Answer:
12.09 L
Explanation:
Step 1: Convert 826.1 mmHg to atm
We will use the conversion factor 760 mmHg = 1 atm.
826.1 mmHg × 1 atm/760 mmHg = 1.087 atm
Step 2: Convert 427.8 J to L.atm
We will use the conversion factor 101.3 J = 1 L.atm.
427.8 J × 1 L.atm/101.3 J = 4.223 L.atm
Step 3: Calculate the change in the volume
Assuming the work done (w) is 4.223 L.atm against a pressure (P) of 1.087 atm, the change in the volume is:
w = P × ΔV
ΔV = w/P
ΔV = 4.223 L.atm/1.087 atm = 3.885 L
Step 4: Calculate the final volume
V₂ = V₁ + ΔV
V₂ = 8.20 L + 3.885 L = 12.09 L
20)
Which substance is an acid?
A)
Ba(OH)2
B)
CH3COOCH3
C)
H3PO4
D)
NaCl
help
Answer:
C.
Explanation:
Also, please help me in my questions tab if you can! Thank you so much
Question on the image
Answer: The mass of carbon dioxide required is 308 g
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of octane = 100.0 g
Molar mass of octane = 114.23 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of octane}=\frac{100.0g}{114.23g/mol}=0.875mol[/tex]
For the given chemical reaction:
[tex]2C_8H_{18}+25O_2\rightarrow 16CO_2+18H_2O[/tex]
By the stoichiometry of the reaction:
2 moles of octane produces 16 moles of carbon dioxide
So, 0.875 moles of octane will produce = [tex]\frac{16}{2}\times 0.875=7mol[/tex] of carbon dioxide
Molar mass of carbon dioxide = 44 g/mol
Plugging values in equation 1:
[tex]\text{Mass of carbon dioxide}=(7mol\times 44g/mol)=308g[/tex]
Hence, the mass of carbon dioxide required is 308 g
unsa ang karaan nga duwa saonang panaho
Answer:
Ang kasaysayan ng mga laro ay nagmula sa sinaunang nakaraan ng tao. Ang mga laro ay isang mahalagang bahagi ng lahat ng mga kultura at isa sa pinakamatandang anyo ng pakikipag-ugnay sa lipunan ng tao. Ang mga laro ay gawing pormal na pagpapahayag ng paglalaro na nagpapahintulot sa mga tao na lumampas sa agarang imahinasyon at magdirekta ng pisikal na aktibidad. Kasama sa mga karaniwang tampok ng mga laro ang kawalan ng katiyakan sa kinalabasan, napagkasunduang panuntunan, kumpetisyon, magkakahiwalay na lugar at oras, mga elemento ng kathang-isip, mga elemento ng pagkakataon, iniresetang mga layunin at personal na kasiyahan.
Nakukuha ng mga laro ang mga ideya at pananaw sa mundo ng kanilang mga kultura at ipinapasa sa hinaharap na henerasyon. Ang mga laro ay mahalaga bilang mga kaganapan sa pagbubuklod ng kultura at panlipunan, bilang mga tool sa pagtuturo at bilang mga marka ng katayuan sa lipunan. Bilang pampalipas ng oras ng pagkahari at ng mga piling tao, ang ilang mga laro ay naging karaniwang tampok ng kultura ng korte at binigyan din bilang mga regalo. Ang mga larong tulad ni Senet at ang Mesoamerican ball game ay madalas na pinuno ng mitiko at ritwal na relihiyosong kahalagahan. Ang mga larong tulad ng Gyan chauper at The Mansion of Happiness ay ginamit upang magturo ng mga aralin na pang-espiritwal at etikal habang sina Shatranj at Wéiqí (Go) ay nakita bilang isang paraan upang mapaunlad ang madiskarteng pag-iisip at kasanayan sa kaisipan ng mga elite sa politika at militar.
What word means the same as Chordata?
A. non-vertebrate
B. vertebrate
How many photons are produced in a laser pulse of 0.203 J at 553 nm?
Answer:
8.59
⋅
10
17
Explanation:
You can start by figuring out the energy of a single photon of wavelength
505 nm
=
505
⋅
10
−
9
m
.
To do that, use the equation
E
=
h
⋅
c
λ
Here
h
is Planck's constant, equal to
6.626
⋅
10
−
34
.
J s
c
is the speed of light in a vacuum, usually given as
3
⋅
10
8
.
m s
−
1
λ
is the wavelength of the photon, expressed in meters
Plug in your value to find--notice that the wavelength of the photon must be expressed in meters in order for it to work here.
E
=
6.626
⋅
10
−
34
J
s
⋅
3
⋅
10
8
m
s
−
1
505
⋅
10
−
9
m
E
=
3.936
⋅
10
−
19
J
So, you know that one photon of this wavelength has an energy of
3.936
⋅
10
−
19
J
and that your laser pulse produces a total of
0.338 J
of energy, so all that you need to do now is to find how many photons are needed to get the energy output given to you.
0.338
J
⋅
1 photon
3.936
⋅
10
−
19
J
=
8.59
⋅
10
17
photons
−−−−−−−−−−−−−−−−−
The answer is rounded to three sig figs.
Beer's Law states that A=ebc, where A is the absorbance, ε is the molar absorptivity of the solute, b is the path length, and c is the concentration. Identify the experimental evidence from the activity that you have for the dependence of absorbance on each variable
The evidence for the dependence of absorbance on the variable ε is:_________
a. increasing the cuvette width increases the absorbance.
b. changing the compound changes the absorbance behavior.
c. adding more water decreases the absorbance.
Answer:
b. changing the compound changes the absorbance behavior.
Explanation:
Option a) would be akin to modifying the path length, b.Option b) would involve using a different solute, as such, there would be another molar absortivity, ε.Option c) would decrease the concentration (c) of the solute, which would explain why the absorbance would decrease as well.How many moles of fluorine are in 100.0 g
What was one idea Dalton taught about atoms?
Explanation:
All atoms of one type were identical in mass and properties.
g a commercial product for treating injuries contains 35.0 g of MgSO4 in one bag and 250 mL of water in a seperate bag. When the bags are broken and their contents mixed, the temperature of the system changes. Calculate this temperature change
Answer:
he a real G
Explanation:
og tripple og
How many molecules are there in 4.27 mol of tungsten(VI) oxide, WO3
Answer:
Molar mass of WO3 = 231.8382 g/mol Convert grams Tungsten(VI) Oxide to moles or moles Tungsten(VI) Oxide to grams Molecular weight calculation: 183.84 + 15.9994*3Explanation:
#hopeithelpsbrainliest me later.25.71 × 10²³ molecules are there in 4.27 mol of tungsten (VI) oxide, [tex]WO_3[/tex].
How to find the number of molecules ?To find the Number of molecules of substance multiply the number of moles of given substance by Avogadro number
Number of molecules = Number of moles × Avogadro's Number
Avogadro's NumberAvogadro's number [tex](N_{A})[/tex] is the number of particles in one mole of substance. 6.023 × 10²³ is known as Avogadro's constant / Avogadro's number.
Avogadro's number = 6.023 × 10²³ [tex]mol^{-}[/tex]
Now,
Number of molecules in 4.27 moles of [tex]WO_{3}[/tex]
= Number of moles of [tex]WO_{3}[/tex] × Avogadro's Number
= 4.27 × 6.023 × 10²³
= 25.71 × 10²³ molecules
Thus, we can say that 25.71 × 10²³ molecules are there in 4.27 moles of tungsten (VI) oxide, [tex]WO_3[/tex].
Learn more about the Avogadro's Number here: https://brainly.com/question/859564
#SPJ2
Given the Vapour Density of a hydrocarbon is 150, what is it's molecular formula.
Almost 99% of Earth's atmosphere is made up of two gases. What are the two gases and the percents of each?
