satisfies all four group axioms, it is a group under composition of maps.

Learn more about automorphism here

brainly.com/question/30967813

#SPJ4

Answer: Questionnaire refers to a research instrument, in which a series of question, is typed or printed along with the choice of answers, expected to be marked by the respondents, used for survey or statistical study. It consists of aformalisedd set of questions, in a definite order on a form, which are mailed to the respondents or manually delivered to them for answers. The respondents are supposed to read, comprehend and give their responses, in the space provided.

A ‘Pilot Study’ is advised to be conducted to test the questionnaire before using this method. A pilot survey is nothing but a preliminary study or say rehearsal to know the time, cost, efforts, reliability and so forth involved in it.

The interview is a data collection method wherein a direct, in-depth conversation between interviewer and respondent takes place. It is carried out with a purpose like a survey, research, and the like, where both the two parties participate in the one to one interaction. Under this method, oral-verbal stimuli are presented and replied by way of oral-verbal responses.

It is considered as one of the best methods for collecting data because it allows two way exchange of information, the interviewer gets to know about the respondent, and the respondent learns about the interviewer. There are two types of interview:

Personal Interview: A type of interview, wherein there is a face to face question-answer session between the interviewer and interviewee, is conducted.

Telephonic Interview: This method involves contacting the interviewee and asking questions to them on the telephone itself.

The cardinality of set A, n(A) = 29

The cardinality of a set is the total number of elements in the set

Given the Venn diagram here shows the cardinality of each set. To find the cardinality of set A, n(A), we proceed as follows.

Since the cardinality of a set is the total number of elements in the set, then cardinality of set A , n(A) = 9 + 8 + 3 + 9

= 29

So, n(A) = 29

Learn more about cardinality of a set here:

https://brainly.com/question/27846845

#SPJ1

a. 6! = 6 x 5 x 4 x 3 x 2 x 1 = 720. b. 20! = 20 x 19 x 18 x ... x 2 x 1. c. There are 16 zeros at the end of the decimal representation of (20!)2.

a. 6! = 6 x 5 x 4 x 3 x 2 x 1 = 720

b. 20! = 20 x 19 x 18 x ... x 2 x 1. To write this in factored form, we can identify the prime factors of each number and write the product using exponents. For example, 20 = 2² x 5, so we can write 20! as:

20! = (2² x 5) x 19 x (2 x 3²) x 17 x (2² x 7) x 13 x (2 x 2 x 3) x 11 x (2³) x (3) x (2) x 7 x (2) x 5 x (2) x 3 x 2 x 1

Simplifying, we get:

20! = 2¹⁸ x 3⁸ x 5⁴ x 7² x 11 x 13 x 17 x 19

c. The number of zeros at the end of (20!)² in decimal form is determined by the number of factors of 10, which is equivalent to the number of factors of 2 x 5. Since there are more factors of 2 than 5 in the prime factorization of (20!)², we only need to count the number of factors of 5. There are four factors of 5 in the prime factorization of 20!, which contribute four factors of 10 to the square. Therefore, (20!)²ends in 8 zeros when written in decimal form.

Learn more about integer here: brainly.com/question/15276410

#SPJ4

By using rational zeros theorem, we find that there are no real zeros of the polynomial function f(x) = x^3 - x^2 - 37x - 35, so we cannot factor f(x) over the real numbers.

To find the real zeros of the polynomial function f(x) = x^3 - x^2 - 37x - 35, we can use the rational zeros theorem, which states that any rational zeros of the function must have the form p/q, where p is a factor of the constant term (-35) and q is a factor of the leading coefficient (1).

The possible rational zeros of f are therefore ±1, ±5, ±7, ±35. We can then test each of these values using synthetic division or long division to see if they are zeros of the function. After testing all of the possible rational zeros, we find that none of them are actually zeros of the function.

Therefore, we can conclude that there are no real zeros of the function f(x) = x^3 - x^2 - 37x - 35.

