Answer:
Water takes more energy to heat up
Discuss how our lives on Earth are directly related to our relationship and positioning with the Sun in our Solar System.
Answer:
They are because 1. New years culture benefits 2. Gives the right amount of heat as well as a day/ night cycle and the 4 seasons because of the earths tilt
Answer:
Explanation:
Our lives on earth are directly connected to the sun and our solar system because they give the right amount of heat and as well as the day and night cycle. Furthermore, due to the earth’s tilt, we get our four seasons which are very important to us as humans, getting different seasons and weather conditions.
The solar system also affects the tides and
A Long time ago, the Moon was closer to the Earth and spinning rapidly. The Moon’s tidal bulges didn’t align with the Earth, and the Earth’s gravity tugged on them, slowing the Moon’s spin and moving it farther away. As it moved farther away, the time it took to orbit once around the Earth increased: Its orbital period got longer. Eventually, the lengthening rotation of the Moon matched how long it took to go around the Earth. When that happened, the axis of the bulges pointed right at the Earth. That’s why the Moon only shows one face to us! It spins once per month and goes around us once per month.
Gravity is a force, and it weakens with distance. An important thing to note is that we measure gravity from the center of mass of an object, not its surface. One way to think of the center of mass of an object is the average position in an object of all its mass. For an evenly distributed sphere, that’s its center.
Since gravity weakens with distance, the force of Earth’s gravity on your head is less than it is on your feet, it’s way too small for you to ever notice. This change in the force of gravity over distance is what astronomers call the tidal force. The overall effect of the tidal force is to stretch an object.
The Moon has gravity. Just as the bulge is pulling the Moon ahead, the Moon is pulling the bulge back, slowing it down. Because of friction with the rest of the Earth, this slowing of the bulge is actually slowing the rotation of the Earth itself, making the day longer. The effect is small, but it’s measurable.
The constellations and astronomy give us our zodiac signs, and from previous knowledge, I know that zodiac signs impact our personalities greatly. If constellations were not found then zodiac signs wouldn’t have been created.
IF YOU ANSWER I WILL MARK YOU BRAINLIEST
PPLLSSS
Answer:
the mushrooms
mushrooms are decomposers because they break down organic material around them.
give reason for the following observation
The smell of hot sizzling food reaches you several metres away but to get the smell from cold food you have to go close.
Answer: The smell of hot sizzling food reaches you several metres away, but to get the smell from cold food you have to go close because the kinetic energy of the particles of matter increases with the increase in temperature. In cold foods, kinetic energy is less while in hot foods, kinetic energy is more
hope this helps
Smell spreads due to diffusion. In hot food the molecules have a lot of kinetic energy , and they therefore spread fast , whereas in cold food the kinetic energy of the molecules are less and they don't spread far.
Lucas pushes on a car stuck in a ditch with a force of 1000 N for 15 minutes. The car remains stuck. How much work did Lucas do?
Your answer:
O 66.7)
0 0
o 1.22)
O 22,000
Answer:
I think it would be the second answer...
Explanation:
Hope this helps!
Lucas do a work of 0 joule. Hence, option (B) is correct.
What is work?The notion of work in science is significantly different from what it is understood to entail in ordinary life. Every time work is performed, energy is transmitted, as shown by the definition of work in physics.
A force must be applied and there must be movement in the force's direction for a work to be completed scientifically. Having said that, we may state that The product of the component of the force acting in the displacement's direction and its magnitude is work.
Mathematically work done can be expressed as:
work done = force × displacement × cosθ
Where θ is the angle between the force and the displacement .
Here, the car remains stuck, that means, no displacement happens. So. Lucas do a work of 0 joule.
Learn more about work here:
https://brainly.com/question/19382352
#SPJ6
A body at rest or moving with uniform velocity will have acceleration equals
to:
A.
1
B.
0
C.
Negligible
D.
Infinity
Answer:
B:O
Explanation:
As acceleration is the rate of change of velocity with time, if velocity is uniform, there will be no change in it and acceleration will be zero.
Magnitude of force F experienced by a certain object moving with speed v is given by F=Kv race to 2, where K is constant. Find the dimension of K
MT⁻¹
Explanation:Given equation:
F = Kv --------------(i)
Where;
F = Magnitude of force experienced by the object
v = speed at which the object is moving
K = constant.
To get the dimension of K, follow the following steps:
i. Make K subject of the formula in equation(i)
K = F / v
ii. Get the dimension of force F and speed v
Dimension of force = MLT⁻²
Dimension of velocity = LT⁻¹
iii. Substitute these dimensions into the result of (i) above;
K = MLT⁻² / LT⁻¹
iv. Simplify the result in (iii)
First, the Ls in the numerator and denominator will cancel out
K = MT⁻² / T⁻¹
Next, the Ts will be expressed as follows
K = MT⁻² x T¹ [using the law of indices]
K = MT⁻²⁺¹
K = MT⁻¹
Therefore, the dimension of K is MT⁻¹
Question 18 of 25
Which type of wave occurs where two different mediums meet?
A. Transverse
B. Electromagnetic
C. Longitudinal
D. Surface
The type of wave that occurs where two different mediums meet is known as a transverse wave. Hence, option A is correct.
What are waves?Wave is the regular, systematic spread of disturbances from one location to another. The ripples that travel on water's surface are the most well-known, but waves also exist in sound, sight, and the movement of subatomic particles.
The disturbance periodically oscillates with a set frequency and wavelength in the simplest waves. In contrast to electromagnetic waves, which can travel in a vacuum, mechanical waves, like sound, need a medium to move through. The characteristics of the medium affect how a wave travels across it.
A transverse wave's crest and trough are the high and low points, respectively. The shock absorbers and rarefactions of longitudinal waves are comparable to the troughs and crests of transverse waves. The wavelength is the separation between subsequent crests or troughs.
To know more about Waves:
https://brainly.com/question/3639648
#SPJ2
Sound travels slowest through gases _____________________. Group of answer choices because the molecules of gas are close together because gases are air because the molecules of gas are far apart because gases have the lowest temperature
For every action, there is an equal and opposite reaction.
Does the statement describe a scientific law?
Answer:
This is newton's 3rd law
Explanation:
(02.06)plz help me 20 points
Answer:
the answer is 80 degrees
Explanation:
Which two pairs of labeled stars (A-G) in the diagram have the same temperature?
Answer:
Please find the graph file in the question:
Explanation:
The D and E will be having the same temperature as they lie on the same line drown from the temp axis if it was drawn.
Which of the motion variables is the same in both thex and y axis?
A) velocity
B) acceleration
C) time
D) displacement
Answer:
Acceleration (b) not sure tho
Explanation:
A 8.6*10^ -6 C charge is places 1.00 m away from a 2.3 * 10 ^ - 4 * C charge. How large is the force of repulsion between the two charges?
Answer:
The force of repulsion is 17.802 N
Explanation:
Given;
magnitude of the first charge, q₁ = 8.6 x 10⁻⁶ C
magnitude of the second charge, q₂ = 2.3 x 10⁻⁴ C
distance between the two charges, r = 1 m
The force of repulsion is calculated using Coulomb's law;
[tex]F = \frac{Kq_1q_2}{r^2} \\\\F = \frac{9\times 10^9 \times 8.6\times 10^{-6} \times 2.3\times 10^{-4}}{1^2} \\\\F = 17.802 \ N[/tex]
Therefore, the force of repulsion is 17.802 N
Complete the statement by filling in the Blanks:
In this experiment, the (Blank) was intentionally manipulated. This was the independent variable. The dependent variable measured was the (Blank).
Options for the Blanks:
- Induced Current
- Magnet Polarity
- Magnet Strength
Answer:
induced current
Explanation:
intentionally manipulated.
Answer:
1. Magnet Polarity 2.Induced Current
Explanation:
Like the guy above said
Describe the parts of the wheel and axle
Answer:
A simple machine that may be used the most often is called the wheel and axle. The wheel and axle has two basic parts: wheel and axle. It has two circular objects which includes a larger disc and a small cylinder both joined at the center.
Explanation:
Explanation:
A simple machine that may be used the most often is called the wheel and axle. The wheel and axle has two basic parts: wheel and axle. They can be found everywhere. It has two circular objects which includes a larger disc and a small cylinder both joined at the center.The large disc is the wheel, and the small cylinder or rod is the axle. There may be two wheels attached to the axle.
There are two basic ways a wheel and axle can work together to help move things.
1. The Force is applied to the Wheel
For example, a screwdriver is an example of a wheel and axle. The handle is the wheel where the force is applied. It turns or spins and increases the force of the shaft or axle, which helps turn the screw.
Another example of force being applied to the wheel is when a doorknob is turned. The wheel (doorknob) is turned and the locking mechanism connected to the shaft turns and the door can then be opened.
2. The Force is applied to the Axle
A Ferris wheel is an example of force being applied to the axle. When the axle turns it results in the giant wheel turning. The wheel is much larger than the axle and covers more distance and area. A ceiling fan works the same way.
find out the speed of the car from home to school in meters per second.
Time - 15 mins
Distance - 8 km
1.875
Explanation:
speed = distance moved ÷ time taken
The same wave travels for 2 seconds, what is its frequency?*
Answer:
In waves distance is measured by wave length and time is measured by frequency or period.
velocity ratio=wave length multiply by frequency.
HENCE, if the same wave travels for 2 econds its frequency will be 2Hz.
Explanation:
Gravitational potential energy is always calculated with
kinetic energy
mechanical energy
total potential energy
mass gravity and height
Answer:
kinetic energy as it involves dispersal of energy
Which of the following measurements require the use of scientific notation?
A. The length of your hair
B. The distance to the sun
C. The width of your hand
D. Distance to Indianapolis in miles
Pascal in term fundamental unit is?
Answer: SI unit of pressure
Explanation: The pascal (pronounced pass-KAL and abbreviated Pa) is the unit of pressure or stress in the International System of Units (SI). Reduced to base units in SI, one pascal is one kilogram per meter per second squared; that is, 1 Pa = 1 kg · m-1 · s-2.
Hope this helps! Have a fantastic rest of ur day, luv!
A person riding a bike has a total mass of 95 kg, if the person bike system is moving at a velocity of 5 m/s, how much kinetic energy is there?
Answer:
Kinetic energy is 1187.5J
What the answer to the three of them ill mark brainlest
lhormmia masng ies igentetel
Explanation:
What is the mass of an object if a net force of 18 N causes it to accelerate at 15 m/s^2?
Answer:
1.2 kg
Explanation:
F = 18N
a = 15 m/s^2
F = ma
18 = 15m
m = 1.2 kg
a hotgas is injected into at engine at 573 k and exhausts at 343 k. what is the highest efficiency of thisengine?
Answer:
230k
Explanation:
energy capacity maximum is 573 total available. 343k of that energy is present at release and subsequent loss leaving max used energy of 230k.
Which property of the coating on fiber-optic strands makes light visible only at the ends of the strands?
reflectivity
absorbency
transparency
translucency
The answer is A, Hope this helps and sorry for being late :)
The atomic mass of calcium is 40.08. What is the mass of 6.02 × 1023 atoms of calcium?
Answer:
It is 40.08 g
Explanation:
[tex]6.02 \times 10 {}^{23} \: atoms = 1 \: mole = 40.08 \: g[/tex]
The total momentum before a collision is___to the total momentum after a collision
Answer:
Equal
Explanation:
The law of conservation of energy states that the total momentum before and after a collision are equal
Answer:
Equal to the total momentum of the two objects after the collision.
what is unit of pressure?why is it called a derived unit ? give reasons
Answer:
Unit of pressure is pascal (Pa)
The SI-derived unit of measurement for pressure. The pascal is one newton (an SI-derived unit itself) per square meter.
PLS HELPP HURRYYY
The trapdoor swings open and the ball falls to the ground. The ball does not bounce when it hits the ground. Show that the final speed of the ball at the instant before it hits the ground is about 5 m/s.
Answer:
5 m/s
Explanation:
As the ball falls to the ground, it is acted upon by a force which is due to the gravitational force. Hence, the ball falls with an acceleration called the acceleration due to gravity.
Let us assume that the acceleration due to gravity (g) = 10 m/s², Since initially, the body was at rest, hence the initial velocity (u) = 0 m/s. The height to the ground (h) = 1.3 m. Hence using the equation of motion, the final velocity (v) is:
v² = u² + 2gh
Substituting:
v² = 0² + 2(10)(1.3)
v² = 26
v = √26 = 5
v = 5 m/s
I will be so thankful if u answer correctly!!
(a) 10N
Explanation:The sketch of the two cases has been attached to this response.
Case 1: The box is pushed by a horizontal force F making it to move with constant velocity.
In this case, a frictional force [tex]F_{r}[/tex] is opposing the movement of the box. As shown in the diagram, it can be deduced from Newton's law of motion that;
∑F = ma -------------------(i)
Where;
∑F = effective force acting on the object (box)
m = mass of the object
a = acceleration of the object
∑F = F - [tex]F_{r}[/tex]
m = 50kg
a = 0 [At constant velocity, acceleration is zero]
Substitute these values into equation (i) as follows;
F - [tex]F_{r}[/tex] = m x a
F - [tex]F_{r}[/tex] = 50 x 0
F - [tex]F_{r}[/tex] = 0
F = [tex]F_{r}[/tex] -------------------(ii)
Case 2: The box is pushed by a horizontal force 1.5F making it to move with a constant velocity of 0.1m/s²
In this case, the same frictional force [tex]F_{r}[/tex] is opposing the movement of the box.
∑F = 1.5F - [tex]F_{r}[/tex]
m = 50kg
a = 0.1m/s²
Substitute these values into equation (i) as follows;
1.5F - [tex]F_{r}[/tex] = m x a
1.5F - [tex]F_{r}[/tex] = 50 x 0.1
1.5F - [tex]F_{r}[/tex] = 5 ---------------------(iii)
Substitute [tex]F_{r}[/tex] = F from equation (ii) into equation (iii) as follows;
1.5F - F = 5
0.5F = 5
F = 5 / 0.5
F = 10N
Therefore, the value of F is 10N