A)
21% oxygen and 78% nitrogen
B)
21% water vapor and 78% oxygen
09
21% nitrogen and 78% oxygen
D)
21% carbon dioxide and 78% oxygen
given two equations representing reactions: which type of reaction is represented by each of these equations?
Answer:
Equation 1 - nuclear fission
Equation 2 - nuclear fusion
Explanation:
Nuclear fission is a reaction in which a large nucleus is split into smaller nuclei when it is bombarded by neutrons. The process produces more neutrons to continue the chain reaction. This is clearly depicted in equation 1 as shown in the question.
Nuclear fusion is a reaction in which two light nuclei combine in order to form a larger nuclei. This is clearly depicted in equation 2 as shown in the question.
In the first reaction, a neutron is released, and in the second a helium atom is released. The given two equations represent nuclear fission and fusion.
What are nuclear reactions?A nuclear reaction is a reaction that involves the nuclei of the atom and the absorption and release of energy. In the first reaction, a big nucleus is split by the neutron bombardment into smaller nuclei.
In the second reaction the process of nuclear fusion, two nuclei combine into a single larger nucleus that is shown as:
₁¹H+ ²₁H → ³₂He
Therefore, nuclear fission and fusion are represented by each of these equations.
Learn more about nuclear reactions here:
https://brainly.com/question/16526663
#SPJ5
Phosphorus trichloride can be made by the following reaction: P4(s) 6Cl2(g) - 4) 4PCl3(l) What is the maximum amount of phosphorus trichloride that can be formed if 15 molecules of P4 are mixed with 42 molecules of chlorine
Answer:
48 molecules
Explanation:
From the given reaction:
[tex]\mathtt{P_4 + 6Cl_2\to 4PCl_3}[/tex]
i.e. 1 mole of Phosphorus react 6 moles of chlorine to yield 4 moles of PCl₃
This implies that for each P₄ molecule, we will require 6 molecules of Cl₂
We are provided with 15 molecules of P₄ and 42 molecules of Cl₂
Suppose we utilized the whole 15 molecules of P₄, we will require:
= 15 × 6 = 90 moles of Cl₂ which is not readily available except 42 are available.
If we utilized 42 molecules of Cl₂, we will require 42/6 = 7 molecules of P₄ which is readily available.
From this analysis, we can opine that Cl₂ serves as the limiting agent
∴
P₄ : Cl₂ : PCl₃ = 1 : 6 : 4 = 7 : 42 : 48
It implies that only 48 molecules of phosphorus trichloride will be formed.
The largest number of stable nuclei have an ________ number of protons and an ________ number of neutrons.
Answer:
did it give you answers to in blanks
A. Direction: Identify the word or phrase being described in the sentence. Write your
answers in your notebook.
1. It is an electronic measuring instrument that combines several
measurement functions in one unit.
2. In diodes, what do the silver stripe represents?
3. This is an Electronic/Electrical component that stores energy in
the form of Electric Charge.
4. This allows you to change the function between volts, ohms, and
amps, and to change the scale of the meter.
5. In testing capacitor, if the multimeter shows very low resistance,
it means that the capacitor is .
6. These are components used to resist the flow of electric current.
7. It is a system used to determine the value of a resistor without
using a multimeter.
8. What defective capacitor that shows very low Resistance?
9. A type of transformer that is used to increase the output voltage.
10. A type of transformer that is used to decrease the output voltage.
Answer:
1. Multimeter
2. Cathode
3. Capacitor
4. Selector switch
5. Short or Shorted
6. Resistors
7. Resistor color coding
8. Open Capacitor
9. Step-up transformer
10. Step-down transformer
Explanation:
The above-described elements are electronic components. Resistors for instance are designed to resist the flow of electric current. They are also standardized such that a deviation from the set resistance level will indicate a problem. The capacitor is another electrical component that stores energy as an electrical charge. Knowledge of these electrical components and the ways they are tested will make a person proficient in electrical electronics.