However, we could factor it into linear and quadratic factors with complex coefficients using the complex zeros of f(x). But since the problem only asks for factoring over the real numbers, we can conclude that the factored form of f(x) is:

f(x) = x^3 - x^2 - 37x - 35 (cannot be factored over the real numbers)

To know more about rational zeros theorem:

https://brainly.com/question/29004642

#SPJ4

Sure, let's solve this step-by-step:

First, we need to solve for x in the equation x + 1/2 = 5.

We can do this by subtracting 1/2 from both sides, giving us x = 4 1/2.

Now, we can substitute x = 4 1/2 into the equation 2*x^2 - 3x + 6 - 3/x +2/x^2.

We can simplify the equation by multiplying both sides by x^2, giving us:

2*x^2 - 3x + 6 - 3/x +2 = 10*x^2 - 3x + 6.

Now, we can combine all of the terms with x:

10*x^2 - 6x + 6 = 0.

Finally, we can solve the equation using the quadratic formula:

x = 3/5 or x = 2.

Therefore, the answer to the equation is 10*(3/5)^2 - 6(3/5) + 6 = 4.8, or 10*2^2 - 6(2) + 6 = 16.

There are 92 elements in A but not in B.

In mathematics, a set is a well-defined collection of objects or elements. Sets are denoted by uppercase symbols, and the number of elements in a finite set is denoted as the cardinality of the set enclosed in curly braces {…}.

Empty or zero quantity:

Items not included. example:

A = {} is a null set.

Finite sets:

The number is limited. example:

A = {1,2,3,4}

Infinite set:

There are myriad elements. example:

A = {x:

x is the set of all integers}

Same sentence:

Two sets with the same members. example:

A = {1,2,5} and B = {2,5,1}:

Set A = Set B

Subset:

A set 'A' is said to be a subset of B if every element of A is also an element of B. example:

If A={1,2} and B={1,2,3,4} then A ⊆ B

Universal set:

A set that consists of all the elements of other sets that exist in the Venn diagram. example:

A={1,2}, B={2,3}, where the universal set is U = {1,2,3} 

n(A ∪ B) = n(A – B) + n(A ∩ B) + n(B – A)

Hence, There are 92 elements in A but not in B.

learn more about sets click here:

https://brainly.com/question/13458417

#SPJ1

a.(1) When both r and s are odd integers, the quadratic polynomial obtained by multiplying out (x - r)(x - s) will have a coefficient of 1 for x^2 term, and both the coefficient of x term and constant term will be odd integers.

(2) When both r and s are even integers, the polynomial obtained by multiplying out (x - r)(x - s) will also have a coefficient of 1 for x^2 term, but the coefficient of x term and constant term will be even integers.

(3) When one of r and s is even and the other is odd, the polynomial obtained by multiplying out (x - r)(x - s) will have a coefficient of 1 for x^2 term, the coefficient of x term will be an odd integer, while the constant term will be an even integer.

b. x^2 - 1253x + 255 cannot be written as a product of two polynomials with integer coefficients.

a. When both r and s are odd integers, the product (x − r)(x − s) will have a coefficient of 1 for x^2 term, and both the coefficient of x term and constant term will be odd integers. This is because the sum of two odd integers and the product of two odd integers is also an odd integer.

When both r and s are even integers, the product (x − r)(x − s) will also have a coefficient of 1 for x^2 term, but the coefficient of x term and constant term will be even integers. This is because the sum of two even integers and the product of two even integers is also an even integer.

When one of r and s is even and the other is odd, the product (x − r)(x − s) will have a coefficient of 1 for x^2 term, and the coefficient of x term will be an odd integer, while the constant term will be an even integer. This is because the sum of an odd and even integer is an odd integer, and the product of an odd and even integer is an even integer.

b. If x^2 - 1253x + 255 can be written as a product of two polynomials with integer coefficients, then we can write it as (x - r)(x - s) where r and s are integers. From part (a), we know that both r and s cannot be odd integers since the coefficient of x term would be odd, but 1253 is an odd integer. Similarly, both r and s cannot be even integers since the constant term would be even, but 255 is an odd integer. Therefore, one of r and s must be odd and the other must be even. However, the difference between an odd integer and an even integer is always odd, so the coefficient of x term in the product (x - r)(x - s) would be odd, which is not equal to the coefficient of x term in x^2 - 1253x + 255. Hence, x^2 - 1253x + 255 cannot be written as a product of two polynomials with integer coefficients.

