Answer:
Parte A
El ángulo con respecto al horizonte, de la segunda cuerda es de aproximadamente 19,47°
Parte B
La masa de la caja que se va a sostener es de aproximadamente 0,7808 kg.
Explanation:
Parte A
Los parámetros dados son;
La tensión en la cuerda, T₁ = 8 N
La tensión en la cuerda, T₂ = 6 N
El ángulo de inclinación de la primera cuerda con la horizontal, θ₁ = 45°
Sea θ₂ el ángulo de inclinación de la segunda cuerda, obtenemos;
T₁·cos (θ₁) = T₂·cos (θ₂)
∴ 8 N × cos (45°) = 6 N × cos (θ₂)
cos (θ₂) = 8 N × cos (45°) / (6 N) = (√2)/2 × (4/3) = (2·√2)/3
θ₂ = arcos ((2·√2) / 3) ≈ 19,47°
El ángulo con respecto al horizonte, de la segunda cuerda, θ₂ ≈ 19,47°
Parte B
El peso de la caja, W = T₁·sin (θ₁) + T₂·sin (θ₂)
∴ W = 8 N × sen (45 °) + 6 N × sen (19,47 °) ≈ 7,66 N
El peso de la caja que se va a sostener, W ≈ 7,66 N
La masa de la caja que se va a sostener, m ≈ 7,66 N / (9,81 m/s²) ≈ 0,7808 kg
A student attaches a rope to a box and pulls the box up a ramp as shown below. The ramp has a rough surface. When
drawing the free body diagram for the box, the friction force should be directed:
O up and to the right
down and to the left
up and to the left
to the left
NEXT QUESTION
ASK FOR HELP
TURN ITIN
How does work affect energy between objects so it can cause a change in the form of energy?
A. Work transfers energy.
B. Work changes energy.
C. Work increases energy.
D. Work decreases energy.
State any ten reasons why students in Uganda need to study physics.(use examples of the possible technological advancements which can be made using the knowledge of physics)
Answer:
The answer is "physics ".
Explanation:
Physics is the branch of science that addresses the properties of crystalline and its interaction with the fundamental elements of the universe. It covers subjects ranging in quantum mechanics with extremely little ones with quantum mechanics to the whole cosmos. You must be constant whether you like it or not, thus everyone must learn physics, irrespective of whether they're in Uganda, and plenty of other countries should have physics to dare study.
A stationary body explodes into four identical fragments such that three of them fly off mutually perpendicular to each other, each with same KE, E 0 . The energy of explosion will be Aa
Answer:
6Eo
Explanation:
kettles heated on stoves used to be made of copper. was this a good choice?
Kettles heated on stoves are used to be made up of copper. This is because copper is a good conductor of heat and electricity.
Why copper is used in making kettles?Copper is used in making kettles. This is because copper is an excellent choice for a tea kettle as it is an excellent conductor of heat and electricity. This means that copper heats up quickly and evenly, making it ideal for the purpose of boiling water and preparing tea. Copper is also a durable material which can last for many years with proper care.
Copper kettles are polished from the outer surface as it is subject to corrosion that is caused by salts and sulfates. If the kettles are not cleaned completely, this corrosion, even as a slight film, will affect the taste of what is prepared in that copper kettle, giving a metallic sensation to taste.
Learn more about Copper here:
https://brainly.com/question/13677872
#SPJ2
12. Which of these is more dense?
A. 10kg of a block of wood
B. 1kg of a block of styrofoam
C. 1kg of feathers
D. 10kg of feathers
E. 10kg of stryfoam
F. 1 kg of wood
Answer:
answer is E
Explanation:
A body weighing 50 N is placed on a wooden table. How much force is required to set it into motion? Coefficient of friction between the table and the body is 0.3.
If the coefficient of static friction is 0.3, then the minimum force required to get it moving is equal in magnitude to the maximum static friction that can hold the body in place.
By Newton's second law,
• the net vertical force is 0, since the body doesn't move up or down, and in particular
∑ F = n - mg = n - 50 N = 0 ==> n = 50 N
where n is the magnitude of the normal force; and
• the net horizontal force is also 0, since static friction keeps the body from moving, with
∑ F = F' - f = F' - µn = F' - 0.3 (50 N) = 0 ==> F' = 15 N
where F' is the magnitude of the applied force, f is the magnitude of static friction, and µ is the friction coefficient.
A scientist wants to use a model to help present results of his detailed scientific investigation
What is the relationship between Avogadro's number and a mole?
A. There are 6.02 x 1023 items in a mole, which equals Avogadro's
number
B. A mole is a smaller amount than Avogadro's number.
C. Avogadro's number is used to count particles, and a mole is used
to measure mass.
D. A mole applies to any item, but Avogadro's number is limited to
atoms.
SUBM
Answer:
A. There are 6.02 x 1023 items in a mole, which equals Avogadro's
number
Explanation:
The mole of a substance is
The U.S. has plans to build a 30-meter telescope, while the Europeans are thinking about a 39-meter telescope. What technological innovation allows astronomers to be thinking about telescopes with that large an aperture
Answer:
The mirror in these telescopes will be constructed from many smaller mirrors which will work together.
Explanation:
A telescope is defined as an optical instrument that is used to observe or view the distant objects. A telescope is made up of curved lenses or mirrors or by combining both.
In the context, both the US and the Europeans are planning to make a telescope which is 30 m and 39 m respectively. This could be possible as the mirrors that are used to make these telescope will be made from a many smaller mirrors that will work together as a single large mirror having a very large aperture.
A woman wearing high heels will find difficult to walk on the sandy beach than if she wears flat sole sandals. Why?
Explanation:
the high heels has a more pressure than flat soles bcoz small area has more pressure than large area.
A car is stationary. It accelerates at 0.8 ms^2
for 10 s and then at 0.4 ms^2
for a further 10 s. Use
the equations of motion to deduce the car’s final displacement. You will have to split the journey
into two parts, since the acceleration changes after 10 s.
Answer:
the car’s final displacement is 60 m
Explanation:
Given;
initail velocity of the car, u = 0
acceleration of the car, a = 0.8 m/s²
time of motion, t = 10 s
The first displacement of the car:
[tex]x_1 = ut + \frac{1}{2} at^2\\\\x_1 = 0 + \frac{1}{2} (0.8)(10)^2\\\\x_1 = 40 \ m[/tex]
The second displacement of the car;
acceleration, a = 0.4 m/s², time of motion, t = 10 s
[tex]x_2 = ut + \frac{1}{2} at^2\\\\x_2 = 0 + \frac{1}{2} (0.4)(10)^2\\\\x_2 = 20 \ m[/tex]
The final displacement of the car;
x = x₁ + x₂
x = 40 m + 20 m
x = 60 m
Therefore, the car’s final displacement is 60 m
¿ Sobre que superficie se desplazara mas rápidamente un tejo, sobre cemento o sobre cerámica? ¿por que?
Answer:
cemento potque es plano
Atoms contain both positive nuclei and a negative electron cloud. Which of the following would cause an attraction between two atoms?
A. The nucleus of one atom and the electron cloud another atom
B.The nucleus of one atom and the nucleus of another atom
C. The electron cloud of one atom and the electron cloud of another atom
D.None of these would cause an attraction between atoms
Answer:
Option (D)
Explanation:
A. The nucleus of one atom and the electron cloud of the another atom will not the cause of attraction.
B. The nucleus of one atom and the other atom will not cause the attraction.
C. The electron cloud of one atom and the electron cloud of the another will not cause attraction.
D. So, this option is correct.
When applying an arm sling, the injured arm's hand should be placed in a ________ position in the sling, and above the level of the elbow.
Answer:
The answer is "thumb-up".
Explanation:
The sling often called the arm sling, is a solution for preventing either shoulder or elbow motion during healing. A triangle bandage could be constructed.
A sling is a strong tissue loop that descends from the head to hold the forearm. The armrests in the sling bent also at the elbow.
The injured hand of the forearm should be positioned inside the pin position in the joint above the level of the elbow when putting the forearm sling.
Infrared telescopes are usually placed on high-flying airplanes or on satellites in space __________
Answer:
In order to improve visibility
Explanation:
Infrared telescopes are made using infrared cameras that contain infrared detectors which are solid-state and are maintained at very cold (cryogenic) temperatures
Infrared radiation is absorbed by water vapor which is present in the Earth's atmosphere, leading to the limitation of the use of infra red telescopes at high altitudes such as mountains, high flying planes or satellites
train starting from a railway station and moving with a uniform accleration attains a speed of 90km/hr in 10s .Find the accleration
Options
90m/s2
1m/s2
10m/s2
0.1m/s2
Answer:
a= 2.5m/s²
Explanation:
U=0
V=90km/hr
T= 10s
Convert 90km/hr to m/s
1km= 1000m
1hr= 3600s
(60×60)
therefore, 90km/hr = 90000/3600
90km/hr= 25m/s
From Newton First Equation,
V=U + AT
25=0+ A(10)
25= 10A
25/10 =10A/10
A= 2.5m/s²
coulomb what is the meaning in physics??
Answer:
Coulomb, unit of electric charge in the metre- kilogram- second- ampere system, the basis of SI system of physics unit. The coulomb is defined as the quantity of electricity transported in one second by a current of one ampere.
Help me and I'll make u Brainliest and follow u
26. D. crushing the sugar cube and dissolving it in water.
27. A. atom
28. B. molecule
29. B. plum pudding model of Joseph John Thomson
30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons.
31. D. protons and neutrons are relatively heavier than electrons.
three condensers are connected in series across a 150 volt supply. The voltages across them are 40,50 and 60 volts respectively, and the charge on each condenser is 6×10^-8(a) calculate the capacitance of each condenser (b)calculate the effective capacitance of the combination
Explanation:
Given that,
The voltages across them are 40,50 and 60 volts respectively, and the charge on each condenser is 6×10⁻⁸ C.
(a) Capacitance of capacitor 1,
[tex]C_1=\dfrac{Q}{V_1}\\\\C_1=\dfrac{6\times 10^{-8}}{40}\\\\C_1=1.5\times 10^{-9}\ F\\\\C_1=1.5\ nF[/tex]
Capacitance of capacitor 2,
[tex]C_2=\dfrac{Q}{V_2}\\\\C_2=\dfrac{6\times 10^{-8}}{50}\\\\C_2=1.2\times 10^{-9}\ F\\\\C_2=1.2\ nF[/tex]
Capacitance of capacitor 3,
[tex]C_3=\dfrac{Q}{V_3}\\\\C_3=\dfrac{6\times 10^{-8}}{60}\\\\C_3=1\times 10^{-9}\ F\\\\C_3=1\ nF[/tex]
(b) The equivalent capacitance in series combination is :
[tex]\dfrac{1}{C}=\dfrac{1}{C_1}+\dfrac{1}{C_2}+\dfrac{1}{C_3}\\\\\dfrac{1}{C}=\dfrac{1}{1.5}+\dfrac{1}{1.2}+\dfrac{1}{1}\\\\C=0.4\ nF[/tex]
Hence, this is the required solution.
During an Apollo lunar landing mission, the command module continued to orbit the Moon at an altitude of about 112 km . How long did it take to go around the Moon once?
Express your answer using three significant figures and include the appropriate units.
T=2 Hours 6 Minutes 33.53 Seconds
please help me with this question
Answer:
(4) A = 3 A, A₂ = 11 A
(5) 7 A
Explanation:
(4)
From the diagram,
A = 3+6+2
A = 11 A
V = A₂R
A₂ = V/R₂............ Equation 1
Given: V = 12 V, R₂ = 4 Ω
Substitute these values into equation 1
A₂ = 12/4
A₂ = 3 A
(5) Applying,
V = IR'
I = V/R'............ Equation 1
Where V = Voltage, I = cuurent, R' = total resistance.
But,
1/R' = (1/3)+(1/4)
1/R' = (3+4)/12
1/R' = 7/12
R' = 12/7 Ω
Given: V = 12 V
Substitute these values into equation 1
I = 12/(12/7)
I = 7 A
Therefore
A = 7 A
is acting on an object that is constrained to move along the x-axis. If the force moves the object 3m, from the origin, what is the potential energy difference due to this force acting on the object
Answer:
U = - ∫ F dx
U = - 3F₀
Explanation:
Force and potential energy are related
F = [tex]- \frac{dU}{dx}[/tex]
dU = - F dx
∫ dU = - ∫ F dx
U- U₀ = - ∫ F dx
to solve the problem we must know the form of the force, if we assume that F = F₀ and U₀ = 0 for x = 0
U = - F₀ 3
If a wire lies withina magnetic field what must be true for the magnetic field to produce an electric current in the wire
Answer:
The magnetic field through the wire must be changing
Explanation:
According to Faraday's law, the induced emf, ε in a metallic conductor is directly proportional to the rate of change of magnetic flux,Φ through it. This is stated mathematically as ε = dΦ/dt.
Now for the wire, the magnetic flux through it is given by Φ = ABcosθ where A = cross-sectional area of wire, B = magnetic field and θ = angle between A and B.
So, dΦ/dt = dABcosθ/dt
Since A and B are constant,
dΦ/dt = ABdcosθ/dt = -(dθ/dt)ABsinθ
Since dθ/dt implies a change in the angle between A and B, since A is constant, it implies that B must be rotating.
So, for an electric current (or voltage) to be produced in the wire, the magnetic field must be rotating or changing.
A shell is fired at an initial speed of 2500 m/s at an initial angle of 45 degrees. Find the shell's horizontal range and the amount of time the shell is in motion. (note that because it is fired from the ground to the ground, they displacement = 0.)
Answer:
d= 637323 meters
t= 360.5 seconds
Answer:
Explanation:
Since the height from which the shell was fired is the same as the height at which it lands (on the ground, to be specific), we will use the range equation. That is the only time you CAN use the range equation (when the initial height and the final height are exactly the same). The range equation is:
[tex]r=\frac{v_0^2sin(2\theta)}{g}[/tex] where v0 is the initial velocity, theta is the angle, and g is the pull of gravity (NOT negative). Filling in:
[tex]r=\frac{(1500)^2sin(9.0*10^1)}{9.8}[/tex] so, doing all that math gives us:
r = 6.4 × 10⁵ meters
4. A bullet of mass 30 g is fired from a rifle of mass 5kg at a speed of 259m/s.
a) What is the momentum of the rifle just after the bullet is fired?
b) What is the recoil velocity of the rifle?
Answer:
Rifle Momentum=7.77kg*m/s v'= 1.554 m/s
Explanation:
a) m1v1 + m2v2 = m1v1' + m2v2'
0+0 = 0.03*259 + P(rifle momentum)
solve for P
p= 7.77kg*m/s
b) 7.77= 5*v'
v'= 1.554 m/s
The momentum of the rifle just after the bullet is fired is 7.77 kg.m/s and the recoil velocity of the rifle at the time of firing is 1.554 m/s.
What is momentum?
Momentum of a particle is the product of the mass of the particle and its velocity. Momentum is a vector quantity. It has both the magnitude and direction of motion. According to the Newton's second law of motion, the rate of change of the momentum is equal to the force acting on the particle which is in motion.
Momentum can be calculated by the general formula
p = m.v
where, p = momentum of the particle,
m = mass of the particle,
v = velocity of the particle.
Rifle Momentum= mass × velocity
P = m × v'
a) m1v1 + m2v2 = m1v1' + m2v2'
0+0 = 0.03 × 259 + P(rifle momentum)
0 = 7.77 + P
P = 7.77kg.m/s
b) p = m × v
7.77= 5 × v'
v'= 1.554 m/s
Learn more about Momentum here:
https://brainly.com/question/24030570
#SPJ2
3.00 m^3 of water is at 20.0°C.
If you raise its temperature to
60.0°C, by how much will its
volume expand?
Water
ß = 207•10-6C-1
(Unit = m^3)
Answer:
9m^3
Explanation:
Given data
volume v1= 3m^3
volume v2= ???
Temperature T1= 20.0°C.
Temperature T2= 60.0°C.
Applying the relation for temperature and volume
V1/T1= V2/T2
substitute
3/20= V2/60
3*60= V2*20
180= 20*V2
180/20= V2
V2= 9m^3
Hence the final volume is 9m^3
A 5,400 W motor is used to do work. If the motor is used for 640 s, about how much work could it do?
8.4 J
4,800 J
6,000 J
3,500,000 J
Answer:
3,500,000 J
Explanation:
WORK = POWER * TIME
WORK= 5400 * 640
=6456000 J = 3,500,000 J
Answer:
D
Explanation:
edge2021
4. Which of the following statement describes the particle model.
A. The average kinetic energy of the particles changes easily
B. All matter is made up of large triangular particles
C. There are no spaces between the particles
D. The average kinetic energy of all the particles remains constant
E.Other:
What happens in a series circuit when more bulbs are added? (Example: I start out with a complete series circuit with 2 bulbs. Then I add in several more wires and several more bulbs & bulb holders. Now I have a complete series circuit with 5 bulbs).
Answer:
when we add elements in a series circuit the voltage across each element decreases
Explanation:
In a series circuit the current the whole circuit is the same, since there is only one path,
resistance is the sum of the resistance of each element
R_{eq} = ∑ R_i
if we write ohm's law
V = i R_{eq}
we substitute
V = i ∑ R_i
therefore the total voltage is
V = ∑ i R_i = ∑ V_i
With this expression we see that the voltage decreases as we place more elements in the series circuit.
Specifically when we fear two elements the voltage across each element is
V_i = V / 2
when we have 5 elements the voltage across each element is
V_i = V / 5
therefore when we add elements in a series circuit the voltage across each element decreases
