Which of the following would not be considered matter?
clouds
trees
rain
air
light
Answer:
light
Explanation:
Have a nice day
Answer:
light
Explanation:
Which of the following olosaic structures represents a poskwe 9 protons, 10 mentions and 10 elections 12 protons, 1814 neutrons and 12 elections 12 protons, 12 neutrons and 10 elections
Answer:
migraine
Explanation:
d
Unknown # 21
Flame Test Color: Lilac
Addition of HCl(aq)= NR (No Reaction)
Addition of HCl(aq) and BaCl2(aq)= White precipitate
Addition of HNO3(aq) and AgNO3(aq)= NR (No Reaction)
What is the unknown ionic compund molecular formula?
Write down the constituent elements present in the following compounds.
a. Sodium Sulphate
b. Baking Soda
c. Limestone
d. Bleaching powder
e. Ammonia
f. Caustic Soda
g. Glucose
h. Ammonium Carbonate
I. Acetic acid
j. sulphuric acid
Answer:
in sodium sulphate there is sodium an sulphur
In an exothermic reaction, heat is
released into the surroundings. How does this affect entropy?
particles in the surroundings move slower and have decreased entropy.
• B. The particles in the surroundings move faster and have increased entropy.
•C. The particles in the surroundings move
surroundings move slower and have increased entropy.
• D. The entropy is not affected by this.
Answer:
B. the particles in the surroundings move faster and have increased entropy
Explanation:
An exothermic process releases heat, causing the temperatures of the surroundings to increase. Entropy increases as temperature increases. Since an exothermic reaction releases heat to the surroundings, molecules in the surroundings will begin to move faster because they will absorb more energy, which increases their kinetic energy. An increase in temperatures means that the particles of the surroundings have greater kinetic energy. The faster moving particals have more disorder than particles that are moving more slowly at a lower temperature. Entropy is interpreted as the degree of disorder/randomness.
Can you tell me name of chemicals in sea Please?
this is my attachment answer hope it's helpful to you
What is occurring during boiling?
A. Solvent particles increase in kinetic energy until they knock solute particles out of the solution and into the air.
B. Solute particles increase in kinetic energy until they knock solvent particles out of the solution and into the air.
C. Vapor pressure is greater than atmospheric pressure and water molecules escape from the solution into the air.
D. Atmospheric pressure is greater than vapor pressure, and water molecules escape from the solution into the air.
Reset Selection
Answer:
D: Atmospheric pressure is greater than vapor pressure,and water molecules escape from the solution into the air.
Atmospheric pressure is greater than vapor pressure, and water molecules escape from the solution into the air, which occurs during boiling. The correct option is D.
What is boiling?Boiling is a process when more heat is given to any liquid, it starts to boil. When the temperature is increased, boiling happens, but only in liquid. The molecules of liquid start to turn into vapor and start to escape into the atmosphere.
It is also called the vaporization of the liquid. The boiling points of different liquids are different, and they start to boil at their own temperature.
Thus, the correct option is D. Water molecules escape from the solution into the air when atmospheric pressure exceeds vapor pressure.
Learn more about boiling, here:
https://brainly.com/question/1416592
#SPJ5
Which of the following is an example of combustion?
O A. potassium chlorate -> potassium chloride + oxygen
B. aluminum + cobalt chloride -> aluminum chloride + cobalt
O c. hexane + oxygen carbon dioxide + water
OD. sodium cyanide + hydrochloric acid -> sodium sulfate + hydrogen cyanide
What is an atomic mass unit? Write down the electric charge of proton neutrons and electric.
Answer:
protons has a positive charge.
Neutrons does not have a charge (neutron = neutral)
Electrons has a negative charge
Một hỗn hợp X gồm CH3OH; C2H5OH; phenol có khối lượng 28,9 gam phản ứng vừa hết với 100ml dung dịch NaOH 2M. Phần trăm theo khối lượng phenol là ? Biết C = 12; O = 16; H = 1; Na = 23. *
Answer:
nNaOH = 0,2 mol
Trong hỗn hợp các chất đề bài cho chỉ có phenol tác dụng với NaOH
C6H5OH + NaOH → C6H5ONa + H2O
0,2 ← 0,2 (mol)
⟹ mphenol = 0,2.94 = 18,8 gam
⟹
%mC6H5OH=18,8/28,9 x100%= 65,05%
Explanation:
Am I correct?
(Plz don’t used this for points or typing random things…plz don’t)
Answer and Explanation:
The answers would be:
A. Domestic cats live in about 34% of homes in the United States. (Statistical statements are, most of the time, facts and not an opinion)
C. Modern domestic cats are closely related to Near Eastern wildcats. (Fact)
D. Cats eat rodents that can spread disease. (Fact)
The above statements are facts because they don't make a judgement or show a position on the topic, only show what is known and proven to be true.
B and E are incorrect because they take a side of the topic, in which someone else might disagree with the opinion. These opinions aren't proven to be true.
#teamtrees #PAW (Plant And Water)
I hope this helps!