What is the density of the football
Answer:
Mass of the ball is . 42 kg. The density of air is 1.2 kg/m3.
Explanation:
sound waves? like what they do.
Answer:
A sound wave is the pattern of disturbance caused by the movement of energy traveling through a medium (such as air, water, or any other liquid or solid matter) as it propagates away from the source of the sound. The source is some object that causes a vibration, such as a ringing telephone, or a person's vocal chords.
HEY. HOPE THIS HELPS♡
how many s electrons are there in potassium?
Answer: 19
Explanation:
In order to write the Potassium electron configuration we first need to know the number of electrons for the K atom (there are 19 electrons). When we write the configuration we'll put all 19 electrons in orbitals around the nucleus of the Potassium atom.
Classify each of the following as a Strong acid (sa) or a Weak acid (wa) and indicate how each should be written in aqueous solution.
1. hydrobromic acid
2. hydrochloric acid
3. carbonic acid
Write a net ionic equation for the reaction that occurs when aqueous solutions of hydrochloric acid and barium hydroxide are combined.
Answer:
A. 1. Strong acid (sa): Hydrobromic acid: HBr (aq)
2. Strong acid (sa); Hydrochloric acid: HCl (aq)
3. Weak acid (wa); Carbonic acid: H₂CO₃ (aq)
B. H+ (aq) + OH- (aq) ----> H₂O (l)
Explanation:
Strong acids are which ionize completely in aqueous solution into hydrogen ions and the corresponding anion. Examples of strong acids include hydrobromic acid, hydrochloric acid, tetraoxosulfate (vi) acid.
The ionization of hdyrobromic and hydrochloric acids in aqueous solution is given below:
1. Hydrobromic acid: HBr (aq) ----> H+ (aq) + Br- (aq)
Hydrobromic acid in aqueous solution ionizes completely into hydrogen ions and bromide ions
2. Hydrochloric acid: HCl (aq) ----> H+ (aq) + Cl- (aq)
Hydrochloric acid in aqueous solution ionizes completely into hydrogen ions and chloride ions
Weak acids are acids which ionizes only partially in aqueous solutions to hydrogen ions and the corresponding anions. Examples of weak acids are carbonic acid and ethanoic acid. The ionization of carbonic acid in aqueous solution is shown below:
3. Carbonic acid: H₂CO₃ (aq) ⇄ 2 H+ (aq) + CO₃²- (aq)
Carbonic acid ionizes partially only to give hydrogen ions and trioxocarbonate (iv) ions. The unionized acid exists in equilibrium with the ions produced by the partial ionization of the acid.
Part B:
The reaction between hydrochloric acid and barium hydroxide is a neutralization reaction producing barium chloride salt and water.
The net ionic equation of the neutralization reaction is given below :
H+ (aq) + OH- (aq) ----> H₂O (l)
P4 + NaOH + H2O——> PH3 + Na2HPO3
Balance given equation by oxidation no. Method
Answer:
P4 + 4NaOH + 2H2O → 2PH3 + 2Na2HPO3
Explanation:
A chemical equation is said to be balanced if the quantity of each type of atom in the reaction is the same on both the reactant and product sides. In a balanced chemical equation, the mass and the charge are both equal.
A chemical equation must balance according to the rule of conservation of mass. According to the rule, mass cannot be generated or removed during a chemical process.
Chemical equations must be balanced, which means that the atom types and numbers on both sides of the reaction arrow must match. Coefficients are the values added in front of formulas to balance equations; they multiply each atom in a formula.
Here the given equation is balanced as:
P₄ + 4NaOH + 2H₂O——> 2PH₃ + 2Na₂HPO₃
To know more about balanced equation, visit;
https://brainly.com/question/32997814
#SPJ6
3. How many electrons are in the M shell?
Answer:
i believe the answer is D: 18
Explanation:
Answer:
18
M shell can actually hold 18 electron as you move higher atomic number
Using the periodic table,
choose the more reactive nonmetal. Br or as
Answer:
Br
Explanation:
because bromine is more reactive as reactivity increases on moving from left to right in p-block. hope this make sense :)
Completa las siguientes reacciones, nombrando todos los compuestos que intervienen:
a) CH2=CH2 + energía
b) CH2=CH2 + H2O
c) CH2=CH2 + HCl
d) CH2=CH2 + Cl2
e) CH2=CH2 + H2
2 Completa las siguientes reacciones, nombrando todos los compuestos que intervienen:
a) CH4 + Cl2
b) CH2=CH2 + H2O
c) CH≡CH + H2
d) CH3-COOH + KOH
e) CH3OH + CH3-COOH
3 Completa y ajusta la siguientes reacciones nombrando todos los compuestos que intervienen en cada una de ellas:
a) CH3-COOH + NaOH
b) CH3-CH2I + NH3
c) CH2=CH2 + H2O
d) CH3-CH=CH2 + Br2
Answer:
1
Explanation:
hhihh2
A certain shade of blue has a frequency of 7.28×1014 Hz.
What is the energy of exactly one photon of this light? Planck's constant is ℎ=6.626×10−34 J⋅s.
Explanation:
the enerfy of of one photon of this light is 4.85x10^-19 J
E= 6.63 x 10^-34 J/S x 7.32 x10^14 S ^-1E= 4.85x10^-19 J
What is one way in which a field investigation can differ from a classroom or laboratory experiment?
Answer:
□In field investigations, you are usually working with much larger animals than in the lab. In field investigations, it is much more difficult to separate your control and experimental groups.
There are many ways in which a field experiment can differ form of a classroom or a laboratory experiment, one of which can be the environmental condition.
What is a field experiment?A field experiment Is an experiment which is performed in practically Outside the classroom or a laboratory in live situtations .
Environmental factors may deter the results of a field experiment or may alter the physical conditions of the object, For example an anhydrous substance may become hygroscopic, Which may Alter the result of the field experiment.
Hence, field experiment can differ from a classroom or a laboratory experiment due to environmental conditions .
Learn more about laboratory Experiment.
https://brainly.com/question/13142627
#SPJ2
How did the development of the earliest idea about atoms differ from the later work of scientists?
It was based on sound evidence.
There were explanations for the idea.
It was based on the thoughts of an early philosopher.
There were experiments conducted to support the idea.
Answer:
C. It was based on the thoughts of an early philosopher.
Draw the structural formula for both of these alcohols:
2,3, 4-trimethyl, 3-heptanol
4-ethyl, 4-octanol
Answer:
Check the image above
explanation:
When naming organic compounds based on IUPAC; we take note of functional group, position of functional group.
In 2,3,4-trimethyl-3-heptanol, the functional group is hydroxyl group ( OH ). It is on position 3 (2,3,4-trimethyl-3-heptanol. Then we put it on the third carbon. Another functional group is methyl group, with three positions, 2, 3, and 4.
In 4-ethyl-4-octanol, the functional group is hydroxyl group ( OH ) which is in position 4 on the fourth carbon. Another functional group is ethyl group in position 4 on the fourth carbon. In this case, the functional groups that have same position, are put on that same carbon.
A sample of gas with an initial volume of 9.35 L at a pressure of 784 torr and a temperature of 295 K is compressed to a volume of 2.84 L and warmed to a temperature of 310 K. What is the final pressure of the gas in atmospheres (atm)?
a. 4.97 atm.
b. 0.113 atm.
c. 5.95 atm.
d. 7.03x10^3 atm.
Answer:
D
Explanation:
The chemical formula for an emerald is Be3Al2(SiO3)6. An emerald can be described as
Answer:
Emerald is a compound made of Beryllium, Aluminium, Silicon and Oxygen with the formula, Be3Al2(SiO3)6
Explanation:
Answer:
A pure substance because its a compound
Explanation:
