For each of the salts on the left, match the salts on the right that can be compared directly, using Ksp values, to estimate solubilities. (If more than one salt on the right can be directly compared, include all the relevant salts by writing your answer as a string of characters without punctuation, e.g, ABC.) fill in the blank 1 1. manganese(II) sulfide A. CuS fill in the blank 2 2. calcium fluoride B. FeS C. PbCl2 D. CaCrO4 Write the expression for K in terms of the solubility, s, for each salt, when dissolved in water. manganese(II) sulfide calcium fluoride Ksp

Answers

Answer 1

Answer:

For each of the salts on the left, match the salts on the right that can be compared directly, using Ksp values, to estimate solubilities. (If more than one salt on the right can be directly compared, include all the relevant salts by writing your answer as a string of characters without punctuation, e.g, ABC.) fill in the blank 1 1. manganese(II) sulfide A. CuS fill in the blank 2 2. calcium fluoride B. FeS C. PbCl2 D. CaCrO4 Write the expression for K in terms of the solubility, s, for each salt, when dissolved in water. manganese(II) sulfide calcium fluoride Ksp


Related Questions

Calculate the mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the following balanced chemical equation: 2 Al + 6 HCl → 2 AlCl3 + 3 H2

Answers

Answer: The mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.

Explanation:

The given balanced reaction equation is as follows.

[tex]2Al + 6HCl \rightarrow 2AlCl_{3} + 3H_{2}[/tex]

Here, the mole ration of Al and hydrogen produced is 2 : 3

As mass of aluminum is given as 26.98 g. So, moles of aluminum (molar mass = 26.98 g/mol) is as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{26.98 g}{26.98 g/mol}\\= 1 mol[/tex]

So, when 1 mole of Al reacted then 1.5 moles of hydrogen is produced as per the given mole ratio.

Therefore, mass of hydrogen formed is calculated as follows.

[tex]mass = moles \times molar mass\\= 1.5 mol \times 2.02 g/mol\\= 3.03 g[/tex]

Thus, we can conclude that the mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.

I need help and don’t understand, where does each chemical reaction go?

Answers

Answer:For the 1st box it starts with 250 and for the 2nd box it starts with CO(2).

Explanation:

A diver exhales a bubble with volume of 250 mL at pressure of 2.4 atm and temperature of 15 C. How many gas particulate in this bubble?

Answers

Answer:

1.5x10²² particulates

Explanation:

Assuming ideal behaviour, we can solve this problem by using the PV=nRT formula, where:

P = 2.4 atmV = 250 mL ⇒ 250 / 1000 = 0.250 Ln = ?R = 0.082 atm·L·mol⁻¹·K⁻¹T = 15 °C ⇒ 15 + 273 = 288 K

We input the given data:

2.4 atm * 0.250 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 288 K

And solve for n:

n = 0.025 mol

Finally we calculate how many particulates are there in 0.025 moles, using Avogadro's number:

0.025 mol * 6.023x10²³ particulates/mol = 1.5x10²² particulates

Molecule contains carbon, hydrogen and sulfur atoms. When a sample of 0.535g of this compound is burnt in oxygen, 1.119 g of CO2and 0.229 gof H2O and 0.407g of SO2are obtained.
Calculate its empirical formula.

Answers

Answer:

The empirical formula is, C4H4S

Explanation:

Number of moles of carbon = 1.119 g/ 44g/mol = 0.025 moles

Mass of Carbon= 0.025 moles × 12 g/ mole = 0.3 g

Number of moles of hydrogen = 0.229/18g/mol × 2 = 0.025 moles

Mass of hydrogen = 0.025 moles × 1 = 0.025 g

Number of moles of sulphur = 0.407g/ 64 g/mol = 0.0064 moles

Mass of sulphur= 0.0064 moles ×32 = 0.2 g

Now we obtain the mole ratios by dividing through by the lowest ratio.

C- 0.025 moles/ 0.0064 moles, H- 0.025 moles/ 0.0064 moles, S- 0.0064 moles/0.0064 moles

C4H4S

identify the organ system pictured below and state two functions of this system in the body​

Answers

Answer:

skeletal system

Explanation:

to create and fliter blood and provide frame-work to the human body and support

An elementary step is defined as a chemical collision in a reaction mechanism. A collection of different types of collisions makes up the reaction mechanism, so elementary steps provide a molecular view of the overall reaction.

a. True
b. False

Answers

The answer is A. True
A. True is your answer hope this helps

The information code that an organism inherits can best be referred to as its -
O A genotype
B. territory
C. species
D. kingdom

Answers

Answer:

it will be no.A genotype

Which area has atmospheric conditions that produce the lowest boiling point for water? OA. an ocean beach ОВ. an underground mine OC. a mountain peak OD. the middle of the ocean​

Answers

Answer:

C. a mountain peak

Explanation:

Boiling occurs when vapour pressure equals atmospheric pressure.  The vapour pressure is the pressure used by the gas leaving the pot and those returning. For boiling to occur, the vapour pressure must pass the atmospheric pressure around.  At sea level, the atmospheric pressure is very high. With altitude, the air becomes thinner and atmospheric pressure becomes lower. With increasing altitude, the low atmospheric pressure makes the boiling point lower as a result of the decreasing pressure on the vapour.  The boiling point can then easily be reached at higher altitudes. Therefore, a mountain peak has atmospheric conditions that produce the lowest boiling point for water as it has a higher altitude.

A particle that travels around the nuceleus of an atom in orbitals is called?

Answers

….yes that’s correct it is a quark:)

Which statement best describes the intermolecular forces between H2
molecules and NH3 molecules in the liquid phase?
A. Dipole-dipole forces are the strongest force between H2
molecules, and Van der Waals forces are the strongest force
between NH3 molecules.
B. Van der Waals forces are the strongest force between H2
molecules, and hydrogen bonding is the strongest force between
the NH3 molecules.
C. Hydrogen bonding is the strongest force between H, molecules
and between NH3 molecules.
D. Van der Waals forces are the strongest force between H2
molecules and between NH3 molecules.

Answers

Answer:

D. Van der Waals forces are the strongest force between H2

molecules and between NH3 molecules.  

Explanation:

Van der Waal’s forces are the forces which arises due to disturbance in the electron density of the molecule.  

These are usually found in non polar molecules. Hence N2 is said to exhibit this force.

Out of these Van der Waals is the weakest force.

A buffer solution contains 0.475 M nitrous acid and 0.302 M sodium nitrite . If 0.0224 moles of potassium hydroxide are added to 150 mL of this buffer, what is the pH of the resulting solution

Answers

Answer: The pH of the resulting solution will be 3.001

Explanation:

Molarity is calculated by using the equation:

[tex]\text{Molarity}=\frac{\text{Moles}}{\text{Volume}}[/tex]          ......(1)

We are given:

Moles of NaOH = 0.0224 moles

Molarity of nitrous acid = 0.475 M

Molarity of sodium nitrite = 0.302 M

Volume of solution = 150 mL = 0.150 L          (Conversion factor: 1 L = 1000 mL)

Putting values in equation 1, we get:

[tex]\text{Moles of nitrous acid}=(0.475mol/L\times 0.150L)=0.07125mol[/tex]

[tex]\text{Moles of sodium nitrite}=(0.302mol/L\times 0.150L)=0.0453mol[/tex]

The chemical equation for the reaction of nitrous acid and NaOH follows:

                   [tex]HNO_2+NaOH\rightleftharpoons NaNO_2+H_2O[/tex]

I:                0.07125     0.0224     0.0453

C:             -0.0224     -0.0224   +0.0224

E:              0.04885         -          0.0677

The power of the acid dissociation constant is the negative logarithm of the acid dissociation constant. The equation used is:

[tex]pK_a=-\log K_a[/tex]        ......(2)

We know:

[tex]K_a[/tex] for nitrous acid = [tex]7.2\times 10^{-4}[/tex]

Using equation 2:

[tex]pK_a=-\log (7.2\times 10^{-4})=3.143[/tex]

To calculate the pH of the acidic buffer, the equation for Henderson-Hasselbalch is used:

[tex]pH=pK_a+ \log \frac{\text{[conjugate base]}}{\text{[acid]}}[/tex]         .......(3)

Given values:

[tex][NaNO_2]=\frac{0.0677}{0.150}[/tex]

[tex][HNO_2]=\frac{0.04885}{0.150}[/tex]

[tex]pK_a=3.143[/tex]

Putting values in equation 3. we get:

[tex]pH=3.143-\log \frac{(0.0677/0.150)}{(0.04885/0.150)}\\\\pH=3.143-0.142\\\\pH=3.001[/tex]

Hence, the pH of the resulting solution will be 3.001

How many grams of Al2O3 is extracted from 250. g of FeO?

Answers

Answer:

[tex]m_{Al_2O_3}=118.27gAl_2O_3[/tex]

Explanation:

Hello there!

In this case, if we consider the following chemical reaction, whereby Al2O3 is produced from Al and FeO:

[tex]3FeO+2Al\rightarrow 3Fe+Al_2O_3[/tex]

Thus, since there is 3:1 mole ratio of FeO to Al2O3, it turns out feasible for us to use their molar masses, 71.844 g/mol and 101.96 g/mol respectively, to obtain the grams of the latter as follows:

[tex]m_{Al_2O_3}=250.gFeO*\frac{1molFeO}{71.844gFeO}*\frac{1molAl_2O_3}{3molFeO} *\frac{101.96gAl_2O_3}{1molAl_2O_3}\\\\m_{Al_2O_3}=118.27gAl_2O_3[/tex]

Regards!

Why is iodine always Used in a solution containing excess I2

Answers

Answer:

If a standard iodine solution is used as a titrant for an oxidizable analyte, the technique is iodimetry. If an excess of iodide is used to reduce a chemical species while simultaneously forming iodine.

Iodine always used in a solution excess KI is given to aid in the solubilization of free iodine, which would be insoluble in clean water during normal circumstances.

What is Iodine?

Iodine is a kind of element which are mainly used in iodometry titration. It can be represented by I.

What is solution?

A solution would be a homogenous mixture of two components, usually a solute as well as a solvent.

Iodimetry would be a technique that uses a standard iodine solution as a titrant for such an oxidizable analyte. When an excessive amount of iodide is used to decrease a chemical while somehow producing iodine.

To know more about iodine and solution

https://brainly.com/question/16867213

#SPJ2

An infant acetaminophen suspension contains 80 mg/0.80 mL suspension. The recommended dose is 15 mg/kg body weight.
How many milliliters of this suspension should be given to an infant weighing 13 lb.

Answers

Answer:

0.8853 mL

Explanation:

First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:

13 lb * [tex]\frac{0.454kg}{1lb}[/tex] = 5.902 kg

Then we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:

15 mg/kg * 5.902 kg = 88.53 mg

Finally we calculate the required mL of suspension, using its concentration:

88.53 mg ÷ (80 mg/0.80 mL) = 0.8853 mL

chemical properties of epoxide​

Answers

Answer:

Epoxides, also called oxiranes, have a three-membered ring structure with one oxygen and two carbon atoms.

Epoxides can be formed from alkenes by reaction with peroxy acids (MCPBA for example).

Epoxides can be formed from halohydrin molecules by reaction with a base, which causes an intramolecular Williamson ether synthesis.

Explanation:

Epoxide, cyclic ether with a three-membered ring. The basic structure of an epoxide contains an oxygen atom attached to two adjacent carbon atoms of a hydrocarbon. The strain of the three-membered ring makes an epoxide much more reactive than a typical acyclic ether.

Answer:

sana makatulong stay safe po

A 15.0 mL urine from a dehydrated patient has a density of 1.019g/mL. What is the mass of the sample, reported in mg?

Answers

Answer:

Mass of sample in mg = 15,285 mg

Explanation:

Given:

Volume of urine sample = 15 ml

Density of sample = 1.019 g/ml

FInd:

Mass of sample in mg

Computation:

Mass = density x volume

Mass of sample in mg = Volume of urine sample x Density of sample

Mass of sample in mg = 1.019 x 15

Mass of sample in mg = 15.285 gram

Mass of sample in mg = 15.285 x 1,000

Mass of sample in mg = 15,285 mg

A molecule of composition is replicated in a solution containing unlabeled (not radioactive) GTP, CTP, and TTP plus adenine nucleoside triphosphate with all its phosphorus atoms in the form of the radioactive isotope 32P. Will both daughter molecules be radioactive

Answers

Answer:

Please find the complete question in the attached file.

Explanation:

It would only be radioactive if the DNA molecule that employed the poly-T rand as templates. Its other molecule of the daughter would not have been radioactive as it did not need dATP for its replication. While each strand of the second molecule includes t, simultaneous reproduction dATP from both daughter molecules is needed so that each of those is radioactive.

The limiting reactant in a chemical reaction is the reactant __________ Select one: A. for which you have the lowest mass in grams. B. which has the lowest coefficient in the balanced equation. C. which has the lowest molar mass. D. which is left over after the reaction has gone to completion. E. None of the above.

Answers

Answer:

i think its A

How much energy does an X-ray with an 8 nm (8 x 10-9m) wavelength have?
A. 1.99 x 10-25 J
B. 3.33 x 1016 J
C. 2.48 x 10-17 j
D. 8.28 x 10-26 J

Answers

Answer:

it would be option C

Explanation:

Speed of light = 3×10^8m/s

Planck's constant = 6.626×10^-34 Js

Wavelength = 8 x 10^-9 m

Energy = [(3×10^8) * (6.626×10^-34)] / 8 x 10^-9

Energy = [19.878×10^(8-34)] / 8 x 10^-9

Energy = 2.48475 × 10^(-26+9)

Energy = 2.48×10^-17 J

Emily spills concentrated sodium hydroxide solution on her lab bench. What she should do first?

Answers

Answer:

Explanation: hell noo

Emily must notify the Instructor of the Lab/Classroom.

You are an intermediate product of an industrial process which intends to separate iron from its ore. A well known iron ore is hematite. Which of these ores does not contain iron?
Goethite
Malachite
Siderite
Limonite

Answers

Answer:

Malachite

Explanation:

Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!

This week's imide synthesis involves two reactions. In the first reaction (24A), a(n) ________ bond is formed between the two reactants. Hint: What type of functional group is formed

Answers

Answer:

C - N Bond formation.

Explanation:

Imide synthesis is a chemical reaction in organic chemistry which consists of two acyl groups which bond to nitrogen atom. The compound structure is related to acid anhydrides. Imides are monoacyl which are used as valuable intermediates in organic synthesis.

2KClO3 (s)⇄2KCl (s)+ 3O2 (aq) equilibrium constant

Answers

Answer: The equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]

Explanation:

The equilibrium constant is defined as the ratio of the concentration of the products to the concentration of reactants each raised to the power of their stoichiometric coefficients.

The concentration of all the solids and liquids are considered to be 1 in the expression of equilibrium constant

For the given chemical equation:

[tex]2KClO_3(s)\rightleftharpoons 2KCl(s)+3O_2(aq)[/tex]

The expression of equilibrium constant follows:

[tex]K_{eq}=[O_2]^3[/tex]

Hence, the equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]

Given the balanced reaction: Zn + 2HCl → H2 + ZnCl2
If 5 grams of each reactant are available for the reaction and HCl is known
to be the limiting reactant, which of the following is correct?
O Both reactants will be completely used up.
O There will be excess of both reactants remaining.
O HCl will be completely used up while Zn will remain in excess.
O Zn will be completely used up while HCl will remain in excess.

Answers

Answer:

O HCl will be completely used up while Zn will remain in excess.

Explanation:

Zn + 2HCl → H₂ + ZnCl₂

In reactions involving two reactants, if one of them is the limiting reactant then the other one has to be the reactant in excess.

Meaning that in this case, the reaction will proceed until HCl is completely used up, and a certain amount of Zn will remain (thus being the reactant in excess).

Write the molecular formula for the compound that exhibits a molecular ion at M+ = 112.0499. Assume that C, H, N, and O might be present, and use the exact masses below: Exact mass of carbon = 12.000 Exact mass of hydrogen = 1.0078 Exact mass of nitrogen = 14.003 Exact mass of oxygen = 15.995 (The order of atoms should be carbon, then hydrogen, then the others in alphabetical order. If there is more than one answer, just give one. ) Molecular formula:

Answers

Answer:

C₅H₈N₂O

Explanation:

The molecular formula denotes the various forms of atoms contained in a molecule at a particular fixed proportion.

The molecular ion M⁺ = 112.0499

and the exact mass values are given as follows:

C = 12.000

H = 1.0078

N = 14.003

O = 15.995

By assumption:

C = 12.000 × 5 = 60.0000

H = 1.0078 × 8 =    1.0078

N = 14.003 × 2 =  28.0060

O = 15.995 × 1 =   15.9950    

                        = 112.0634    

This is approximtely equal to 112.0499.

As such the Molecular formula for the compound = C₅H₈N₂O

What is the molar mass of Na2SO4?
O A. 142.04 g/mol
O B. 71.05 g/mol
O c. 238.22 g/mol
O D. 94.04 g/mol

Answers

I believe its D due to my thinking

Answer: A. 142.04 g/mol

Explanation:

Hydrogen bonds within liquid water are attractions between protons and hydroxide ions. are dipole-dipole attractions. are ion-induced dipole attractions. are attractions between protons and oxygen nuclei. are attractions between two hydrogen atoms.

Answers

Answer:

true because the bonds cannot be broken down

Air bags are activated when a severe impact causes a steel ball to compress a spring and electrically ignite a detonator cap. This causes sodium azide (NaN3) to decompose explosively according to the following reaction. 2 NaN3(s) --> 2 Na(s) 3 N2(g) What mass in grams of NaN3(s) must be reacted in order to inflate an air bag to 79.5 L at STP

Answers

Answer:

154 g

Explanation:

Step 1: Write the balanced decomposition equation

2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)

Step 2: Calculate the moles corresponding to 79.5 L of N₂ at STP

At STP, 1 mole of N₂ occupies 22.4 L.

79.5 L × 1 mol/22.4 L = 3.55 mol

Step 3: Calculate the number of moles of NaN₃ needed to form 3.55 moles of N₂

The molar ratio of NaN₃ to N₂ is 2:3. The moles of NaN₃ needed are 2/3 × 3.55 mol = 2.37 mol.

Step 4: Calculate the mass corresponding to 2.37 moles of NaN₃

The molar mass of NaN₃ is 65.01 g/mol.

2.37 mol × 65.01 g/mol = 154 g

write the formula two atom of iron and three atoms of oxygen​

Answers

Answer:

Fe2O3 is the formula this is your correct answer

1. Determine the volume of SO2 (at STP) formed from the reaction of 96.7 mol FeS2 and 55.0 L of O2 at 358 K and 1.20 atm.
4 FeS2(s) + 11O2(g)  2Fe2O3(s) + 8SO2(g)

Answers

Answer:

40.0L of SO2 are produced

Explanation:

To solve this question we need to find the moles of O2 using PV = nRT in order to find the moles. Thus, we can find the limiting reactant and the moles (And volume) of SO2 produced as follows:

Moles O2:

n = PV/RT

n = 1.20atm*55.0L / 0.082atmL/molK*358K

n = 2.25 moles of O2.

Clearly, limiting reactant is O2.

The moles of SO2 produced are:

2.25 moles of O2 * (8mol SO2 / 11mol O2) = 1.6351 moles SO2

Volume SO2:

V = nRT/P

V = 1.6351 moles SO2*0.082atmL/molK*358K / 1.20atm

V = 40.0L of SO2 are produced

Other Questions
El Espritu Santo es alma porque?Por favor how are baby's made full explanation with details please help simplify -5--44i have no idea write an analysis essay that compares and contracts two poems, one by Walt Whitman and one by Emily Dickson Whats the answer please. You AND six friends play on a basketball team. A sponsor paid $100 for the league fee for the season, x dollars for EACH players T-shirt, and $68.25 in total for trophies. Write a simplified expression for the total amount the sponsor paid for the season please help quick i will give brainlist Major Accomplishments of Alice Walker? ARTS :true. or. false. A single-celled organism can be classified as a prokaryote based on the absence of- A lens with a focal length of 15 cm is placed 45 cm in front of a lens with a focal length of 5.0 cm .Required:How far from the second lens is the final image of an object infinitely far from the first lens? a Worde question. Based on the sentence and the definitions, what is themeaning of insular?O joined in sadnessO isolated from othersO determined and quietapartandseparated and religious. What makes radioisotopes useful for dating objects?O A. They have unique emission spectra.O B. They decay at a predictable rate.C. Their decay products are easy to detect.O D. They all have extremely long half-lives. 4 x 3 x + 2 y (simplify) A number of households in Florida were selected to participate in a trash recycling program. Residents were encouraged to separate newspaper and aluminum products for collection. It was found that a brochure that informed residents about the nature of the program increased the number of people who participated in the program by separating their trash that could be recycled.Determine if this is an example of positive reinforcement, negative reinforcement, positive punishment, negative punishment, classical conditioning, or none of the above.A. Negative reinforcementB. Classical conditioningC. Positive reinforcementD. Negative punishmentE. Positive punishmentF. None of these Write the equation of the line that passes through the points (-8,-1) and (2,9). Put your answer in fully reduced point-slope form, unless it is a vertical or horizontal line. SOMEONE HELP ME PLEASE Please help me with this question what is this app and why are you reading this Colombia est dividida en entidades territoriales de diferentes niveles. estas entidades son de niveles superiores e inferiores. Gracias al sistema jurdico y legal, la Constitucin, posibilita la creacin de las reas metropolitanas, comunas y corregimientos, y prestan servicios a la poblacin. A cul grupo de entidades superiores e inferiores hace referencia el escrito? A. Municipios y territorios indgenas.B.Departamentos, distritos, municipios y territorios indgenas.C.Departamentos y territorios indgenas.D.Departamentos, distritos y territorios indgenas.E.Distritos y municipios y territorios departamentales..