Answer:
The Correct IUPAC name is H3C - CH (CH3) - CH (C2H5) - (CH2)2 - CH3 Class 11
Explanation:
yes searched np is maybe right i not 100% sure i 50% is it right >:) tell if u got it right >:D
Answer:
4-ethyl-6-methyl-3-heptene
Explanation:
Longest chain is seven long so it is heptane
But there is a double bond, so that becomes heptene
The double bound starts on the third carbon, so it is 3-heptene (this tells us where the double bond is)
Now we just got to do the substituents!
There is a ethyl group of the fourth carbon and then a methyl group on the sixth!
Ergo, 4-ethyl-6-methyl-3-heptene
Calculate the change in temperature of a 5.0 g sample of water that loses 1800J of heat energy.
Q = mcΔT
The specific heat of water is 4.18 J/g°C.
Taking into account the definition of calorimetry, the change in temperature of a 5.0 g sample of water that loses 1800J of heat energy is 86.12 C.
In first place, calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Sensible heat is the amount of heat that a body can receive or give up without affecting its molecular structure. If the molecular structure does not change, the state (solid, liquid, gaseous) does not change. Since the molecular structure does not change, a change in temperature is observed.
In other words, sensible heat is the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
So, the equation that allows to calculate heat exchanges is:
Q = c× m× ΔT
where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
In this case, you know:
Q= 1800 J c= 4.18 [tex]\frac{J}{gC}[/tex] m= 5 g ΔT= ?Replacing in the expression to calculate heat exchanges:
1800 J= 4.18[tex]\frac{J}{gC}[/tex]× 5 g× ΔT
Solving:
1800 J ÷ (4.18[tex]\frac{J}{gC}[/tex]× 5 g)= ΔT
ΔT= 86.12 C
In summary, the change in temperature of a 5.0 g sample of water that loses 1800J of heat energy is 86.12 C.
Learn more:
brainly.com/question/11586486?referrer=searchResults brainly.com/question/24724338?referrer=searchResultsLook at the Recording station detector on the upper left side of the Gizmo. What happens when the seismic waves hit the recording station?
Answer:
I don’t know what recording station you’re referring to but, When seismic waves reach the seismograph, a graphical record, or seismogram, is produced
Explanation:
The seismic waves hitting the recording station has been resulted in the seismograph, that has been evident of the earthquake.
The seismic wave has been the radiation, with the result of the movement of the earth surface. The movement has been result in the earthquake.
The intensity of the earthquake has been measured by seismograph on the Richter scale. The seismic wave results in the movement of the leads to the production of the seismograph.
The seismic waves hitting the recording station has been resulted in the seismograph, that has been evident of the earthquake.
For more information about earthquake, refer to the link:
https://brainly.com/question/1296104
What can you say about the reactants of photosynthesis and the products of cellular respiration?
Answer:
The reactants of cellular respiration are oxygen and sugar, which are the products of photosynthesis
Explanation:
water is formed when 48g of oxygen combine with 6g of hydrogen. what mass of oxygen combines with 2g of hydrogen
Answer:
16g of oxygen reacts with 2 g of hydrogen to form 18g of Water
This table displays which one is it A. Price values of the metals ,B. Physical properties of the metals ,C. Chemical properties of the metals ,D. Corrosive resistance of the metals
Answer:
b the physical components
When a substance is heated ,the kinetic energy of its molecules
Answer:
When a substance is heated ,the kinetic energy of its molecules also increase.
Explanation:
K.E is directly proportional to T
density is 6g/mL and volume is 40 mL what is the mass
Answer:
240g
Explanation:
Using the equation m=pV, where m=mass, p=density, and V=Volume
m=(6)(40)=240
m=240
Suppose that you experimentally determine the molar extinction coefficient (ε) of a complex ion sample to be 8171 L/mol-cm at 510 nm. The literature value for the ε of the complex ion sample is reported as 8400 L/mol-cm. What is the percent purity of your experimental sample
The percent purity of your experimental sample is 97.3 %
The percentage purity % = impure value/pure value × 100 %.
Actual value of molar extinction coefficient = impure value = 8171 L/mol-cm, pure value = literature value = 8400 L/mol-cm.
Substituting the values of the variables into the equation, we have
% purity = 8171 L/mol-cm/8400 L/mol-cm × 100 %
% purity = 0.9727 × 100 %
% purity = 97.27 %
% purity ≅ 97.3 %
The percent purity of your experimental sample is 97.3 %
Learn more about percentage purity here:
https://brainly.com/question/17836636
Is cobalt(II)oxide ionic or covalent
[tex]\small{\green}\fcolorbox{blue}{cyan}{\bf{\underline{\red{\color{red}Answer}}}}[/tex]
[tex]{\huge{\fcolorbox{yellow}{red}{\orange{\boxed{\boxed{\boxed{\boxed{\underbrace{\overbrace{\mathfrak{\pink{\fcolorbox{green}{blue}{Ionic}}}}}}}}}}}}}[/tex]
The compound cobalt(II)oxide is an ionic compound.
An ionic compound is a composed composed of a metal and a nonmetal. Hence the compound is actually an ion pair. The ion charges in the compound must be balanced.The compound cobalt(II)oxide is composed of a metal (cobalt) and a nonmetal (oxygen) hence the compound cobalt(II)oxide is an ionic compound.Hence, the fact that cobalt II oxide is comprised of a cation and an anion means that it us an ionic compound.
Learn more about ionic compound:https://brainly.com/question/9167977
Word Equation for Magnesium reacting with Iron Chloride
Answer:
3Mg+2FeCl3------------3MgCl2+ 3Fe
balance CHCl3 + O2 = CO2 + H2O + Cl2
Answer:
2CHCl3 + 5/2 O2 => 2CO2 + H20 + 3Cl2
Explanation:
Left Hand Side(LHS)
We have CHCl3 and O2
Right Hand Side(RHS)
We have CO2, H2O and Cl2
Balancing
To make sure that they have same values, put 2 before CHCl3 giving 2CHCl3 and 3 on Cl2(RHS) for chlorine gas giving 3Cl2
H2O remains the same
Before CO2 put 2 giving 2CO2
To make sure that oxygen is balanced put 5/2 before it. This gives 5/2 O2 (2 cancels out don't worry)
Combining all;
2CHCl3 + 5/2 O2 => 2CO2 + H20 + 3Cl2
I hope this helps. Have a nice studies.
How might a molecule have a very strong molecular dipole?
Answer:
When you make the electronegativities of A(Positive partial charge) and C (Negative Partial charge) less and have B with a strong electronegativity to create a very strong molecular dipole. ... Both molecules possess strong molecular dipoles.
how long does it take to rehydrate after being dehydrated
Answer:
up to 120 minutes to digest water and rehydrate your body
8 Fe + S8 → 8 FeS, how many moles of iron (Fe) are needed to react with 8.49 moles of sulfur (S8)?
Based on the balanced equation, the mole ratio of Iron to Sulphur is 8 to 1.
This means that for every mole of sulfur, 8 moles of iron is needed for the reaction.
∴ since the moles of Sulfur = 8.49 moles
⇒ moles of Iron = 8.49 moles × 8
= 67.92 moles
please help pick more then one answer!!!
Select all the correct answers.
How will the results of the Human Genome Project benefit the future of genetics? (Select all that apply.)
A. Scientists can develop better diagnostic methods for genetic diseases.
B. Scientists can successfully prevent the occurrence of genetic diseases in humans.
C. Scientists can prevent the process of human aging.
D. Scientists can compare the genomes of humans and other different organisms.
E. Scientists can produce organisms more superior than humans.
Answer: A. B.
Explanation:
Describe how you could adjust the settings of the simulation to increase the number of red (H3O+) and blue (A-) particles in the solution of equilibrium. In three to four sentences, justify your answer and explain how and why this would change the pH of the solution.
The circumstances that the system is exposed to may be altered in such a way as to cause a change in the chemical equilibrium. When we do this, we are said to be "stressing the balance."
In a chemical process that has reached equilibrium, one method is to either add or remove a product or a reactant. When more of a reactant is introduced, the equilibrium changes to alleviate the pressure, which results in the production of more products.
This is further explained below.
how and why this would change the pH of the solution.?Generally, When more product is introduced, the equilibrium moves away from products and toward reactants in an effort to lower the level of stress.
In the event that either the reactant or the product is withdrawn from the system, the equilibrium changes such that more of the corresponding substance is produced to compensate for the loss.
According to Ch/atelier's Principle, which claims that if a reaction in equilibrium is disturbed, the equilibrium will change to counterbalance that change, this indicates that if a reaction is in equilibrium, the equilibrium will alter to counteract that change.
If a solution has a large number of hydrogen ions, the pH of the solution will be low, and it will be classified as an acidic solution.
In conclusion, On the other hand, a solution is said to have a high pH and be in the basic state if it contains a low quantity of hydrogen ions in its composition.
The ratio of the concentration of hydrogen ions to the concentration of hydroxide ions is negative and inversely proportional.
Read more about equilibrium
https://brainly.com/question/28527601
#SPJ1
4NaCl + 2SO2 + _____H2O + _____O2 → _____Na2SO4 + 4HCl
Which numbers balance this equation?
- 1,2,4
- 1,2,2
- 2,1,2
- 2,1,4
The numbers that balance the following equation: 4NaCl + 2SO2 + H2O + O2 → Na2SO4 + 4HCl is 2, 1, 2.
BALANCING EQUATION:
Balancing a chemical equation means to make sure that the number of atoms of each element on both sides of the equation are equal. According to this question, the following chemical reaction are given: 4NaCl + 2SO2 + H2O + O2 → Na2SO4 + 4HCl Some of the coefficients (numbers) have been placed there while some are missing. The equation that includes the missing coefficients (numbers) to balance the equation is:4NaCl + 2SO2 + 2H2O + O2 → 2Na2SO4 + 4HCl
Learn more at: https://brainly.com/question/21049751?referrer=searchResults
Answer:212
Explanation:yeah
Help with this question which I attached a picture of
[tex]\huge\underline\mathtt\colorbox{cyan}{A. Element L}[/tex]
Explanation:
Because the unidentified element has exactly the same Bright-Line Spectra of wavelength in nanometeres as does element L.
[tex]\huge\bold{\purple{\bold{⚡BeBrainly⚡}}} [/tex]
Who know the answers for both of these or know were to get them from
Answer:
kdkekejdjejeneneenendjenejekeke do do do do do do d
Answer:
go ahead bro
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
how many moles are present in 10.0 grams of sodium hydroxide
Answer:
0.25
Explanation:
no.of moles =10/40
Chemical & Earth Science Name:______________________________________
Date: ________________________________
Nonmetals & Metalloids Worksheet
Write the letter of the correct answer on the line at the left.
1. _____ Which of the following is NOT a
property of most nonmetals?
A found on the right side of the
periodic table
B solids tend to be dull and brittle
C excellent electric conductivity
D many are gases at room temperature
3. _____ Two of the same atoms bonded
together is called a(n)
A isotope
B diatomic molecule
C binary atom
D semiconductor
2. _____ The only nonmetal in Group 14 is
A carbon
B oxygen
C nitrogen
D fluorine
4. _____ The highly reactive nonmetals of
Group 17 are called the
A noble gases
B metalloids
C halogens
D actinides
If the statement is true, write true. If the statement is false, change the underlined word
or words to make the statement true.
5. ___________________ Atoms of nonmetals usually lose electrons when they combine
with other atoms.
6. __________________ When two or more atoms bond by sharing electrons, they form
a molecule.
7. __________________ The elements that have some properties of metals and some
properties of nonmetals are called halogens.
8. __________________ Helium has chemical properties so different from those of the
other elements that it cannot be placed in any group.
9. __________________ Substances that can carry electric current under some
conditions but not under others are called semiconductors.
10. __________________ The Group 15 element oxygen is used to make compounds
known as fertilizers.
Answer:
whoa this question is long
Explanation:
how did u write it gosh
Sulphuric acid (H2SO4) is titrated against 25.00cm3 of 0.200 mol/dm3 Sodium hydroxide solution (NaOH). It is found that 23.20 cm3 of sulphuric acid is required for neutralization. Calculate the concentration of Sulphuric acid
.
Approximately now much energy will it take to
break all the bonds present in the molecule below?
Answer:
498 kj/mol
Explanation:
Chemical reactions occur as a result of bond breaking and bond formation.
The bonds in reactants are broken and atoms are rearranged to form new bonds.
During bond breaking energy is absorbed to break the bonds of reactants while bond formation involves the release of energy during the formation of new bonds.
In our case;
In 1 mole of the Oxygen molecule, there is one O=O bond
Energy absorbed to break O=O is 498 kJ/mol
Therefore, the ΔH required to break all the bonds in one mole of Oxygen(O₂) molecules is 498kJ/mol.
Note that, bond breaking is endothermic since energy is absorbed from the surroundings.
mark brainliest pls
Water is continuously changing state and moving from place to place in the water cycle. This diagram shows these processes and movements. (Bro there's no science AHHHH)
Answer: bro- i have no idea wat science that is but heres the water cycle-
How does Bone Marrow Donor Program work?
Name some diseases that can be cured by bone marrow transplant.
What is Donors’ Registry Program?
noooooooooooooooooooooo
Which of the following correctly completes the statement?
Cations are always _____ than the parent atom and anions are always _____ than the parent atom.
Answer: smaller, larger
Explanation:
Cations are always {smaller} than the parent atom. Anions are always {larger} than the parent atom.
Cations are always smaller than the parent atom, and anions are always greater than the parent atom.
What is parent atom ?The term "parent atom" refers to an atom that has not yet undergone any chemical transformation. A parent atom is one that is discovered in its initial state.
Because they contain fewer electrons while maintaining the same nuclear charge, cations are always smaller than their parent atoms. Because the protons in the nucleus are holding the remaining electrons more tightly, their radii are less than those of the parent atoms. In the case of anion, this is the opposite.
Due to variations in electron-electron repulsion, the ionic radii of cations and anions are always less or bigger than the parent atom, respectively. The trends in ionic radius follow those in atomic size.
Thus, Cations are always smaller than the parent atom, and anions are always greater than the parent atom.
To learn more about parent atom, follow the link;
https://brainly.com/question/13673451
#SPJ6
Don't really understand the question
Answer:
Did they mean those diagrams are the salt or what?
suitable electrolytes for fuel cells
Answer:
Alkaline fuel cells use an alkaline electrolyte such as potassium hydroxide or an alkaline membrane that conducts hydroxide ions rather than protons.
Explanation:
OR USE GATORADE AND POWERADE. BE A MAN.
the basic fact that determines molecular shapes is that
Answer:
The shape of a molecule is mostly determined by repulsion among the pairs of electrons around a central atom.
How many formula units are in 0.0022 mol of NaCl (it’s urgent plz)
Answer:
1.204 × 10²¹ unitsExplanation:
The number of formula units can be found by using the formula
N = n × L
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 0.002 × 6.02 × 10²³
We have the final answer as
1.204 × 10²¹ unitsHope this helps you