What is required for dynamic equilibrium?
A. A closed system.
B. The forward and backward reactions occur under the same conditions.
C. A reversible reaction.
D. All of these
Answer:
A. all of them
Explanation: Edtell
what is cytoplasm ? what does it contain?
Answer:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm.
Answer:
Explanation:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm. ...
Which statement describes the law of conservation of energy?
All systems will exchange matter and energy with their surroundings.
All systems can exchange energy, but not matter, with their surroundings.
Energy cannot be created nor destroyed, but it changes from one form to another.
Energy is destroyed in most chemical reactions when new products are formed.
Answer:
All systems will exchange matter and energy with their surroundings.
Explanation:
Answer:c
Explanation:
Are you ready kids?
Aye, aye Captain.
I can't hear you!
AYE, AYE CAPTAIN!
Oooooooooh.
Who lives in a pineapple under the sea?
Spongebob squarepants!
Absorbent and yellow and porous is he?
Spongebob squarepants!
If nautical nonsense be something you wish!
Spongebob squarepants!
Then drop on the deck and flop like a fish!
Spongebob squarepants!
Ready?
Spongebob squarepants.
Spongebob squarepants.
Spongebob squarepants.
Spongebob squarepants.
Spongebob-squarepants.
Bài 19 với ạ, ai giúp em với ❤️❤️❤️❤️❤️
Answer:
we're are u from
Explanation:
also the writing from that paper look really cool
Match each step of the scientific method with its matching example.
Match Term Definition
A) The growth of green algae is recorded every day for several weeks and compared
B) The data recorded in the experiment supports the hypothesis about how algae reproduce.
C) Based on what other scientists have done, algae life cycles are affected by light.
D) Under the same temperature and water conditions, green algae is grown under natural light, blue light, and green light.
Experiment
Conclusion
Research
Analysis
Answer: I did the quiz and got it correct
Explanation:
Biosphere- B
Ecosystem- C
Biome- D
Habitat- A
Scientific Method
What is Scientific Method
A method or procedure that consists of systematic observation, measurement, and experiment, and the formulation, testing, and modification of hypotheses.
Experiment- The growth of green algae is recorded every day for several weeks and compared
Conclusion- Under the same temperature and water conditions, green algae is grown under natural light, blue light, and green light.
Research-Based on what other scientists have done, algae life cycles are affected by light.
Analysis- The data recorded in the experiment supports the hypothesis about how algae reproduce.
For more information visit
https://brainly.com/question/497944
if 1.35 g of aluminum occupies 0.500 cm^3. what is the density of aluminum
Answer:
2.7
Explanation:
Density= mass/volume
= 1.35/0.500
= 2.7
A place where animals are protected in their natural habitat is called ------------------
answer is wildlife sanctuary
Answer:
a wildlife sanctuary
Explanation:
How many joules of energy are required to melt 125 g of water?
Answer for this question is 45,000
Energy is referred to by scientists as the capacity for work. People have figured out how to transform energy from one form to another and then use it to accomplish tasks, making modern civilization possible.
Explain about the energy?Energy is the ability to do tasks. It can exist in various forms, including potential, kinetic, thermal, electrical, chemical, and nuclear.
Energy can take on a variety of shapes. Examples of these include: electrical energy, sound energy, chemical energy, nuclear or atomic energy, light energy, heat energy, mechanical energy, gravitational energy, and so on. Each form has the ability to shift or transform into the others.
The sun is one of the most significant energy sources. Most of the energy on earth comes from the sun, which is where it all began. We get
Answer for this question is 45,000
To learn more about energy refer to:
https://brainly.com/question/13881533
#SPJ2
Type the correct answer in the box. Express your answer to two significant figures. You are performing a reaction with 1.7 moles of hydroiodic acid and 3.43 moles of zinc bromide: 2HI + ZnBr2 → 2HBr + ZnI2. How many moles of zinc iodide can be made? The theoretical yield is moles of zinc iodide.
Answer:
1.34 34343 he did
Explanation:
i did the test
Answer:
0.85
Explanation:
Is the following change an oxidation or reduction?
manganese (IV) oxide to manganese (III) oxide.
Answer:
12113
Explanation:
step by step:no
what does porous mean
Answer:
porous = allowing liquid or air to pass through slowly
I hope it's helpful
Answer:
It is a rock or or other materials, having minutes interstices through which liquid or air may pass.
Which of the following should NOT be used to hold chemicals while they are being heated?
Question 5 options:
test tube
weigh boat
beaker
crucible
Answer: Weigh boat
Explanation:
they are disposable and will likely melt
Weigh boat among the following should not be used to hold chemicals while they are being heated ,therefore option (b) is correct.
What do you mean by weigh boats ?Weigh boats are ideal for general-purpose weighing, evaporating, dispensing, and storing applications. Compatible with balances and dryers, these pans support precise measurements.
A weigh boat is an open container often used in chemistry and bio chemistry. It is used if you want to weigh a sample very accurately.
A weigh boat is an object that is used to protect your balance from any object you want to weigh.
Weigh boat among the following should not be used to hold chemicals while they are being heated ,hence option (b) is correct.
Learn more about weigh boats ,here:
https://brainly.com/question/14555250
#SPJ2
A student conducts an experiment to determine how the temperature of water affects the time for sugar to dissolve. In each trial, the student uses a different amount of water and a different temperature of water. What is wrong with this experimental design? A.The student changed more than one independent variable. B.The student did not change enough independent variables. C.The student needs to perform more trials. D.The student does not have a dependent variable.
What is wrong with the experimental design is that the student changed more than one independent variable.
WHAT AN EXPERIMENT SHOULD CONTAIN?
An experiment is a procedural method of solving a scientific problem or answering a scientific question. An ideal experiment should contain two variables namely: independent variable and dependent variable. Dependent variable: This is the variable that the experimenter measures in the experiment. The dependent variable responds to changes made to the independent variable. Independent variable: This is the variable that is manipulated in an experiment in order to bring about a response.In the experiment conducted by the student in this question in order to determine how the temperature of water affects the time for sugar to dissolve. The independent variable is the DIFFERENT TEMPERATURE OF WATER while the dependent variable is the TIME TAKEN FOR SUGAR TO DISSOLVE.
N.B: An experiment should have only one independent variable and all other variables should be kept constant. This is to have a reliable result.
However, this student used two independent variables (temperature and amount of water) for the experiment, which is wrong for the experimental design.Therefore, the fact that the student changed more than one independent variable is wrong for the experimental design.
Learn more: https://brainly.com/question/967776
Answer:
The student changed too many variables.
Explanation:
in k-12 took the quiz
****URGENT****
I need help!!!
the answers are there, i need someone to explain please!
Explanation:
your answer was correct
In ionic bonding Question 41 options: the electrons are shared between the atoms. the process of forming an ionic bond is highly endothermic overall. the bonding that occurs is usually between two nonmetal atoms. a noble gas configuration is formed for each element or ion. At least two of the above statements are correct.
Answer: In ionic bonding (a noble gas configuration is formed for each element or ion).
Explanation:
IONIC bonding, which is also called electrovalent bonding involves the complete transfer of electrons from one atom to another in order to attain a noble gas electron configuration.
The noble gases or group 0 elements have a completely filled outermost shell of eight electrons. This makes them generally very stable, that is, unreactive. There is a natural drive for other atoms to attain the electron configuration of group 0 (inert gases) elements. This usually results in atoms entering into chemical combinations by losing, gaining or sharing electrons.
Ionia compound such as sodium chloride
--> have high melting points because alot of heat energy is required to break the attractive forces between the ions;
--> are hard and brittle;
--> are soluble in water;
--> conduct electricity when in solution or molten form because the ions are able to move about, that is, they are electrolytes
6c.Calculate the maximum volume, in dm3, of chlorine gas at Stp that can be obtained from 23.4 tonnes of molten sodium chloride. 1 tonne= 10^6 Mr of NaCl=58.5 molar volume of chlorine at stp= 24dm3 Give your answer in standard format.
Answer:
4.48×10⁶ dm³
Explanation:
We'll begin by converting 23.4 tonnes to grams (g). This can be obtained as follow:
1 tonne = 10⁶ g
Therefore,
23.4 tonnes = 23.4 × 10⁶
23.4 tonnes = 2.34×10⁷ g
Thus, 23.4 tonnes is equivalent to 2.34×10⁷ g
Next, we shall determine the number of mole in 2.34×10⁷ g of NaCl. This can be obtained as follow:
Mass NaCl = 2.34×10⁷ g
Molar mass of NaCl = 58.5 g/mol
Mole of NaCl =?
Mole = mass / molar mass
Mole of NaCl = 2.34×10⁷ / 58.5
Mole of NaCl = 4×10⁵ moles
Next, we shall determine the number of mole of chlorine, Cl₂ produced from the reaction. This can be obtained as follow:
2NaCl —> 2Na + Cl₂
From the balanced equation above,
2 moles of NaCl reacted to produce 1 mole of Cl₂.
Therefore, 4×10⁵ moles of NaCl will react to produce = (4×10⁵ × 1)/2 = 2×10⁵ moles of Cl₂.
Thus, 2×10⁵ moles of Cl₂ were obtained from the reaction.
Finally, we shall determine the volume of Cl₂ produced. This can be obtained as follow:
1 mole of Cl₂ at stp = 22.4 dm³
Therefore,
2×10⁵ moles of Cl₂ at stp = 2×10⁵ 22.4
2×10⁵ moles of Cl₂ at stp = 4.48×10⁶ dm³
Thus, the volume of chlorine obtained from the reaction is 4.48×10⁶ dm³
True or False: All material has the same density.
Answer:
Different materials have different densities. So it is False
Answer:
The answer is False
Can someone help me please
What is te SI unit of time?
Answer:
second (S) is the SI unit of time.
Answer:
second
Explanation:
the gap between any two intervals is called time
time can be measured in hour,minute,second
but second is the SI unit of time
