An employer plans to pay bonus to each of his employees. Those earning Rs. 2000 or above are to be paid 10 percent of their salary and those earning less than 2000 are to be paid Rs. 200. The input record contains employee number, name and salary of an employee. The output should be employee name and their bonus. Write pseudo code algorithm to process the requirement.

Explanation:

In general, when a program runs in text-based environment like command line interface, the program is used for determining the order in which things happen.

As the program runs, the user will not have any choice and he or she can enter the required data.

If the user enters the data in required format then, he/she can get the result or output in desired format.

I'll pick up your question from here:

Define a function print_total_inches, with parameters num_feet and num_inches, that prints the total number of inches. Note: There are 12 inches in a foot.

Sample output with inputs: 5 8

Total inches: 68

Answer:

The program is as follows:

def print_total_inches(num_feet,num_inches):

     print("Total Inches: "+str(12 * num_feet + num_inches))

print_total_inches(5,8)

inches = int(input("Inches: "))

feet = int(input("Feet: "))

print_total_inches(feet,inches)

Explanation:

This line defines the function along with the two parameters

def print_total_inches(num_feet,num_inches):

This line calculates and prints the equivalent number of inches

     print("Total Inches: "+str(12 * num_feet + num_inches))

The main starts here:

This line tests with the original arguments from the question

print_total_inches(5,8)

The next two lines prompts user for input (inches and feet)

inches = int(input("Inches: "))

feet = int(input("Feet: "))

This line prints the equivalent number of inches depending on the user input

print_total_inches(feet,inches)

Answer:

Written in Python:

def print_total_inches(num_feet,num_inches):

    print("Total inches: "+str(12 * num_feet + num_inches))

feet = int(input())

inches = int(input())

print_total_inches(feet, inches)

Explanation:

Answer:

Los riesgos de las nuevas tecnologías se multiplican a medida que nos hacemos dependientes de ellas. También lo hacen a medida que sustituyen a otras formas de contacto social más cercanas

Los riesgos de las nuevas tecnologías son grandes desconocidos. El mal uso de las redes sociales y de Internet en los ordenadores y en el teléfono móvil, entre otros factores, supone un peligro real para todos los estratos de población, pero en especial para los más jóvenes. Pensemos, ¿realmente somos conscientes de los riesgos que suponen las nuevas tecnologías? ¿Sabemos cómo utilizarlas para no ponernos en riesgo?

Cabe destacar que las denominadas nuevas tecnologías de la información y de la comunicación (TICs) son un distintivo de la época actual y se han convertido en herramientas esenciales en las diferentes áreas de la vida. Esto es, para el área académica, laboral, social, de ocio…

En la mayoría de los ámbitos están presentes las TICS, pues incluyen las diferentes herramientas con las que nos manejamos hoy en día: servicios de contacto electrónico (e-mails, servicios de mensajería instantánea, chats), los teléfonos móviles, tablets y ordenadores, las plataformas online de difusión de contenidos, las redes sociales, entre otros..

Explanation:

Answer:

A) for 100 : < 1 times

b) for 750 : < 1 times

c) For 2000 = 1 time

D) for  10000 = 4 times

E) for  100000 = 7 times

Explanation:

Given data:

load factor = 75%

initial capacity = 1000

The number of times the enlarge method will be called for a unique number of entries  would be 2 times the initial capacity ( 1000 ) because the load factor = 75% = 0.75

A) for 100 : < 1 times

b) for 750 : < 1 times

C) For 2000

= initial capacity * 2  = 2000   ( 1 time )

D) for 10000

= 1000 * 2 *2 *2*2 = 16000 ( 4 times )

to make it 10000 we have to add another 2000 which will make the number of times = 4 times

E)for  100000

= 1000*2*2*2*2*2*2*2= 128000 ( 7 times )

unique entry of 100000 is contained in 7 times

Answer:

a)

void zero(double big_nums[]);  

b)

zero(big_nums)  

c)

int add1AndSum (int one_small[]);

d)

add1AndSum(one_small);

Explanation:

a)

void zero(double big_nums[]);  

in this statement:

zero is the name of the function

void is used as the function does not return a value.

The function zero takes an array parameter i.e. big_nums[]

big_nums is the name of the array

big_nums[] array has a data type double

b)

zero is the name of the function

In part a) function zero has a parameter which is the array big_nums. So in order to call this function an array has to be passed as a parameter to this function.

So in this statmenent zero(big_nums) the array big_nums is passed to the zero function. You can also declare a new  double type array with a different name in main() function and can pass this to the zero function as:

double array[ ] = { 20.6, 30.8, 5.1};

zero(array);

Look at the following program for the better understanding of part a) and b)

#include <iostream>   //for using input output functions

using namespace std;  //to access objects like cin cout

void zero (double big_nums[]);   // function prototype

int main() {  //start of main() function

double a[ ] = { 20.6, 30.8, 5.1};  // double type array a with elements

zero(a);    }   //calls zero function passing array a to the function

void zero(double big_nums[]){      // function zero with double type array big_nums as parameter and the function returns no value

   int i;    

   for(i=0;i<3;++i)     {

        cout<<big_nums[i];     }  }  //prints the elements of array

c)

add1AndSum is the name of the function

int is used as the function does not return an integer.

The function add1AndSum takes an integer array parameter i.e. one_small[]

one_small is the name of the array

one_small[] array has a data type int

d)

add1AndSum is the name of the function

In part c) function add1AndSum has a parameter which is the array one_small. So in order to call this function an array has to be passed as a parameter to this function.

So in this statement add1AndSum(one_small); the array one_small is passed to the add1AndSum function. You can also declare a new  int type array with a different name in main() function and can pass this to the add1AndSum function.

Answer:

Enable SSID broadcast

Explanation:

All of the following are extra precautions you can take to secure a wireless network except enable SSID broadcast. The correct option is B.

When people in the area try to join their wireless devices, the name of your network is listed in the list of available networks thanks to broadcasting the SSID.

You can stop SSID broadcasting if you don't want arbitrary wireless devices attempting to connect to your network.

Home networks don't need to have a visible SSID unless they have many access points that devices can switch between.

If your network just has a single router, disabling this function means giving up the ease of adding new home network customers in exchange for certain security gains.

Apart from enabling SSID broadcast, there are other security measures you may take to protect a wireless network.

Thus, the correct option is B.

For more details regarding SSID broadcast, visit:

https://brainly.com/question/13191413

#SPJ6

Answer:

500,000

Explanation:

A computer uses a programmable clock in square-wave mode. If a 500 MHz crystal is used, what should be the value of the holding register to achieve a clock resolution of (a) a millisecond (a clock tick once every millisecond)

1 millisecond = 1 million second = 1,000,000

For a 500 MHz crystal, Counter decrement = 2

Therefore value of the holding register to a clock resolution of 1,000,000 seconds :

1,000,000/2 = 500,000

Complete Question:

The first electric, general-purpose computer, ENIAC, was programmed by?

Group of answer choices.

A. Calculating algorithms on paper.

B. Entering code directly into the computer.

C. Flipping switches by hand.

D. Using MS-DOS as the operating system.

Answer:

C. Flipping switches by hand.

Explanation:

The first electric, general-purpose computer, ENIAC, was programmed by flipping switches by hand.

ENIAC is an acronym for Electronic Numerical Integrator and Computer, it was developed in 1945 by John Mauchly and J. Presber Eckert. ENIAC was used for solving numerical problems or calculation-related tasks by the process of reprogramming.

In order to give the ENIAC a series of machine instructions to follow in the execution of a task, the programmers had to undergo the cumbersome procedure of connecting, removing, reconnecting cables and flipping switches by hand because data couldn't be stored in memory.

Answer:

a. The DLP system flagged the message.

Explanation:

Data Leaked Prevention System is the software that detects potential data breaches that may result in the future. It detects the possible data breach, then monitors it and immediately blocks any sensitive data. DLP system is widely used by businesses. The human resource team received a message because sensitive information about the business benefits and tax is shared with a candidate.

Answer:

Such languages are used to create computer code or program code, the set of instructions forming a computer program which is executed by the computer. This source code is translated into machine code by a compiler or interpreter, so that the computer can execute it to perform its tasks.

Answer:

Writing code,” “coding,” and “programming” are basically interchangeable terms. Broadly speaking, knowing how to write code is the process of creating instructions that tell a computer what to do, and how to do it. Codes are written in various languages, such as javascript, C#, Python, and much more.

hlo samradhiki can we chat in comment section

#include <iostream>

using namespace std;

class CameraPhone:Phone{

int imageSize,memorySize;

public:

CameraPhone(int image_size,int memory_size):imageSize(image_size),memorySize(memory_size){}

int numPictures(){

return memorySize-imageSize;

}

}

int main(){}

Here is the code for the derived class, CameraPhone:

class Phone:

class CameraPhone(Phone):

 def numPictures(self):

This code defines a derived class, CameraPhone, that inherits from the Phone class. The CameraPhone class has two additional data members: imageSize and memorySize. The constructor for the CameraPhone class takes two additional parameters corresponding to these data members. The numPictures() function returns the number of pictures that the camera's memory can hold.

Here is an example of how to use the CameraPhone class:

phone = CameraPhone("Apple", "iPhone 13 Pro", 1000, 10, 100)

print(phone.numPictures())

# Output: 10

This code will print the number of pictures that the camera's memory can hold, which is 10 in this case.

Find out more on derived class here: https://brainly.com/question/31942927

#SPJ2

Answer:

The generator function using yield from:

def scale(s, k):

   yield from map(lambda x: x * k, s)

Another way to implement generator function that works same as above using only yield:

def scale(s, k):

  for i in s:

       yield i * k

Explanation:

The complete program is:

def scale(s, k):

   """Yield elements of the iterable s scaled by a number k.  

   >>> s = scale([1, 5, 2], 5)

   >>> type(s)

   <class 'generator'>

   >>> list(s)

   [5, 25, 10]  

   >>> m = scale(naturals(), 2)

   >>> [next(m) for _ in range(5)]

   [2, 4, 6, 8, 10]

   """

   yield from map(lambda x: x * k, s)

If you want to see the working of the above generator function scale() as per mentioned in the above comments, use the following statements :

s = scale([1, 5, 2], 5)  

print(type(s))  

#The above print statement outputs:

#<class 'generator'>

print(list(s))

#The above print statement outputs a list s with following items:

#[5, 25, 10]                                                                                                                    

The function def scale(s, k): is

def scale(s, k):

   yield from map(lambda x: x * k, s)    

This function takes two parameters i.e. s and k and this function yields elements of the given iterable s, scaled by k.

In this statement:    yield from map(lambda x: x * k, s)    

yield from is used which allows to refactor a generator in a simple way by splitting up generator into multiple generators.

The yield from is used inside the body of a generator function.

The lambda function is a function that has any number of arguments but can only have one expression. This expression is evaluated to an iterable from which an iterator will be extracted. This iterator yields and receives values to or from the caller of the generator. Here the expression is x: x * k and iterable is s. This expression multiplies each item to k.

map() method applies the defined function for each time in an iterable.

The generator function can also be defined as:

def scale(s, k):

  for i in s:

       yield i * k

For the above example

s = scale([1, 5, 2], 5)  

def scale(s,k): works as follows:

s = [1, 5, 2]

k = 5

for loop iterates for each item i in iterable s and yields i*k

i*k multiplies each element i.e 1,5 and 2 to k=5 and returns a list

At first iteration, for example, i*k = 1 * 5 = 5, next iteration i*k = 5*5 = 25 and last iteration i*k = 2*5 = 10. So the output. So

s = scale([1, 5, 2], 5)  In this statement now s contains 5, 25 and 10

print(list(s))  prints the values of s in a list as: [5, 25, 10] So output is:

[5, 25, 10]

Answer:

The correct answer will be "Man-in-the-browser".

Explanation:

Answer:

The output is "a pineapple is larger than a blueberry ".

Explanation:

In the given  C language code Enum, typedef, and two methods "printfruit and compareFruit" is declared, that can be defined as follows:

Answer:

The last octet

Explanation:

Here in the question, given the sub net mask, we want to know which octet of the subnet mask will tell the router the corresponding host ID.

The correct answer to this is the last octet. It is the last octet that will tell the router the corresponding host ID

Answer:

num_owls_zooA = 1

num_owls_zooB = 2

num_owls_zooC = 4

num_zoos = 3

avg_owls = 0.0

avg_owls = (num_owls_zooA + num_owls_zooB + num_owls_zooC) / num_zoos

print("Average owls per zoo: " + str(int(avg_owls)))

Explanation:

Initialize the num_owls_zooA, num_owls_zooB, num_owls_zooC as 1, 2, 4 respectively

Initialize the num_zoos as 3 and avg_owls as 0

Calculate the avg_owls, sum num_owls_zooA, num_owls_zooB, num_owls_zooC and divide the result by num_zoos

Print the avg_owls as an integer (Type cast the avg_owls to integer, int(avg_owls))

Why MUST you request your DSO signed I-20 ship as soon as it is ready and who is responsible to request the I-20?

a. It is required you have an endorsed/signed I-20 when Customs and Border Patrol or police ask for it

b. We only keep an unsigned digital copy and cannot sign an I-20 after the fact

c. It is against U.S. regulations to send digital (signed or not) DS-2019s and must treat I-20s the same

d. You will need all signed original I-20s to make copies to apply for OPT, STEM and H-1B in the future, so get them now!

e. It is the student’s choice to request each term, however, we cannot go back retroactively to provide past copies

f. We can only provide a signed copy of current I-20 and if changes occur from previous semesters that information will not show

g. The original endorsed I-20 signed by a DSO will be destroyed after 30 days of issuance if not picked up, and it cannot be replicated

h. The cost to have I-20 shipped may go up at any time

i. All the above

Answer:

i. All the above

Explanation:

DSO means designated school officials and they have to do with Student and Exchange Visitor Program (SEVP)-certified schools where students have to get a Form I-20, “Certificate of Eligibility for Nonimmigrant Student Status which provides information about the student's F or M status.

What a student must request for from his DSO signed I-20 ship are all the above options.

Answer:

Here is the Python function readList:

def readList(filename):  #function definition of readList that takes a filename as a parameter and returns a list of integers in the file

   list = []  # declares an empty list

   with open(filename, 'r') as infile:  # opens the file in read mode by an object infile

       lines = infile.readlines()  # returns a list with each line in file as a list item

       for line in lines:   #loops through the list of each line

           i = line[:-1]  # removes new line break which is the last character of the list of line

           list.append(i)  # add each list item i.e. integers in the list

       return list  #returns the list of integers

#in order to check the working of the above function use the following function call and print statement to print the result on output screen

print(readList("file.txt")) #calls readList function by passing a file name to it

Explanation:

The program is well explained in the comments mentioned with each line of the code.

The program declares an empty list.

Then it opens the input file in read mode using the object infile.

Next it uses readLines method which returns a list with each line of the file as a list item.

Next the for loop iterates through each item of the file which is basically integer one per line

It adds each item of list i.e. each integers in a line to a list using append() method.

Then the function returns the list which is the list of integers in the file.

The program along with it output is attached. The file "file.txt" contains integers 1 to 8 one per line.

Answer:

The program written in Java is as follows

import java.util.Scanner;

public class mutilate {

public static void main(String [] args) {

Scanner input = new Scanner(System.in);

int n;

System.out.print("Array Length: ");

n = input.nextInt();

while(n<1 || n > 103)  {

    System.out.print("Array Length: ");

n = input.nextInt();

}

int a []= new int [n];

int b []= new int [n];

System.out.print("Enter Elements of the Array: ");

for(int i =0;i<n;i++)  {

 a[i] = input.nextInt();

}

System.out.print("Output: ");

for(int i =0;i<n;i++)  {

 if(i == 0)   {

     b[i] = 0+a[i]+a[i+1];

 }

 else if(i == n-1)   {

     b[i] = a[i - 1]+a[i]+0;

 }

 else   {

 b[i] = a[i - 1]+a[i]+a[i+1];    

 }

 System.out.print(b[i]+" ");

}

}

}

Explanation:

This line allows the program accepts user input

Scanner input = new Scanner(System.in);

This line declares integer n

int n;

The next two line prompts user for length of the array and also accepts input

System.out.print("Array Length: ");

n = input.nextInt();

The following while iteration ensures that the user input is between 1 and 103

while(n<1 || n > 103)  {

    System.out.print("Array Length: ");

n = input.nextInt();

}

The next two lines declares array a and b

int a []= new int [n];

int b []= new int [n];

The next for iteration allows user enter values for array a

System.out.print("Enter Elements of the Array: ");

for(int i =0;i<n;i++)  {

 a[i] = input.nextInt();

}

The next for iteration calculates and prints the values for array b based on the instruction in the question

System.out.print("Output: ");

for(int i =0;i<n;i++)  {

 if(i == 0)   {

     b[i] = 0+a[i]+a[i+1];

 }

 else if(i == n-1)   {

     b[i] = a[i - 1]+a[i]+0;

 }

 else   {

 b[i] = a[i - 1]+a[i]+a[i+1];    

 }

 System.out.print(b[i]+" ");

}

Answer:

mouse printer CPU touch screen

Explanation:

on a tablet computer hope this helps you :)

Answer:

See the attached document for answer.

Explanation:

See the attached document for the explanation.  

Answer:

b. obA.c 5;

d. ClassA.b=23;

f. ClassA.d = 99;

Explanation:

Java is a programming language for object oriented programs. It is high level programming language developed by Sun Microsystems. Java is used to create applications that can run on single computer. Static variable act as global variable in Java and can be shared among all objects. The non static variable is specific to instance object in which it is created.

Answer:

def group_by_nondecreasing( *args ) :

     num_list = [arg for arg in args]

     sorted_numlist = sorted( num_list )

     list_stream = [ sorted_numlist, sorted_numlist, sorted_numlist ]

     return list_stream

Explanation:

This python function has the ability to accept multiple and varying amount of arguments. the list comprehension shorten the logical for statement to generate a list of numbers, sorts the list in ascending order by default and duplicates the list in another list.

The quick key to highlighting a column is the Ctrl + Shift + down arrow. Thus, option (b) is correct.

The term column refers to how data is organized vertically from top to bottom. Columns are groups of cells that are arranged vertically and run from top to bottom. A column is a group of cells in a table that are vertically aligned. The column is the used in the excel worksheet.

The quick key for highlighting a column is Ctrl + Shift + down arrow. To select downward, press Ctrl-Shift-Down Arrow. To pick anything, use Ctrl-Shift-Right Arrow, then Ctrl-Shift-Down Arrow. In the Move/Highlight Cells, the was employed. The majority of the time, the excel worksheet was used.

As a result, the quick key to highlighting a column is the Ctrl + Shift + down arrow. Therefore, option (b) is correct.

Learn more about the column, here:

https://brainly.com/question/3642260

#SPJ6

Answer:

its (B) ctrl+shift+down arrow

hope this helps <3

Explanation:

Answer:

Here is the function PrintSongsShorterThan() which prints all the songs from the album shorter than the value of the parameter songDuration.

void Album::PrintSongsShorterThan(int songDuration) const {   //function that takes the songDuration as parameter

unsigned int i;  

Song currSong;    //object of Song

cout << "Songs shorter than " << songDuration << " seconds:" << endl;  

for(int i=0; i<albumSongs.size(); i++){    

currSong = albumSongs.at(i);    

if(currSong.GetDuration()<songDuration){    //checks if the song duration of the song from album is less than the value of songDuration

currSong.PrintSong();     } } }  //calls PrintSong method to print all the songs with less than the songDuration

Explanation:  

I will explain the working of the for loop in the above function.

The loop has a variable i that is initialized to 0. The loop continues to execute until the value of i exceeds the albumSongs vector size. The albumSongs is a Song type vector and vector works just like a dynamic array to store sequences.

At each iteration the for loop checks if the value of i is less than the size of albumSongs. If it is true then the statement inside the loop body execute. The at() is a vector function that is used to return a reference to the element at i-th position in the albumSongs.  

So the album song at the i-th index of albumSongs is assigned to the currSong. This currSong works as an instance. Next the if condition checks if that album song's duration is less than the specified value of songDuration. Here the method GetDuration() is used to return the value of duration of the song. If this condition evaluates to true then the printSong method is called using currSong object. The printSong() method has a statement cout << name << " - " << duration << endl; which prints/displays the name of the song with its duration.

If you see the main() function statement:

musicAlbum.PrintSongsShorterThan(210);  

The musicAlbum is the Album object to access the PrintSongsShorterThan(210) The value passed to this method is 210 which means this is the value of the songDuration.

As we know that the parameter of PrintSongsShorterThan method is songDuration. So the duration of each song in albumSongs vector is checked by this function and if the song duration is less than 210 then the name of the song along with its duration is displayed on the output screen.

For example if the album name is Anonymous and the songs name along with their duration are:

ABC 400  

XYZ 123  

CDE 300  

GHI 200  

KLM 100  

Then the above program displays the following output when the user types "quit" after entering the above information.

Anonymous                                                              

Songs shorter than 210 seconds:                                                                         XYZ - 123                                                                                                              

GHI - 200                                                                                                              

KLM - 100  

Notice that the song name ABC and CDE are not displayed because they exceed the songDuration i.e. 210.

Answer:

An Operating System is pivotal in teaching and learning because:

1. It enables computer users to communicate with the hardware.

2. To run any computer programme successfully, the Operating System is basic.

3. It provides a smooth interface for teachers to use video conferencing or other conferencing systems in teaching their students.

4. The OS enables the launching of other learning packages on a computer system.

5. Students can install learning apps on their systems with the help of the OS.

Explanation:

An Operating System is a software which brings about easy communication with the hardware and enablea other programs to run on the computer easily. It provides basic functionality in systems were they are installed.

Answer:

The answer to this question can be defined as follows:

In option A: The answer is "13020".

In option B: The answer is "468 Segments".

Explanation:

Given:

The value of round-trip delay= 60 m-second

The value of Bandwidth= 1Gbps

The value of Segment size = 576 octets

window size =?

Formula:

[tex]\text{Window size =} \frac{(\text{Bandwidth} \times \text{round} - \text{trip time})}{(\text{segment size window })}[/tex]

                     [tex]=\frac{10^9 \times 0.06}{576 \times 8}\\\\=\frac{10^9 \times6}{576 \times 8\times 100}\\\\=\frac{10^7 \times 1}{96 \times 8}\\\\=\frac{10^7 \times 1}{768}\\\\=13020.83[/tex]

So, the value of the segments is =13020.833 or equal to 13020

Calculating segments in the size of 16 k-bytes:

[tex]\text{Window size} = \frac{10^9 \times 0.06}{16,000 \times 8}[/tex]

                    [tex]= \frac{10^9 \times 0.06}{16,000 \times 8}\\\\ = \frac{10^9 \times 6}{16,000 \times 8 \times 100}\\\\ = \frac{10^4 \times 3}{16 \times 4}\\\\ = \frac{30000}{64 }\\\\=468.75[/tex]

The size of 16 k-bytes segments is 468.75 which is equal to 468.

Answer:

a. Table range

Explanation:

Excel is used for maintaining the data of the company. It contains various formulas, features like pivot table, macros, sort & filter group so the firm could able to present its data in an effective and efficient way

Here the sort button is used to ascending or descending the table based on the name, values, etc

So in the given situation, the first option is correct

Answer:

Datasheet, aecending, home

Explanation:

Answer:

quality of highest giving page hash no adds

Answer:

My answer to the question is $350.

The middle numbers are $300&$400.

300+400=700/2=350.

Answer:

$350

Explanation: