Answer:
The answer is below
Explanation:
Yes, there are multiple combinations.
Firstly, a solvent or soap combination could be used as a polar solvent with soap. In this way, the nonpolar region of the soap molecules would mix directly with the stain while the solvent would surround the soap-stain micelle.
Secondly, another method or way is to have a combination of a nonpolar solvent with no soap. In this method, however, it is the solvent that would mix directly with the stain.
ACTUAL YIELD VS THEORETICAL YIELD?
Actual yield over theoretical yield, then multiply by 100
In the following reaction, Zn is Zn(s) H2SO4(aq) --> ZnSO4(aq) H2(g) A.Reduced B.Oxidized C.This is not a redox reaction D.An oxidizing agent
Answer: The correct option is B) oxidized
Explanation:
Redox reaction is defined as the reaction in which oxidation and reduction take place simultaneously.
The oxidation reaction is defined as the reaction in which a chemical species loses electrons in a chemical reaction. It occurs when the oxidation number of a species increases.
A reduction reaction is defined as the reaction in which a chemical species gains electrons in a chemical reaction. It occurs when the oxidation number of a species decreases.
For the given chemical reaction:
[tex]Zn+H_2SO_4+S\rightarrow ZnSO_4+H_2[/tex]
On the reactant side:
Oxidation number of H = +1
Oxidation number of Zn = 0
Oxidation number of S = +6
Oxidation number of O = -2
On the product side:
Oxidation number of H = 0
Oxidation number of Zn = +2
Oxidation number of S = +6
Oxidation number of O = -2
As the oxidation number of Zn is increasing from 0 to +2. Thus, it is getting oxidized. Similarly, the oxidation number of H is decreasing from +1 to 0. Thus, it is getting reduced.
Hence, the correct option is B) oxidized
describe how lyophobic sols are synthesize by dispersion method
Explanation:
For preparing lyophobic sol, the substance in bulk is broken down into particles of colloidal dimensions (Dispersion) or aggregating smaller particles into particles of colloidal dimensions (condensation).
Unknown A melts at 113- 114oC. Known compounds 3-Nitroaniline and 4-Nitrophenol both melt at 112-114 oC. If A is mixed with 3-Nitroaniline and the melting point becomes broad and depressed, what must A be __________A) 3-Nitroaniline B) 4-Nitrophenol C) Both
Answer:
C) Both
Explanation:
Whenever we mix any pure form of a compound with some other form of a compound which is not in the other standard pure state, this results in the melting point of mixture to get dispersed and it becomes broad form.
Thus, when a known compound of 3-Nitroaniline mixes with both 3-Nitroaniline and 4-Nitrophenol, the melting point of the compound becomes depressed and board.
Thus the correct option is (C).
Determine the mass in grams of 3.27 × 10²¹ atoms of arsenic. (The mass of one mole of arsenic is 74.92 g.)
Explanation:
74.92 g.
(The mass of one mole of arsenic is 74.92 g.
Compound A, C8H10, absorbed 3 equivalents of H2 on catalytic hydrogenation over a Pd/C catalyst to give B (C8H16). On ozonolysis, compound A gave, among other things, a ketone which was identified as cyclopentanone. On treatment with NaNH2 in NH3, followed by addition of iodomethane, compound A gave a new hydrocarbon, C (C9H12). Draw the structure of Compound A and Compound B.
Answer:
Compound A, C8H10, absorbed 3 equivalents of H2 on catalytic hydrogenation over a Pd/C catalyst to give B (C8H16). On ozonolysis, compound A gave, among other things, a ketone which was identified as cyclopentanone. On treatment with NaNH2 in NH3, followed by addition of iodomethane, compound A gave a new hydrocarbon, C (C9H12). Draw the structure of Compound A and Compound B.
Explanation:
The degree of unsaturation in the given compound A C8H10 is:
DU= (Cn+1)-Hn/2 -Xn/2 +Nn/2
DU=(8+1)-10/2
=9-5
=4
So, the given compound has either three double bonds and a ring or four double bonds or four rings.
Given,
compound A C8H10 absorbed three equivalents of H2 on catalytic hydrogenation that means compound A has three double bonds or it has one double bond and one triple bond.
The structure of compounds A, B and C along with the entire reaction is shown below:
When an electron moves up to higher energy levels, the atom Choose... a photon of light whereas the atom Choose... a photon of light when an electron drops to a lower energy level. The photons emitted from an atom appear as
Answer:
Explanation:
When an electron moves from a lower energy level to a higher energy level, energy is absorbed by the atom. When an electron moves from a higher to a lower energy level, energy is released and photon is emitted.
this emitted photon is depicted as a small wave-packet being expelled by the atom in a well-defined direction.
the mixture of base and acid
Answer:
Mixture of a Strong Acid and a Strong Base
On mixing a strong acid and strong base neutralization (pH = 7) takes place. The resulting solution may be an acid or base depending on the Concentration. Say, N1, V1 is the strength and volume of the strong acid and N2, V2 is the strength and volume of the strong base
Explanation:
Most introductory chemistry books will teach that the reaction between an acid and a base is called neutralization, and the products formed are water and a salt
g The boiling of water is a Question 4 options: chemical and physical damage chemical change because a gas (steam) is given off chemical change because heat is needed for the process to occur physical change because the water merely disappears physical change because the gaseous water is chemically the same as the liquid
Answer:
physical change because the gaseous water is chemically the same as the liquid
Explanation:
Matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.
Generally, matter exists in three (3) distinct or classical phases and these are; solid, liquid and gas.
A physical change can be defined as a type of change that only affects the physical form of a chemical substance (matter) without having any effect on its chemical properties. Thus, a physical change would only affect the physical appearance and properties of a chemical substance (matter) but not its chemical properties.
This ultimately implies that, a physical change result in a change of matter from one form or phase (liquid, solid or gas) to another without a corresponding change in chemical composition.
Hence, the boiling of water is considered to be a physical change because the gaseous water is chemically the same as the liquid i.e there isn't any changes in chemical composition of water when boiling.
A tank at is filled with of sulfur tetrafluoride gas and of sulfur hexafluoride gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction of each gas. Round each of your answers to significant digits.
The question is incomplete, the complete question is:
A 7.00 L tank at [tex]21.4^oC[/tex] is filled with 5.43 g of sulfur hexafluoride gas and 14.2 g of sulfur tetrafluoride gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction and partial pressure of each gas. Round each of your answers to significant digits.
Answer: The mole fraction of sulfur hexafluoride is 0.221 and that of sulfur tetrafluoride is 0.779
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
For sulfur hexafluoride:Given mass of sulfur hexafluoride = 5.43 g
Molar mass of sulfur hexafluoride = 146.06 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of sulfur hexafluoride}=\frac{5.43g}{146.06g/mol}=0.0372mol[/tex]
For sulfur tetrafluoride:Given mass of sulfur tetrafluoride = 14.2 g
Molar mass of sulfur tetrafluoride = 108.07 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of sulfur tetrafluoride }=\frac{14.2g}{108.07g/mol}=0.1314mol[/tex]
Total moles of gas in the tank = [0.0372+ 0.1314] mol = 0.1686 mol
Mole fraction is defined as the moles of a component present in the total moles of a solution. It is given by the equation:
[tex]\chi_A=\frac{n_A}{n_A+n_B}[/tex] .....(2)
where n is the number of moles
Putting values in equation 2, we get:
[tex]\chi_{SF_6}=\frac{0.0372}{0.1686}=0.221[/tex]
[tex]\chi_{SF_4}=\frac{0.1314}{0.1686}=0.779[/tex]
Hence, the mole fraction of sulfur hexafluoride is 0.221 and that of sulfur tetrafluoride is 0.779
You pre-weigh a glass vial to hold your sample and find its mass to be 5.010 g. You add your sample to the vial and reweigh it on the same balance and find that the mass has increased to 6.130 g. What is the mass of the sample in grams
When we pre-weigh a glass vial to hold our sample and find its mass to be 5.010 g. Then we add our sample to the vial and reweigh it on the same balance and find that the mass has increased to 6.130 g. The mass of the sample in grams is 1.12 g.
What is mole concept?Avogadro's number is the number of units in one mole of any substance and equals to 6.02214076 × 10²³. The units can be electrons, atoms, ions, or molecules.
No. of moles is defined as a particular no. of particles that we can calculate with the help of Avogadro’s number.
Mass of a particular product is also find out by stoichiometry of a reaction as per the no. of mole given in the reaction.
Mass is generally can be represented by units like Kg, g etc.
Given,
weigh of glass vial = 5.010 g
weigh of glass vial with sample = 6.130 g
Therefore, When we pre-weigh a glass vial to hold our sample and find its mass to be 5.010 g. Then we add our sample to the vial and reweigh it on the same balance and find that the mass has increased to 6.130 g. The mass of the sample in grams is 1.12 g.
Learn more about mass, here:
https://brainly.com/question/19694949
#SPJ2
Which of the following is considered a standard unit of length in the United States?
O square inch
O acre
O cubic yard
O yard
Answer:
Yard . I hope this helped:))
Consider an atom that has an electron in an excited state. The electron falls to a lower energy level. What effect does that have on the electron?
A.The electron releases energy in the form of light.
B.The electron absorbs energy in the form of light.
C.The electron retains its energy without any change.
D.The electron transfers its energy to other electrons.
Answer:
c it does not change the energy state
Explanation:
What size volumetric flask would you use to create a 1.00M solution using 166.00 g of KI?
Answer:
A 1 liter volumetric flask should be used.
Explanation:
First we convert 166.00 g of KI into moles, using its molar mass:
Molar mass of KI = Molar mass of K + Molar mass of I = 166 g/mol
166.00 g ÷ 166 g/mol = 1 mol KIThen we calculate the required volume, using the definition of molarity:
Molarity = moles / litersLiters = moles / molarity
1 mol / 1.00 M = 1 LHow many atoms are in 7.0 g of Ne?
Answer:
2.11×10²³ atoms.
Explanation:
From the question given above, the following data were obtained:
Mass of Ne = 7 g
Number of atoms =?
Recall:
1 mole of Ne = 6.02×10²³ atoms
1 mole of Ne = 20 g
Thus,
20 g of Ne = 6.02×10²³ atoms
Finally, we shall determine the number of atoms in 7 g of Ne. This can be obtained as follow:
20 g of Ne = 6.02×10²³ atoms
Therefore,
7 g of Ne = (7 × 6.02×10²³) / 20
7 g of Ne = 2.11×10²³ atoms
Thus, 7 g of Ne contains 2.11×10²³ atoms.
Which is a general chemical equation for an exothermic, single-replacement reaction?
A.
AB + CD + energy → AD + CB
B.
AB + C → A + CB + energy
C.
AB + CD → AD + CB + energy
D.
AB + C + energy → A + CB
Answer:
c
Explanation:
it is because the chemical reaction will have the exposure to all the minerals with Microsoft word
Can someone help me answer this please
Answer:
A) 1.3 × 10⁻⁵ mol/L
Explanation:
Step 1: Write the balanced equation for the solution of AgCl
AgCl(s) ⇄ Ag⁺(aq) + Cl⁻(aq)
Step 2: Make an ICE Chart
AgCl(s) ⇄ Ag⁺(aq) + Cl⁻(aq)
I 0 0
C +S +S
E S S
If we replace the solubility (S) in the Ksp expression, we get,
Ksp = [Ag⁺] [Cl⁻] = S × S = S²
S = √Ksp = √1.8 × 10⁻¹⁰ = 1.3 × 10⁻⁵ mol/L
Select the net ionic equation for the reaction that occurs when magnesium sulfate and nickel(II) nitrate are mixed.
a. Ni2+(aq) + SO4^2- → NISO2 (s) + O2 (g).
b. Mg2+(aq) + 2NO3 (aq) → Mg(NO3)2(s).
c. Mg2+(aq) + NO3- → MgNO3 (s).
d. Mg2+(aq) + SO4^2- (aq) + Ni2+ (aq) + 2NO3- → Mg2+ (aq) + 2NO3 (aq) + NISO4 (s).
e. Ni2+(aq) + SO4^2- (aq) → NISO4 (s).
f. No reaction occurs.
Answer:
No reaction occurs.
Explanation:
The molecular reaction is as follows;
MgSO4(aq) + Ni(NO3)2(aq) ----> Mg(NO3)2(aq) + NiSO4(aq)
We can see from the reaction above that the both products of the reaction are soluble. Recall that a double replacement reaction often yields one insoluble product which separates as a precipitate.
This reaction does not occur since the two products that ought to be obtained are soluble in water.
Soda contains phosphoric acid (H3PO4). To determine the concentration of phosphoric acid in 50.0 mL of soda, the available phosphate ions are precipitated with excess silver nitrate as silver phosphate (418.58 g/mol). The dry Ag3PO4 is found to have a mass of 0.0576 g. What is the concentration of phosphoric acid in the soda?
Answer:
0.0270w/v% H3PO4 in the soda
Explanation:
All phosphates reacts producing Ag3PO4. To solve this question we must convert the mass of Ag3PO4 to moles. These moles = moles of H3PO4. We can find, thus, the mass of H3PO4 and the w/v% as follows:
Moles Ag3PO4 -Molar mass: 418.58g/mol-
0.0576g * (1mol / 418.58g) = 1.376x10⁻⁴ moles Ag3PO4 = moles H3PO4
Mass H3PO4 -Molar mass: 97.994g/mol-
1.376x10⁻⁴ moles Ag3PO4 = moles H3PO4 * (97.994g/mol) = 0.0135g H3PO4
w/v%:
0.0135g H3PO4 / 50.0mL * 100 =
0.0270w/v% H3PO4 in the sodaHow many milliliters of a 0.40%(w/v) solution of nalorphine must be injected to obtain a dose of 1.5 mg?
Answer:
0.375mL of solution of nalorphine must be injected
Explanation:
A solution of 0.40% (w/v) contains 0.40g of solute (In this case, nalorphine), in 100mL of solution. To obtain 1.5mg of nalorphine = 1.5x10⁻³g of nalorphine are needed:
1.5x10⁻³g * (100mL / 0.40g) =
0.375mL of solution of nalorphine must be injectedIf the Air Pressure on a mountain Is 0.3 atm what is this value mmHg? 1atm = 760mmHg = 101kPa
Answer:
IS IT MULTIPLE CHOICE
Explanation:
Equilibrium constants for gases can be expressed in terms of concentrations, Kc, or in terms of partial pressures, Kp. Which one of the following statements regarding Kc and Kp is correct?
a. Kc and Kp are equal when all stoichiometric coefficients in the balanced reaction equation equal one.
b. Kc and Kp are equal when the conditions are standard (P= 1 atm, T=298 K)
c. Kc and Kp are equal when the sum of the stoichiometric coefficients for the products equals the sum of the stoichiometric coefficients for the reactants.
d. Kc and Kp can never be equal.
e. Kc and Kp have the same values but different units.
Answer:
c. Kc and Kp are equal when the sum of the stoichiometric coefficients for the products equals the sum of the stoichiometric coefficients for the reactants.
Explanation:
Hello there!
In this case, according to the given information, it turns out firstly necessary for us to write the relationship between Kc and Kp in terms of the temperature and the change in the stoichiometric coefficients:
[tex]Kp=Kc(RT)^{\Delta \nu}[/tex]
Thus, we can see that the Kp=Kc just when Δυ=0, which is the sum of the coefficients of products minus that of reactants; and therefore, the correct answer will be c. Kc and Kp are equal when the sum of the stoichiometric coefficients for the products equals the sum of the stoichiometric coefficients for the reactants.
Regards!
Which of the following is true for the percentage yield of a reaction?
Answer:
It is always less than the theoretical yield.
How many moles are in 18.2 g of CO2?
41.4 moles
801 moles
0.414 moles
0 2.42 moles
Answer:
0.414 mole (3 sig. figs.)
Explanation:
Given grams, moles = mass/formula weight
moles in 18.2g CO₂(g) = 18.2g/44g/mole = 0.413636364 mole (calc. ans.)
≅ 0.414 mole (3 sig. figs.)
There are four different starting molecules that one might use to synthesize the illustrated alkyl halide as the major product using an electrophilic addition reaction. Please draw all four of them.
Answer:
Explanation:
An electrophilic addition reaction occurs when an electrophile attacks a substrate, with the end result being the inclusion of one or many comparatively straightforward molecules along with multiple bonds.
In the given question, the hydrogen bromide provides the electrophile while the bromide is the nucleophile. The mechanism proceeds with the attack of the electrophile on the carbon, followed by deprotonation. This process is continued with a formation of carbocation and the bromide(nucleophile) finally bonds to the carbocation to form a stable product.
The first diagram showcases the possible various starting molecules for the synthesis while the second diagram illustrates their mechanism.
an element E forms a hydride EH3, which contains 90% of E by mass. what is the relative atomic mass ?
Answer:
27 g/mol of E
Explanation:
Note that percentage by mass= mass of each element present. So, since there is 90% of E, there is 90g of E present. By implication, there are 10g of H corresponding to 10%H. Note that there is 100g of EH3
1 moles of E corresponds to 90 g of E
Mole ratio of E: H= 1:3
Thus
Number of moles of H = 10g/ 1g/ mol = 10 moles of H
Since E contains 1/3 the number of moles of H
Number of moles of E = 1/3 × 10 = 3.33 moles of E
Molar mass of E= mass of E/ number of moles of E
Since mass of E = 90 g
Molar mass of E = 90g/3.33 moles
Molar mass of E = 27 g/mol
When taking a measurement with a pH meter, keep the instrument in the ______________ until it is needed. Rinse the pH meter with ______________ and gently pat dry. Place the meter in the sample solution, and record the measurement when the pH __________
Answer:
Storage solution; deionized water; stabilizes.
Explanation:
The pH scale measures the concentration of hydrogen ions in acidic and alkaline solutions.
In chemistry, it literally means power of hydrogen ions and it is a measure of the molar concentration of hydrogen ions in a particular solution, thus specifying the acidity, neutrality or basicity of chemical solutions.
Mathematically, the pH of a solution is given by;
[tex] pH = -log_{10}(H^{+}) [/tex]
Hence, a solution with a pH of 7 is neutral. Also, a solution with a pH below 7 is acidic but basic (alkaline) if it's pH is above 7.
A pH meter can be defined as a scientific instrument or device designed and developed for the measurement of the hydrogen-ion concentration in water-based solutions, in order to determine their level of acidity or alkanility.
When using a pH meter to take a measurement, you should keep it in a storage solution until it is needed. Also, a deionized water should be used to rinse the pH meter and gently pat dry.
Furthermore, the pH meter should be placed in a given sample solution and a reading of the measurement taken when the pH of the solution stabilizes.
what would be the mass of 44.8 L of CO2 gas at STP?
show work if possible
Answer:
[tex]m=88.02g[/tex]
Explanation:
Hello there!
In this case, for this ideal gas law problem, it turns out necessary for us to remember that one mole of any gas is contained in 22.4 L at STP and therefore, we can use the following ratio to calculate the moles in 44.8 L of CO2:
[tex]\frac{1mol}{22.4L} =\frac{x}{44.8L}\\\\x= \frac{1mol*44.8L}{22.4L}=2mol[/tex]
Finally, since the molar mass of CO2 is 44.01 g/mol, we calculate the mass as follows:
[tex]m=2mol*\frac{44.01g}{1mol}\\\\m=88.02g[/tex]
Regards!
which effect of long-term environmental change is the driving force behind evolution?
Answer:
climate change
Explanation:
climate change is driving force of evolution because when the climate is changed the animal and human need to adapt to it's natural change.
Water is considered to be a diatomic molecule because it composed of two different atoms. True or false?
Answer:
false
Explanation:
False, water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.
Explanation:
The monoatomic molecule is composed of a single atom of an element.For example: Helium(He) , argon(Ar) etc.The diatomic molecule is composed of two atoms of the same or different elements.For example: hydrochloric acid (HCl), sodium chloride (NaCl) etc.The polyatomic molecule is composed of three or more than three atoms of the same or different elements.For example: water ([tex]H_2O[/tex]), sodium hydroxide(NaOH) etc.So, from this, we can conclude that water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.
Learn more about types of molecules here:
brainly.com/question/3213630?referrer=searchResults
brainly.com/question/4979095?referrer=searchResults