Learn more about quadratic polynomial here

brainly.com/question/28988445

#SPJ4

The value of the x is 5√3 after we successfully do the application of the 30°-60°-90° Triangle theorem.

The 30°-60°-90° Triangle Theorem states that in such a triangle, the side opposite the 30° angle is half the length of the hypotenuse, and the side opposite the 60° angle is the product of the length of the hypotenuse and the square root of 3 divided by 2.

Using this theorem, we can write:

y = hypotenuse

Opposite of 30° angle = 5 = hypotenuse/2

Opposite of 60° angle = x = hypotenuse × (√(3)/2)

Solving for the hypotenuse in terms of y from the first equation, we get:

hypotenuse = 5×2 = 10

Substituting this value into the third equation, we get:

x = 10 × (√(3)/2) = 5 × √(3)

To know more about hypotenuse, visit:

https://brainly.com/question/29407794

#SPJ1

Answer:

To shift the graph of f(x) = |x| to have a domain of [-3, 6], we need to move the left endpoint from -6 to -3 and the right endpoint from 3 to 6.

A translation to the right by 3 units will move the left endpoint of the graph of f(x) to -3, but it will also shift the right endpoint to 6 + 3 = 9, which is outside the desired domain.

A translation to the left by 3 units will move the right endpoint of the graph of f(x) to 3 - 3 = 0, which is outside the desired domain.

A translation upward or downward will not change the domain of the graph, so options B and D can be eliminated.

Therefore, the correct answer is C g(x) = x - 3. This translation will move the left endpoint to -3 and the right endpoint to 6, which is exactly the desired domain.

The matches of Histogram, Bin, Descriptive Statistics, Mean, Median and Standard Deviation are C, E, D, A, F, G and B respectively.

The Match the definition are given.

Histogram - C). is a graph of the frequency distribution of a set of data

Bin - E). a group in a histogram

Descriptive Statistics - D). values calculated from a data set and used to describe some basic characteristics of the data set

Mean - A). The scatter around a central point

Median - F). the middle value of a sorted set of data

Mode - G). is the most commonly occurring value in a data set

Standard Deviation - B). is a measure of a data’s variability

To know more about Histogram:

https://brainly.com/question/30354484

#SPJ4

[tex]\text{order does not matter}[/tex]

[tex]\text{sample space}= \text{15 letters}[/tex]

[tex]\text{no repetition}[/tex]

[tex]\text{P(A)}= \text{15C5}= \text{3003 ways}[/tex]

a) Number of one-to-one functions are equal to the zero, because n< m.

b) Number of one-to-one functions are equal to the ⁵P₅ = 120.

c) Number of one-to-one functions are equal to the ⁶P₅ = 720.

c) Number of one-to-one functions are equal to the ⁷P₅ = 2250.

One to one function is a special form of function that defined from one set to another and maps every element of the range to exactly one element of its domain unique output. As we know a set A has m elements and set B has n elements, then

Now, we have a domain set with five elements, m = 5

a) Here, another set (co-domain) has 4 elements, n = 4. So, Number of one-to-one functions = 0 , n<m.

b) number of elements in another set,n= 5

So, Number of one-to-one functions = ⁵P₅ = 5!/(5 - 5 )! ( permutation formula)

= 5!/0! = 120

c) Number of elements in another set, n= 6

So, Number of one-to-one functions= ⁶P₅

= 6!/(6 - 5)!

= 6!/1! = 720

d) Number of elements in another set, n

= 7

So, Number of one-to-one functions

= ⁷P₅ = 7!(7 - 5)!

= 7!/2! = 2250

Hence, required value is 2250.

For more information about one-to-one function, visit :

https://brainly.com/question/28281339

#SPJ4

Therefore, A, B, C, and F are the proper responses as the congruence theories or postulates based on the data.

Having three straight sides and three angles where they intersect, a triangle is a closed, two-dimensional shape. It is one of the fundamental geometric shapes and has a number of characteristics that can be used to study and resolve issues that pertain to it. The triangle inequality theory states that the sum of a triangle's interior angles is always 180 degrees, and that the longest side is always the side across from the largest angle. Triangles can be used to solve a wide range of mathematical issues in a variety of disciplines and can be categorised based on the length of their sides and the measurement of their angles.

given

We can use the following congruence theories or postulates based on the data in the diagram:

A. ASA

B. AAS

C. LL (corresponding angles hypothesis)

F. SAS

Therefore, A, B, C, and F are the proper responses as the congruence theories or postulates based on the data.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

From the discriminant of the give quadratic equation, the temperature of the machine will part after 50 minutes of operation.

The given equation that models the temperature of the machine is;

T = -0.005x² + 0.45x + 125

Let check if there's a value that exists for T = 135

Putting T = 135 in the given equation,

135 = -0.005x² + 0.45x + 125

We can simplify this to;

0.005x² - 0.45x + 10 = 0

From the general form of quadratic equation which is ax² + bx + c = 0, where a = 0.005, b = -0.45, and c = 10.

The discriminant of this quadratic equation is given by:

D = b² - 4ac

= (-0.45)² - 4(0.005)(10)

= 0.2025 - 0.2

= 0.0025

The discriminant of the equation is positive which indicates we have two roots. Therefore, the temperature of the machine part will cross 135°F at some point during the operation.

We can also find the roots of the quadratic equation using the formula:

[tex]x = (-b \± \sqrt(D)) / 2a[/tex]

Substituting the values of a, b, and D, we get:

[tex]x = (0.45 \± \sqrt(0.0025)) / 2(0.005)\\= (0.45 \± 0.05) / 0.01[/tex]

Taking the positive value, we get:

x = 50

Therefore, the temperature of the machine part will cross 135°F after 50 minutes of operation.

Learn more on discriminant here;

https://brainly.com/question/12526527

#SPJ1

Answer:

See below.

Step-by-step explanation:

We can solve this linear programming problem using the simplex method. We will start by converting the problem into standard form

Maximize z = 3x₁ + 5x₂ + 0s₁ + 0s₂

subject to

x₁ - 5x₂ + s₁ = 35

3x₁ - 4x₂ + s₂ = 21

x₁, x₂, s₁, s₂ ≥ 0

Next, we create the initial tableau

Basis x₁ x₂ s₁ s₂ RHS

s₁ 1 -5 1 0 35

s₂ 3 -4 0 1 21

z -3 -5 0 0 0

We can see that the initial basic variables are s₁ and s₂. We will use the simplex method to find the optimal solution.

Step 1: Choose the most negative coefficient in the bottom row as the pivot element. In this case, it is -5 in the x₂ column.

Basis x₁ x₂ s₁ s₂ RHS

s₁ 1 -5 1 0 35

s₂ 3 -4 0 1 21

z -3 -5 0 0 0

Step 2: Find the row in which the pivot element creates a positive quotient when each element in that row is divided by the pivot element. In this case, we need to find the minimum positive quotient of (35/5) and (21/4). The minimum is (21/4), so we use the second row as the pivot row.

Basis x₁ x₂ s₁ s₂ RHS

s₁ 4/5 0 1/5 1 28/5

x₂ -3/4 1 0 -1/4 -21/4

z 39/4 0 15/4 3/4 105

Step 3: Use row operations to create zeros in the x₂ column.

Basis x₁ x₂ s₁ s₂ RHS

s₁ 1 0 1/4 7/20 49/10

x₂ 0 1 3/16 -1/16 -21/16

z 0 0 39/4 21/4 525/4

The optimal solution is x₁ = 49/10, x₂ = 21/16, and z = 525/4.

Therefore, the maximum value of z is 525/4, which occurs when x₁ = 49/10 and x₂ = 21/16.

Answer:

We can use the formula for the area of a rectangle to solve this problem. Let's assume that the length of the top of the bookcase is L and the width is b. Then, we can write:

L × b = 300

Solving for b, we get:

b = 300 / L

Since we don't know the length L, we cannot find the exact value of b. However, we can use the given information to make an estimate. Let's say that the length of the bookcase is 60 inches. Then, we have:

b = 300 / 60 = 5

So, if the length of the bookcase is 60 inches, the width needs to be at least 5 inches to accommodate Bria's soap carving collection. However, if the length is different, the required width will also be different.

The required probability that a household in Maryland with annual income of ,

$90,000 or more is equal to 0.3377.

$50,000 or less is equal to 0.2218.

Annual household income in Maryland follows a normal distribution ,

Median =  $75,847

Standard deviation = $33,800

Probability of household in Maryland has an annual income of $90,000 or more.

Let X be the random variable representing the annual household income in Maryland.

Then,

find P(X ≥ $90,000).

Standardize the variable X using the formula,

Z = (X - μ) / σ

where μ is the mean (or median, in this case)

And σ is the standard deviation.

Substituting the given values, we get,

Z = (90,000 - 75,847) / 33,800

⇒ Z = 0.4187

Using a standard normal distribution table

greater than 0.4187  as 0.3377.

P(X ≥ $90,000)

= P(Z ≥ 0.4187)

= 0.3377

Probability that a household in Maryland has an annual income of $90,000 or more is 0.3377(rounded to four decimal places).

Probability that a household in Maryland has an annual income of $50,000 or less.

P(X ≤ $50,000).

Standardizing X, we get,

Z = (50,000 - 75,847) / 33,800

⇒ Z = -0.7674

Using a standard normal distribution table

Probability that a standard normal variable is less than -0.7674 as 0.2218. This implies,

P(X ≤ $50,000)

= P(Z ≤ -0.7674)

= 0.2218

Probability that a household in Maryland has an annual income of $50,000 or less is 0.2218.

Therefore, the probability with annual income of $90,000 or more and  $50,000 or less is equal to 0.3377 and 0.2218 respectively.

learn more about probability here

brainly.com/question/24111146

#SPJ4

The sample mean is 2.1, the sample variance is 212.5% and the standard deviation is 14.57%

a. The sample mean can be computed as the average of the quarterly percent total returns:

[tex](11.2 - 20.5 + 13.2 + 12.6 + 9.5 - 5.8 - 17.7 + 14.3) / 8 = 2.1[/tex]

So the sample mean is 2.1%, which can be interpreted as the average quarterly percent total return for the stock over the sample period.

b. The sample variance can be computed using the formula:

[tex]s^2 = sum((x - mean)^2) / (n - 1)[/tex]

where x is each quarterly percent total return, mean is the sample mean, and n is the sample size. Plugging in the values, we get:

[tex]s^2 = (11.2 - 2.1)^2 + (-20.5 - 2.1)^2 + (13.2 - 2.1)^2 + (12.6 - 2.1)^2 + (9.5 - 2.1)^2 + (-5.8 - 2.1)^2 + (-17.7 - 2.1)^2 + (14.3 - 2.1)^2 / (8 - 1) = 212.15[/tex]

So the sample variance is 212.15%. The sample standard deviation can be computed as the square root of the sample variance:

[tex]s = \sqrt(s^2) = \sqrt(212.15) = 14.57[/tex]

So the sample standard deviation is 14.57%.

c. To construct a 95% confidence interval for the population variance, we can use the chi-square distribution with degrees of freedom n - 1 = 7. The upper and lower bounds of the confidence interval can be found using the chi-square distribution table or calculator, as follows:

upper bound = (n - 1) * s^2 / chi-square(0.025, n - 1) = 306.05

lower bound = (n - 1) * s^2 / chi-square(0.975, n - 1) = 91.91

So the 95% confidence interval for the population variance is (91.91, 306.05).

d. To construct a 95% confidence interval for the standard deviation (as percent), we can use the formula:

lower bound = s * √((n - 1) / chi-square(0.975, n - 1))

upper bound = s * √((n - 1) / chi-square(0.025, n - 1))

Plugging in the values, we get:

lower bound = 6.4685%

upper bound = 20.1422%

So the 95% confidence interval for the standard deviation (as percent) is (6.4685%, 20.1422%).

