Answer:
Replace /* Your solution goes here */
with the following:
courseStudent.SetName("Smith");
courseStudent.SetAge(20);
courseStudent.SetID(9999);
courseStudent.PrintAll();
cout <<courseStudent.GetID();
Explanation:
From the given code segment, we have the following methods defined under the StudentData class;
SetName -> It receives name from the main
SetAge -> It receives age from the main
SetID --> It receives ID from the main and passes it to GetID method
printID --> Prints all the required output.
So, we have:
Pass name to setName
courseStudent.SetName("Smith");
Pass age to setAge
courseStudent.SetAge(20);
Pass ID to setID
courseStudent.SetID(9999);
Print all necessary outputs
courseStudent.PrintAll();
Manually print the student ID
cout <<courseStudent.GetID();
Select the correct statement(s) regarding 4B5B encoding.
a. 4B5B is used to map four codeword bits into a five bit data word
b. 4B5B information bit rate is 80% of the total (information plus overhead) bit rate
c. 4B5B information bit rate is 20% of the total (information plus overhead) bit rate
d. all statements are correct
Answer:
b. 4B5B information bit rate is 80% of the total information plus overhead bit rate.
Explanation:
4B5B bit rate encoding means there is 80% of the bit rate which included all the information plus the overheads. There is 20% of lack in bit rate due to encoding code words which converts data into smaller bits.
what is the characteristics of computer?dicuss any 5 of them
Answer:
speed
accuracy
diligence
versatility
reliabiility
memory
speed: a computer works with more higher speed compared to humans when performing mathematical calculations
accuracy: computer perform calculations with 100% accuracy
dilligence:a computer can perform calculations with the same consistentcy and accuracy
versatility:refers to the capability of a computer to perform different kind of works with same accuracy and efficiencies
reliability
Answer:
speed
accuracy
diligent
versatile
storage and communication
A student registers for a course in a university. Courses may have limited enrollment i.e a student must
enroll atmost 9 credit hours, the registration process must include checks that places are available. Assume
that the student accesses an electronic course catalog to find out about available courses. Which design
model should be followed by this secenario? Draw any two UML diagrams.
Answer:
Follows are the complete question to the given question:
Explanation:
The UML scheme is a UML-based diagram intended to depict the system visually, together with its key actors, roles, activities, objects, and classes, to gather information the about system, change that, or maintain it.
Every complex process is better understood via sketches or pictures. These diagrams have a higher understanding effect. By glancing about, we notice that diagrams are not a new idea but are widely used in various business types. To enhance understanding of the system, we prepare UML diagrams. There is not enough of a single diagram to represent all aspects of the system. You can also create customized diagrams to satisfy your needs. Iterative and incremental diagrams are usually done.
There are two broad diagram categories and that they are broken into subclasses again:
Diagram structureDiagrams of behaviorPlease find the graph file of the question in the attachment.
Write a main function that declares an array of 100 ints. Fill the array with random values between 1 and 100.Calculate the average of the values in the array. Output the average.
Answer:
#include <stdio.h>
int main()
{
int avg = 0;
int sum =0;
int x=0;
/* Array- declaration – length 4*/
int num[4];
/* We are using a for loop to traverse through the array
* while storing the entered values in the array
*/
for (x=0; x<4;x++)
{
printf("Enter number %d \n", (x+1));
scanf("%d", &num[x]);
}
for (x=0; x<4;x++)
{
sum = sum+num[x];
}
avg = sum/4;
printf("Average of entered number is: %d", avg);
return 0;
}
We have removed
A
balls from a box that contained
N
balls and then put
B
new balls into that box. How many balls does the box contain now?
Constraints
All values in input are integers.
Input
Input is given from Standard Input in the following format: n a b
Output
Print the answer as an integer.
There were [tex]N[/tex] balls but we took [tex]A[/tex] balls out, so there are now [tex]N-A[/tex] balls. We add [tex]B[/tex] balls and now we have [tex]N-A+B[/tex] balls.
The program that computes this (I will use python as language has not been specified is the following):
n, a, b = int(input()), int(input()), int(input())
print(f"There are {n-a+b} balls in the box")
# Hope this helps
Draw a Card. Write a program to simulate drawing a card. Your program will randomly select one card from a deck of 52 playing cards. Your program should display the rank (Ace, 2, 3, 4, 5, 6, 7, 8, 9, 10, Jack, Queen, King) and suit (Clubs, Diamonds, Hearts, Spades) of the card. Here is a sample run of the program: in The card you picked is Jack of Heart The program should use at a minimum: sequence, selection, arrays, and random numbers.
Answer:
Explanation:
The following code is written in Java. It is a function that creates a Random object to generate random values, then uses those values to choose a random rank and suit using switch statements. It then saves the rank and suit into a String variable in the correct format and finally prints the card that was picked to the screen. The function was called 4 times in the main method and the output can be seen in the attached image below.
public static void randomCardGenerator() {
Random rand = new Random();
int rank = rand.nextInt(14)+1;
int suit = rand.nextInt(4)+1;
String chosenCard = "";
switch (rank) {
case 1: chosenCard += "Ace"; break;
case 2: chosenCard += "1"; break;
case 3: chosenCard += "2"; break;
case 4: chosenCard += "3"; break;
case 5: chosenCard += "4"; break;
case 6: chosenCard += "5"; break;
case 7: chosenCard += "6"; break;
case 8: chosenCard += "7"; break;
case 9: chosenCard += "8"; break;
case 10: chosenCard += "9"; break;
case 11: chosenCard += "10"; break;
case 12: chosenCard += "Jack"; break;
case 13: chosenCard += "Queen"; break;
case 14: chosenCard += "Kind"; break;
default: System.out.println("Wrong Value");
}
chosenCard += " of ";
switch (suit) {
case 1: chosenCard += "Clubs"; break;
case 2: chosenCard += "Diamonds"; break;
case 3: chosenCard += "Hearts"; break;
case 4: chosenCard += "Spades"; break;
default: System.out.println("Invalid Suit");
}
System.out.println(chosenCard);
}
Indicate whether the following actions are the actions of a person who will be a victim, or will not be a victim, of phishing attacks.
Replying to an e-mail requesting your user ID and password Phishing victim Not a phishing victim
Answer:
Phishing Victim
Explanation:
Replying to this email could make you a victim of a phishing scam. Phishing attacks are common challenges on security that internet users are faced with. It could lead to others getting hold of sensitive information like your password or bank details. email is one way the hackers used to get this information. replying to such an email could lead one to an unsecure website where information could be extracted
Write a program that uses a stack to test input strings to determine whether they are palindromes. A palindrome is a sequence of characters that reads the same as the sequence in reverse; for example, noon.
Answer:
Here the code is given as follows,
Explanation:
def isPalindrome(x):
stack = []
#for strings with even length
if len(x)%2==0:
for i in range(0,len(x)):
if i<int(len(x)/2):
stack.append(x[i])
elif stack.pop()!=x[i]:
return False
if len(stack)>0:
return false
return True
#for strings with odd length
else:
for i in range(0,len(x)):
if i==int(len(x)/2):
continue
elif i<int(len(x)/2):
stack.append(x[i])
elif stack.pop()!=x[i]:
return False
if len(stack)>0:
return false
return True
def main():
while True:
string = input("Enter a string or Return to quit: ")
if string == "":
break
elif isPalindrome(string):
print("It's a palindrome")
else:
print("It's not a palindrome")
if __name__ == '__main__':
main()
Transformative Software develops apps that help disabled people to complete everyday tasks. Its software projects are divided into phases in which progress takes place in one direction. The planning, delivery dates, and implementation of the software under development are emphasized. Which software development methodology is the company most likely using:_________.
Answer: Cascading
Explanation:
The software development methodology that the company is most likely using is Cascading.
Cascading model is a sequential design process, that is used in software development, whereby progress flows downward from the conception phase, initiation phase, till it gets to the maintenance phase.
describe the evolution of computers.
Answer:
First remove ur mask then am to give you the evolutions
3. Circular, array-backed queue In the following class, which you are to complete, the backing array will be created and populated with Nones in the __init__ method, and the head and tail indexes set to sentinel values (you shouldn't need to modify __init__). Enqueuing and Dequeuing items will take place at the tail and head, with tail and head tracking the position of the most recently enqueued item and that of the next item to dequeue, respectively. To simplify testing, your implementation should make sure that when dequeuing an item its slot in the array is reset to None, and when the queue is emptied its head and tail attributes should be set to -1.
Answer:
#Implementation of Queue class
class Queue
#Implementation of _init_
def _init_(self, limit=10):
#calculate the self.data
self.data = [None] * limit
self.head = -1
self.tail = -1
#Implementation of enqueue function
def enqueue(self, val):
#check self.head - self.tail is equal to 1
if self.head - self.tail == 1:
raise NotImplementedError
#check len(self.data) - 1 is equal to elf.tail
if len(self.data) - 1 == self.tail and self.head == 0:
raise NotImplementedError
#check self.head is equal to -1
if self.head == -1 and self.tail == -1:
self.data[0] = val
self.head = 0
self.tail = 0
else:
#check len(self.data) - 1 is equal to self.tail
if len(self.data) - 1 == self.tail and self.head != 0:
self.tail = -1
self.data[self.tail + 1] = val
#increment the self.tail value
self.tail = self.tail + 1
#Implementation of dequeue method
def dequeue(self):
#check self.head is equal to self.tail
if self.head == self.tail:
temp = self.head
self.head = -1
self.tail = -1
return self.data[temp]
#check self.head is equal to -1
if self.head == -1 and self.tail == -1:
#raise NotImplementedError
raise NotImplementedError
#check self.head is not equal to len(self.data)
if self.head != len(self.data):
result = self.data[self.head]
self.data[self.head] = None
self.head = self.head + 1
else:
# resetting head value
self.head = 0
result = self.data[self.head]
self.data[self.head] = None
self.head = self.head + 1
return result
#Implementation of resize method
def resize(self, newsize):
#check len(self.data) is less than newsize
assert (len(self.data) < newsize)
newdata = [None] * newsize
head = self.head
current = self.data[head]
countValue = 0
#Iterate the loop
while current != None:
newdata[countValue] = current
countValue += 1
#check countValue is not equal to 0
if countValue != 0 and head == self.tail:
break
#check head is not equal to
#len(self.data) - 1
if head != len(self.data) - 1:
head = head + 1
current = self.data[head]
else:
head = 0
current = self.data[head]
self.data = newdata
self.head = 0
self.tail = countValue - 1
#Implementation of empty method
def empty(self):
#check self.head is equal to -1
# and self.tail is equal to -1
if self.head == -1 and self.tail == -1:
return True
return False
#Implementation of _bool_() method
def _bool_(self):
return not self.empty()
#Implementation of _str_() method
def _str_(self):
if not (self):
return ''
return ', '.join(str(x) for x in self)
#Implementation of _repr_ method
def _repr_(self):
return str(self)
#Implementation of _iter_ method
def _iter_(self):
head = self.head
current = self.data[head]
countValue = 0
#Iterate the loop
while current != None:
yield current
countValue += 1
#check countValue is not equal to zero
#check head is equal to self.tail
if countValue != 0 and head == self.tail:
break
#check head is not equal to len(self.data) - 1
if head != len(self.data) - 1:
head = head + 1
current = self.data[head]
else:
head = 0
current = self.data[head
Explanation:-
Output:
shooting phases in film and video editing
Answer:
Filmmaking involves a number of complex and discrete stages including an initial story, idea, or commission, through screenwriting, casting, shooting, sound recording and pre-production, editing, and screening the finished product before an audience that may result in a film release and an exhibition.
From which panel can you insert Header and Footer in MS Word?
Answer:
Insert tap is the answer
the answer is ..
insert tab
Explain the following terms.
a) Explain Final keyword with example. b) Define Static and Instance variables
Answer:
A.
the final keyword is used to denote constants. It can be used with variables, methods, and classes. Once any entity (variable, method or class) is declared final , it can be assigned only once.
B.
Static variables are declared in the same place as instance variables, but with the keyword 'static' before the data type. While instance variables hold values that are associated with an individual object, static variables' values are associated with the class as a whole.
Your network has four Hyper-V hosts, which are running three domain controllers and about 10 member servers. Three of the member servers named HR1, HR2, and HR3 are running on a Windows Server 2012 R2 Hyper-V host; the others are running on Windows Server 2016 Hyper-V hosts. All VMs are running Windows Server 2016. You are currently running an enterprise human resources application on the HR1, HR2, and HR3 servers. You are considering upgrading this application to a new version that was recently released. Before you proceed with the upgrade, you set up a test environment consisting of a Windows Server 2016 Hyper-V host and three VMs. You haven't been using checkpoints on any of your VMs, but you want to start doing so as an extra form of disaster recovery in the event of VM corruption or errors introduced by updates. On your test environment, you want to use checkpoints while you are testing the new application. What type of checkpoints should you use throughout your live network and test network? Explain.
Answer:
Explanation:
Create a variable in php to store your university information and parse using jQuery Ajax and print your name. The variable must contain information about name, roll no, department and CGPA.
AnswLab giya j ty dy dio:
Explanation:
The correct order to follow for a technology awareness strategy is ____________________. Group of answer choices
Answer:
a. Determine your needs
b. make the Assessments of the resources available to you,
c. do a ranking of the resources in order of their usefulness to you,
d. create or allow the time to make use of the resources.
Explanation:
technology strategy is a concept that gives the important elements of a department and how these elements can interact with each other in order to get the continuous value.
The correct order is to first determine what your needs are, then you carry out an assessment of all the resources that you have at your disposal, then you rank these resources from the most useful to the least and the last is for you to create the time that you would have to use these resources.
Write a recursive function that calculates the sum 11 22 33 ... nn, given an integer value of nin between 1 and 9. You can write a separate power function in this process and call that power function as needed:
Answer:
The function in Python is as follows:
def sumDig(n):
if n == 1:
return 11
else:
return n*11 + sumDig(n - 1)
Explanation:
This defines the function
def sumDig(n):
This represents the base case (where n = 1)
if n == 1:
The function returns 11, when it gets to the base case
return 11
For every other value of n (n > 1)
else:
This calculates the required sum recursively
return n*11 + sumDig(n - 1)
9. Which of the following prefixes which relate to bytes are arranged from the smallest to the largest? a) mega, giga, tera, kilo b) meqa tera, giga, kilo c) kilo, mega, giga, tera d) kilo, giga, mega, tera
Answer:
Explanation:
C
kilo = 1000
mega = 1,000,000
giga = 1 billion = 1 000 000 000
tera = 1 trillion = 1 000 000 000 000
Code an operation class called ArrayComputing that will ask user to enter a serials of integers with a loop until -99 is entered and after the input it will keep and display the greatest, the least, the sum and the average of the data entries (-99 is not counted as the data). And code a driver class called ArrayComputingApp to run and test the ArrayComputing class, separately.
Must use required/meaningful names for fields, variables, methods and classes.
Must use separate methods to perform each of specified tasks as described.
Must document each of your source code
Answer:
Explanation:
The following is written in Java and creates the ArrayComputing class. It uses the constructor to create the infinite loop that only breaks when the user enters a -99. After every input number it goes adding the correct values to the variables. Once it is done the user can call any of the getter methods to get the variable values as well as calculate the average.
import java.util.Scanner;
class ArrayComputingApp {
public static void main(String[] args) {
ArrayComputing arrayComputing = new ArrayComputing();
System.out.println("Average: " + arrayComputing.getAverage());
System.out.println("Greatest: " + arrayComputing.getGreatest());
System.out.println("Least: " + arrayComputing.getLeast());
System.out.println("Sum: " + arrayComputing.getSum());
}
}
class ArrayComputing {
int greatest, least, sum, average;
int count = 0;
Scanner in = new Scanner(System.in);
public ArrayComputing() {
while (true) {
System.out.println("Enter a number or -99 to exit: ");
int num = in.nextInt();
if (num == -99) {
break;
}
if (num > this.greatest) {
this.greatest = num;
}
if (this.count == 0) {
this.least = num;
} else {
if (num < this.least) {
this.least = num;
}
}
this.sum += num;
this.count += 1;
}
}
public int getAverage() {
this.average = sum / count;
return this.average;
}
public int getGreatest() {
return greatest;
}
public int getLeast() {
return least;
}
public int getSum() {
return sum;
}
}
Fred is a 29 year old golfer, who has been playing for 4 years. He is a 12 handicap. He is considering the Srixon ZX5 or the Mavrik Pro. Talk through major considerations and provide a recommendation that would be well suited for him. Include explanations about forged vs cast features, the look of the club, and overall feel.
Answer:
oh nice yes good fine I like it
Given main(), complete the Car class (in file Car.java) with methods to set and get the purchase price of a car (setPurchasePrice(), getPurchasePrice()), and to output the car's information (printInfo()).
Ex: If the input is:
2011
18000
2018
where 2011 is the car's model year, 18000 is the purchase price, and 2018 is the current year, the output is:
Car's information:
Model year: 2011
Purchase price: 18000
Current value: 5770
Note: printInfo() should use three spaces for indentation.
Answer and Explanation:
public class Main {
int Carmodel;
int Purchaseprice;
int Currentyear;
Public void setPurchasePrice(int Purchaseprice){
this.Purchaseprice=Purchaseprice;
}
Public void getPurchasePrice(){
return Purchaseprice;
}
static void printInfo(int Carmodel int Currentyear ){
this.Carmodel=Carmodel;
this.Currentyear=Currentyear;
System.out.println(getPurchasePrice() Carmodel Currentyear);
}
}
The above java program defines a class that has three methods, a get method that returns purchase price of the object, a set method that sets purchase price of the object, and a print method that print out the information about the car object(model, year, price). The print method also takes arguments and assigns values of the arguments/parameters to the object, then prints all.
You've arrived on site to a WAN installation where you will be performing maintenance operations. You have been told the WAN protocol in use allows multiple Layer 3 protocols and uses routers that use labels in the frame headers to make routing decisions. What WAN technology is in use
Answer:
The answer is "MPLS".
Explanation:
The MPLS stands for Multiprotocol Label Switching. This packet switching method facilitates the generation of easier personal backbones using a less physical channel, which sends information from one source to its destination with labels rather than IP addresses. Many of these WAN services are sold through huge companies. It is also a technology for data transfer that boosts speed and regulates network traffic flow. The information is directed with this technology via a label rather than needing complicated surveys at every stop in a route cache.
Consider the following class in Java:
public class MountainBike extends Bicycle {
public int seatHeight;
public MountainBike(int startHeight,
int startCadence,
int startSpeed,
int startGear) {
super(startCadence, startSpeed, startGear);
seatHeight = startHeight;
}
public void setHeight(int newValue) {
seatHeight = newValue;
}
}
What is this trying to accomplish?
super(startCadence, startSpeed, startGear);
a. Four fields of the MountainBike class are defined: super, startCadence, startSpeed and startGear.
b. The constructor for the parent class is called.
c. A method of the MountainBike class named super is defined.
d. Three fields are defined for the MountainBike class as intances of the class named super.
Answer:
b. The constructor for the parent class is called.
Explanation:
In this case this specific piece of code is calling the constructor for the parent class. Since a MountainBike object is being created. This creation uses the MountainBike class constructor but since this is a subclass of the Bicycle class, the super() method is calling the parent class constructor and passing the variables startCadence, startSpeed, startGear to that constructor. The Bicycle constructor is the one being called by super() and it will handle what to do with the variables inputs being passed.
9.18 LAB: Exact change - methods Write a program with total change amount as an integer input that outputs the change using the fewest coins, one coin type per line. The coin types are dollars, quarters, dimes, nickels, and pennies. Use singular and plural coin names as appropriate, like 1 penny vs. 2 pennies. Ex: If the input is:
Answer:
Explanation:
The following code is written in Java. It asks the user to enter the amount of change needed. This is done as a double since we are dealing with coins and not full dollar values alone. It then makes the necessary calculations to calculate the number of each coin needed and outputs it back to the user. A test case has been provided in the picture below with a sample output.
import java.util.Scanner;
class Brainly {
public static void main(String[] args) {
int dollars = 1;
double quarters = 0.25;
double dimes = 0.10;
double nickels = 0.05;
double pennies = 0.01;
Scanner in = new Scanner(System.in);
System.out.println("Enter Change Value: ");
double change = in.nextDouble();
int numDollars, numQuarters, numDimes, numNickels, numPennies;
double newChange;
numDollars = (int) (change / dollars);
newChange = change % dollars;
numQuarters = (int) (newChange / quarters);
newChange = newChange % quarters;
numDimes = (int) (newChange / dimes);
newChange = newChange % dimes;
numNickels = (int) (newChange / nickels);
newChange = newChange % nickels + 0.001;
numPennies = (int) (newChange / pennies);
newChange = newChange % pennies;
System.out.println("Minimum Num of Coins needed: ");
if (numDollars != 1) {
System.out.println(numDollars + " Dollars");
} else {
System.out.println(numDollars + " Dollar");
}
if (numQuarters != 1) {
System.out.println(numQuarters + " Quarters");
} else {
System.out.println(numQuarters + " Quarter");
}
if (numDimes != 1) {
System.out.println(numDimes + " Dimes");
} else {
System.out.println(numDimes + " Dime");
}
if (numNickels != 1) {
System.out.println(numNickels + " Nickels");
} else {
System.out.println(numNickels + " Nickel");
}
if (numPennies != 1) {
System.out.println(numPennies + " Pennies");
} else {
System.out.println(numPennies + " Penny");
}
}
}
The program is an illustration of conditional statements
Conditional statements are used to make decisions
The program in C++ where comments are used to explain each line is as follows
#include<iostream>
using namespace std;
int main() {
// This line declare all the variables
int amount, dollar, quarter, dime, nickel, penny;
// This prompts the user for input (i.e. the amount)
cout<<"Amount: ";
//This gets the amount from the user
cin>>amount;
// This checks if the amount is 0 or less
if(amount<=0) {
//This prints "No Change"
cout<<"No Change";
}
//If the amount is greater than 0
else {
// These convert the amount to various coins
dollar = amount/100;
amount = amount%100;
quarter = amount/25;
amount = amount%25;
dime = amount/10;
amount = amount%10;
nickel = amount/5;
penny = amount%5;
// The next lines print the coins
if(dollar>=1) {
if(dollar == 1) {
cout<<dollar<<" dollar\n"; }
else {
cout<<dollar<<" dollars\n"; }
}
if(quarter>=1) {
if(quarter== 1) {
cout<<quarter<<" quarter\n";
}
else {
cout<<quarter<<" quarters\n";
}
}
if(dime>=1) {
if(dime == 1) {
cout<<dime<<" dime\n";
}
else {
cout<<dime<<" dimes\n";
}
}
if(nickel>=1) {
if(nickel == 1) {
cout<<nickel<<" nickel\n";
}
else {
cout<<nickel<<" nickels\n";
}
}
if(penny>=1) {
if(penny == 1) {
cout<<penny<<" penny\n";
}
else {
cout<<penny<<" pennies\n";
}
}
}
return 0;
}
Read more about conditions at:
https://brainly.com/question/15683939
1. What is memory mapped I/O?
Answer:
Memory-mapped I/O and port-mapped I/O are two complementary methods of performing input/output between the central processing unit and peripheral devices in a computer. An alternative approach is using dedicated I/O processors, commonly known as channels on mainframe computers, which execute their own instructions.
how much is this worth in dollars
Answer:
This is worth 50 dollars.
Explanation:
١ - one
٢ - two
٣ - three
٤ - four
٥ - five
٦ - six
٧ - seven
٨ - eight
٩ - nine
٠ - zero
What you see above is the ten digits in Arabic.
Both 5 (٥) and 0 (٠) appear here, thus representing 50.
what is the data type name for integer?
Answer:
the data type name for integer is int
Hope This Helps!!!
Explanation:
the integer data type ( int ) is used to represent whole numbers that can be stored within 32-bits. The big integer data type ( bigint ) is used to represent whole numbers that are outside the range of the integer data type and can be stored within 64 bits.When implementing a 1:1 relationship, where should you place the foreign key if one side is mandatory and one side is optional? Should the foreign key be mandatory or optional?
Answer:
When implementing a 1:1 relationship, the foreign key should be placed on the optional side if one side is mandatory and one side is optional.
When this is implemented, the foreign key should be made mandatory.
Explanation:
A foreign key (FK) is a primary key (PK) in relational databases. It is used to establish a relationship with a table that has the same attribute with another table in the database. A mandatory relationship exists when the foreign key depends on the parent (primary key) and cannot exist without the parent. A one-to-one relationship exists when one row in a data table may be linked with only one row in another data table.
Write a java program that reads a list of integers and outputs those integers in reverse. The input begins with an integer indicating the number of integers that follow. For coding simplicity, follow each output integer by a comma, including the last one. Assume that the list will always contain fewer than 20 integers.
Ex: If the input is:
5 2 4 6 8 10
the output is:
10,8,6,4,2,
To achieve the above, first read the integers into an array. Then output the array in reverse.
Answer:
Explanation:
using namespace std;
#include <iostream>
int Go()
{
int N;
int A[20];
cout << " How many integers do you have ??? :>";
cin >> N;
if (N>20) { N=20; }
for (int iLoop=0; iLoop<N; iLoop++)
{
cout << "Input integer # " << (iLoop+1) << " :>";
cin >> A[iLoop];
}
for (int iLoop=N-1; iLoop>=0; iLoop--)
{
cout << A[iLoop] << " ";
}
cout << endl;
}
int main()
{
Go();
}
A Java program that reads a list of integers and outputs them in reverse is written as,
import java.util.Scanner;
public class ReverseList {
public static void main(String[] args) {
Scanner scnr = new Scanner(System.in);
// Read the number of integers
int numIntegers = scnr.nextInt();
// Create an array to store the integers
int[] integers = new int[numIntegers];
// Read the integers into the array
for (int i = 0; i < numIntegers; i++) {
integers[i] = scnr.nextInt();
}
// Output the integers in reverse order
for (int i = numIntegers - 1; i >= 0; i--) {
System.out.print(integers[i]);
// Add comma unless it's the last integer
if (i > 0) {
System.out.print(",");
}
}
System.out.println(); // Add a new line at the end
}
}
Given that,
Write a Java program that reads a list of integers and outputs those integers in reverse.
Here, The input begins with an integer indicating the number of integers that follow.
For coding simplicity, follow each output integer by a comma, including the last one.
So, A Java program that reads a list of integers and outputs them in reverse:
import java.util.Scanner;
public class ReverseList {
public static void main(String[] args) {
Scanner scnr = new Scanner(System.in);
// Read the number of integers
int numIntegers = scnr.nextInt();
// Create an array to store the integers
int[] integers = new int[numIntegers];
// Read the integers into the array
for (int i = 0; i < numIntegers; i++) {
integers[i] = scnr.nextInt();
}
// Output the integers in reverse order
for (int i = numIntegers - 1; i >= 0; i--) {
System.out.print(integers[i]);
// Add comma unless it's the last integer
if (i > 0) {
System.out.print(",");
}
}
System.out.println(); // Add a new line at the end
}
}
Read more about java programming language at:
brainly.com/question/2266606
#SPJ4