Learn more on sample mean here;

https://brainly.com/question/26941429

#SPJ1

The inverse of the coefficient matrix is A^-1 = [-2 2]. The solution to the system of equations is x = -1 and y = 1/5.

To solve the system of equations:

2x + 2y = 1

2x - 3y = 0

We can write this system in matrix form as:

[2 2] [x] [1]

[2 -3] [y] = [0]

The coefficient matrix is:

[2 2]

[2 -3]

To find the inverse of the coefficient matrix, we can use the following formula:

A^-1 = (1/|A|) adj(A)

where |A| is the determinant of A and adj(A) is the adjugate of A.

The determinant of the coefficient matrix is:

|A| = (2)(-3) - (2)(2) = -10

The adjugate of the coefficient matrix is:

adj(A) = [-3 2]

[-2 2]

Therefore, the inverse of the coefficient matrix is:

A^-1 = (1/-10) [-3 2]

[-2 2]

Multiplying both sides of the matrix equation by A^-1, we get:

[x] 1 [-3 2] [1]

[y] = -10 [-2 2] [0]

Simplifying the right-hand side, we get:

[x] [-1]

[y] = [1/5]

Therefore, the solution to the system of equations is:

x = -1

y = 1/5

To know more about inverse of matrix:

https://brainly.com/question/4017205

#SPJ4

_____The given question is incomplete, the complete question is given below:

solve the systems of equations by finding the inverse of the coefficient matrix. a. 2x+2y=1 2x-3y-0

Total number of steps taken by an average man in a year while walking with 7192 steps a day is equals to 2,625,080 steps/year.

Number of steps taken by average man in a day is equals to  7192

Then the total number of steps he takes in a year is equals to,

Calculate it by multiplying the average number of steps per day by the number of days in a year.

There are different ways to define a year,

But assuming a regular calendar year of 365 days, the calculation would be,

Total number of days in a year = 365 days

Total number of steps in a year

= 7192 steps/day x 365 days/year

= 2,625,080 steps/year

Therefore, on average the man would walk about 2,625,080 steps in a year.

learn more about average here

brainly.com/question/24278457

#SPJ4

The given question is incomplete, I answer the question in general according to my knowledge:

If a man walks with random steps and the average man takes 7192 steps a day about how many steps does the average man take in a year?

Answer:

x = 7

Step-by-step explanation:

The two angles are equal so the opposite sides are equal.

5x-2 =33

Add two to each side.

5x-2+2 = 33+2

5x=35

Divide by 5

5x/5 =35/5

x = 7

Answer: It's a 80% increase

Step-by-step explanation:

Answer:

The slope of a line passing through two points (x1, y1) and (x2, y2) is given by the formula:

m = (y2 - y1) / (x2 - x1)

Substituting the values, we get:

m = (5 - (-10)) / (6 - 3) = 15/3 = 5

Now that we have the slope, we can use the point-slope form of a linear equation to write the equation of the line:

y - y1 = m(x - x1)

Substituting the values of m, x1, and y1, we get:

y - (-10) = 5(x - 3)

Simplifying and rearranging the equation, we get:

y + 10 = 5x - 15

y = 5x - 25

Therefore, the equation of the line passing through (3,-10) and (6,5) in slope-intercept form is y = 5x - 25.

Step-by-step explanation:

#trust me bro

The calculated coordinates of U if STUV is a kite is (10, 18)

From the question, we have the following parameters that can be used in our computation:

The figute of a kite

Also, we have

S = (0, 18)

And the distance SU to be

SU = 10

If the quadrilateral STUV is a kite, then the coordinates S and U are on the same horizontal level (according to the figure)

So, we have

U = (0 + 10, 18)

Evaluate

U = (10, 18)

Hence, the coordinates of U if STUV is a kite is (10, 18)

Read more about distance at

https://brainly.com/question/31617619

#SPJ1